Crystal Layout Import problem in SAP 8.81 PL 07

Hello
When i import Crystal Report by
Administrator
Setup
General
Report & Layout Manager
When i click on Import button Then i click on next button it can't go ahead
when i close SAP 3 to 4 times its go ahead for path selection but i have to close SAP many times
So what is the exact problem?

Hi Jaykumar,
You are absolute right some times this type of situation occured in SAP but there is no permanent solution for this.
You have to upgrade your SAP to next PL and try again. otherwise
Goto -> Crystal Reports -> Add-ins.
Thanks,
Srujal Patel

Similar Messages

Crystal Report Viewing Problem in SAP b1 2007

Hi ,
I have Installed Crystal Report Add On for 2007 SAP B1 but while display report i have getting following error,
Any one can tell me what i have to do,please resolved my issue
could not load file or assembly 'CrystalDecisions.Windows.Forms,Version=12.0.20000.0,Culture=neutral,PublickeyToken=692fbea5521e1304' or one of its dependencies,the system cannot find the file specified
Thanks
Chaitesh

Julie.
This change has already occurred?
Thanks.

Crystal Report Preview vs. SAP B1 Report Preview as a Layout under Content Type

Hello good day i'm trying to create a report that will be preview under A/R Invoice but the details need is under delivery module for example i create a serialize Item and set the Management Method on Every Transaction Under Item master data, so the transaction flow will be like this SO -> Delivery -> A/R Invoice. So under delivery transaction i will choose the serial that i will deliver so that under A/R Invoice Transaction i will no longer choose again the said serial that i choose on Delivery Transaction. There for on my Report i will Based on Delivery Transaction to get the chosen Serial But the Report will be Preview under A/R Invoice.
The main concern on This is why when i preview the said Report under Crystal Report the serial is showing but when i Import it on SAP B1 as a Layout under Content type it is no longer showing the serial on the preview?

Please post to the SAP Business One Application forum
- Ludek
SCN Moderator

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

User defined fields in Crystal layout

Hi All,
I want to add user defined field values in crystal layout for Sales order, but its not listed in RDR1 tables there but it's available in SAP query manager view. How can i get that in Crystal reports. please suggest on this.
Regards
Sree

You can then remove the key and the fields in the database will keep their correct definitions rather than varchar(max) which is causing the initial problems.
Adding extra keys may uause performance issues if you leave them there for a large table.
I have also had issues of varchar(max) fields causing database connection issues when running the reports in 8.81 PL07.
Rob

EPSON LQ - 2180 ESC/P2 : print setting problem from SAP b1 8.8 PL 19

Hi All,
we are SAP Business One Customer, I have created Crystal Report and using Printer : 'EPSON LQ - 2180 ESC/P2',
I have selected Same Printer in Printer Option
Orientation is 'Portrait'
Paper Size 'US Std Fanfold'
but print out comes in Vertical Format, we want to print it in Horizontal format
I Tried many times in Landscape and Portrait format but print comes in Vertical format.
I have checked some following conditions:
1. If printer is in 'Portrait' format then test print is OK..
2. If Crystal Report is in 'Portrait' format then test print is OK..... directly print from Crystal Report
3. whenever I take print out from SAP B1 for same Crystal Report with same setting but print comes in vertical format.
I am attaching Print Setup screen print with this mail, pls kindly find the attachment.
Pls give me feasible Solution as soon as possible.
Thanking you in an obligation.
Regards,
Babu Terve

hi Datta,
when you say S-Account, this account is needed when we use the SAP Portal. Contact your SAP Partner to get your S-Account. regarding the note i will quote it here
1535606 - Printer preference setting for the Crystal Layouts
Symptom
Print Crystal Report layout does not consider Business One (B1) printer preferences changed by user before printing.
In order to enable B1 to make print preferences changes in application the Crystal Report Layout must have ticked off the "Dissociate Formatting page Size and Printer Paper Size" option in page setup.
The following preferences are enabled for the Crystal Reports Layouts:
1. Orientation: "Portrait" or "Landscape".
Note! In case the report is too wide to fit on rotated page, error message is returned.
2. Document Options: Duplex printing (Print on both sides).
3. Paper Options: Paper size.
Note! The options Custom Size will not be considered by B1.
Note! In case it is not possible to print on some paper size error message is returned.
4. Paper/Quality: Print Quality/Printer Resolution, Paper Source.
5. Color Options.
Note! Crystal does not resize the report to fit the selected paper or format.
Cause
Application error
Solution
As a workaround, please change the Page Setup to Landscape in Crystal
Report designer itself.
SAP intends to provide a patch or patches in order to solve the problem
described. The section Reference to Related Notes below will list the
specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number. Please note that these references can only be set at patch
release date. SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
Other terms
Print Setup, print preference
Header Data
Released on     06.12.2010 15:05:56
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with medium priority
Category     Program error
References
This document refers to:
SAP Business One Notes
1540128           Overview Note for SAP Business One 8.8 Patch 18
This document is referenced by:
SAP Business One Notes
1540128           Overview Note for SAP Business One 8.8 Patch 18
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
regards,
Fidel

Crystal Layout login failed in workstation

Dear all
I'm using SAP 8.8 PL16, i have two invoice layouts in crysta, thar works fine in the SAPclient installed in the server.
The issue is In the workstations can´t print or preview, the crystal layout doesn't opens, login sa failed.
I´ve already done the set location, but don´t work.
Kind regards,

Hi Ken
This is a known issue in PL07 that SAP are looking at
Have a look at these posts. There are others related to this problem as well
Crystal Reports system layout requires database logon on SBO 8.81 PL06
Problem after upgrding to SAP B1 8,81 PL07
Crystal layout connection reverting to original
Hope this helps
Rob

Standard Crystal Layouts

Hi experts,
In current versions of SAP Business One, new Crystral layouts can be imported and managed through the Report & Layout Manager. However, the PLD standard layouts are integrated into SAP B1 and can be accessed directly from the layout designer without importing them.
So, will SAP offer standard Crystal Layouts like PLD layouts without the need to import them?
Thank you.
Nadia.

Hi Nadia,
always ensure when editing SAP Layouts, that you disable smart linking. You can find this option through the SAP Crystal Reports Menu. FIle => Option => Database => uncheck Smart Linking
Best regards,
Darius

Crystal Reports transport files for SAP APO / SCM

Hi there,
Problem: we want to use Crystal Reports on top of SAP APO / SCM and have some difficulties getting the definitions of BW / OLAP servers right and don't know which transports to import on the SAP to report with Crystal.
System is a SAP SCM system with APO module. There is a cube in this module (because there is some internal BW system) and I can see the cube in Crystal Reports. When I want to report from this cube I get an error:
"/CRYSTAL/MDX_GET_STREAM_INFO" not found.
This means some transport files were not imported and some functions are missing.
The following transports are missing:
====quote from transports_EN.txt included in transports for Crystal Reports=====
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
===========================================================
My SAP BASIS expert refuses to import these transports in SAP SCM, because he thinks it is not an SAP BW system as listed in the above transports_EN.txt file. Just trying is not an option because transports cannot be removed once imported...
In my opinion these transports have to be imported to clearly access the cube and will work on SAP SCM even if it's not a 'dedicated' SAP BW environment. In other words, these transports should be imported and will work on SAP OLAP servers like SAP BW, SAP SCM, SAP SRM (APO) or SAP SEM.
Does anyone of you have some more experience on reporting from SAP SCM / APO cubes and if I can import these transports without getting some nasty errors, because its not an SAP BW system?
Kind regards!
Edited by: J. van de Mheen on Mar 3, 2009 4:21 PM

Thanks for your reply, but this is not helping me much.
Let me explain more.
In the transport_EN.txt file we see this:
If your SAP system is running on a 6.20 *BASIS system* or later, you must use the files listed below:
(These files are Unicode enabled.)
* Open SQL Connectivity transport (K900574.r21 and R900574.r21)
* Info Set Connectivity transport (K900575.r21 and R900575.r21)
* Row-level Security Definition transport (K900576.r21 and R900576.r21)
* Cluster Definition transport (K900585.r21 and R900585.r21)
* Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an *SAP BW system*:
(These files are Unicode enabled.)
* Content Administration transport (K900579.r21 and R900579.r21)
* Personalization transport (K900580.r21 and R900580.r21)
* MDX Query Connectivity transport (K900581.r21 and R900581.r21)
* ODS Connectivity transport (K900582.r21 and R900582.r21)
So I have to import 5 transports in SAP BASIS system and 4 transports in SAP BW system to make full use of the integration kit.
SAP SCM / APO is basically a BASIS system, so the BASIS expert says only those 5 transport have to be installed.
But SAP SCM / APO is also having some reporting capabilities and stores data in OLAP cubes (Infocubes).
In Crystal I can see these cubes when using SAP BW MDX connection.
To make the error go away, I must have some function modules used in transport 'MDX Query Connectivity transport. But the BASIS expert doesn't want to import this transport, because it is listed as a transport for a SAP BW system and he says SAP SCM / APO is NOT a SAP BW system (it's a BASIS system).
And now I have to get some proof that this transport has to be imported in the SAP SCM / APO BASIS system before he installs it...

Report and Layout Import Wizard does not work

We used the Report and Layout Import Wizard extensively in 8.80 with no problems encountered.
We are now upgraded to 8.81 PL07. This is the first attempt at using the wizard in 8.81. The intro window of the wizard, with 'To Start, use the "Next" button' message is as far as I can get. The "Next" and "Cancel" buttons are inoperative - when I click them, there is no response (but they are not greyed out). The program has not crashed - I can move the window, and the "X" close button at top right works, but nothing else does. I am logged in as a superuser, running B1 in an RDP session on the server, same as under 8.80.
Any ideas out there?

Hi,
This is a 8.81 PL07 bug!
I had the same problem this week, and i found the note [1615932 - Buttons "Cancel" and "Next" are inactive in Report and layout import wizard window], that says that it is corrected on PL08!
Regards,
Alice

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal Reports when connecting to SAP ERP gives Logon Failed error

Hello Friends,
We are trying to implement the SAP Best Practices Crystal Reports and Xcleisus Dashboards for ERP. We are using BI 4.0 SP2, Crystal Reports 2011 SP2 and SAP ECC 6.0 FP 5.
We have done all configurations at the SAP end and successfully adpated a couple of Crystal Reports and they work fine.
My client machine crashed and I had to reinstall my Windows and all Client Tools. After the installation, when I tried to adapt a few more reports, I face the below problem:
After opeing the Crystal Report, when trying to Set the DataSource location, I select Create New Connection and select SAP Infosets. The SAP logon popup comes and I select the ECC system and enter the logon credentials for SAP ECC, I get an error message saying
Logon Failed.
Details: some square boxes.
The error doesnt really make any sense. Unfortunately, I am not able to test this scenario in any other machine as I am the only developer here. I am almost sure this is because of some configuration set up in my client machine,
Can some please help?
Thanks in advance!

Hello,
I recommend looking at a couple of things:
1) Do you have the latest Crystal transports installed with ECC? SP 2 has new transports. Check this subdirectory
Crystal Reports 2011\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports\unicode_compatible\cofiles
Use STMS to see if transports are installed
2) Are you using 3.1 ? Do you have the Integration Kit installed on ECC and client side?
Tammy

Error in Importing Data from SAP BW ( XMLA )

HI All,
I am trying to import a physical schema from sap bw ( sap user has all grants ) through the XMLA access
IN repository I see objects ( connection pool, hierarchies, dimensions, measures ) and in a while I get them to the presentation layer accessible for users.
Though when I try to access data build the query I get the following error:
OPR3ONWY:U9IM8TAC:DI2DL65P
HY00 Code 10058 [NQODBC][SQL STATE HY0000][NQSError 10058] A general Error has occurred XMLA Error returned from the server.
Can you please help me in understanding how to solve the problem?
Thanks a lot.
Best regards to everybody.
Filippo

mithuu wrote:
HI Filippo,
Sorry to reply to this post,
Could u please tell me ...what shud be given in URL which is prompted when trying to Import data from SAP bw while creating a repository.
I am a beginner and tried to seek help from the sap basis guys but of no help.
Appreciate ur help,
Many Thanks...Hi Mithu,
Give the SAP Multi-Dimensional Database server URL and a username, password required to access it.
If you do not know them, ask your TL/PM, if u do not have one ask the SAP Data warehouse DBA.......
Venkat
Edited by: OBIEE+ on Jan 27, 2009 2:21 AM

Crystal Report Viewer Control on SAP Form?

We are using Crystal Report XI to create custom SAP reports. We have integrated this into our Add-On by adding the Report Viewer Control to a Windows form and setting it's report source at runtime. This works ok but is a bit cludgy looking and causes some focus and redraw problems with SAP. I have tried for weeks to figure out how to get the ActiveX control onto an SAP form but with no luck.
Here is my code sample:
SAPbouiCOM.Item oItemX;
SAPbouiCOM.ActiveX oActX;
CrystalDecisions.Windows.Forms.CrystalReportViewer oCRX;
oItemX = this.sboForm.Items.Add("U_CRCtl", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X);
oItemX.Left = 0;
oItemX.Top = 0;
oItemX.Height = this.sboForm.Height;
oItemX.Width = this.sboForm.Width;
oActX = (SAPbouiCOM.ActiveX) oItemX.Specific;
oActX.ClassID = "{5E093535-5A5D-4E72-ACCD-F10B6D065BC9}";
oCRX = (CrystalDecisions.Windows.Forms.CrystalReportViewer) oActX.Object;
oCRX.ReportSource = @"c:\Test\Test.rpt";
I am not sure why this will not work. I always get either 'Specified cast is not valid' or 'Invalid Class ID'. If anyone has done this successfully or has any suggestions that would be great! Thanks for your help!
David

Hi Ibai,
Thank you for your interest in CrystalWave. I tried sending this info to the email address you gave but got an undeliverable message.
The links are as follows:
(please use Internet Explorer while accessing the download link)
1. CrystalWave info: http://www.twbs.com/CrystalWave.html
2. CrystalWave download: http://www.twbs.com/cwrfiv2004.asp (You need to fill in your info and the download will start.)
Please do let me know if you are not able to access these links and I can setup a temporary link for you to download the program.
Thanks,
Gopal Viswanathan

RFC Import from own SAP XI results in java.lang.NullPointerException

Hi All,
I'm trying to do an import of a local RFC (developed in SAP XI) but this results in a java.lang.NullPointerException
RFC import from other SAP system is no problem.
Anyone an idea?
Cheers,
Frank

Hi,
But we are using custom RFCs from SAP XI only. We are using XI3.0 SP11.
Could you pls check the following sap notes..
SAP Notes 677732, 672745, 212011, and 718320.
Have a look at the following link...
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
Thanks,
Sasi

Crystal Layout Import problem in SAP 8.81 PL 07

Similar Messages

Maybe you are looking for