Crystal 2008 can't "see" my tables but Version XI can.

I bought 2008 and tried to connect through ODBC to a progress databse. The tables that have names which include a dash "-" will not run. I tried version XI and it works fine with my same ODBC connection (.dsn) what can I do to correct this? I bought 2008. Can I rool this back or something?

Hi David,
Just try to create the connection with ODBC/ OLEDB with DSN connection and update the connection with the set datasource location and verify that you are able to see the tables in the CR XI version.
Else create a new connection to the existing one and verify the tables are retrieved or not.
Let us know if you have any queries.
Regards,
Naveen.

Similar Messages

My iMac can't see my MBP but my MBP can see my iMac

A network issue? I guess.
Both of my computers have Lion OS; the MBP is brand new and shipped with Lion. I upgraded my late 2009 iMac with Lion recently.
I want to transfer files from one to another.
In Finder - my MBP can see my iMac file stucture - but my MBP doesn't appear in Finder on my iMac.
Is there a simple solution so both computers have "equal eyes"? Now that would be great!
Cheers, Mal

If you have an account on the MBP you should be able to access it via the iMac. Can you log in from the MPB to the iMac? The problem is only from the iMac to the MBP?
First check the settings for File Sharing on the iMac and compare them to the settings in the MBP.
Now in Finder on the iMac you see the MBP in the shared section of the side bar, correct? If you click it you should be on the MBP as guest. Then in the upper right hand corner of the Finder window is the Connect As button. When you select that you get the window asking for your name and password. You have Registered User selected right? The name and password are the name an password for the MBP. If that is all correct you should get logged in.
You could try the Using an Apple ID and use the Apple ID you set for that account on the MBP.
That should work.
good luck

My ipad can't see my wifi, but my laptop can. wifi is turneded, I typed in my wifi name and pswd, still no access

My ipad doesnt see my wifi so I used other, typed in my wifi name and pswd and it still doesn't recognize it. Is there another place to define your wifi name?

Hi jumook!
You may want to check to make sure that your Wi-Fi settings are optimized by checking them against this website:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
You may also find some helpful information in this article, about troubleshooting Wi-Fi connections on an iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities!
Cheers,
Braden

Can't see my tables from a JDBC program

Hi there,
I have a JDBC program to connect to an Oracle 9i database. The problem is that I can't see the tables I create if I do something like "SELECT * FROM TAB" from a JDBC program and hence can't use them.
If I do the same statement from SQL * PLUS, I get the the full list of my tables including the ones I created. If i do that from JDBCTest.java, I don't get to see them. I do commit my statments and have tried committing from the Java program and from the SQL Plus after creating the tables....
Just to make sure I have checked myself, I am pretty sure that I am connecting with the same ID/Password in which I created my tables. I have also used schema.table to no avail... I have used scott/tiger and system/manager
If i try st.executeUpdate() for example, I get the error : java.sql.sqlException: ORA-00942: table or view does not exist...
Any help would be greatly appreciated
Thanx :)
Nav

Hi MOD,
hmmm. Sorry I am not an Oracle geek, but I am under system/manager and I created them all in there. I thought permissions are granted automatically. I tried to grant permissions to myself but had an error that I can't update them myself...
Can you plz elaborate on how to set permissions cuz actually i installed the database (password still default) and I am not sure if there is a dba other than system/manager who could grant me permissions...
It works on my home machine with the exact same version of Oracle and Java though and the same users and password :s
Any other thoughts
Thanx
NAV

Me or my pc can't see my songs, but they are still on my Ipod.

Me or my pc can't see my songs, but they are still on my Ipod.
I've connected my Ipod to my pc, and suddenly there were no songs left, but when I checked it, was the memory still full, like before.
I've disconnected my Ipod and suddenly there were also no songs on my Ipod aswell.
please help me!!

"There should be a solution I think"
Yes, to restore the iPod and reload the songs with whatever program you use to put songs on the iPod.
How do you manage to use iPod Agent to transfer songs to the iPod since this is what it says in the iPod Agent FAQ?
"iPod Agent is not a music manager. It does not provide the ability to organize your music and transfer it to your iPod. Apple's own iTunes does a great job of this and thus we don't see a reason to try to duplicate it's functionality. iPod Agent is meant to work hand-in-hand with iTunes."
If you don't use iTunes, what "library" do you use?

Why can i see the video but i can't hear anything

why can i see a video but i can't hear anything?

tlynne75 wrote:
I am afraid that the originals are already deleted
Have you checked the recycle bin? can you recover from card? No 2nd copy/backup? (shame on you).
You can try recovering Lr preview, but I recommend it only as LAST resort:
http://www.robcole.com/Rob/ProductsAndServices/PreviewExporterLrPlugin

Where can we see Fact Table And Dimension Table in DataWarehouse Workbench?

Hai Experts
where can we see Fact Table And Dimension Table in DataWarehouse Workbench?
Best Regards
nvnkmr12

Hi
Refer the link below and you will get a comprehensive explanation of how data is stored and modeled in BI. If explains fact table, dimension table, SID table, P and Q , X and Y tables.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
Cheers
Umesh

HT204053 I have installed the latest version of Apple but still can't see ICloud in System Preferences- how can I fix this?

I have installed the latest version of Apple but still can't see ICloud in System Preferences- how can I fix this?

Lion is required to see the iCloud Preference Pane: this is an upgrade, not an update, and has to be paid for. If you want to install Lion, go to the Mac App Store and purchase and download it there ($29.99).
First check that your Mac meets the requirements for Lion:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space

I can not see my screen, but I can listen to notifications, listen to music with headphones, and my button locked not responds

I can not see my screen, but I can listen to notifications, listen to music with headphones, and my button locked not responds

I believe the keys on an imac are F11 and F12, for dark / bright respectively.
Try that, I think it'll work.
If not, then try out all the "F" keys, one of them will work.
Ben

I have recently deleted several old backups from a portable usb drive (formated NTFS-3g(MacFUSE). The macmini can´t see it anymore but my imac does?

I have recently deleted several old backups from a portable usb drive (formated NTFS-3g(MacFUSE). The macmini can´t see it anymore but my imac does? The usb ports of the mac mini can still see my other drives formated with FAT32.

Thanks, it is working now, after I have installed NTFS3G.
I did not format the drive. I was using it as purchased to do backups for a while. After the corporate backup system was working correctly again I was using the disk at home for my homevideos. Since the corporate backup was running correctly for ten days in a row, I have decided to delete those backupfiles on the usb drive. Each backup was a folder consisting of almost 30GB data, mirroring the servers harddrive which is running on windows xp. After I have deleted those folders, only the video files remaind and I could not open the drive on the macmini anymore.

On my i-pod, the image is stuck on album cover and I can't see my playlist, but the music still playsr

On my i-pod, when I use i-tunes, the image is stuck on one album cover when I open i-tunes and I can't see my playlist. However, I can still play music on it. MC

When the iPod shows the connect to iTunes cren the iPod is already erased.
The iPod backup that iTunes makes does not included synced media like apps and music.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Do the download before restoring from iTunes backup

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.

Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

I recently had my iPhone 5c screen replaced. When I switch the phone on all I can see is a dark blue/navy backlight on the screen. The phone powers on although I can't see the apple logo. I can ring the phone a bad Siri is fully functional.

I recently had my iPhone 5c screen replaced. When I switch the phone on all I can see is a dark blue/navy backlight on the screen. The phone powers on although I can't see the apple logo. I can ring the phone a bad Siri is fully functional.
I Have tried to soft rest it but it does not work.
can anybody help?

Belly114 wrote:
Unfortunately because you have violated the warranty - it will cost £216.44. See https://www.apple.com/uk/support/iphone/repair/screen-damage/
Unfortunately, since an unauthorized party opened it, Apple won't have anything to do with it at all. It's not eligible for an out of warranty replacement.

HT1349 When the tech set up my new iPad last week, I can get email on IT, but now I can no longer get email on my Mac laptop. How can I correct that? Tish

When the tech set up my new iPad last week, I can get email on IT, but now I can't get email on my Mac laptop. What's wrong? Tish

It could be a POP account which means the first device which accesses the account gets the email unless the settings have been changed. Here are links to show what is involved. It may not mirror your circumstances though.
http://support.tigertech.net/outlook-2007-lmos
http://email.about.com/od/outlookexpressbackuphelp/qt/et_server_copy.htm

Crystal 2008 can't "see" my tables but Version XI can.

Similar Messages

Maybe you are looking for