Crystal Ent 10 install fails with Error 1920 and services won't start

apologies if i'm posting to the wrong group. just let me know what the appropriate group is and i'll be happy to post there. i'm new to Crystal and this is my first installation of Ent so i'm completely lost, but here's my problem.
i'm trying to install Crystal Reports 10 and Enterprise 10 on a Windows Server 2003 SP1 server logged in as Local Admin and running the install locally (as opposed from a network location). i have IIS installed and .Net Framework 2.0 installed as per my software vendor's requirements.
the Reports 10 install goes fine, but when i near the end of the Enterprise 10 install, each of the services fails to start. the message for each is a pop-up that states Error 1920. Service 'Crystal Cache Server' (CasheServer) fiailed to start. Verify that you have sufficient privileges to start the system services. i clicked Retry on the 1st one (Crystal Cache Server) but it still fails to start. so i clicked Ignore on all of them so i can get past each one and check the Services window to see what account they are running under - it's Local System account as i'd expect. At the end of the install, i'm asked if i want to logon to the CMS and i chose No since i'm not familiar with Crystal at all but figured it's not going to work since the services wouldn't start.
i can't start them from the Services window or from the Crystal Configuration Manager - i get a message stating it failed to start in a timely fashion.
my co-worker and i noticed that after the install, and the MSDE install that CE does, there are the CE10.mdf and CE10.ldf files but it doesn't create 4 tables that expect to see when comparing this to our Test environment that our consultants set up. we think this is at the heart of it, but we simply don't know. can anyone help?

The appropriate group for this type of question is the Business Objects Enterprise Administration forums; I will move your post there today, in the future you can post to that forum.

Similar Messages

DTM install fails with error 1935 on Windows 7

Trying to install DTM 600_b047 on a Windows 7 64-bit system. Install fails with
Error 1935 and HRESULT= 80073712. Have tried to run via Run As Administrator. It seems to get most of the way through before failing. (Without Run As Admin, it fails much earlier complaining about a cab file not found.)
Any ideas?

Hey adairlw,
Welcome to the BlackBerry Support Community Forums.
What security software is currently installed on the computer?
Also can I get you to re-name the install shield folder which is located under C:\Program files\common files. Once you re-name the folder, then try to install the software.
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application:     Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now                    Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
     Download failed
     There was an error downloading the update. Error #16820
     Close

Flash Player Install failed with error code: 30

Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks. I'm posting this so the engineers will know what to fix in the next update version.
I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark. The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
The FlashPlayerInstallManager.log says:
2014-04-13 16:12:01 -0500 [I] IM: ---------- log start ----------
2014-04-13 16:12:01 -0500 [I] IM: All install checks pass
2014-04-13 16:12:01 -0500 [W] IM: Unexpected umask value for process: 0
2014-04-13 16:12:06 -0500 [I] IM: User does not have any processes that need to be closed.
2014-04-13 16:12:06 -0500 [I] IM: [install started]
2014-04-13 16:12:06 -0500 [E] RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
    NSFileCreationDate = "2014-03-27 04:20:43 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileHFSCreatorCode = 0;
    NSFileHFSTypeCode = 0;
    NSFileModificationDate = "2014-03-27 04:20:43 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 2541;
    NSFileReferenceCount = 1;
    NSFileSize = 13348;
    NSFileSystemFileNumber = 4892044;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeRegular;
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
    NSFileCreationDate = "2014-04-07 13:43:21 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileModificationDate = "2014-04-13 21:12:06 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 449;
    NSFileReferenceCount = 12;
    NSFileSize = 408;
    NSFileSystemFileNumber = 4552991;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeDirectory;
2014-04-13 16:12:06 -0500 [E] IM: [install failed: 30]
2014-04-13 16:12:06 -0500 [E] IM: Install failed with error code: 30.
2014-04-13 16:12:06 -0500 [I] IM: ---------- log end ----------

I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
Using the offline installer completely eliminates the errors seen with the stub installer.

Flash Player Install Manager[681:16322] Install failed with error code: 30

OS 10.10, MBP 2011 i7, latest updates. I ran the installer by opening up the app package and invoking the install via terminal. at the 75% mark ( download finishes ) the installer fails. in the terminal I got this maybe helpful error message. any idea on getting flash to install ? its worse because I've run the uninstaller so parts of various websites don't work now
S

ok, its a permissions error because the installer isn't at the right run level, even asking for my admin password. if I do
sudo Install Adobe Flash Player.app
[enter password]
Installer now runs. it generates a bunch of error messages in the terminal
Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
Reason: image not found
——— does this about 10 times ending like this -------
2014-10-28 22:03:10.831 Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
Reason: image not found
2014-10-28 22:03:47.190 Adobe Flash Player Install Manager[764:19989] Install failed with error code: 17.
the install actually finishes though and flash is working… YAH ! but only a semi uber geek would ever figure this out or think to try it. please fix the installer as its got a problem under 10.10

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

Putting a row into a pageable cache failed with error 9 and error message

Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
Thanks

Hi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard

Crystal 10 Reports fail with error: "Load Report Failed"

Hi,
this seems to be a mystery. A client has Crystal 10 reports run from a Visual Studio 2003 application (.NET 1.1) running fine on and old server.
Once the .NET application is installed on a new Windows 2003 server, all Crystal 10 reports fail with the error message: "Load report failed" Source: CrystalDecisions.CrystalReport.Engine.
I set the worker process in the application pool to "system admin" and all Crystal reports failed. I had thought it was a security issue. I even removed Crystal 10 and installed Crystall XI Developer Edition and all reports raised the exact same error message from CrystalDecisions.CrystalReport.Engine.
Crystal does call the stored procedure to retrieve the data but cannot load the PDF. I have used 3 different physical servers, one Win 2003 64-bit and two Win 2003 32-bit and get the same error.
Help!
Thanks

Hi Mak,
It seems that you are having issue with SDK's.
Post your question in Business Objects SDK Application Development ->
.NET Development - Crystal Reports Forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK's queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Shweta

8.1.6 install fails with Error 1321 Installer has insufficient privileges -

Adobe Reader “Check for Updates” identifies “Adobe Reader 8.1.6 (CPSID_49167)” as “Available”.
Installation fails with “Error 1321.The Installer has insufficient privileges to modify the file C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Search.api.”
Reboot tries to complete install adding unwanted desktop icon, but CPSID_49167 still shows as “Available” and MSI29706>LOG(s) show above error.
XP SP3 Home, IE7, Adobe Reader 8.1.5

Thanx kashifMohd,
Downloaded the fix, vetted it, and before creating a new Administrator account used the following recipe with success:
1. Ran downloaded fix with usual Admin Account and got the “Error 1321 for Search.api.” as before, but now there is a pop-up asking "Retry" or "Cancel" that did not appear when using "Get Updates" function from running Adobe Reader. Replied "Cancel".
2. Rebooted, and disabled Kaspersky Anti-Virus.
3. Again ran downloaded fix with usual Admin Account and got Error 1321 for different file: "C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins3d\3difr.x3d" with pop-up asking "Retry" or "Cancel".
4. Clicked "Retry" this time and installation completed successfully.
Thanx again.

DTM install fails with error 1935

Installing DTM 6.0, downloaded from the web, for the first time on a Windows 7 (64-bit) Lenovo laptop consistently fails with error 1935 well into the install. Tried installing as Administrator, but that did not help.
Any ideas?
TIA

Hi adairlw,
this is a Windows error. Please check the below description. Most of the win 7 (x64) users reported this error with various application that they wanted to install.
Cause: Error 1935 takes place when the system is misconfigured or its essential files are missing. Such problems occur when a PC is not maintained properly and has accumulated many critical issues that require immediate repair.
Solution: Check http://www.restoreguard.com/p/download/go2.php for downloading a repair tool. I found this tool while searching internet.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Client install fails with Error 0x87d00280 on ccmsetup log file

CAS and Primary Server are on Server 2012 R2, Clients are Win 7 and Server 2008 R2 in
same Domain. Primary Server has DP and MP installed, I can successfully install client from my Primary Server through Client Push Installation. I don't see any errors on SCCM Console.
On the client side I can see C:\Windows\ccmsetup\ccmsetup.exe is installed and the "ccmsetup"
Service is not in running status.
When I checked the ccmsetup log file, the latest error message says - Have already tried all
MPs, Couldn't find DP locations. Also another line says - The Certificate Selection Criteria was not specified. There are no Certificates in "MY" store.
Do I need to install self signed Certificate through MMC snap-ins, DNS issue or I am missing
something, Please help!
Angur J Patel

is your MP set to https ? seems like its certificates issue. You can go through the documentation
https://technet.microsoft.com/en-us/library/gg682023.aspx? on how to setup PKI in sccm 2012 to check if you have created certificates as needed .
this might help you http://jackstromberg.com/2014/09/system-center-2012-r2-configuration-manager-ccmsetup-failed-with-error-code-0x87d00280/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr

TimesTen 7.0.6.9: Replication Agent fails with Error 17029 and 8191

The replication agent failed to start with error 17029 and 8191.
/etc/hosts look like:
1.1.1.1 server1.tt.com server1 => `hostname` returns this
2.2.2.2 server1-2.tt.com server1-2
SQL statement to create a replication schema looks like:
CREATE REPLICATION AAA.R1
MASTER dsn1 on server1-2
SUBSCRIBER dsn2 on server2
STORE dsn1 on "server1-2" PORT 17013
STORE dsn2 on "server2" PORT 17013;
call ttRepStart();
call ttRamPolicySet('always');
call ttRepPolicySet('always');
quit
This fails with
17029: This store (dsn1 on server1.tt.com) is not involved as a local store in replication scheme AAA.R1
8191: This store (dsn1 on server1.tt.com) is not involved in a replication scheme
In addition, replication files are created with dsn1 as a prefix.
I added ttHostNameSet('server1-2'); before ttRepStart(), but it did not seem to take effect. I also tried ROUTE statement; however, the error did not disappear.
How can I make this work?

Yes you have to specify the hostname output in the replication DDL.
This is what you can find in the replication Doc
"When specifying the host for a data store in a replication element, you should always use the name returned by the hostname command, as replication uses the this same host name to verify that the current host is involved in the replication scheme. Replication schemes may not be created that do not include the current host.
If a host contains multiple network interfaces (with different IP addresses), you should specify which interfaces are to be used by replication using the ROUTE clause. You must specify a priority for each interface. Replication tries to first connect using the address with the highest priority."

Error 1069 - Server Service won't start

I'm getting the following erro message when I try to start Central Pro Server:
Could not start the Adobe Central Output Server Service on local computer.
Error 1069 The Service did not start due to logon failure.
I checked the services and it won't allow me to start this manually... any suggestions would be greatly appreciated!

From the text error as well as the inability to manually start the server I'd suspect that the user-id or password defined on the Log On tab is incorrect. If you are on a Windows network don't forget that if you are using a Domain user-id that the domain name has to be included (DOMAIN\user-id).

Adobe Acrobat XI Standard 11.0.10 silent install failing with error 1603

Hello
I just updated my AIPs for Adobe Acrobat Pro 11 Pro and Standard. The Pro silent install is working fine. But I cannot get the Standard install to run on Windows 7 or WIndows 8. I have gone over every detail that I can think of or find on forums.
I use the Adobe Customization Wizard XI and choose the basic stuff to create my transform. I don't generally enter a serial number in the customization setup but I tried that and the installation did appear to complete successfully. But when I tried to open Acrobat it did not work. Processes like PDapp.exe where running in a loop but never stopped. Without a serial I get the errors below and the install fails almost immediately. I have recreated the API and transform a few times hoping it would help.
Installing with the following line msiexec /i "%~dp0AcroStan.msi" TRANSFORMS=AcroStan.mst /qb /L*v c:\acrobat.log I get an error message that just says "error".
Application Event logs
Product: Adobe Acrobat XI Standard -- error.
Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.10. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1603.
When I run the AcroStan.msi by itself the installation completes successfully so it would appear the issue is in customization process or the .mst file. Any help would be greatly appreciated.
Thank you

I'm assuming that verbose logging is accomplished by adding /L*v c:\acrobat.log ? No, I do not have CustomAction AAMIU_Install.196A45B3_0387_4DF9_9420 in my log file. The only items referencing 1603 are below.
CustomAction CheckForPendingOperation returned actual error code 1603 but will be translated to success due to continue marking
CustomAction SetLotusNotesInstalled returned actual error code 1603 but will be translated to success due to continue marking
CustomAction ProcessAbcpy returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (84:C4) [15:30:14:422]: Note: 1: 1708
MSI (s) (84:C4) [15:30:14:422]: Product: Adobe Acrobat XI Standard -- Installation operation failed.
MSI (s) (84:C4) [15:30:14:422]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.10. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1603.
MSI (s) (84:C4) [15:30:14:458]: Attempting to delete file C:\windows\Installer\9d9a98.mst
MSI (s) (84:C4) [15:30:14:478]: Deferring clean up of packages/files, if any exist
MSI (s) (84:C4) [15:30:14:478]: Attempting to delete file C:\windows\Installer\9d9a98.mst
MSI (s) (84:C4) [15:30:14:478]: Unable to delete the file outside of the engine. LastError = 2
MSI (s) (84:C4) [15:30:14:479]: MainEngineThread is returning 1603
MSI (s) (84:28) [15:30:14:480]: Calling SRSetRestorePoint API. dwRestorePtType: 13, dwEventType: 103, llSequenceNumber: 31, szDescription: "".
MSI (s) (84:28) [15:30:14:483]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
=== Logging stopped: 1/16/2015 15:30:14 ===
MSI (s) (84:28) [15:30:14:484]: User policy value 'DisableRollback' is 0
MSI (s) (84:28) [15:30:14:485]: Machine policy value 'DisableRollback' is 0
MSI (s) (84:28) [15:30:14:485]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (84:28) [15:30:14:485]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (84:28) [15:30:14:485]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (84:28) [15:30:14:486]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (84:28) [15:30:14:487]: Destroying RemoteAPI object.
MSI (s) (84:54) [15:30:14:487]: Custom Action Manager thread ending.
MSI (c) (E4:0C) [15:30:14:489]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E4:0C) [15:30:14:489]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/16/2015 15:30:14 ===

Cisco VPN client install fails with Error 1722 on Windows 7

Hi,
I am having issues with laptops upgraded from Vista to Windows 7.
Prior to the upgrade they are running Cisco VPN Client 5.0.05.0290. These laptops also have Juniper Network Connect 6.5 and Citrix web client installed. The windows upgrade advisor made no recommendations regarding uninstalling / reinstalling these apps.
I have done an inplace upgade to Windows 7 (Windows Vista Enterprise 32bit to Windows 7 Enterprise 32 bit) and after the install the Cisco client is not working. Uninstalled the client (the uninstall was successful) then reinstalled and the installation fails at Installing Cisco Systems Virtual Adapter - error 1722 there was a problem with the windows installer package.
I have followed the steps for a manual uninstall of the Cisco client and then tried the install again - still not successful. Interestingly (or not) the Juniper Network Connect also fails with the error The Network Connect Virtual adapter driver is not installed properly. This also fails to reinstall after being removed.
I tried removing the VPN clients on another laptop and then running the upgrade but the same errors occured when reinstalling the VPN Client. I have tried the Winfix and DNE patch from Citrix but these fail saying there is a corruption in the application.
On another laptop where only the Cisco VPN client was installed a reinstall was required after the upgrade, but it did install successfully.
On a clean image these applications all install fine, however I have a large number of laptops do upgrade and don't want to do a fresh install and settings migration on all of them.
What files / registry entrys are involved with the DNE adapter so I can manually clear it all out before reinstalling?
Anything else I can do to troubleshoot this issue?
Cheers,
James

You should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi
(Using Shrew VPN is a possible workaround.)

Crystal Ent 10 install fails with Error 1920 and services won't start

Similar Messages

Maybe you are looking for