Crystal Layout login failed in workstation

Dear all
I'm using SAP 8.8 PL16, i have two invoice layouts in crysta, thar works fine in the SAPclient installed in the server.
The issue is In the workstations can´t print or preview, the crystal layout doesn't opens, login sa failed.
I´ve already done the set location, but don´t work.
Kind regards,

Hi Ken
This is a known issue in PL07 that SAP are looking at
Have a look at these posts. There are others related to this problem as well
Crystal Reports system layout requires database logon on SBO 8.81 PL06
Problem after upgrding to SAP B1 8,81 PL07
Crystal layout connection reverting to original
Hope this helps
Rob

Similar Messages

Crystal reports "Database login failed" when using push method

I have a web application (ASP.NET, .NET v3.5), that pushes data to a CR 2008 report. On two servers one of the three reports returns a "Database login failed" error. I am stumped since there is no login, it's push not pull; in addition the problem is hard to debug since it works fine from my developers workstation. I have "updated" the xsd in that report, reinstalled the app, etc., non of which helped. If anyone has a solution or even ideas I'd appreciate the help.

What about following the troubleshooting steps as described in the blog;
Create an XML file off of your dataset. Make sure this is done just before you set the dataset to the report:
rpt.Load(rptPath)
myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
rpt.SetDataSource(myDataset)
Copy the above created XML to your development system
Open the problem report in the Crystal Reports designer
In the Desigger, go to the Database menu and select u201CSet Datasource Locationu201D
In the u201CReplace with:u201D pane, expand the u201CCreate New Connectionu201D folder.
Double click the u201CADO .NET (XML)u201D icon
Browse to the location of the XML file you created in step (1)
Click on the path to the XML. The <Update> button should enable
Click on the <Update> button
Typically, either of the following will happen:
You will get a u201CMap Fieldsu201D dialog. This indicates that the XML written off of your dataset does not match what the report is expecting. This may be due to incorrect fields name, incorrect field type, etc. You will now need eliminate the difference.
Incorrect data or no data. There is an issue with your dataset and you need to determine why the data is not present in your dataset. Looking at the XML may be a good place to start.
Ludek

Login Failed error while creating a CR using Universe

Hi,
We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
For ex universe name is : xyz
Now i want to use this universe in crystal reports, we are using CR2008.
I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
After this when we click Ok it is giving an error message saying that Login Failed
We are unable to get the solution for this anybody please guide us to solve this.
Regards,
Pradeep.B

Have you checked out this article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
It has a section on troubleshooting Universe connections.

Reports successfully execute but generate a login failed for user 'sa' err

I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

"Login Failed for user" in Standard Report Creation Wizard

I am trying to create a report using the report wizard in CR 08. When I choose new connection ==> OLE DB(ADO)==>Microsoft OLE DB Provider for SQL Server and enter the Server and user ID (no password), I get the error "Login failed for users".
SQL State: 42000
[DataBase Vendor Code: 18456]
I was using CR 10 and called the 1-866 # and was told to try it wil CR 08 and Im getting the same error. I know the log on information is correct because I use the same server name and userID to login with SQL Server management studio and Visual Studio 08.
Please let me know what I can do to link CR to my SQL Database.
Thanks,
John

How is your user accessing the site?
Did you extend it to a different zone, and if so what authentication provider are you using for that zone or is it the same zone?
Looks like the domain is a workstation name? are they logging in with valid credentials for the WIN-IMH9QUCN1FU workstation, which may be different than what they usually log in as?
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-Walt

Yes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt

OBI publisher on Jboss Server AS7 [login failed]

Hi, I've deployed OBI publisher on Jboss Server AS7 but when i try to authenticate with Administrator/Administrator the response is login failed. Thanks for your support i'm blocked

Thank you for the replies and I am trying to answer the questions in your replies here
Kranthi : To open in online mode,the BI server should be up so it accepts the password and then directs you to the layout. That is the case, I have OBI server up running and accept login from Answers page.
Kranthi: first you should go through about offline/online modes before proceeding further.You can go through this from the BI answers user guide. The BI Answers user guide I found is OBI Answers, Delivers, and Interactive Dashboards User Guide, B31767-01 for Version 10.1.3.2. I could not find info for security management or login/password. Can you be more specific?
Srinivas Malyala: Cross check are you accessing Linux Box rpd on WindowsWhich credentials are you using LDAP or DB etc
Have you properly configured DSN to access Linux RPD. >
I am not sure how OBI RPD authenticate logins. I am not using LDAP. I do not have a user Administrator in my Oracle database. Thus it does not appear authenticated with DB.
I have a DSN configured on the window box, and be able to import database objects.
Srinivas Malyala: Can you update us exact error message. The only message is "Logon failed." Too bad I cannot attach a file to show the message box. But you can get the same message when you login to the window Admin Tool online or offline with a wrong password.
OBIEE developer : chk whether the rpd property is read only.. How? But I know if I open it offline, it it says the rpd is read-only. That is because it is opened by the server.
OBIEE developer : or try this once if all fails to reset the pass..http://obieetricks.blogspot.com/2009/08/obiee-tips-tricks-for-ease-in.html >
Like to try it but afraid get things more confused before I understand what is going on. I have not loss my Administrator password, I can login offline, I can login to SH Answerers pages.
Is offline suppose to have the same password as online?

Temporary error "A Crystal Reports job failed because a free license ..."

Hi all,
We coded with VS 2003 a .NET 1.1 application which using the Crystal Report 9 Redistribution package .NET ready to display reports from measured data from our device. The data is stored in a SQL Server 2000 MSDE. Crystal Report has his own DB connection to the SQL server to read the data to display the report.
Our application runs well on approx. 100 distributed installations. But on six customers installation we get this error. Actual on two customers PCs using the same DB we get the error "A Crystal Reports job failed because a free license could not be obtained in the time allocated.". This error pop up every time, when the report is shown. Although the report get shown completely.
I observed in the 'Windows Event Viewer => "System" log after the above-mentioned error following entry "Crystal Report job was delayed 2 (sec)." once for every time when the user requested a report.
I restored an empty DB on customers PC and the error don't pop up anymore.
All CR .NET assemblies have the version 9.2.3300.0. I tested also the "CrystalReportNET_keycodefix.zip", but it doesn't help. I had checked for hours all the issues about this error message on the internet. I tested the most fitting solutions, but not one fix the problem.
I tested customers full DB on my Virtual Machine with same installation, but I don't get the error.
Cheers
Ronny

Hi Ludek 
 
Thanks for your answer. I checked all the things you asked me to do on both system. 
 
Here are the results from my investigations: 
 
1) The keycode.dll was not on the not working PC. 
I copied it to the root of C: as on the working PC. I registered it with regsvr32.exe and tested the issue. 
=> The problem still exist. 
 
 
 
2) I compared the keycode on both system: 
HKLM\SOFTWARE\Crystal Decisions\9.0\Crystal Reports\Keycodes\CR Ent 
 
non working PC: 
1 AAP50-GS00000-U7000RN 131203342 3979604006 
The code is different in comparison to the working PC, because I carried out the 'CrystalReportNET_keycodefix.zip'. Before this I made an export of the above registry key. Afterwards I wasn't able to merge this export (backup) again with the registry. I assume due to the included carriage returns in the keycode. 
 
working PC 
1 XXXXX 
 
 
 
3) I used the Process Monitor and got following error during the error sequence: 
 
I list only some key entries from the hundreds of error entries. Please inform me, how I can provide you the full logger files. 
 
non working PC: 
WriteFile C:\...\Administrator.QCNIR002\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKLM\Software\Policies\Microsoft\Windows NT\DnsClient NAME NOT FOUND 
 
But I observed beside the results: No more entries, Name not found, Fast IO Disallowed, Buffer overflow (RegQueryKey) and Range not locked (UnlockFileSingle of printer driver) no other errors. 
 
 
working PC 
Operation: Path: Result: 
WriteFile C:\...\Administrator\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
 
 
 
4) Service Packs 
We could only compare the file size of the Merge Module we used with the one you provided me in the above link. 
 
<table border=0 cellpadding=0 cellspacing=0>
<tr>
<td>file name</td>
<td>file size of used Merge Module</td>
<td>file size of SP1 Merge Module</td>
</tr>
<tr>
<td width=150>crnetruntime.msm</td>
<td width=100>4'764'672 Byte</td>
<td width=100>4'770'304 Byte</td>
</tr>
<tr>
<td>license.msm</td>
<td>578'048 Byte</td>
<td>578'048 Byte</td>
</tr>
<tr>
<td>reportengine.msm</td>
<td>10'701'824 Byte</td>
<td>10'905'088 Byte</td>
</tr>
</table>
 
But I tried to install SP7 on my PC and on customers PC, but I got following error after I accepted the license agreement in the setup.exe: titlebar of window 'Information', Msg: 'Failed to create Backup folder -110' and just a button 'OK'. I got into an infinit loop and I could only end the process: 'IKernel.exe'. 
Remark: I get the same error with SP5 and SP6. 
 
 
 
5) Modules - comparison of DLL's 
 
I cross checked all the DLL in Modules, which begin with CR and some other, because there were over 100 DLL's. 
 
<table x:str border=0 cellpadding=0 cellspacing=0 width=834 style='border-collapse:
collapse;table-layout:fixed;width:626pt'>
<col width=385 style='mso-width-source:userset;mso-width-alt:14080;width:289pt'>
<col width=179 style='mso-width-source:userset;mso-width-alt:6546;width:134pt'>
<col width=110 style='mso-width-source:userset;mso-width-alt:4022;width:83pt'>
<col width=80 span=2 style='width:60pt'>
<tr height=17 style='height:12.75pt'>
<td height=17 width=385 style='height:12.75pt;width:289pt'>CRHEAPALLOC.DLL</td>
<td width=179 style='width:134pt'>9.2.0.2</td>
<td width=110 style='width:83pt'>9.2.0.2</td>
<td width=80 style='width:60pt'></td>
<td width=80 style='width:60pt'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRPE32.DLL</td>
<td>9.2.3.1183</td>
<td>9.2.3.1183</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRQE.DLL</td>
<td>9.2.1.625</td>
<td>9.2.1.625</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRTOWORDS_EN.DLL</td>
<td>9.2.0.14</td>
<td>9.2.0.14</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.CRYSTALREPORTS.ENGINE.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTAPPSERVER.CLIENTDOC.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTSOURCE.DLL</td>
<td>9.3.9500.7</td>
<td>9.3.9500.7</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.SHARED.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.WINDOWS.FORMS.DLL</td>
<td>9.3.9500.12</td>
<td>9.3.9500.12</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALKEYCODELIB.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>keycode.dll</td>
<td>9.0.0.281</td>
<td>9.0.0.281</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCE.DLL</td>
<td>2.81.1135.0</td>
<td>2.81.1135.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCER.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADO15.DLL</td>
<td>2.81.1128.0</td>
<td>2.81.1128.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADRH15.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSCORLIB.DLL</td>
<td class=xl26>01/15/09 22:31:34</td>
<td class=xl26>7/7/08 13:39</td>
<td class=xl24></td>
<td class=xl25></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>sqlresld.dll</td>
<td>2000.80.382.0</td>
<td>2000.080.0382.00</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>crdb_ado.dll</td>
<td>9.2.1.542</td>
<td>9.2.1.542</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
</table>
 
Please specify the more detailed, if you mean the Crystal framework files or the .NET files. Could you give me please the location of the framework dlls and database client dlls like a folder name, so that I can check also all of them. 
 
I can provide you also the Module logger files, if you require them. 
 
 
I would appreciate your further help very much. 
 
Cheers 
 
Ronny
Edited by: Ronny S. on Jul 6, 2009 4:57 PM
Edited by: Ronny S. on Jul 6, 2009 5:02 PM
Edited by: Ronny S. on Jul 6, 2009 5:17 PM
Edited by: Ronny S. on Jul 8, 2009 11:44 AM
Edited by: David Hilton on Jul 15, 2009 11:04 AM
Removed private keycode.

User can't authenticate...auth-failed/windows workstation not allowed

Keep on running into an odd problem. I have some users logging in via soft vpn connection. Yesterday, they were able to log in without a problem. Today they are getting 01/31/2007 08:09:21
Authen failed
Windows workstation not allowed .. ..
Why can they authenticate 1 day and then be denied. This happened last week as well. The server adminstrator seemed to think it was a user setup issue and gave them another user account. Now as you can see above, the same thing has happened. I don't get it. Any help would be appreciated.

For ACS to perform Windows authentications we need to specifiy a workstation name.
In AD , the user should have access to all computers.
OR
A computer account named CISCO should exist.
All users that Windows will authenticate have permission to log in to the computer named CISCO.
ACS shows this error message only when the user tries to login from a work station he has no permission to log on.
If you are using ACS 4.1 this link will be useul.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_installation_guide_chapter09186a008070a63c.html#wp1041202

SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"

Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0

AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8

Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424

My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
solution.
I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
on the search server Search'
Information Event ID: 18456 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:06.000Z" />
<EventRecordID>491461</EventRecordID>
<Channel>Application</Channel>
<Computer>myserver.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>[CLIENT: <named pipe>]</Data>
<Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Two seconds earlier
Information Event ID 17137 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="16384">17137</EventID>
<Level>4</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:04.000Z" />
<EventRecordID>491460</EventRecordID>
<Channel>Application</Channel>
<Computer>mysever.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>ShareWebDb</Data>
<Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I get more 3760 errors than 2424's. However, the
2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
I've done a lot of
web research on Sharepoint Errors 3760 and
2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
to BackConnectionHostNames as per:
http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##ssee

Thank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
Issue:
=========
Receive event error 3760 and 6398 on SBS 2008
Cause:
==========
Issue was caused by incorrect Auto Close option for ShareWebDb database
Solution:
==========
1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
NOTE: You must run it as administrator to perform steps below.
2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
3. Expand Database node and right click the ShareWebDb then choose properties.
4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False.

In Portal Anonymous mode - Change password option not coming- login fails

Hi Experts,
We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
Appreciate your help in solving this issue. I hope many would have faced similar situation.
Thanks
Yusuf

Hi Yusuf.
Do you use a standard or custom login module for your application?
More likely the used login module does not have a logic that handles such scenario as a change of user's password.
In this case you need to implement a custom module with a required functionality.
Best regards,
Aliaksandr Zhukau

CUPC 8.6.3 login failed

I am running these versions of CUCM 8.6.2.10000-30, CUP 8.6.4.12900-2 and using CUPC 8.6.3.20802.
Fully AD integration and AD authentication. All userids and passwords are operational.
I keep getting login failed when I try to loginto Cisco Unified Personal Communicator in VOICE LAB ENVIRONMENT

Hi,
The following troubleshooting doc for CUPC should help
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#topic1
Please check the following sections:
Understanding the CUPC Boot-up Process
Cannot Log In to the CUPC When Troubleshooter Shows All Green
HTH
Manish

I created a second email account with a password but when I try to get mail for it and I put in password it says login failed. Why? and how do I fix it.

I created second email account ([email protected]) with a Password but when I try to get mail and enter password, it says "Sending of Password did not succeed. Mail server mail.comcast.net responded: login failed". What am I doing wrong?

Have you logged on to the webmail account using a browser and enabled either Pop or Imap forwarding for that email address?
Have you created a mail account in Thunderbird that uses the chosen webmail forwarding option?
Password - make sure caps lock is not switched - it must be the same password you use to access the webmail account.
check:
Tools > account Settings > Server Settings
username = full email address
Please post info:
In Thunderbird
Help > Troubleshooting information
click on 'copy text to clipboard'
paste info in this question
edit /remove all info on fonts and printers.

When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Crystal Layout login failed in workstation

Similar Messages

Maybe you are looking for