Crystal installation and 3.1

When I install Crystal reports 2008 on a node with BOE XI 3.1 component (either the platform of simply live-office), execution of crystal reports fails with the message:
The procedure entry point ?PrintLegend@ ...could not be located in the dynamic link library cslibu-3-0.dll.
This is regardless of the order in which I install the various components.

Hi Nareen
I install crystal reports 2008 + service pack 1.
I then proceed to install live office (if on a client).
If on a server, I install BOE 3.1. The steps taken here is :
Entering the license key
selecting database (SQL Server or MySQL)
I select tomcat as application server
/Thomas

Similar Messages

Crystal Reports and Xcelsius Installation

Hi I have a mac book pro and wanted to learn crystal reports and xcelsius in a hands on way. I have created a partition on the laptop and am wondering which OS to install - Windows(if so which one) or Linux. Immediate goal is have an environment where I can use CR and Xcelsius with a non sap data source. My end goal eventually is to have an environment where I can use Crystal report and xcelsius with SAP ECC6.
I am trying to learn CR, Xcelsius with SAP ECC and SAP BW. Your ideas and isights are welcome.
Thanks

Hi Otto,
Thanks for the link. Your link will be a good start for me in terms of finding out the major components required to accomplish this 'project'. I am definitely interesting in collaborating and discussing the findings and exploring the areas of opportunity, so lets stayi in touch.
I dont have access to any windows os right now. So I am thinking about installing linux on my mac book pro since its free and probably going to beef up the ram to 3 gb (per my understanding max supported on my 2007 model). Hopefully this will get me going in the right direction.
Any recommendations on Suse vs Red hat. looking for something that is free.
Thanks

Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

Hi,
I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to Broadcast from Crystal reports?
I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
What is best option for email/broadcasting for Crystal Reports?
Your help is appreciated.
Thanks.
SVK.

Hi,
I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
Ingo

Crystal reports and adobe workflows server

Hi,
Is there a way to integrate crystal reports and adobe workflow server
Regards
Raja

I believe AWS 6.2 supports Crystal Rpt 8.5, but don't hold be to it.
The AWS appl. does come with prebuilt reports incl. You should check the documentation concerning installation, but I believe AWS requires the Crystal Engine to be installed on the same server as the AWS Web Access component.

Crystal Report and Log4net error 1.2.10

Hi at all,
I have problem on Crystal Report and log4net.
It happens when I deploy the Web applications on the server.
I'm using Visual studio 2013 update 2, and I'm using log4net 2.0.3 (1.2.13) and I'm using CRforVS2013_13_0_10, the last.
When I deploy my application on the target machine, where I have also installed the runtime 64 bit for Crystal Report, I found this error:
ERROR 2014-07-31 16:26:42,721 1528053ms 8Euro                  - IP:192.168.0.38    - HOST:192.168.0.38 DumpWebRequest                           - ERROR: Exception of type 'System.Web.HttpUnhandledException' was thrown.
Exception StackTrace:   at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ERROR: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
ERROR: Could not load file or assembly 'log4net, Version=1.2.13.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Exception StackTrace:   at CrystalDecisions.Shared.SharedUtils..cctor()
ERROR: Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Not able to extract code, error:Value cannot be null.
Parameter name: source
Exception StackTrace:
On my local Visual studio it works, works fine.
But when I'm deploying on Server, 2008 win 64 bit, I found this error.
I've tried everything, I've installed also the runtime 64 bit on the target/server machine.
The problem is that the log4net is not registered in the windows\assembly directory on the target server ? Do I have to use the Gac util to register the log4net dll assembly ?
Please help me, It one day that I'm facing this error, but I'm not able to solve.
Regards
Vittorio

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Installation and performance wonderful!

Just completed installation and testing of Aperture 3. 20K images, mostly RAW from Canon 40D and 5DM2 (11 to 23 MB RAW files), around 300GB.
Ran Consistency Check and then Rebuild on Aperture 2 libraries before starting move to Aperture 3.
Backed up Aperture 2 Libraries on several hard drives (belt and suspenders).
Installed from Ap 3 disk.
Did software updates re slideshows and new RAW update.
Turned off Faces (can run this later).
Did not reprocess files, just the update. I will reprocess as needed, when I want to use new tools on old files.
Update on both Mac Pro (2006, 2.66GHZ, 7GB ram) and MacBook Pro (2008, 2.5 GHZ, 4 GB ram). No other application slowed down at all during update. Update took about two hours on each machine.
Library and adjustments are very snappy.
Printing went exceedingly well, after re-entering my presets.
Image Browser shows Aperture library.
Not a single problem so far. I've spent almost a week reading the posts here and I've seen all the problems some people have had.
In my view, a very, very impressive new version.

I know it really probably will not help but I submitted a bug report.
"17-Feb-2010 12:16 PM Brian Hursey:
Summary:
Major issue with Aperture 3 when converting A2 library's and projects to A3.
Steps to Reproduce:
Senerio 1. Open an existing aperture library. It tells you you will need to convert the library conversion only gets to about 5%.
Senerio 2. Importing and not converting an existing A2 library into a A3 library.
Senerio 3. Reprocessing masters on a imported A2 project.
Expected Results:
Conversion, importing processing needs to keep from locking up the system and making it unusable.
Actual Results:
Uses all systems resources and creates a 43+ gig swap file. Used 100% of both cores of my 2.0 ghz 2009 mac mini, and used all of the ram.
Regression:
System: Spring 2009 Mac mini. 2.0 ghz core duo, 2 gigs of DDR3 ram, Snow Leopard 10.6.2 , Aperture 3.
Notes:
Possible work a rounds 32bit mode will test tonight. "

BO XI 3.1 installation and Upgrade activity Steps

Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
         j2re1.4.2_04
         j2re1.4.2_16
         jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
Sridharan

Hi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb.

Crystal Reports and SAP BO XI 3.1 License purshase

Dear Professionals,
My company is looking forward to go for Crystal Reports 2008 from BEx.
I am looking for link for purchasing license for Crystal Reports and SAP BO XI 3.1 as well.
Besides the above, i am currently working on a free trial version of Crystal Reportds and also installed Crystal Viewer to publish the reports on the portal, but it was asking for Java Connector license key.
So, in addition to the above i also want to know the pricing for License of Javas Connector (JCo)
Your help is appreciated.

Hi
the Java connector is available here
service.sap.com/connectors
Regarding licenses and pricing I would recommend to contact your local SAP sales office.
Regards
Stratos

Crystal Report and Dash Board Report templates

Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
Aditya

Hi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM

EIS Installation and Configuration

Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick Response

I'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.

I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes

I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?

dcotejr wrote:
I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
You cannot.
By Design the iPhone can Only Sync to One iTunes Library at a time.

I have the new Oracle 8i installer and here is why

I have been trying to get Oracle 8i on Linux and I feel that I
must share
my thoughts on the new Oracle installer with everybody.
I hate the new installer. I used to run the installer from
home over my
128Kbps connection while I was connected to the office machines,
because it
was simple text based. And Oracle 8i has changed all that!
I have nothing against GUI based installers, only when they have
a little too
many animated images that eat up bandwidth. I had to drive all
the way to
the office because I did not have sufficient bandwidth to display
the darn
ringing bell animated image. This is strictly the mentality of
Windows users
who like to work on the console of servers.
And check this out:
line 118 in my install log file at :
/usr/local/oracle/u01/app/oracle/oraInventory/logs/installActions.log
says :
platGroup = WINDOWS
And this is on Linux!!! Maybe the Oracle folks are forgetting
that Linux
users are a little too sensitive to these kind of mistakes. :)
This also supports my theory that the new installer is a gift
from Windows
programmers. Who are not too familiar with the idea of being
able to send
their video display to any computer around the world and work
from there.
A feature every Linux user takes for granted
There are numerous other bugs in the installer and other routines
of Oracle
8i for Linux. Some of them I will list here:
2. The installation types screen list 3 options:
Typical, Minimal and Custom.
Somehow Minimal takes more disk space (642 MB) compared to
Typical (585 MB).
Well that is what the installation screen says. I have not tried
to install
using the minimal install.
3. The installation cant figure out how much free space is
available on the /
partition. Is it that hard? Its gives warnings about how I may
not have
enough space.
4. dbassist cant find the cdrom if you try to install the default
database
from CDROM. It says cannot find CDROM even if you have all your
stuff under
/mnt/cdrom
5. The docs talk about software mount points and data mount
points /u01 /u02
/u03 and /u04 that I created, but I could not find anywhere to
specify them
like I was able to, with the last release.
6. "Oracle Protocol Support" section during the install shows no
options at
all. What happened to good ole Net8?
And many others. This product is a joke.
Atif.
[email protected]
null

My sentiments exactly. There are so many bugs in the
installation of this release that I have just about given up.
And I haven't even started testing the new features yet!
I've tried the install on RedHat 6.0 straight out of the box (no
patches or updates applied) and followed the OIG and release
notes to the letter. Clearly, no one at Oracle did the same,
because there are many problems during install. I finally got a
simple database running, but there are some real gotcha's along
the way.
Here are just a few of the bugs I've encountered:
1. Zero length library file $ORACLE_HOME/lib/libnjni8.so.
Netasst doesn't work without it. Someone said they posted the
source code to the comp.databases.oracle.server newsgroup, but I
can't find it.
2. Database Creation Assistant thinks dbmssql.sql is called
dbmssml.sql.
3. Building the Intelligent Agent with TCL 7.5 causes a cascade
of undefined references when running gmake -f ins_oemagent.mk
agent
4. Database Creation Assistant doesn't understand OFA. It wants
to put all of the database files /u01/app/oracle/oradata/<sid> !
5. Database Creation Assistant will sometimes prevent editing
the data file names to put them in OFA compliant directories.
I am appreciative of the free developer licenses for so many
Oracle products, but this is the worst Oracle install I've had
in 12 years.
Atif (guest) wrote:
: I have been trying to get Oracle 8i on Linux and I feel that I
: must share
: my thoughts on the new Oracle installer with everybody.
: I hate the new installer. I used to run the installer from
: home over my
: 128Kbps connection while I was connected to the office
machines,
: because it
: was simple text based. And Oracle 8i has changed all that!
: I have nothing against GUI based installers, only when they
have
: a little too
: many animated images that eat up bandwidth. I had to drive all
: the way to
: the office because I did not have sufficient bandwidth to
display
: the darn
: ringing bell animated image. This is strictly the mentality of
: Windows users
: who like to work on the console of servers.
: And check this out:
: line 118 in my install log file at :
: /usr/local/oracle/u01/app/oracle/oraInventory/logs/installActio
ns.log
: says :
: platGroup = WINDOWS
: And this is on Linux!!! Maybe the Oracle folks are forgetting
: that Linux
: users are a little too sensitive to these kind of mistakes. :)
: This also supports my theory that the new installer is a gift
: from Windows
: programmers. Who are not too familiar with the idea of being
: able to send
: their video display to any computer around the world and work
: from there.
: A feature every Linux user takes for granted
: There are numerous other bugs in the installer and other
routines
: of Oracle
: 8i for Linux. Some of them I will list here:
: 2. The installation types screen list 3 options:
: Typical, Minimal and Custom.
: Somehow Minimal takes more disk space (642 MB) compared to
: Typical (585 MB).
: Well that is what the installation screen says. I have not
tried
: to install
: using the minimal install.
: 3. The installation cant figure out how much free space is
: available on the /
: partition. Is it that hard? Its gives warnings about how I
may
: not have
: enough space.
: 4. dbassist cant find the cdrom if you try to install the
default
: database
: from CDROM. It says cannot find CDROM even if you have all
your
: stuff under
: /mnt/cdrom
: 5. The docs talk about software mount points and data mount
: points /u01 /u02
: /u03 and /u04 that I created, but I could not find anywhere to
: specify them
: like I was able to, with the last release.
: 6. "Oracle Protocol Support" section during the install shows
no
: options at
: all. What happened to good ole Net8?
: And many others. This product is a joke.
: Atif.
: [email protected]
null

What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers.

Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
              if (lstProducts.Items[i].Selected)
                            if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                productUnit.Add((decimal?)prod);
                                counter++;
       if (counter == 0)
                   productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
          CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
          ReportLogon rptLog = new ReportLogon();
         rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
         retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank you

Hi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal installation and 3.1

Similar Messages

Maybe you are looking for