Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

Similar Messages

  • Crystal Reports XI R2 on Windows Server 2008

    How can I deploy the CR runtime and run my reports made in CR XI R2 SP4 on Windows 2008 Server, given that the server is a 64 bit OS
    Some of my clients are planning to move my application on Windows 2008.
    MP

    Hi,
    Below are the Supported Operating Systems for Cystal Reports Server XIR2 SP2::
    [Windows Server 2008 is not supported with CR Server XIR2 SP2]
    Desktop Products :
    u2022 Windows 2000 SP4 Professional
    u2022 Windows XP SP1 Professional
    u2022 Windows XP SP2 Professional
    u2022 Windows Vista (All Editions)
    u2022 Windows 2000 SP4 Advanced Server
    u2022 Windows 2000 SP4 Datacenter Server
    u2022 Windows 2000 SP4 Server
    u2022 Windows Server 2003 Datacenter Edition
    u2022 Windows Server 2003 Enterprise Edition
    u2022 Windows Server 2003 Standard Edition
    u2022 Windows Server 2003 Web Edition
    u2022 Windows Server 2003 SP1 Datacenter Edition
    u2022 Windows Server 2003 SP1 Enterprise Edition
    u2022 Windows Server 2003 SP1 Standard Edition
    u2022 Windows Server 2003 SP1 Web Edition
    Server Products :
    u2022 Windows 2000 SP4 Advanced Server
    u2022 Windows 2000 SP4 Datacenter Server
    u2022 Windows 2000 SP4 Server
    u2022 Windows Server 2003 Datacenter Edition
    u2022 Windows Server 2003 Enterprise Edition
    u2022 Windows Server 2003 Standard Edition
    u2022 Windows Server 2003 Web Edition
    u2022 Windows Server 2003 SP1 Datacenter Edition
    u2022 Windows Server 2003 SP1 Enterprise Edition
    u2022 Windows Server 2003 SP1 Standard Edition
    u2022 Windows Server 2003 SP1 Web Edition
    Please revert in case of any further queries.
    Regards,
    Deepti Bajpai

  • Urgent help needed to setup Forms 6i Server on Windows Server 2003

    Hello,
    I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
    The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
    user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
    Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
    Any help is appreciated.
    Phil

    You it obtained to install the FORMS 6i SERVER in Windows 2003 ?
    I am with the same problem and not yet I obtained solution.

  • Error when configuring Siebel Server in Windows server 2003

    Hi
    I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
    2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
    GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
    GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

    Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
    Hope it helps,
    Wilson

  • I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

    I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

    In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
    The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
    I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
    I replaced line
    <exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
    with
    <exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
    This works.

  • Setup WEBLOGIC with Crystal Web Component/Reporting

    Does anyone know how to setup Crystal Web Component Server with WEBLOGIC?
    Thanks
    Graham
    Graham Smith
    PeopleSoft Technical Team Leader
    OXFAM GB
    +44 (1865) 313255
    [email protected]

    Hello Kenneth,
    as you refer to the legacy technology I recommend to post this query to the [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs; forum.
    This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, ASP, VCL, and Crystal Reports Print Engine (CRPE).
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Legacy Application Development SDKs queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • Problem instaliing sun one LDAP server on windows server 2008 r2

    Hi all ,
    I am trying to install Ldap server (Sun ONE Directory Server) on windows server 2008
    I am using apache-tomcat-7.0.28 and java jdk1.7.0_05
    I am following this manual for installing :
    https://blogs.oracle.com/marginNotes/entry/installing_directory_server_enterprise_edition1
    I have a problem with the cacao agent and how to install it .
    I've got this error message :
    c:\Program Files\Sun\dsee7\bin>dsccsetup cacao-reg
    Configuring Cacao...
    ## Failed to run "c:/Program Files/Sun/dsee7/ext/cacao_2/bin/cacaoadm.bat" set-
    aram "jdmk-home=c:/Program Files/Sun/dsee7/lib/private"
    #### Cannot create service for instance: [cacao.instance.name].
    #### Cannot perform firstime inialisation and configuration.
    ## Exit code is 1
    Failed to configure Cacao.
    I stuck and with no other solutions . I hope if you could to help with this issue .
    i will glad to know if there is any other ways to install this specific Ldap server ,
    Thanks,
    Alon

    You most likely skipped the step of starting the installed server prior to trying to access admin URL. Please check this document:
    http://docs.sun.com/source/817-1830-10/win.html
    Relevant section is:
    You can start the Administration Server in either of the following ways:
    # Select Start Menu -> Programs -> Sun ONE Web Server, and choose Start Web Server Administration Server.
    # From the Control Panel�s Services item.
    HTH...

  • How to start and stop sapmmc server when windows is started and shutdown

    Hi,
    May i know how i can make sure the sapmmc server for ECC 6.0 to start when the windows 2003 server is started. I know i need to add this as a service in the windows service manager but i dont know how to do that.
    Please advise me on how to add a service to start the sapmmc server when windows is started and how to stop the sapmmc server automatically when windows is shutdown.

    Hi Raja
    checkout this document m sure it will help you in configuration
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0512c790-0201-0010-72b7-886677ad7955
    also check
    /message/6511605#6511605 [original link is broken]
    All the best ,,
    Cheers
    dEE

  • How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS

    Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
    to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
    convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
    Server 2012.
    Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
    Any pointer would be appreciated.

    Hi,
    It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
    http://technet.microsoft.com/library/dn479239.aspx
    So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
    Hope this helps.
    Regards.
    Vivian Wang

  • Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

    Hello there-
    I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
    Is there any limitation on this sense? Any documentation about it?
    Thanks and appreciate your answers.
    Regards,
    Gustavo Ortega
    Software Engineer

    Hello,
    Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
    Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
    Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
    Roles needed in IIS 7.0/IIS 7.5.
    Common HTTP Features
    Static Content
    Default Document
    Directory Browsing
    HTTP Errors
    HTTP Redirection
    Application Development
    ISAPI Extensions
    ISAPI Filters
    Health and Diagnostics
    HTTP Logging
    Logging Tools
    Request Monitor
    Tracing
    Custom Logging
    ODBC Logging
    Security
    Basic Authentication
    Windows Authentication
    Request Filtering
    Note : Anonymous Authentication should be enabled.
    Performance
    Static content Compression
    Dynamic Content Compression
    Management Tools
    IIS Management Console
    IIS Management Scripts and Tools
    Management Service
    IIS 6 Management Compatibility
    IIS 6 Metabase compatibility
    IIS 6 WMI Compatibility
    IIS 6 Scripting Tools
    IIS 6 Management Console
    Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
    larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
    setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
    The following command can be used to set the parameter from the command prompt, please
    change the directory to Windows\System32\inetserv and then execute the command.
    appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
    The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
    after execution of this command.
    Also, are you using Maxdb to store the files or is it a "flat files" content server  ?
    HTH.
    Steve.

  • Backup Windows Server on Windows Server 2012

    We install backup windows server on windows server 2012 standard, more when I go in tools to be able to manage it he is not there, try the Wbadmin.msc command, and returns me a message that Windows can not find the Wbadmim.msc . Have uninstalled and reinstalled
    feature several times and still nothing.
    I am new to the forum, so descupem me if there is another topic like this.

    Hi There,
    Have you tried to search for "Administrative Tools" and run the "Windows Server Backup" from there?
    Good Luck

  • Installing Sun Directory Server on Windows Server 2008

    Has anyone tried installing Sun Java System Directory Server in Windows Server 2008? I am trying to do this but get an error stating that nss3.dll is missing at configuration time.

    Windows 2008 is not a supported platform for any DSEE release. Even if you get it working, Sun Support won't be able to help if you have issues.
    This issue seems to have been reported on Windows 2000 with DSEE 6.0 too and one workaround is to remove the nss3.dll from c:\winnt\system32 or equivalent directory. Please note this workaround is not targeted at Windows 2008, so use at your own risk.
    http://sunsolve.sun.com/search/document.do?assetkey=1-1-6680728-1
    Winodws Native DS6.0/ISW6.0 Zip:error could not locate nss3.dll
    Edited by: etst123 on Jan 29, 2009 10:39 AM
    (added link to bug report)

  • Problem In Data Base Creation... Oracle 10g server in windows server 2008

    I have installed Oracle 10g server in windows server 2008 and the domain & active directory r created now i am trying to create the databse i am getting usual error (tns protocol adapter error ) in the 2% i have removed the domain and the active directory from windows then i created but this is not a solutions i need to create the data base in the domain server...

    this is a forms forum.
    please post in Database Installation

  • I was trying to set Adobe Reader 11 as default PDF viewer on my client PCs, Please help me this. My server is windows 2012 R2 and client PCs are Windows 8.1

    I was trying to set Adobe Reader 11 as default PDF viewer on my client PCs, Please help me this. My server is windows 2012 R2 and client PCs are Windows 8.1

    Hi Krisis,
    I have found a forum where similar query was answered. Hope this helps.
    http://www.loginvsi.com/forum/support-v4/857-adobe-reader-xi-not-set-as-default-pdf-viewer -in-server-2012-r2-rds
    Regards,
    Anoop

  • Integrate On-Premises Exchange Server With Windows Server Essentials

    I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain.  Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
    locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network".  I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain.  Mail
    flow in and out of the Exchange Server works without issue.  I can use the various management tools to administer the Exchange Server.  The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
    to creating user mailboxes for user accounts setup in AD.
    All research to date has come up empty handed.
    Help!

    Hi RSUL,
    Any update?
    On current situation, would you please let me confirm something more? It may help me to understand this issue
    clearly.
    Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
    (type http://servername/connect)?
    On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
    Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
    wizard must be run on a domain controller.
    In addition, please refer to the following article and check if can help you.
    On
    Premises Exchange Integration Windows Server 2012 Essentials
    Integrate an On-Premises Exchange Server
    with Windows Server Essentials
    By the way, please check Event Viewer and some relevant logs if you can find some more clues.
    Hope this helps.
    Best regards,
    Justin Gu

Maybe you are looking for