Crystal installation error in product keycode

Hi.
I´m trying to install the crystal server 2008 and when i inform the keycode product the system show the following message:
"The product keycode you entered is not valid. STU000140".
But, i did not put this code. I put this one:
CUK08-H6SPA47-000E05T-96N0.
What is happening ?
Thanks.
Wagner

Hi Wagner,
STU000140 is not your keycode but error message code. It means the same thing as the message itself.
You should not post your real keycode here. I suspect somehow this keycode has already been used in some other installation.
If you reinsatall it in the same computer, the error message should not be poped up. Call Crystal's support to find the reason.
Thanks,
Gordon

Similar Messages

Universal Installer Error during Product Prerequisite checks

Hello everyone !
First to say, I'm a newbie with Linux. So please be kind with me.
I'm trying to install Oracle Database 10gR2 on my newly installed redhat 5 enterprise linux client release 5.2 .
After solving some issues with missing packets I'm now confronted with a new problem after having successfully launched Oracle Universal Installer. OUI tells me, that "Oracle Database 10g is not certified on the current operating system". More precise :
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-Red Hat Enterprise Linux Client release 5.2 (Tikanaga)
Check complete. The overall result of this check is: Failed <<<<
Can anyone help ?
Best regards,
Wesam

Oracle 10gR2 is not certified on EL5 when it was released.
you can run
runInstaller -ignoreSysPrereqs
also check these metalink doc
Note 376183.1 - Defining a "default RPMs" installation of the RHEL OS
Note 419646.1 - Requirements For Installing Oracle 10gR2 On RHEL5 (x86)
Note 456634.1 - Installer Is Failing on Prereqs for Redhat-5 - RHEL5

Business Object Installation Error code STW00140

Hi Gurus,
During Installation I am getting error
The product keycode you entered is not valid : STW00140
I am installing on XP.
could any one help me?
Thanks in advance
Jack

Try a temporary license key from http://service.sap.com/licensekey
If it works, request for a permanent key at the same location.
Thanks
Subhodeep

SAP Crystal Reports 2011 - Product keycode

Dear all,
I have been requested to install SAP Crystal Reports 2011 to use it as a reporting tool for our SAP ERP 6.0.
However, I got stuck when the installation program asks me for the "Product Keycode". Does anybody know if there is a temporary product keycode so we can evaluate this product before purchasing it?If so, where is it?
Once SAP Crystal Reports 2011 is successfully installed, do we need to install anything else in order to set up the connection between SAP Crystal Reports 2011 and SAP ERP 6.0?
Thanks in advance,
Marc

Since someone on your site obtained CR 2011, they should also have a permanent keycode...
Failing that, the only way to get a 30 day temp eval keycode is from here;
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
But you will still have to go back to who ever obtained your current CR 2011 and ask them for a permanent keycode.
Re. Connection to SAP ERP 6.0. You're better off asking in the SAP Crystal Reports Database Connectivity|SAP Crystal Reports - Data Connectivity; forum rather than in this forum.
- Ludek

Windows 7 Production Premium CS4 language pack installation error + solution

Ok. Long story short...(For solution scroll all the way down)
Tried to install ubuntu next to my windows vista. Next day I found myself wondering in store searching for windows 7 because Ubuntu install ruined something somewhere inside my computer and neither one of my OS were not starting at all...
Ok. So I purchased Windows 7 with smile in my face and happiness in my soul! Now it´s clean installed and working and I have to say it is much better than Vista was...
Already installed 3d max 2009 and couple of other old programs and works like charm and softwares are starting fast!
...BUT
Today I tried to install my wonderful CS4 Production Premium package to this computer. All went well all the way to the end report where it said something like "installation error" and then there was few products or files on the list which it was unable to install...(I can post the exact list tomorrow when I try to uninstall and then again install suite the fourth or fifth time in a row.) After error report I was really worried. First I tried to start Photoshop and all I got was error report "some of the application components are missing from the application directory. Please re-install the application." Then I tried Illustrator and the message was "the localized resource files for this application could not be loaded. Please re-install...blah blah..." When I try to open Onlocation I get windows error "Adobe Onlocation has stopped working." Bridge and Media Encoder are working! But when tried to start After Effects, Premiere and Soundbooth it just opened the serial key window. When I write the serial from my dvd-box backlabel it gives me the nice big red X and says that my serial is not valid. But my serial was really valid just a while ago when I started to install these softwares! Oh please NO!
Ok. So...Questions shortly:
How to get my Production Premium installation work in Windows 7 and get back to work?
How to de-activate my softwares after computer breakdown or user stupidity leading to computer breakdown so I can use my softwares again?
EDIT:
Well...This is what I got from the error report:
Adobe After Effects CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Encore CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Flash CS4 Extension - Flash Lite LangPack Common
Error:
Error 2.
Adobe Flash CS4 Payload LangPack (en_GB)
Error:
Error 2.
Adobe Illustrator CS4 LangPack (en_GB)
Error:
Error 2.
Adobe OnLocation CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack_x64
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Soundbooth CS4 LangPack (en_GB)
Error:
Error 2.
LangPack (British) for DeviceCentral
Error:
Error 2.
Tried installing different language but it still won´t work...
Can´t install it in safe mode and installing trough troubleshooters different windows versions won´t work either...
Any ideas anyone?
EDIT:
Tried creating .nrg dvd-images with Nero and installing from harddrive instead of dvd-discs but still no luck. So problem is not in my dvd-drive or discs...
EDIT:
SOLUTION...
Adobe support answered to my question. I was missing a DOCUMENTS folder from my USERS - PUBLIC path and after I created that and un-installed & installed my production premium package, everything worked like it should! You might encounter to this same problem also if your USERS - PUBLIC - DOCUMENTS folder has some security settings on... Just right click the folder, choose security and check full control in permissions and remember to sign in as administrator when you install any software...
Hope this tip is helpful!
Now...Back to work!

WOH, just what I needed.
My problem was, that I have moved my documents to another partition, but the public parts I unfortunaly don't had thinked about. . This was 'the solution'! Thank you J_Suhonen!

Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

Crystal Reports 2008 Installation Error

Hi,
I have bought CR 2008 from third-party vendor online. I am trying to install it on my Laptop (Windows XP SP3).
It asks for Language (selected English). Then after accepting License Agreement and entering Product KeyCode, Typical Installation option is selected.
System then checks for disk space requirements and after that it starts installing the CrystalReports. After few minutes the installation is hanged.
On screen I see that at the time of freezing it was registering modules like shortcut.dll or pdf.dll or LicenseKey.dll etc..Everytime I try to install it is different dll when installtion is stopped. I have waited for couple of hours hoping that installtion will be complete but it never finishes.
I have tried so many times but every time it freezes when it tries to register some dll.
I have then downloaded trial version from the Web and tried to install from there, but again I'm getting the same result.
Any help in resolving this issue is very much appreciated.
Thanks

Hi
I assume you are trying to install the CR Designer 2008 V0 package. Unfortunately this is not compatible with Windows XP SP3. Talk to the online vendor and request the CR Designer 2008 V1 package (you can use the same poduct code to activate it).
Regards,
Stratos

Crystal Reports Server 2008 Installation Error

Good day,
My name is Dominic Hung and I work at Business Objects. One of my clients is coming across an installation error on their evaluation of CRS 2008 and is detailed as follows:
They currently have the actual report writer (Crystal Reports 2008) on a desktop PC. It's not installed on the server.
We have the MySQL ODBC loaded on the local desktop as well as the server that is hosting CR2008 Server.
The credentials (userid/password) used in both the desktop and server's ODBC configuration is READ ONLY.
During the installation wizard for CR2008 Server, I key in the userid & password that I use when we create reports, but I receive an error stating that
CMS database error: STU000226
BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "esc:10.127.214.22:3306". Reason: Database access error. Reason access denied for user 'jdcherry'@'% to database 'esc'
This is where everything stops and they can't go further. They are not sure why they are receiving the "access denied" error as shown above. They have no problem connecting to the MySQL database when they create a report using CR2008, the CR2008 SERVER won't accept my credentials during the installation.
QUESTIONS:
The "jdcherry" UserID (which I use) is READ ONLY on the MySQL database that's hosted on the Linux box. Does the userID have to have higher priviledges than just READ ONLY in order to validate the database credentials?
If so, what level of access is required?
Does the installation of CR Server update any of the tables that are stored on the MySQL database?
Do we need to install the Crystal Reports 2008 on the server in order for Crystal Reports 2008 SERVER to work?
What other workarounds can be done for the client? The windows server they have Crystal Reports Server 2008 installed on has web services enabled but are continuing to come across issues. Any insight for the client would be greatly appreciated.

Does the userID have to have higher priviledges than just READ ONLY in order to validate the database credentials?
The userID used when installing CRS must have dba previleges (create/drop tables) on the schema.
Does the installation of CR Server update any of the tables that are stored on the MySQL database?
You should create a new schema/DSN for the CMS db. The installation of CRS creates 8 new tables.
Do we need to install the Crystal Reports 2008 on the server in order for Crystal Reports 2008 SERVER to work?
No
All this information is in the BOE XI3.0 Installation Guide.

Production Premium CS5.5 Installation "Errors?"

I just received my new Production Premium CS5.5 Upgrade package, Since things were getting ratty with the old Win 7 64 I tried to do a fresh install on my Dell Win 7 64-bit T7500 workstation. However, I ran into errors similar to those pointed out by Todd here: http://kb2.adobe.com/cps/902/cpsid_90243.html However, I had a few more in the error summary:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.2E930BP-1017rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091 e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\BILLWO~1\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\BILLWO~1\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed
Is this more of the Installer false errors bug?
Bill

For what it's worth, I just went through and extended session with Adobe support re: CS5.5 throwing an error up front, i.e., aborting the installation before it got under way. It turned out my problem was with the Adobe Flash Player. Apparently, if you've updated your flash player to a later version than is included in the CS5.5 installer, it will throw an error. In my case, I had just updated my Flash Player to 10.3 a day or 2 before I tried to install PP CS5.5. The cure was uninstalling Adobe Flash Player 10 Active X and Plugin and running the installation again, which encountered no errors/problems. I went ahead and updated to Flash Player 10.3 afterwards with no problems (so far).
If my memory serves me correctly, a couple of weeks when I installed Design Premium CS5.5, I got an error message after the installation that mentioned the Flash Player, but I couldn't detect any problems with with any of the programs I subsequently used. I think at that time I was running and updated version of Flash Player 10, but am pretty sure I had not installed 10.3 at that time. I'm guessing that whether it throws a pre or post installation error may depend on which package your installing and/or which Flash Player 10+ version your using.
Jim

Crystal Reports XI installation error with boagent.exe

When installing the trial Crystal Reports XI R2 SP2 on Vista Home Premium SP2, I am getting a popup with an error: abnormal program termination with C:\Program Files\Common Files\InstallShield\UpdateService\boagent.exe. And then the installer shows Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. This happens toward what seems the end of the installation process. I can run Crystal Reports fine after that and most features seem to work OK but I am not sure if all features are installed correctly.
I have tried installing with DEP disabled and changing the compatibility mode of boagent.exe to XP SP2. I also tried installing the full trial SP4 too, but I am getting the same errors all the time. Repairing or uninstalling Crystal produces the same error too.
What is boagent.exe and how does the Crystal installer use it? Is there log file where I could see more details and what possibly failed to install?

Download SP 4 and try again then you can install SP 6

The Product Keycode is Not Valid: INS00140 (Windows 7)

I'm a first-time poster... I was trying to install Crystal Reports 2011 on my Dell Latitude with Windows 7 Enterprise and I went through the installation process today. I wanted to go through the 30 Day Trial before I actually decide to purchase a license and I received a trial license key. I downloaded the trial and promptly received an e-mail with my license key. I tried to enter my license key and I had an error message that said, "The Product Keycode is Not Valid: INS00140." I was shocked that the password failed to work and then I tried various different ways to enter said license key. Copy & paste, typing, with dashes, without dashes, uppercase letters, and lowercase letters. Every license key entry attempt failed.
I contacted the Crystal Support team and they provided me with another download link to Crystal Reports 2011 and a trial license key, I ended up having the same results. Now I'm left wondering what to do to be able to access this trial version of Crystal Reports 2011. Any help would be appreciated.

Steven,
The forum post mentioned above has another link to the following thread:
[SAP Crystal Reports 2011: Error INS00140 and other install errors;
Have you reviewed it? It has solution applicable for other than XP OS.
Please let me know if you tried any of them and we will plan next steps.
Vitaly Izmaylov

Product Keycode Does Not Work

I need help with a product keycode. I am trying to install Crystal Reports 11 on our server and its not taking the code.
Thanks.
Chris

I have a similar issue with the Business Objects Edge Series 3.0 trial version.
The key code email I received thanks me for my interest in Business Objects Crystal Decisions, is this the same product?
The code does not work, thanks.
Edit> I have now received a working code from Business Objects, installation now proceeding, many thanks
Edited by: Duncan Farquhar on Jul 23, 2008 2:41 AM

Error reading product file driver files

When attempting apply a large merge patch I receive the following error:
Screening out files not valid for this installation...
Determining valid on-site files...
AutoPatch error:
The following file is missing:
/oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
AutoPatch error:
Error reading product file driver files [complete; make tapes]
AutoPatch error:
Error determining valid on-site files
Any ideas?
I've tried using options=noprereq option, but that didn't help.

- Try to restore the file from a backup you have Or just copy it from any other environment.
- Make sure that you have included all pre-req patches in the merged file.
I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

Installation error in invoking target 'agent nmhs'

Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size          1336624 bytes
Variable Size          922749648 bytes
Database Buffers     553648128 bytes
Redo Buffers          12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-Khaffaf

Hi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13.

Installation error message 1603 for itunes 8.0.2.20

Need help. Installation keeps failing. Says that it cannot install. I'm on XP Professional. Removed all Itunes and QuickTime software using MS Uninstaller. I've disabled ant-virus and firewalls. Below is the text from the ItunesSetup.txt in the temp directory
=== Logging started: 2/6/2009 15:06:18 ===
Command Line:
Using single-platform PRODUCTCODE.
Product to install: {F5C63795-2708-4D15-BF18-5ABBFF7DFFC8}
Information on cabinet file 'C:\Documents and Settings\TaranDiya\Desktop\iTunesSetup.exe'
Total length of cabinet file : 68878416
Number of folders in cabinet : 1
Number of files in cabinet : 7
Cabinet set ID : 0
Cabinet number in set : 0
RESERVE area in cabinet? : no
Chained to prev cabinet? : no
Chained to next cabinet? : no
fdintCABINET_INFO
next cabinet =
next disk =
cabinet path = C:\Documents and Settings\TaranDiya\Desktop\
cabinet set ID = 0
cabinet # in set = 0 (zero based)
fdintCOPY_FILE
file name in cabinet = iTunes.msi
uncompressed file size = 37101056
fdintCLOSEFILEINFO
file name in cabinet = iTunes.msi
fdintCOPY_FILE
file name in cabinet = QuickTime.msi
uncompressed file size = 27953664
fdintCLOSEFILEINFO
file name in cabinet = QuickTime.msi
fdintCOPY_FILE
file name in cabinet = AppleSoftwareUpdate.msi
uncompressed file size = 2083840
fdintCLOSEFILEINFO
file name in cabinet = AppleSoftwareUpdate.msi
fdintCOPY_FILE
file name in cabinet = AppleMobileDeviceSupport.msi
uncompressed file size = 13441536
FDICopy() failed: code 4 [Corrupt cabinet]
Executing: "C:\WINDOWS\system32\msiexec.exe" /i "C:\DOCUME~1\TARAND~1\LOCALS~1\Temp\IXP055.TMP\iTunes.msi"
Returning: 1603

I am not sure about this particular error number. Looking it up in Windows Installer error messages, it says file in use, restart may be required. But I am not certain that it is a Windows installer error message.
It certainly is worth trying a restart.
I would also clear your temporary Internet files and re-download iTunes.
Also clear your temporary directory as that seems to be where the error occurred.
This article on trouble installing iTunes includes instructions for clearing the temp folder (towards the end of the page) and also other things to try.
http://support.apple.com/kb/HT1926

Crystal installation error in product keycode

Similar Messages

Maybe you are looking for