Crystal HTML viewer will not show embedded image from Infoview image store

I am having an issue with the html and dhtml viewers not showing an image I have embedded inside a crystal report. The image has been stored in infoview and embedded into the report from that source. Using the Crystal ActiveX viewer works fine in this case and shows the image. The html viewers however show the blank box with the red X in the top left corner when Internet explorer can't find an image.
Now, if I right click on the image and get it's properties I get this URL:
http://vsx2af0x/crystalreportviewers115/imagehandlerdotnetbridge.aspx?dynamicimage={B8FDE586-08D3-4A14-896C-0FE19AC3DB90}.png
If I take that url and try to load it directly through Internet explorer I get the following error:
Exception of type 'System.OutOfMemoryException' was thrown.
The file is small and only about 20k in size. If someone can help that would be greatly appreciated.
Thanks

Unfortunately I have been unable to remove the plug-in. The files is not locked, or shared, but my operating systems thinks it is.
What happens, when you try?
When I try to delete the plug-in from
/Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/
with ⌘⌫, I simply get the pop-up panel to enter my administrator password, and the plug-in will be moved to the Trash:
Don't forget to quit Aperture, before trying to remove the plug-in and to log off and on.

Similar Messages

My macbook will not download any apps from the app store. I don't know how to fix it, help?

My macbook will not download any apps from the app store. im running on mac os x 10.6.8. I don't know how to fix it, help?

Install the Mac OS X 10.6.8 Update Combo
That will re download and install the App Store for you which may help.
It's ok to install the combo even though you are already running v10.6.8
Restart your Mac after combo is installed, try downloading apps.
Note... if you have Little Snitch installed that will prevent downloads. If you have anti virus software installed, disable that and turn off the Firewall in System Prefereces > Security.

Crystal XI viewer will not open in Internet Explorer

I have a web site using ASP and we are using Crystal XI as our report program. We developers have created the .msi file that is distributed to our QA and Production Servers so that all users can run reports and see them in Crystal Viewer using IE using any PC.
The problem is that only we developers can see the viewer in IE. Any client that runs the reports on a virgin machine (no Crystal loaded) only gets an IE window with a red "x" in the upper left hand corner.
Does any one know why the viewer will not display?
The .msi file I created holds these fiels:
CrystalReports11_5_RDC_Licence.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_ReportEngin.msm
Microsoft_VC80_ALT_x86.msm
Microsoft_VC80_CRT_x86.msm
Plus a dll that is custom to us.
Can anyone tell me what I'm missing? As I said it works just fine (the viewer is show in IE) on any machine that has had Crystal Reports loaded prior to the run.

Intermittent rights issues when trying to auto-deploy ActiveX controls on a machine is very onerous to resolve.
Because of security concerns, typical corporate machines prohibit users from auto-downloading and installing ActiveX controls.
When the ActiveX control is required on a machine that's locked down, the ActiveXViewer.cab file must be physically copied to the machine, and a user with administrator (preferrably local admin) rights must manually install the CRViewer.inf found in the cab file.
CR.NET and Java Reporting Component has a HTML-based zero-client viewer, that do not encounter issues with ActiveX (unless the ActiveX print control need to be used for client-side printing).
Sincerely,
Ted Ueda

I purchased my macbook pro with Lion pre-installed. However its not showing as "installed" from the app store. How can I re-install?

As the title says, I just bought my macbook pro. I'd like to reinstall Lion. However its not showing as "installed" in my app store? So How can I reinstall it?

No. Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
diskutil list
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

Crystal report viewer do not show on client computer installation

hi
hope all you are fine
i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
1. CRRuntime_13_0_tr.msm 2. Microsoft_VC100_ATL_x86.msm
3. Microsoft_VC100_CRT_x86.msm
4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show.
Please Help

Hello,
For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal reports viewer will not prompt for parameters

Help,
I can not get crystal report viewer to prompt for parameters when called from IIS 8 on Server 2012 r2
I can get crystal report viewer to prompt for parameters when run from vs 2010 built in web service.

Thanks,
The solution for me was to uninstall the latest crystal reports runtime 13.10.x and install 13.6.x instead.
Thanks anyway.

Robo HTML 9 will not open our project from Source Control after initial start.

We have a project in version control that we have been using forever, since 2003 or so and many versions of RH. Now that we have upgraded to 9, this project will open the first time in version control and work normally. Once you close the project and attempt to reopen from the starter screen, it opens just great, just not in version control. The files are still set to read only. I have done this several times and the only way i can work on my project in version control is to act like i am opening a project from scratch, then it needs to overwrite all of my local files with the server files. It would not be so bad but I am 3000 miles away from the server and 13 hops plus a slow firewall on the other end. While this has never been a problem in the past it is a big problem because it takes hours for all the files to download and overwrite my local files.
This only happens with RH9 and Version Control 3.1. RH8 works no problem. So, I don't know if this is a RH9 starter problem or a Source Control Problem. Maybe I will make a similar thread in the RH area. I'll wait to see if I get any useful hits from this one first.
It is very strange, I had RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so the heat is less right now but today, it opened with no source control. If I go to Source Control the only thing i can select is put project in source control. That is how it got into source control after converting to RH9.
We have another project that seems to open from version control normally but we can only save topics in HTML view. No useful answers to that topic after a week.
Got any ideas???
I have tried different folder names, different paths, etc.
Thanks,
dv

Ok, here is a wierd one, I used the add to version control icon in the menu bar, It already knew the path so I figured I'm the only one who has been editing these files for the past few days so I clicked add to version control. It added it. I closed and reopeded and still had the same files checked out. Closed, checked in all, then reopened and it is working in SourceControl. Strange that after opening from source control and closing that you need to reopen and tell it to put the project into source control. Obviously some flag is not getting set somewhere. This might help others having problems reopening source control files.
dv

"Save As" will not show Airport Extreme from Safari with Yosemite.

macbook air mod-2011
Yosemite 10.10.1
After upgrading to Yosemite, using save as from safari will not list Airport Extreme as a share drive for use. It worked fine before Yosemite.
Accessing finder window direct usually has AE, but it gets lost and I have to cycle wireless off/on.
Please help.

Clearing the keychain has seemed to work, sorta. I have begun to understand the symptoms better. The Safari "save as" is a specific part of the symptom. If the MA (Mac Air) has been unattended over night or for hours, the readiness of the connection to the TC drive is lost. If finder is opened and the TC is clicked under the shared tab, then it takes 20-40 seconds to recognize the connection and have the "data" folder show itself. Once that happens, simultaneously, the safari list of available drives for saving populates and shows ready access to the TC. It seems that there is some background connection maintenance process to keep access current with the TC that is corrupted or problematic with Yosemite. I guess the latter since I am not the only one with this issue.
I think the Safari symptom would disappear if the connection was maintained with the shared TC drive.
Nice talking to me . . . . later.

Two devices synced, but firefox will not show most tabs from other devices.

I have had my laptop and my PC synced forever. Up until a week ago when I clicked "tabs from other devices" it would show me all of my tabs from the other computer, and if I closed one or opened a new one it would show up in the list almost instantly. Now all of a sudden when I click show tabs from other devices it will only show one or two of the tabs I have open on the other computer and ignore all the rest. No matter what I do I can only get it to show like google and facebook. Everything is still synced properly, bookmarks and all that jazz work fine. It's just the show tabs from other devices that isn't working, and that's the only feature I care about. If your suggestion is to make a new sync profile, don't bother responding, as that is not the problem or the solution.

Hi tdkevin,
This is strange you were not asked to try the new sync. As the old sync has the tab sync feature, but the new one has a new place for them. In order to move to the new sync you have to remove all the devices from the old sync and then it will allow you to set up the new one.
In Firefox for Android
In the new one in a new tab, tap on History, then on the bottom there are two icons: a clock and one with 4 grey squares. Tap that one and look at the recently synced tabs.
In Firefox for Desktop
if you have not set up the new sync the Tabs will sync every interval of time set by default in the about:config page. (search for sync interval I think). In the new one the about:accounts page will have a manage button that will take you to the preferences of sync. There you can check the Tabs tick.
I hope this clears up the differences between the old and new. The original question though was why some tabs were syncing and others not. I do not know, we can look at about:sync-logs if you have any errors in those log files. This may help lead to some more info.

Know how to resolve when the ipad will not download a movie from the ITunes Store?

my ipad will not completely download rented movies. It shows that it is "Purchased" but never completes the download so the movie cannot be watched in its entirety.

I suspect you don't have enough Available storage space. Check at Settings>General>About>Available
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
What is Stored in iCloud and What is Not
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
 Cheers, Tom

Visio viewer will not open embedded .vsd file in word 2007

I am trying to open a .vsd file that is embedded in a word 2007 document. The user who embedded it had Visio 2007 and i only have visio viewer 2010 sp2 and IE 9. When clicking on the .vsd to open it i recieve an error that states:
The server application, source file, or item cannot be found. Make sure the application is properly installed, and that it has not been deleted, moved, renamed, or blocked by policy.
There is a user that can open the embedded file but they have Visio application as well as Visio viewer. It opens in Visio Application on that persons machine. The icon in word shows the Visio applications image. Does the embedded document have some sort
of defaulted program associated with it, ie (Visio 2007)? Or should this document be able to be opened with visio viewer?

Was anyone able to solve this?
I encounter the exact same problem, visio viewer 2013 + IE11 cannot open Visio files which are embedded in a word document, although it is possible to open regular visio files which are not embedded,
I know it is possible to extract the visio files from the word document (by renaming the .docx extension to .zip and copy the file from the word\embeddings folder), but I would like to know if there is a fix for this behaviour so it will be possible to open
visio files embedded in word document directly from the Word document using Visio viewer?
thanks

Raw and jpeg will not show when imported from camera

I am doing a OCA degree in digital photography using aperture 3 . I have been asked to take Raw and J pag , open up in the program I use. And not the differance and the make changes.
I have 1d MK III and 7 d I cannot get both file types to show side by side.. Some one tell me how to do this please. I must have clicked , ticked something , that I cannot find to put right again.

As always, start by copying the images on to a folder on the hard drive and then backing up the folder. Never import directly from camera or card into Aperture or any other images app.
Then since this is an exercise not a batch workflow, simply rename the RAW and JPEG versions of one image and separately import each renamed version into Aperture. The two should each be Masters, one from the JPEG original and one from the RAW original.
Note the JPEG may initially "look" better on the (relatively low resolution) display due to in-camera presets like sharpening, etc. not present in the RAW file. However the RAW file contains much more image data, is much more editable and is capable of making superior (relatively very high resolution) hard copy prints.
HTH
-Allen Wicks

Imovie will not show new photos from iphoto?

The imovie project I'm working on needs several photos that I recently downloaded. However when going into the photo section of imovie these new photos do not appear in the album that they have been placed in.
Is there anyway to get them to appear?
Any help would be appreciated!

limey1
Welcome to the Apple Discussions.
It's a while since i used v5 but I think this is true.
Whereas with early version of iPhoto there was a separate folder for each album, starting at v5 the app doesn;t do that. Instead the album information is stored as part of the main database file. At heart, it's a direction to the app to display certain pics together. The advantage being that a single pics can be many, many albums with no wasted disk space.
Regards
TD

New Hyper-V machine will not install guest OS from ISO image. Your PC ran into a problem.....

Thanks for any help in advance....
Here's the scenario. I have a new Dell PE R630. 2012 Standard R2, fresh install. All drivers and updates are installed. When booting a newly created VM from an ISO of 2012 R2 Standard, attempting to install the OS on the VM,
I get the blue screen of "Your PC has run into a problem" screen. It just loops over and over again.
I've tried Generation 1 VM and Generation 2 VM. I've disabled Secure Boot in "Bios" on the Generation 2 VM. I've tried different ISO files. I've tried disabling all integration services. I've tried just about every single
settings change there is to try with the same result.
In the Bios of the hardware R630, I checked that Virtualization is enabled. I looked for any other settings that could be off, but don't see anything out of the ordinary.
I don't know what else to try. Thanks to anyone with input.
-Josh

Hi Sir,
I would suggest you to :
1. check if there is any power saving mode was enabled on R630 BIOS .
2. check hyper-v host "Power Options" selected "High performance" .
3. please try to disable " NUMA spanning " in hyper-v settings .
Then install OS for VM again .
In addition , please check hyper-v host's event log to see if there's any error recorded :
"event viewer / applications and services logs / microsoft /windows / hyper-v* "
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

TS3219 My iPad will not connect to iTunes or the app store

Help I can't connect my iPad to the App Store or iTunes .I could connect before but now nothing

"iPad will not connect to iTunes from the app store?"
marenfromphoenix wrote:
Have turned off and back on, still won't connect. Help, anyone?
iTunes and the App Store are two different apps/stores. I'm not sure I understand what you are trying to do. If you want to buy apps - go to the app store. If you want to but media - music, movies, TV shows - go to iTunes.

Crystal HTML viewer will not show embedded image from Infoview image store

Similar Messages

Maybe you are looking for