Crystal preview - A subscript must be between 1 and the size of the array..

Hi
I am getting the following error when I run Print Preview on the CR Sales Invoice:
"A subscript must be between 1 and the size of the array ........."
Any ideas?
Thanks
Ian

Thanks Gordon
However this is a fresh install and the default Crystal SI layout provided by SAP and I would have expected it to work.  It makes it seem like an installation problem.
Do you know where the *.rpt files as stored by SAP and where I could maybe get a new Crystal SI to test?
Thanks

Similar Messages

  • Day must be between 1 and last day of month

    Hi
    I have a master detail form for overtime entries.
    Master Block contain emp_no,name,month etc.
    Detail block contain a date field ,,from time, to time etc
    when i enter the date in detail block it defaults the month from Server date and i am getting the error "Day must be between 1 and last day of ...."
    The form is going to reside on server so i cant go for changing system date for that.
    THe work around i am trying is i have created a dummy item in detail block for Date(dd) entry and populating my original date field on the basis of it.
    so that i can get rid of last day validation of month.The datatype of dummy item is char
    my code is
    c_day varchar(2);
    c_month varchar(2);
    c_year varchar(4);
    d_date varchar(8);
    begin
    c_day := :DETAIL.dummy;
    c_month := to_char(:MASTER.month, 'mm');
    c_year := to_char(:master.month, 'yyyy');
    d_date := c_day||c_month||c_year;
    :DETAIL.ot_date := to_date(d_date,'ddmmyyyy');
    end;
    I am using post change trigger on my dummy item but i am getting ORA-01840 for that.I have tried several ways but it is giving different type of date errors for that.
    Any help is highly appreciated

    Dear try this
    SELECT RUN_NUM, CV AS MONTH_DATE
    FROM
    SELECT ROWNUM AS RUN_NUM,TO_DATE('01-' || 'SEP' || '-' || 2007 ,'DD/MM/YYYY')+ (ROWNUM-1) CV
    FROM
    (SELECT 1 FROM DUAL GROUP BY CUBE (1,1,1,1,1)) A
    WHERE TO_CHAR(CV,'MON-YYYY') = 'SEP-2007'

  • Regarding the error ORA-01841: (full) year must be between -4713 and +9999,

    The issue is the code is not inserting the good records into the MIE table. This is becasue of the error 'OtherError GFSTM_INS_SNURK_NEW_TABLES_PA.gfstm_ins_asn_journal_pr:ORA-01841: (full) year must be between -4713 and +9999, and not be 0' This error is throwing out because of space issue in dt_asn_shipped.
    My requirement is to log error if any if not get the next record in the loop and insert it in the table if it has no error. The issue is good records are not getting inserted. The snurk_cmms_crct018_asn_journl in the cursor is a synonym which uses dblionk to connect to the remote db. The dt_asn_shipped data type is char(6) and the format is YYMMDD.
    declare
    CURSOR cur_asn_journal IS
    SELECT NVL(TRIM(cd_asn_plant),' ') cd_asn_plant,
         NVL(TRIM(no_journal),0) no_journal,
    NVL(TRIM(cd_ship_from),' ') cd_ship_from,
         TRIM(no_asn) no_asn,
    DECODE(LENGTH(dt_asn_shipped),6, to_date(to_char(to_date(trim(dt_asn_shipped),'YYMMDD'),
    'DD-MON-YY'),'DD-MON-YY'), '') dt_asn_shipped,
    TRIM(dt_processed) dt_processed,
    TRIM(in_manual) in_manual,
         TRIM(ts_last_update) ts_last_update     
    FROM snurk_cmms_crct018_asn_journl;
    BEGIN
    FOR l_rec_asn_journal IN cur_asn_journal LOOP
    BEGIN
    INSERT INTO gfstmie_st_cmms_asn_journal
    gsdb_site_code ,
    journal_num,
    gsdb_site_from_code,
    adv_shipping_notice_cnum,
    adv_sn_shipping_date,
    processed_date,
    manual_in_code,
    cmms_last_update_cdate,
    create_userid,
    create_dts,
    update_userid,
    update_dts
    ) VALUES
    l_rec_asn_journal.cd_asn_plant,
    l_rec_asn_journal.no_journal,
    l_rec_asn_journal.cd_ship_from,
    l_rec_asn_journal.no_asn,
    l_rec_asn_journal.dt_asn_shipped,
    l_rec_asn_journal.dt_processed,
    l_rec_asn_journal.in_manual,
    l_rec_asn_journal.ts_last_update,
    g_con_user_id,
         l_dts_current_gmt,
    g_con_user_id,
    l_dts_current_gmt
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line('l_num_exception_pt_7');
    --To assign value to error attributes
    l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
    SQLERRM || l_str_process_track,
    g_con_package_name || l_con_proc_name,
    g_con_string_null);
    l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
    l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;           
    l_rec_apm_error_attributes.module_code := l_con_module_code;
    l_rec_apm_error_attributes.notes_text := l_str_email_body;
    l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_invalid_date;
    --Calling procedure to log and notify subscribers of transaction
    --related errors and informational messages
    GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
    SUBSTR(l_str_email_body,1,2000),
    g_con_string_null,
    g_con_string_null,
    SUBSTR(l_str_email_body,1,2000),
    l_rec_apm_error_attributes,
    g_con_string_null,
    l_num_wait_time,
    l_num_wait_interval_time,
    l_str_msg_action_code,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    END;
    END LOOP;
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_12');
    DBMS_OUTPUT.PUT_LINE('l_num_exception_pt_2 '||l_str_procg_mode_code);
    --Rollback uncommitted transactions
    ROLLBACK;
    --Assigning failure status
    o_num_status := g_con_status_failure;
    --Assigning procedure end time in GMT
    l_dts_end_time := GFSTU_DATETIME_UTILITIES_PA.gfstu_to_gmt_fn;
    --To assign value to error attributes
    l_str_email_body := GFSTU_MSG_CONTEXT_STACKER_PA.gfstu_add_msg_context_fn(
    SQLERRM || l_str_process_track,
    g_con_package_name || l_con_proc_name,
    g_con_string_null);
    l_rec_apm_error_attributes.job_run_sakey := l_num_job_run_id;
    l_rec_apm_error_attributes.proj_acronym_code := GFSTM_PARM_SPECIFICATION_PA.g_con_proj_acronym_code_ta;           
    l_rec_apm_error_attributes.module_code := l_con_module_code;
    l_rec_apm_error_attributes.notes_text := l_str_email_body;
    l_rec_apm_error_attributes.msg_id := GFSTM_PARM_SPECIFICATION_PA.g_con_msg_id_oracle;
    --Calling procedure to log and notify subscribers of transaction
    --related errors and informational messages
    GFSTM_COMMON_UTL_PA.gfstm_log_message_pr(
    SUBSTR(l_str_email_body,1,2000),
    g_con_string_null,
    g_con_string_null,
    SUBSTR(l_str_email_body,1,2000),
    l_rec_apm_error_attributes,
    g_con_string_null,
    l_num_wait_time,
    l_num_wait_interval_time,
    l_str_msg_action_code,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    --Calling procedure to update the job status
    GFSTM_COMMON_UTL_PA.gfstm_update_job_status_pr(
    l_num_job_run_id,
    GFSTM_PARM_SPECIFICATION_PA.g_con_process_abort,
    l_dts_end_time,
    g_con_perf_metric_code,
    g_con_zero,
    g_con_n,
    l_num_oracle_error_code,
    l_str_oracle_msg,
    l_num_return_code,
    l_num_status);
    END ;
    Thanks,
    Vinodh

    Hi,
    Could you not have reduced your question to what is relevant?
    You seem to be saying that this is your problem:
    SELECT DECODE ( LENGTH (dt_asn_shipped),
              6,
              TO_DATE ( TO_CHAR ( TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD'), 'DD-MON-YY'), 'DD-MON-YY'),
             dt_asn_shipped
    FROM   snurk_cmms_crct018_asn_journl;As far as I can see, problem might be that you decode on UNTRIMMED length.
    Also, you could get rid of some the to_date(to_char(to_date), which is nothing more than simply to_date()
    Try something like
    SELECT CASE LENGTH (TRIM (dt_asn_shipped))
             WHEN 6 THEN TO_DATE ( TRIM (dt_asn_shipped), 'YYMMDD')
           END
             dt_asn_shipped
    FROM   snurk_cmms_crct018_asn_journl;Regards
    Peter

  • Error ORA-01841: (full) year must be between -4713 and +9999, and not be 0

    Hi Experts,
    I seem to be getting the error "Error ORA-01841: (full) year must be between -4713 and +9999, and not be 0" when my dates are in the year 2000. Here's my SQL:
    DROP TABLE PER_ALL_ASSIGNMENTS_M_XTERN;
    create table PER_ALL_ASSIGNMENTS_M_XTERN(
    PERSON_NUMBER                    VARCHAR2(30 CHAR),
    ASSIGNMENT_NUMBER VARCHAR2(30 CHAR),
    EFFECTIVE_START_DATE                DATE,
    EFFECTIVE_END_DATE           DATE,
    EFFECTIVE_SEQUENCE           NUMBER(4),
    ASS_ATTRIBUTE_CATEGORY           VARCHAR2(30 CHAR),
    ASS_ATTRIBUTE1 VARCHAR2(150 CHAR),
    ASS_ATTRIBUTE_NUMBER20 NUMBER,
    ASS_ATTRIBUTE_DATE1 DATE,
    ASS_ATTRIBUTE_DATE2 DATE,
    ASS_ATTRIBUTE_DATE3 DATE,
    ASS_ATTRIBUTE_DATE4 DATE,
    ASS_ATTRIBUTE_DATE5 DATE,
    ASS_ATTRIBUTE_DATE6 DATE,
    ASS_ATTRIBUTE_DATE7 DATE,
    ASS_ATTRIBUTE_DATE8 DATE,
    ASS_ATTRIBUTE_DATE9 DATE,
    ASS_ATTRIBUTE_DATE10 DATE,
    ASS_ATTRIBUTE_DATE11 DATE,
    ASS_ATTRIBUTE_DATE12 DATE,
    ASS_ATTRIBUTE_DATE13 DATE,
    ASS_ATTRIBUTE_DATE14 DATE,
    ASS_ATTRIBUTE_DATE15 DATE,
    ASG_INFORMATION_CATEGORY           VARCHAR2(30 CHAR),
    ASG_INFORMATION1 VARCHAR2(150 CHAR),
    ASG_INFORMATION_NUMBER20 NUMBER,
    ASG_INFORMATION_DATE1 DATE,
    ASG_INFORMATION_DATE2 DATE,
    ASG_INFORMATION_DATE3 DATE,
    ASG_INFORMATION_DATE4 DATE,
    ASG_INFORMATION_DATE5 DATE,
    ASG_INFORMATION_DATE6 DATE,
    ASG_INFORMATION_DATE7 DATE,
    ASG_INFORMATION_DATE8 DATE,
    ASG_INFORMATION_DATE9 DATE,
    ASG_INFORMATION_DATE10 DATE,
    ASG_INFORMATION_DATE11 DATE,
    ASG_INFORMATION_DATE12 DATE,
    ASG_INFORMATION_DATE13 DATE,
    ASG_INFORMATION_DATE14 DATE,
    ASG_INFORMATION_DATE15 DATE
    organization external
    ( default directory APPLCP_FILE_DIR
    access parameters
    ( records delimited by newline skip 1
         badfile APPLCP_FILE_DIR:'PER_ALL_ASSIGNMENTS_M_XTERN.bad'
    logfile APPLCP_FILE_DIR:'PER_ALL_ASSIGNMENTS_M_XTERN.log'
    fields terminated by ',' OPTIONALLY ENCLOSED BY '"'
    (PERSON_NUMBER,     
    ASSIGNMENT_NUMBER,
    EFFECTIVE_START_DATE CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    EFFECTIVE_END_DATE CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    EFFECTIVE_SEQUENCE,
    ASS_ATTRIBUTE_CATEGORY,
    ASS_ATTRIBUTE1,
    ASS_ATTRIBUTE_NUMBER20,
    ASS_ATTRIBUTE_DATE1 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE2 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE3 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE4 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE5 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE6 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE7 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE8 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE9 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE10 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE11 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE12 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE13 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE14 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASS_ATTRIBUTE_DATE15 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_CATEGORY,
    ASG_INFORMATION1,
    ASG_INFORMATION_NUMBER20,
    ASG_INFORMATION_DATE1 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE2 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE3 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE4 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE5 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE6 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE7 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE8 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE9 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE10 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE11 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE12 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE13 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE14 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY",
    ASG_INFORMATION_DATE15 CHAR(20) DATE_FORMAT DATE MASK "DD-MON-YYYY"
    location ('PER_ALL_ASSIGNMENTS_M.csv')
    REJECT LIMIT UNLIMITED;
    ...and getting errors when data looks like the following:
    E040101,EE040101,*1-Aug-2000*,31-Dec-4712,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040101,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,31113,31113,31113,31113,31113,31113,,,1-Jan-2012,31-Dec-2012,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    ...error message:
    error processing column EFFECTIVE_START_DATE in row 19 for datafile /u05/dbadir/jmf/incident_logs/PER_ALL_ASSIGNMENTS_M.csv
    ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    Thanks,
    Thai

    Here is a snippet of the bad file data:
    E040110,EE040110,01-Aug-00,31-Dec-12,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040110,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,27667.2,27667.2,27667.2,27667.2,27667.2,27667.2,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E040100,EE040100,01-May-00,31-Dec-12,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040100,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,31113,31113,31113,31113,31113,31113,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E040101,EE040101,01-Aug-00,31-Dec-12,1,,NDVC,YES,DE,SFC,N,STIP Plan - Pressure,,,,,,,E040101,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,5,,,,,,,,,,,,31113,31113,31113,31113,31113,31113,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E000916,EE000916,01-Oct-00,31-Dec-12,1,,NDVC,YES,NL,SFC-Commercial,E,SIP Plan - Control Technologies,,,,,,,E000916,21000000,555000,99000,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,10,,,,,,,,,,,,34905.65,34905.65,34905.65,34905.65,34905.65,34905.65,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E000807,EE000807,03-Jan-00,31-Dec-12,1,,NDVC,YES,FR,SFC-Commercial,E,STIP Plan - Cross BU,,,,,,,E000807,,,,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,3,,,,,,,,,,,,35448.56,35448.56,35448.56,35448.56,35448.56,35448.56,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    E000851,EE000851,25-Apr-00,31-Dec-12,1,,NDVC,YES,FR,SFC-Commercial,E,SIP Plan - Control Technologies,,,,,,,E000851,21000000,555000,99000,2080,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,13,,,,,,,,,,,,43283.76,43283.76,43283.76,43283.76,43283.76,43283.76,,,01-Jan-12,31-Dec-12,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    So, the successfully loaded data is being loaded where year=2003 in the CSV as year=0003. Even though the data is loaded fine the data is not correct. For some reason the external table is set to have the year truncated.

  • ORA-1850: hor must be between 0 and 23 error

    Hi All
    i have the following table for creating and inserting i included only two fileds as these are the fields that i'm getting errors on.
    WITH     sample_data     AS
         SELECT     '50709' AS start_date, '2400' AS start_time  FROM dual     UNION ALL
         SELECT     '082510',              '0000'                  FROM dual
    SELECT       *
    FROM       sample_data
    ;DATA:
    START_DATE     START_TIME
    50709                        2400
    082510                        0000And now when i run the query against the table:
    SELECT   direction, car_count_pos, truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)) AS adjusted, car_count_neg,
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)) AS adjusted_neg,
             TO_DATE (start_date, 'MMDDYY') AS start_date,
             TO_DATE (end_date, 'MMDDYY') AS end_date,
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
                   ) AS start_time,
             start_time,
             (TO_DATE (end_date, 'MMDDYY') - TO_DATE (start_date, 'MMDDYY')
             ) AS days
        FROM (SELECT   (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_pos,
                       t1.direction,
                       (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_pos,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_neg,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_neg,
                       t2.start_date, t2.start_time, t2.end_date, t2.end_time
                  FROM bin_data t1, traffic_sample t2
                 WHERE t1.traffic_sample_id = t2.traffic_sample_id
              GROUP BY t1.direction,
                       t2.start_date,
                       t2.start_time,
                       t2.end_date,
                       t2.end_time)
       WHERE direction IN ('1', '3')
    GROUP BY TO_DATE (start_date, 'MMDDYY'),
             direction,
             car_count_pos,
             truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)),
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)),
             TO_DATE (end_date, 'MMDDYY'),
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
             start_time,
             car_count_negI'm getting the error
    ORA-1850: Hour must be between 0 and 23
    But as you see there is a value 2400 in the table is there any way to get around this? please need help.
    Thanks
    Edited by: thinkingeye on Aug 26, 2010 8:42 AM

    Thanks AP but i came up with something different which i guess sserved the same purpose i used the DECODE fucntion in the INNER query.
    SELECT   direction, car_count_pos, truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)) AS adjusted, car_count_neg,
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)) AS adjusted_neg,
             TO_DATE (start_date, 'MMDDYY') AS start_date,
             TO_DATE (end_date, 'MMDDYY') AS end_date,
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
                   ) AS start_time,
                   ROUND (TO_CHAR (TO_DATE (LPAD (end_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
                   ) AS end_time,
             start_time,
             (TO_DATE (end_date, 'MMDDYY') - TO_DATE (start_date, 'MMDDYY')
             ) AS days,
             CITY,COUNTY,LOCATION,ROUTE_NBR,ROUTE_TYPE
        FROM (SELECT   (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_pos,
                       t1.direction,
                       (CASE
                           WHEN t1.direction = '1'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_pos,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_1_data)
                                    + COUNT (t1.bin_2_data)
                                    + COUNT (t1.bin_3_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS car_count_neg,
                       (CASE
                           WHEN t1.direction = '3'
                              THEN (  COUNT (t1.bin_4_data)
                                    + COUNT (t1.bin_5_data)
                                    + COUNT (t1.bin_6_data)
                                    + COUNT (t1.bin_7_data)
                                    + COUNT (t1.bin_8_data)
                                    + COUNT (t1.bin_9_data)
                                    + COUNT (t1.bin_10_data)
                                    + COUNT (t1.bin_11_data)
                                    + COUNT (t1.bin_12_data)
                                    + COUNT (t1.bin_13_data)
                                    + COUNT (t1.bin_14_data)
                                    + COUNT (t1.bin_15_data) * 0.981 * 1.019
                           ELSE NULL
                        END
                       ) AS truck_count_neg,
                       t2.start_date, t2.start_time, t2.end_date,*decode(t2.END_TIME,2400,'2359',t2.end_time) as end_time*,t3.CITY, t3.COUNTY,t3.LOCATION,t3.ROUTE_NBR, t3.ROUTE_TYPE
                  FROM bin_data t1, traffic_sample t2,location_details t3
                 WHERE t1.traffic_sample_id = t2.traffic_sample_id
                 and t2.TRAFFIC_SAMPLE_ID=t3.TRAFFIC_SAMPLE_ID
              GROUP BY t1.direction,
                       t2.start_date,
                       t2.start_time,
                       t2.end_date,
                       t2.end_time,
                       t3.CITY, t3.COUNTY,t3.LOCATION,t3.ROUTE_NBR, t3.ROUTE_TYPE)
       WHERE direction IN ('1', '3')
    GROUP BY TO_DATE (start_date, 'MMDDYY'),
             direction,
             car_count_pos,
             truck_count_pos,
             (car_count_pos + 2 * (truck_count_pos)),
             truck_count_neg,
             (car_count_neg + 2 * (truck_count_neg)),
             TO_DATE (end_date, 'MMDDYY'),
             ROUND (TO_CHAR (TO_DATE (LPAD (start_time, 4, '0'), 'HH24MI'),
                             'HH24.MI'
             start_time,
             car_count_neg,
             end_time,
             CITY,COUNTY,LOCATION,ROUTE_NBR,ROUTE_TYPE

  • Error: ORA-01847: day of month must be between 1 and last day of month

    Hi,
    I am getting this ORA-01847: day of month must be between 1 and last day of month type of error but I have checked my data all are correct.
    I am inserting the data in the merge query. It is giving the above error.
    but when i insert the data like that
    insert into dt(start_date) select TO_DATE (tariff_start_date, 'DD/MM/RRRR') from ext_zpp0a871;
    It does not give any error.
    Please find the below code
    DECLARE
    l_sv_error_msg VARCHAR2 (1000);
    BEGIN
    FOR i IN (SELECT condition_type, sales_org, division_channel, division,
    price_list, ean_upc, amount, unit_of_measure1,
    tariff_start_date, tariff_end_date
    FROM ext_zpp0a871--This is external table
    WHERE condition_type = 'ZPP0' AND ROWNUM < 200)
    LOOP
    BEGIN
    MERGE INTO sap_tariff st
    USING (SELECT i.price_list pl, i.ean_upc upc,
    TO_DATE (i.tariff_start_date, 'DD/MM/RRRR') tsd,
    TO_DATE (i.tariff_end_date, 'DD/MM/RRRR') ted
    FROM DUAL) du
    ON (st.prod_ean_cuni = du.upc
    AND st.pricelist = du.pl
    AND st.tariff_start_date = du.tsd
    AND st.tariff_end_date = du.ted)
    WHEN MATCHED THEN
    UPDATE
    SET st.condition_type = i.condition_type,
    st.sales_org = i.sales_org,
    st.division_channel = i.division_channel,
    st.division = i.division,
    st.amount =
    TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
    st.uom = i.unit_of_measure1
    WHEN NOT MATCHED THEN
    INSERT (condition_type, sales_org, division_channel, division,
    pricelist, prod_ean_cuni, amount, uom,
    tariff_start_date, tariff_end_date)
    VALUES (i.condition_type, i.sales_org, i.division_channel,
    i.division, i.price_list, i.ean_upc,
    TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
    i.unit_of_measure1,
    TO_DATE (i.tariff_start_date, 'DD/MM/RRRR'),
    TO_DATE (i.tariff_end_date, 'DD/MM/RRRR'));
    /*INSERT INTO sap_tariff
    (condition_type, sales_org, division_channel,
    division, pricelist, prod_ean_cuni,
    amount,
    uom,
    tariff_start_date,
    tariff_end_date
    VALUES (i.condition_type, i.sales_org, i.division_channel,
    i.division, i.price_list, i.ean_upc,
    TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
    i.unit_of_measure1,
    TO_DATE (i.tariff_start_date, 'DD/MM/RRRR'),
    TO_DATE (i.tariff_end_date, 'DD/MM/RRRR')
    EXCEPTION
    WHEN DUP_VAL_ON_INDEX
    THEN
    UPDATE sap_tariff
    SET condition_type = i.condition_type,
    sales_org = i.sales_org,
    division_channel = i.division_channel,
    division = i.division,
    amount =
    TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
    uom = i.unit_of_measure1;
    WHEN OTHERS
    THEN
    l_sv_error_msg := SQLERRM (SQLCODE);
    INSERT INTO sap_tariff_log
    (date_of_load, condition_type, sales_org,
    division_channel, division, price_list,
    prod_ean_cuni, amount, uom,
    tariff_start_date, tariff_end_date,
    rejection_reason
    VALUES (SYSDATE, i.condition_type, i.sales_org,
    i.division_channel, i.division, i.price_list,
    i.ean_upc, i.amount, i.unit_of_measure1,
    i.tariff_start_date, i.tariff_end_date,
    l_sv_error_msg
    END;
    END LOOP;
    COMMIT;
    EXCEPTION
    WHEN OTHERS
    THEN
    l_sv_error_msg := SQLERRM (SQLCODE);
    neo_pro_log ('Others Error', l_sv_error_msg);
    END;

    user13400510 wrote:
    but when i insert the data like that
    insert into dt(start_date) select TO_DATE (tariff_start_date, 'DD/MM/RRRR') from ext_zpp0a871;
    It does not give any error.Maybe the error is on tariff_end_date instead of tariff_start_date ?
    What are the datatypes of tariff_start_date and tariff_end_date ? If they are already dates, and you to_date them (and depending on what your nls_date_xxxxx params are) you can have such errors :SQL> sho parameter nls_date_format
    NAME_COL_PLUS_SHOW_PARAM                 TYPE        VALUE_COL_PLUS_SHOW_PARAM
    nls_date_format                          string      DD/MM/YYYY
    SQL> select to_date(sysdate,'Day dd Mon RRRR') from dual;
    select to_date(sysdate,'Day dd Mon RRRR') from dual
    ERROR at line 1:
    ORA-01846: not a valid day of the week
    SQL> select to_date(sysdate,'hh24:mi:ss dd/mm/rrrr') from dual;
    select to_date(sysdate,'hh24:mi:ss dd/mm/rrrr') from dual
    ERROR at line 1:
    ORA-01850: hour must be between 0 and 23

  • ORA-01847: day of month must be between 1 and last day of month error

    Hi All
    When i run the following code i'm getting the error:ORA-01847: day of month must be between 1 and last day of month error
    SELECT t2.owner_cat,
    t1.owner_id,
    stock_id,
    Sum(received_amount) received_amount,
    Sum(curr_amount) curr_amount,
    Sum(used_amount) used_amount,
    To_char(Add_months(date_work,6),'YYYY') date_work
    FROM (SELECT owner_id_to owner_id,
    stock_id_to stock_id,
    Sum(full_amount) received_amount,
    0 curr_amount,
    0 used_amount,
    To_char(0) date_work
    FROM dw_wms_mat_transfer
    WHERE master_code_id IN ('8664','8665')
    GROUP BY owner_id_to,
    stock_id_to
    UNION ALL
    SELECT owner_id,
    stock_id,
    0 received_amount,
    Sum(curr_amount) curr_amount,
    0 used_amount,
    To_char(0) date_work
    FROM dw_wms_mat_inv
    WHERE master_code_id IN ('8664','8665')
    GROUP BY owner_id,
    stock_id
    UNION ALL
    SELECT t2.owner_id,
    t1.stock_id,
    0 received_amt,
    0 curr_amt,
    Sum(amount) used_amt,
    To_char(Add_months(date_work,6),'YYYY') date_work
    FROM dw_wms_wo_mat_dc t1,
    (SELECT owner_id,
    stock_id
    FROM dw_wms_mat_inv
    WHERE master_code_id IN ('8664','8665')
    GROUP BY owner_id,
    stock_id) t2
    WHERE t1.stock_id = t2.stock_id
    GROUP BY t2.owner_id,
    t1.stock_id,
    To_char(Add_months(date_work,6),'YYYY')) t1,
    dw_wms_setup_owner t2
    WHERE t1.owner_id = t2.owner_id
    GROUP BY t2.owner_cat,
    t1.owner_id,
    stock_id,
    To_char(Add_months(date_work,6),'YYYY')
    But when i just run the inner query:
    (SELECT owner_id_to owner_id,
    stock_id_to stock_id,
    Sum(full_amount) received_amount,
    0 curr_amount,
    0 used_amount,
    To_char(0) date_work
    FROM dw_wms_mat_transfer
    WHERE master_code_id IN ('8664','8665')
    GROUP BY owner_id_to,
    stock_id_to
    UNION ALL
    SELECT owner_id,
    stock_id,
    0 received_amount,
    Sum(curr_amount) curr_amount,
    0 used_amount,
    To_char(0) date_work
    FROM dw_wms_mat_inv
    WHERE master_code_id IN ('8664','8665')
    GROUP BY owner_id,
    stock_id
    UNION ALL
    SELECT t2.owner_id,
    t1.stock_id,
    0 received_amt,
    0 curr_amt,
    Sum(amount) used_amt,
    To_char(Add_months(date_work,6),'YYYY') date_work
    FROM dw_wms_wo_mat_dc t1,
    (SELECT owner_id,
    stock_id
    FROM dw_wms_mat_inv
    WHERE master_code_id IN ('8664','8665')
    GROUP BY owner_id,
    stock_id) t2
    WHERE t1.stock_id = t2.stock_id
    GROUP BY t2.owner_id,
    t1.stock_id,
    To_char(Add_months(date_work,6),'YYYY'))
    I'm not getting that error, any help please?

    Hi,
    Like Anuraq already explained, you need to keep in mind that when you apply a to_char, you've turned your DATE datatype into a STRING and by doing that you've lost the ability to use the add_months function again in your outer query.
    Using a simplified example, extracted from your example:
    MHO%xe> select to_char(add_months(date_work, 6), 'yyyy') date_work
      2  from ( select to_char(0) date_work
      3         from dual
      4         union all
      5         select to_char(0) date_work
      6         from dual
      7         union all
      8         select to_char(add_months(sysdate, 6), 'yyyy') date_work
      9         from dual
    10       );
    select to_char(add_months(date_work, 6), 'yyyy') date_work
    FOUT in regel 1:
    .ORA-01847: day of month must be between 1 and last day of monthHowever, you should either do something like:
    MHO%xe> select nvl(to_char(add_months(date_work, 12), 'yyyy'), '0') date_work
      2  from ( select to_date(null) date_work
      3         from dual
      4         union all
      5         select to_date(null) date_work
      6         from dual
      7         union all
      8         select sysdate date_work
      9         from dual
    10       );
    DATE
    0
    0
    2010or (less clear, more confusing):
    MHO%xe> select nvl(to_char(add_months(date_work, 6), 'yyyy'), '0') date_work
      2  from ( select to_date(null) date_work
      3         from dual
      4         union all
      5         select to_date(null) date_work
      6         from dual
      7         union all
      8         select add_months(sysdate, 6) date_work
      9         from dual
    10       );
    DATE
    0
    0
    2010It's not clear to me why you're using add_months twice (inner + outer query) in your original example.
    As you can see you can get the same results using it only once in your outer query.

  • Frm-50004: day must be between 1 and last of month.

    frm-50004: day must be between 1 and last of month.
    hi dear all,
    I HAVE A TEXTITEM OF DATATYPE DATE. ITS FORMAT MASK IS 'HH24-MI-SS AM' BUT
    WHEN I TRY TO INSERT IT GIVES THE FOLLOWING ERROR:
    FRM-50004: Day must be between 1 and last of month.
    thanks
    Muhammad Nadeem
    Mardan (Pakistan)
    [email protected]

    I don't think you are getting that error message from that date item. Oracle defaults the month to current month, day to 01, and year to current year when they aren't entered in a date.
    However, you cannot use 'HH24' with the 'AM' meridian indicator, so that format mask is illegal, and SHOULD generate a different error message.
    And last, if you want Forms to carry the time in a date field, you MUST set the datatype to datetime.

  • ORA-01850: hour must be between 0 and 23

    Hi techies,
    We have created a procedure for our daily report.its running fine for two location.when we run for a location we end up with this error.our current NLS_DATE_FORMAT is HH24:MI:SS.but its running successfully when we set nls_date_format='DD-MON-YY'.whereas other two (Which is same except a table from where it fetch data thru dblink) running properly with NLS_DATE_FORMAT is HH24:MI:SS.
    ORA-01850: hour must be between 0 and 23
    ORA-02063: preceding line from DW_TO_DIRC.NACALOGISTICS.COM
    ORA-06512: at "OTSLGWEB.DAILY_JOB_PROFIT_REPORT_USA", line 89
    ORA-06512: at line 1

    Hi Techie,
    Apologies for my vague post.
    Here it would be clear.
    My database NLS_DATE_FORMAT='HH24:MI:SS'
    We have three procedure one is for AUSTRALIA,NEW ZEALAND and USA for daily report.all three are SAME CODE except a view whice is used inside the procedure from where these procedures get data thru dblink and create table in local database.
    when i execute procdure for AUSTRALI AND NEW ZEALAND it was successfull whereas when i execute for USA it was failing with the error i above mentioned.
    if I set
    alter session set nls_date_format='DD-MON-YY';
    and execute the USA Procedure it was successfully completing.
    My question here is..
    1.What was the real cause of this error?
    2.if NLS settings are wrong.how the same code of AUSTRALIA AND NEW ZEALAND is successfull?
    3.Can we add 'alter session set NLS_DATE_FORMAT='DD-MON-YY' inside the procedure? (We do not have approval to change this in DB level so we intend to add it in session level)
    4.is it caused due to data?
    Cheers
    Sameer Ameen

  • Hour must be between 1 and 12

    UPDATE ATTENDENCE SET OUTTIME=TO_TIMESTAMP('" + attendence.getLeaveTime() + "','HH:MI AM') WHERE EMPID='" + attendence.getEmpID() + "' AND ATTENDENCEDATE=to_date('" + attendence.getDate() + "','YYYY-MM-DD')
    attendence.getLeaveTime's return type is Time Stamp. I got error "hour must be between 1 and 12". I passed time stamp like this. setLeaveTime(new Timestamp(inTime.getTime()))
    Edited by: 993001 on Mar 24, 2013 9:47 AM

    CREATE TABLE "ELAMOR"."ATTENDENCE"
    (     "ATTENDENCEID" VARCHAR2(20 BYTE) NOT NULL ENABLE,
         "INTIME" TIMESTAMP (6) NOT NULL ENABLE,
         "OUTTIME" TIMESTAMP (6) NOT NULL ENABLE,
         "EMPID" VARCHAR2(20 BYTE) NOT NULL ENABLE,
         "ATTENDENCEDATE" DATE,
         CONSTRAINT "ATTENDENCE_PK" PRIMARY KEY ("ATTENDENCEID")
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
    TABLESPACE "USERS" ENABLE,
         CONSTRAINT "ATTENDENCE_EMPLOYEE_FK1" FOREIGN KEY ("EMPID")
         REFERENCES "ELAMOR"."EMPLOYEE" ("EMPID") ON DELETE CASCADE ENABLE
    ) SEGMENT CREATION IMMEDIATE
    PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
    TABLESPACE "USERS" ;

  • Object name must have between 000003 and 000009 characters

    Hi BW Experts,
    When I am trying to create a cube I am getting the below error message:
    Object name Z0FIGL_01 must have between 000003 and 000009 characters. Message no. R7112
    It would be great if some one can help me to resolve the issue...
    Regards,
    Reddy

    Hi
    The infocube technical name must be in between 3 to 9 characteristics length
    i.e,Min 3 Char & Max 9 Char
    is ZOFIGL_01 is ur object name ?its defined within limits,need to verify:)
    hope this helps
    Sriman
    Edited by: Sreeman on Apr 11, 2008 9:34 PM

  • I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

    I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

    iWeb cannot import published files so you would need rebuild the site.
    Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html
    If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

  • I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone

    I have an iMac with 10.9.1 and an iPhone 5 also updated to the newest system and I cannot get a sync set up between Ical and the iPhone or Outlook 2011 mac calendar with the iphone. I would perfer using outlook but will settle for the Imac calendar

    It depends on what iMac you have. If it is an old PPC (G4 orG5) iMac then no further upgrades are possible. If it an Intel iMac:
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    (NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes.
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Need to remove the space between Menu and the Inner screen

    Hi
    I am using forms 10G.
    In my screen there is some space is coming in between menu and the inner screen and also same in the left side as well .
    So can any one tell me which parameter I need to change so that the inner screen should display just below to the menu and same for the left side as well ?

    Hi
    Yes , If I change that then it is woring fine .
    But my question is :- I have 10 forms in server , and in 2 forms I have changed some functionalty then I have FTP it to server .
    Now all the forms are coming with some spaces between menu and inner screen . This is what I am little confused .

  • Distance Between user and The kinect Device

    Hey all :)
    how to get the distance between user and the kinect ??
    i found a function but it's in kinect v1 
    public static double GetSkeletonDistance(this Skeleton skeleton)
                return (skeleton.Position.X * skeleton.Position.X) +
                       (skeleton.Position.Y * skeleton.Position.Y) +
                       (skeleton.Position.Z * skeleton.Position.Z);
    i don't know how to make it under kinect v2 ?

    Joint head = body.Joints[JointType.hipCentre];
    return head.Position.Z ;
    it always return 0 :/
    There is no hipCentre in Kinect v2 SDK. Have a look at
    JointType Enumeration. There you can see all the available JointTypes. I am using the
    SpineBase , because users may lean from time to time. So
    return body.Joints[JointType.SpineBase].Position.Z;
    should give you a nice distance. Keep in mind, that even the smallest changes will affect this value. So if you want to check for a distance, you might want to use a threshold or even joint accumulation.
    Best regards,
    Alex
    Edit: Please mark Brekel's answer as answer. Thanks.

Maybe you are looking for

  • ADDING CONTENTS ON A FIELD IN A INTERNAL TABLE

    HI , the requirement is like that: there is a internal table. i have to add the values of one particular field say Filed X and compare it with the value of another field y Could anybody please provide a sample code Regards, Sharad Narayan

  • [SOLVED] Laptop Lid Close

    I've been using arch on my laptop for a while now and have been having problems when I close the lid on my laptop. What I want my a laptop to do is nothing except simply turn the screen off when the lid is shut. However, at the moment when I close th

  • Weblogic 8.1 Enable Load Balancing with Node Manager

    Hi All, Please provide any guidelines on how to enable Load Balancing in Bea Weblogic 8.1 I have configured *1 Admin Server* with *4 Managed Servers* on a single machine each having different port. I want to setup load balancing such that any 1 of 4

  • Printer not printing after download Mavericks

    Why does my Canon MX860 printer no longer print after I downloaded Mavericks?

  • Problem with inserting images

    So I'm extremely new to DW but I've got the basics down. I've got my web server and a local folder which I sync to/from. Everything is working fine becides the images. When I upload an image to "/images" using Filezilla, and refresh the window in DW,