Crystal - Excel (multi tab)

Hi
I know this has been asked several times and I know everyone says there's no way to do this. Can someone say something else lol.
I just started at a new company and they asked me to check this out. I did download Visual Cut and it works but only on Level 1 group.
I did also find out that if a Crystal Report goes over 65k lines then it will go onto a new tab.
So is there anyway to add empty rows at the end of a section to fill up the 65k limit? Because that might just work.
I'm downloading CR 2011 and hope there's something new in there that can help me out but don't know yet.
Thanks

@Abhilash - I'm not worried about the 65k limit. I would actually like to have blank fields filling to space so my report can go to the next sheet.
@Ido - Your tool rocks but the reports I'm looking at is 1 report with +- 6 sub-reports so there's not any grouping. The sub-reports are all in the footer sections.
Each of those sub reports has to go into their own sheet. I know you said something about creating each sub-report as their own report.
I would then assume I should use your tool to export each report (which was converted from the sub-report) into an excel document and add the tag to update the document. Am I correct?
Problem with this is that the report is currently running from our system so we can't use your tool as well. The clients would like to run it and export it and that's it. No addition effort has to be used for this.
ps: Tested Crystal 2011 and the export is the same except that it supports xlsx files.

Similar Messages

Can we create Multi Tabbed excel Sheet using Crystal Reports 2008

Hi,
We want to create a Crystal Report which will export the output as multiple Tab's ( we can use sub reports). Can we create a Multi Tabbed excel Sheet using Crystal Reports 2008 ( not Crystal reports Basic 2008). Please share any information/links on how to do that.
Also if it is not supported please let us know which version supports it.
Thanks,
Vasu

At least one of the 3rd-party Crystal Reports Desktop Scheduling tools listed at: http://www.kenhamady.com/bookmarks.html provides that functionality. It allows you to burst a single report so that each Group at level 1 becomes a separate tab. You can control the tab names (and tab colors) via fields/formulas inside the report.
You can also automate the process of exporting to (and also replacing or appending to) specified tabs inside existing workbooks.

Export to Multi-tabbed Excel File

Hi,
I'm using Crystal Reports XI R1 and aside from designing reports in WEBi, do newer versions of Crystal support exporting reports to multi-tabbed Excel files?
Thanks,
Brian

Hi Brian,
Moving your post to Businessobjects WEBI forum. They can answer your question quicker.
Thank you
Don

How do I open a multi-tab excel document in numbers?

New mac for Christmas!
I am reluctant to instal MS Office and am willing to try out Apples programs. Only major issue is I cannot open my multi-tab workbooks that I created in Excel. I use them daily. Is there anyway to open them? Does the Numbers program have tabs si

What have you tried? I generally drop the excel file on the Numbers icon in the doc.
If you want the files to remain excel files you should get excel. If you are ok transitioning to Numbers give it a try. Numbers will export to excel once a file is open but does NOT natively save excel files.
You can also try OpenOffice or LibreOffice for free.

Multi-Tab Excel worksheet

Is it possible to create a multi-tabbed worksheet in CF 8? I can do a single tab using cfcontent, haven't found anything on adding additional tabs

CFCONTENT has nothing to do with generating excel sheets.You're just defining that output data is sent in binary form, with a certain mime type. Creating an Excel sheet is something completely separated. If you use already a third party component for this, check if it supports multiple worksheets.
A csv file is not an Excel worksheet (conceptually) at all. There are no features like sheets. It's dummy data with just commas, quotes, values and linefeeds.
One alternative would be to create an Excel XML worksheet. I haven't tried thismyself, but here are some pointers:
http://msdn.microsoft.com/en-us/library/aa140066%28office.10%29.aspx
http://prsync.com/oracle/multisheet-excel-output-18866/
CF9 is of course the easiest solution with its cfspreadsheet tag, if you can upgrade.
- Fernis - fernis.net - ColdFusion Developer For Hire

XML Publisher Multi tab Report: Help needed

Hi,
I have a requirement like below--
Need to develop master detail XML Report in R12. O/P will be in excel.
Excel output having two Work sheet.
Some columns data must be non editable in excel output ,whereas some columns will be editable.
User must not be able to add any line manually in the report.
Can anyone pls help me out to find a way to build this?????????
Thanks
Titas

Hi Titas,
Any luck with this? Were you able to create a multi-tab report using XML Publisher? Any help on this will be greatly appreciated.
Thanks.

Supressing tabs in multi tab report

I have a multi tab report that all the tabs are based off different queries. I want to suppress individual tabs and not have them export in Excel if the query returns no records.

Hi,
We can do this manually by selecting required report tabs (copy) and saving them in excel or to automate this process should work on SDK.
Cheers,
Suresh Aluri.

Independent canvases into a multi-tab component

Hi!
I built eight individual dashboards which I now would like to assemble in one, maybe two multi-dashboards tab components. I realize I could export the excel page of each one but I would still have to build the dashboards one by one into the tab component multi-dashboard. Is there any way to directly copy the dashboards and "paste" them into the multi-tab component?
Thank you kindly!

Gunderic,
There is one more option to get this...
Export the 1st dashboard to swf.
In the new dashboard, use the image component and import the swf file into the tab.
Hope this helps...
-Anil

How to upload the data from excel(3 tabs) file to sap environment

Hi all,
This is Mahesh.
how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.

Hi,
The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
You can find a solution for 2 worksheets in this post :
TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
I think you can easily modify it to handle any number of worksheets.
Hope it helps !
Best regards,
Guillaume

Query Name in Excel Sheet tab

Hi Friends,
Instead of display Sheet 1 in the Excel sheet tab(Bex), is there a way we can display Query Name in the excel sheet tab? please let me know.
Thanks,
KK

Hi Kumar
Can you please share how it was solved ?
Ashish

How to design crystal report multi column

how to design crystal report multi column
for example
id    1001             id                 1002
    id            1003
name    dinesh          name            dk           name
dkn
address   kota             address       jaipur             address     delhi
pin    3260356        pin              546332        pin
675942
id    1004           id                 1005
   id            1006
name    dinesh1       name            dk1           name
dkn
address   kota1           address       jaipur1           address     delhi
pin    32606       pin            546345              pin
675942
and so on....................

DN
I am afraid you have come to the wrong place. MS does not support Crystal reports except for
"Microsoft supports setup and installation for the Crystal Reports products shipped with the Professional and Enterprise Editions of Microsoft Visual Basic for Windows versions 3.0, 4.0, 5.0 and 6.0."
For other support you need to contact
For other Crystal Reports support, please do not contact Microsoft. Please contact Crystal Decisions (formerly Seagate Software), which now owns and supports Crystal Report Writer.
http://support.microsoft.com/kb/100368
Wanikiya and Dyami--Team Zigzag

[Agentry] Identifying the selected object in multi-tab lists on iPad

hi all,
On iPad, we can create a multi-tab lists to group objects based on different criteria as shown below.
In my implementation, I created a Tile Display which holds a screen set called “Lists” with multiple list screens.
Once we select an object in one of the lists, we need to either display details of the it or execute some transactions on that object. Then I had difficulty to find a way to identify the selected object. Since this is a screen set inside a tile display. I first tried to see if I can drill down on the tile display.
As shown above, I cannot go further on the tile display.
Then I tried to see if I can find the object on the “Lists” screen set. There are four screens each of which has “selected object” option. During the application’s execution, the user may switch between lists/tabs. Is there any method we can figure out which tab/screen the user is currently on? With that piece of information, I can identify the screen and then the object accordingly.
My development environment is 6.0.42 and iOS 7.1.
If this is not correct way to accomplish such function, is there any work around available to present a workable multi-lists tile on iPad?
Thanks a lot.
-Yang

Jason,
My following question might be a bit off the original topic. Please let me know if you want me to open a new post.
I actually tried the navigation as well as the list selection. The navigation did happen. However, instead of presenting the Lists screen in the original tile display, a new full screen is created after the navigation which covers the original screen on iPad.
This leads to a general question regarding the navigation on screen with tile display. For pocket PC, the navigation is straight forward as a new screen is going to be created to cover the original screen. On tablet, if tile display is used, is it possible to navigate to, i.e., activate the focus on, a particular screen inside a tile display?
Please let me know if I make my question clear.
Thanks a lot.
-Yang

How to update hidden item after submit of multi tab form

Hi everyone,
I have a multi tab form which is being used to insert records into a table. One of the columns I have included in the form source is 'hidden' and i want this item to be populated with the current date and time for each row, when I press the submit button. I have tried to achieve this by creating a PL/SQL process on the Page with the following details:
Process point: 'On Submit - After Computations and Validations'.
Source: :P5_DATE_ENTERED := :SYSDATE_YYYYMMDD;
However, when I test the Page I get the following error on pressing Submit:
'Error ERR-1002 unable to find ID for item P5_DATE_ENTERED...'
So, I'd be very grateful if anyone can advise me as to how to achieve this basic functionality,
cheers,
Kevin.

Hi,
Thanks for the reply, I had considered that and I think that probably is the best approach. However, I'd like to know why my method of trying to do it in APEX doesn't work as it seems such a simple thing to want to do,
regards,
Kevin.

The multi-tabs is not working all the time. Windows7 Firefox 4.0.1 I have the correct opetions set for multi-tabs.

The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.

Right click a tab and you will get the option to bookmark all tabs. Or use keyboard '''Alt + B''' which opens the old style menu. You can make changes to Firefox, as explained in this post: [/questions/799856#answer-155765]

SubVI with while loop + event structure not working in multi tab VI

Hello Everyone,
I am developing an interface for the control of a prober using Labview 2012, and I am stuck with some issue.
To start with I provide you with a simplified version of my control interface VI, and with the sub-VI used to build and manage the wafer maps.
The VI consists of several tabs: Prober Initialization, Wafer Handling, Wafer Map, Status, Error.
The sub-VI can:
1/ initialize the grid to display the map (sub VI Init Grid not provided here)
2/ import XY coordinates from a txt file (sub VI Wafer Map Import)
3/ display the coordinates and index of the die below the cursor
4/ and when a die position is double clicked, and the boolean "Edit Wafer Map" is true, then the user can change the state (color) of the die between On-wafer die and Selected Die
My issue:
If I use the sub-VI by itself, it works fine. However when I use it as a sub-VI in the tab "Wafer Map", the map does not build up and I can no further use the embedded functionalities in the sub-VI.
I suspect the while loop + event structure of the sub-VI to be the bottleneck here.
However I don't know which way to go, that's why I'd be glad to have some advice and help here.
Thank you.
Florian
Solved!
Go to Solution.
Attachments:
Control Interface.zip ‏61 KB

Hi NitzZ,
Thank you for your reply.
I tried to save the VIs in LV10, please tell me if you can open them now.
Inside he event structure there is quite some code, and since I don't want to make the main vi too bulky, I would like to keep it as a sub-VI.
As you can see from the sub-VI, the event structure is used for extracting cursor position and tracking the double click action. These events are linked, through a property node, to the image "Wafer Map" which is passed to the main vi through connector pane.
All values are passed this way as well (through connector pane). Is there another way?
Maybe "refnum", but I don't really understand how to use them...
If I use the event structure in the main vi, the wafer map is still not working. I tried it earlier.
To implement the multi tab front panel, I used a tab control, and a for loop + case structure. For each element of the case structure, there is a corresponding action.
For the case where I put the code (element=2) for Wafer Map, I also control the execution of the code with a case structure activated by the button "REFRESH". Otherwise I end up with a freezing of the panel right after the start.
I hope these comments help you understand better.
Regards,
Florian
Attachments:
Control Interface.zip ‏104 KB

Crystal - Excel (multi tab)

Similar Messages

Maybe you are looking for