Crystal 10 Reports fail with error: "Load Report Failed"

Hi,
this seems to be a mystery. A client has Crystal 10 reports run from a Visual Studio 2003 application (.NET 1.1) running fine on and old server.
Once the .NET application is installed on a new Windows 2003 server, all Crystal 10 reports fail with the error message: "Load report failed" Source: CrystalDecisions.CrystalReport.Engine.
I set the worker process in the application pool to "system admin" and all Crystal reports failed. I had thought it was a security issue. I even removed Crystal 10 and installed Crystall XI Developer Edition and all reports raised the exact same error message from CrystalDecisions.CrystalReport.Engine.
Crystal does call the stored procedure to retrieve the data but cannot load the PDF. I have used 3 different physical servers, one Win 2003 64-bit and two Win 2003 32-bit and get the same error.
Help!
Thanks

Hi Mak,
It seems that you are having issue with SDK's.
Post your question in Business Objects SDK Application Development ->
.NET Development - Crystal Reports Forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK's queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Shweta

Similar Messages

HT201210 I attempted to update my IPAD to IOS6 and it failed, following this restore keeps failing with error stating recovery failed. I am stuck. I have reset several times and retried recovery mode only to get the same endless loop of trouble. Please

I tried to update my IPAD to IOS6 and it failed following this recover mode will not wortk either. I have reset multiple times and tried recovery again only to get the same error stating that recovery failed. The error states unknown recovery error. My system OS is up to date with OS X 10.7.5. Itunes is up to date with 10.7 (21).

Try:
- Powering off and then back on your router.
- The Additional Information paragraph of
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

ITunes update fails with error 2324, uninstall fails with 2324 as well, no way to run itunes

I have not used itunes for a year or so. Every time I turn on my Windows 7 x64 desktop, the update fails.
This time I tried to update and got the failure code 2324. I then decided to just uninstall and start over. The uninstaller gives me the same error code. When I try to run the old version of itunes that worked for quite some time I get an error stating the program is not compatible with my operating system.
I am stuck and I cannot call support during normal business hours because I work for a living and won't be in front of my home desktop.

Try to unistall it clean using that microfoft utility
http://support.microsoft.com/mats/program_install_and_uninstall/
make sure to get rid of all apple stuff using that program, one by one.
Then download installer again, but before disable all firewalls and antivirus.
and install.
Sorry, right after response found that thread:
https://discussions.apple.com/thread/4378768?start=0&tstart=0

SQL Server Agent job between 2 instances fails with Error 18456 - Login Failed for user

Hi,
SQL Server version: 2012 EE
OS: Windows 2008 R2 Enterprise
In my server, i have 2 instances, and I am trying to configure a SQL Server Agent job to query one table in Instance A, and insert some modified data in Instance B, both in the same server.
When i execute the job in instance A, i get the following error:
Executed as user: NT SERVICE\SQLSERVERAGENT. Login Failed for user "NT SERVICE\SQLSERVERAGENT". [SQLSTATE 28000] (Error 18456). The step failed.
I have already configure instance A as Master and disabled encryption, by changing the parameter MsxEncryptChannelOptions to 0 in regedit. I've also made my target instance (instance B) as a Target.
What am i missing?
Thanks for your attention and pacience

Hello,
The NT SERVICE\SQLSERVERAGENT (virtual) account is not available on the other as you just mentioned. That is the reason for the login
failed error. Try using a Windows login as the
SQL Server Agent service account in both servers, the same Windows login (not a virtual account), and run jobs as the “sa” account.
http://msdn.microsoft.com/en-us/library/ms345578.aspx
You can also try a proxy account.
http://technet.microsoft.com/en-US/library/ms190698(v=SQL.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Backup failed with error: 11 -Error: (-41) SrcErr:NO Copying

Like many of you, I was unlucky to get the famous TimeMachine error message: "The backup was not performed because an error occurred while copying files to the backup disk". I started to get as much help as I could from Google and all your forum posts.
Until recently I could not get an easy answer and it seemed that various people had success by:
- renaming their machine to remove say extraneous characters (such as apostrophe)
- delete the last "in progress" backup
- reset the TM
- etc.
I did all of that plus reformatting my new WD HDD but nothing changed. After 2 days of frustration with this piece of software (Time Machine), the good news for me is that I can consistently reproduce the error as well succeed in performing a backup. The solution for me seems to make sure that I +*do not have a source directory structure deeper than 15 levels*+. As soon as I have a file that is 16 levels deep from the root of the HDD that I try to backup, I get this error:
+*Error: (-41) SrcErr:NO Copying /Volumes/<HDD to Backup>/<Deep Directory Structure>... to*+
+*/Volumes/<Your TM Drive>/Backups.backupdb/<Your Machine>/<Timestamp>.inProgress/<AutoGenerated-GUID>/<HDD to Backup>/<Deep Directory Structure>...*+
+*Copy stage failed with error:11*+
+*Backup failed with error: 11*+
The Console app shows the system log with the path to the file that failed during backup. I tried to make the pathname shorter than 255 characters to make sure this is not an 8bit limitation of some string length in the code. Even if I have a path shorter than 255 characters, TM fails with the above error when the source files are at least 16 levels deep in the directory structure.
What is most frustrating about this is not the careless and uninformative error message or this apparently non-sense limitation of 15 levels - it might be something historical in Apple's code - but the lack of documentation. In the absence of proper logging and error handling in this piece of code, wouldn't be nice to have some explanation from Apple with regards to what this error #11 means or perhaps what caused this "Error (-41) SrcErr:NO Copying"? I guess most of us would be just fine to know that as per release notes, Apple has this limitation of 15 levels for the source directory structure.

solongpc wrote:
Regardless if this is a general problem or not, does anyone know of any documentation/release notes for common/generic TM error codes? That would be helpful.
Yeah, many of us would love it! But no such thing exists, at least not that us mere mortals can find.
There might be another variable that I don't understand right now but at least it is consistent.
Could it be something funky in the name of one of the folders? Or could the folder object itself be corrupt? Or have some odd extended attribute?
All I can suggest is calling AppleCare, and/or reporting it as a bug:
*_Submitting a +Bug Report+ to Apple._*
|
This requires a membership in the +Apple Developer Connection,+ but you can get one for free.
Register here: http://developer.apple.com/programs/start/register/create.php
Once you receive the confirmation, go to: https://bugreport.apple.com and login.
Click +New Problem+ at the top.
Click Help at the top, and/or any of the items underlined in blue for more information.
Provide as much specific detail as possible, and attach a log, screenshot, etc., as appropriate in the lower section.
When done, click Submit at the bottom.

SCCM2012 - CcmSetup failed with error code 0x80190191

I can't get client push working. Getting these errors:
CcmSetup failed with error code 0x80190191
Failed to download files through BITS. Error: 0x80190191, Description HTTP status 401: The requested resource requires user authentication.
, Context: The error occurred while the remote file was being processed.
I still have SCCM 2007 running with existing boundaries as I am trying to migrate. Is that the problem? I found an article similar from SMS 2003 to SCCM 2007 so I'm not sure if it applies.
Site servers are 2008 R2
GPO startup script is working.
Ideas? Thanks!

I just enabled Windows Authentication in IIS... Let's see what happens. I'm frustrated as this was working about a month ago when I tested it to a limited group.
Didn't work. I restarted the default web site. Restarted server too. Enable basic authentication?
I found similar issues regarding bits authentication and WSUS but nothing seems to help yet.
Also, prior to the errors I'm getting these warning which are actually inaccurate...
File 'C:\Windows\ccmsetup\vcredist_x86.exe' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\MicrosoftPolicyPlatformSetup.msi' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\SCEPInstall.exe' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\client.msi' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)

Crystal Reports with VS2005 - Load Report failed Error....

Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Rajesh

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Deploying Crystal Reports with IIS - Load Report Failed

Post Author: jeremyrarextreme
CA Forum: Deployment
Hi
We have installed Crystal Reports Developer XI release 2 with Visual Studio 2005 to implement a very simple app that allows a crystal report to be loaded via the web. This works perfectly fine when I publish my build from Visual Studio 2005 (using the built in cystal controls) and go view in browser.
Everything looks fine when I run the app from Visual Studio by clicking view in browser - the crystal report loads and everything is how it should be.
When I publish the build on our production server (a Windows 2003 server running IIS6) I get the error: Load Report Failed
A full detailing of this error can be found on this forum post: http://aspadvice.com/blogs/rjdudley/archive/2005/05/18/2591.aspx
where many other people are having the same issue.
I have struggled for a very long time to find a solution to this, how do I resolve this issue?
when I try to view the .net 2.0 project from a browser running through IIS It displays the business objects toolbar but returns the error: Load Report Failed
When I run this in my development environment directly from Visual Studio 2005 it works perfectly fine and loads the report.
The report path is perfectly fine and correct, we have permissions on all folders for read, write and execute for both general user / admin accounts and IIS accounts on the Windows 2003 Server.
We also have full permissions on c:/temp and c:/windows/temp
What else can I do to make this work!
Many thanks and awaiting your reply

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Report failing with error

Hi All,
Application R12.1.3 with Shared Application Tier 2 nodes
Database : 11g R 11.2.0.2 with RAC 2 nodes with ASM
We have a concurrent program which gets fired when submitted thru API . For each order program is run once . If there are more orders it will run n number of times . At this time one request is failing with error
REP-0004:
REP-0069:
REP-57054:
But for the same failed request when we run separately(with same parameters) it is completing Normal . There is no other error in Manager Logs.
please help what can be the issue.
thanks
Mapps

Please see the following docs/links.
Concurrent Processing - Concurrent Reports Failing With Errors REP-0004,REP-0082 and REP-0104 [ID 844976.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-0004+AND+REP-0069+AND+REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
If the links did not help, please enable trace/debug and see if you get more details about the error and post the contents of the log file then -- How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
Thanks,
Hussein

Request of one report fails with error: unable to extend tablespace

Hi All,
When I submit one request of report, the request end up with error:
unable to extend temp segment by 128 in tablespace XXXX
The request costs too much tablespace in short time, but the temp is about 20 G large.
The sever have been add storage recently, but I don't know whether it is related to the performance issue, because the request had not such issue.
How do I deal with it ?
Thanks,
Xinya

What report is it ?
Did you try and search metalink ?
How to handle 'ORA-01652: unable to extend the temp segment by 128 in tablespace' error messages? (Doc ID 1359238.1)
R12 Journal Entries Report (XLAJELINESRPT) Has Performance Issue Or Fails With Error: "java.sql.SQLException: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1" (Doc ID 1141673.1)
This forum may be the right one for your question - General EBS Discussion

Can't print more than 75 reports... Load report failed

Hi,
I have a problem: I can't print more than 75 reports without restarting my application.
I'm using VB, Visual Studio 2005 and Crystal Reports Developer XI Release 2.
It's a windows application.
In the following examples I'm exporting to pdf but the same hapens if I put it on a viewer.
I tried to do some tests to find out the problem. I don't have a solution yet
Test 1:
I made a cycle printing 100 times the same report. I used the code from an example that was in the BusinessObjects website and just put it into a cycle. At 75 I get the error "Load Report Failed"
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
Dim ExportFolder As String = Application.StartupPath + "\export"
If Not IO.Directory.Exists(ExportFolder) Then
IO.Directory.CreateDirectory(ExportFolder)
End If
For i As Integer = 1 To 100
Dim crReportDocument As ReportDocument
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
''The path/location where the exported file will be saved
Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
''Create an instance of the Chart report
crReportDocument = New Chart()
''Set the options for saving the exported file to disk
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = exportFilePath
crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
''Export the report
crReportDocument.Export()
Next
Test 2:
I try to insert a "crReportDocument.Dispose() after the Export. It takes more than 1 minute doing the dispose and lots of time processing the 2nd report (more than 2 minutes)
Dim ExportFolder As String = Application.StartupPath + "\export"
If Not IO.Directory.Exists(ExportFolder) Then
IO.Directory.CreateDirectory(ExportFolder)
End If
For i As Integer = 1 To 100
Dim crReportDocument As ReportDocument
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
''The path/location where the exported file will be saved
Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
''Create an instance of the Chart report
crReportDocument = New Chart()
''Set the options for saving the exported file to disk
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = exportFilePath
crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
''Export the report
crReportDocument.Export()
' Dispose
crReportDocument.Dispose()
Next
Test 3
Same as Test3 but with ReportDocument.Close() before the dispose.
Still doesn't work, Close takes too long, just like Dispose...
Test 4
I tried using a global variable with the ReportDocument.
Instead of creating new instances of the ReportDocument, I keep using the same.
It works fine if I use always the same report file, but if I try to print 2 different reports the 2nd returns the error "Load Report Failed" and takes too long loading before the error.
Well, I made some researches on internet and I foud this, but still doesn't work with me, because Dispose always takes too long...
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2006/02/22/236.aspx
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2006/05/23/328.aspx
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2007/04/05/CrystalReportsMemoryLeakFixByJerryCote.aspx
Can anybody help?
Thanks
Isabel
Edited by: Isabel Cabral on Aug 12, 2008 8:12 PM

Already tried that, then I get another problem...
After exporting the first report, takes 1 or 2 minutes doing the Close and the Dispose, and after that it takes too long trying to load the next report (after 1 hour I give up!).
This is the code I'm using to do the tests:
        'Create the export folder
        Dim ExportFolder As String = Application.StartupPath + "\export"
        If Not IO.Directory.Exists(ExportFolder) Then
            IO.Directory.CreateDirectory(ExportFolder)
        End If
        For i As Integer = 1 To 100
            Dim crReportDocument As ReportDocument
            Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
            ''The path/location where the exported file will be saved
            Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
            ''Create an instance of the Chart report
            crReportDocument = New Chart()
            ''Set the options for saving the exported file to disk
            crDiskFileDestinationOptions = New DiskFileDestinationOptions()
            crDiskFileDestinationOptions.DiskFileName = exportFilePath
            crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
            crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
            crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
            ''Export the report
            crReportDocument.Export()
            'Close and dispose
            crReportDocument.Close()
            crReportDocument.Dispose()
        Next
Thanks,
Isabel

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Inventory load failed... OPatch cannot load inventory for the given Oracle Home.OPatch failed with error code = 73

Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home       : *****
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.1
OUI version       : 11.2.0.2.0
OUI location      : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?

Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards,

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

Partition failed with error input output

Hi All,
I installed a new hard drive (WD 500G) into my 2006 Macbook, Mac OS X 10.4.10. I also increased the RAM to 2G. My Macbook reconized the hard drive. However, I followed the steps below to format the HD, but got the partition failed with error input output msg.
1. Went to Disk Utility, selected the name of new hard drive in the sidebar.
2. Select the Partition tab, and selected 1 partition from the drop down menu.
3. Click Options, then choose GUID .
4. Select Partition
In previous posts someone suggested updating the softward to 10.4.11 or the erasing the HD, but erasing the hard drive would take 13 hours according to my Macbook. Any suggestions? Please Help!

The error usually means the drive is bad. But you can try this:
Erase and Install OS X
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has finished quit DU and return to the installer. Install OS X.

Crystal 10 Reports fail with error: "Load Report Failed"

Similar Messages

Maybe you are looking for