Crystal Report 2008 - File Locations

I'm running out of space on the OS partition (C drive) and want to change the default location(s) in Crystal Report so when reports are created and run,  they use space on the D drive.

Hello,
Not exactly clear what you want? Save your reports to your D drive would be my first guess.... If you are referring to the \temp folder then change your system Environment Variable from the default to d:\temp and also change the TMP to d:\Tmp.
You could even set your Swap file to d drive also. I suggest you contact your IT department or search Microsoft's site on how to optimize hard drive space when it's limited. PLEASE back up everything first before making changes to your swap file location, if you don't do it right you may not be able to start windows.
Thank you
Don

Similar Messages

  • Crystal Report 2008 File Open limit

    In Crystal Reports 2008 when selecting File > Open > Enterprise  The number of files listed in each directory looks to be limited to around 25 files.
    If I have a directory with more then that number of files, I have to move the file to another folder or rename it (using CMC) so it shows up in the first bunch of files if I want to open it.
    Is there a way to increase the number of files shown in the Enterprise window?
    Thanks

    Hello,
    Not exactly clear what you want? Save your reports to your D drive would be my first guess.... If you are referring to the \temp folder then change your system Environment Variable from the default to d:\temp and also change the TMP to d:\Tmp.
    You could even set your Swap file to d drive also. I suggest you contact your IT department or search Microsoft's site on how to optimize hard drive space when it's limited. PLEASE back up everything first before making changes to your swap file location, if you don't do it right you may not be able to start windows.
    Thank you
    Don

  • Crystal Reports 2008 - Error setting new datasource location

    Hi All,
    We are experiencing an issue while trying to set datasource location for our RM 3.0 reports in Crystal Reports 2008 designer. As per guide "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports" (step 11), after opening the desire report we go to DataBase-->Set DataSource Location and when selecting our RM system (which actually has the BI content addon installed on it), we got the following error message:
    "Some tables could not be replaced, as no match was found in the new data source. Please verify the table required for any unmodified tables"
    I'm new on this so I'm not sure if the table indicated in the original datasource should exist in my DB (new datasource) before doing this? If so, how those tables are imported or created in our DB?
    Could you please help me on this issue?
    Please let me know if any other detail or data is required.
    Regards

    Hi Don,
    Thanks for the update.
    Actually I've installed SAP Integration Kit and its Fixpack in both....BOE Server (which is the same as the SAP server) and in client pc.  In all cases we have select a typical installation which supposes the required drivers are available. Also I've followed Ingo's documentation to activate and publish standard Risk Management reports (RM reports). Everything works ok with them. We are able to access reports through the application.
    The issue appears when trying to customize one of these standard reports through CR Designer. For example if we select the "GRRM_Risk_by_Risk_Category" and try to customize it as indicated in the "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports"...the table behind this report (table GRFN_CY_API_GRRM_R1) it's not in our RM System. My main concern or question is regarding this....Did I miss something while importing transports files, activating or publishing RM reports, etc....and thatu2019s the reason why this (and any other) table is not already in my system? I was not able to find where those tables are supposed to be or how they should be imported in my system. The odd thing is...that we are trying to customize and set the new data source for these reports to the same system from where they are being opened. Put in this way...RM reports have been activated in system A (RM System) and published to system B (BOE System). While customizing reports through CR Designer...we are actually opening reports from system A. These reports have as their original data source...a demo SAP system info (uxcir1p.wdf.sap.corp) and when we want to update this data source with our RM system....the error appears. The whole process is explained in the above mentioned guide for your reference.
    Hope being clear enough..
    Thanks for your help

  • File not found error when Downloading Crystal Reports 2008

    Hi,
    I am trying to download a trial version of Crystal Reports 2008. I get the error "file not found" both times when I downloaded the zip file and opened it first from the Free trial link and next from the Diamond community page link.  Can anyone help pls. ? Thanks AC

    New location to download: http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • Crystal Reports 2008 crashes when previewing image with graphic location

    Hi,
    I'm using Crystal Reports 2008 for SAP Business One.  When I try to insert an image with a UNC graphic location (browse to a UNC drive for image) and I preview, Crystal Reports crashes with the following debug info:
    Problem signature:
      Problem Event Name:     APPCRASH
      Application Name:     crw32.exe
      Application Version:     12.1.0.892
      Application Timestamp:     48de4bbc
      Fault Module Name:     cslibu-3-0.dll
      Fault Module Version:     12.4.0.966
      Fault Module Timestamp:     4daed0a1
      Exception Code:     c0000094
      Exception Offset:     0002d7fd
      OS Version:     6.1.7601.2.1.0.272.7
      Locale ID:     1033
      Additional Information 1:     0a9e
      Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:     0a9e
      Additional Information 4:     0a9e372d3b4ad19135b953a78882e789
    Any idea why?  If I trun graphic location off, it works fine.
    The code I'm using to pull image is:
    sapserver\B1_SHR\Bitmaps\Versailles\" & {RSM_Inventory_Images;1.PicturName}
    Thanks.

    Through  Startu2014Run are you able to view the image by choosing the following path ?
    sapserver\B1_SHR\Bitmaps\Versailles\" & {RSM_Inventory_Images;1.PicturName}
    Also try to insert any image which is on your local hard drive and try.  I think this is because, CR is unable to access the images which are on UNC.
    Thanks,
    Sastry

  • From Crystal report XI R2 files to Crsytal Report 2008  files

    Hi All,
    Can I convert  from Crystal report XI R2 files to Crsytal Report 2008  files?
    Please let me know.
    Thanks,
    Manjunath N Jogin

    Hi,
    Here are a few more facts about up gradation to CR 2008.
    1)     Crystal Reports should be the same version of the Enterprise: for instance if reports are created with CR XI R2, the Enterprise version should be BOE XI R2; CR2008 will not be compatible with BOXI R2 Enterprise.
    2)     More versions of CR can be installed in the same machines; please note that the versions should be installed following the order from the oldest version to the latest one in order to avoid conflicts. For instance, you may install CR X first, then CR XI, then XI R2 and then CR 2008;
    3)     The reports created with CR XI can be opened with CR 2008.
    4)     And the reports created with CR 2008 can be opened with CR XI; however if the reports contain any features which are not available with the previous version, these may not be supported; For instance Flash objects which can be used with CR2008 would not be supported by CR XI R2.
    5)     The report definition defines the version with witch the report is created. The report definition information is available from u2018Reportu2019 menu/u2019Performance Informationu2019.
    Hope this would be helpful.
    Regards,
    Aditya Joshi

  • Unable to load password protected Accdb file using crystal reports 2008

    Hi,
    I am trying to generate crystal reports  using crystal reports 2008 and in the process, I am internally setting accdb file to all my rpt files .
    When i try to map my accdb file (Without passord protection) to all my rpt files, everything works fine and i am able to generate reports.
    But, when i try to map the password protected accdb file to the rpt file, it throws me an error saying
    "LogOn failed. "
    Details :         ADO Error Code : 0X
    Source:         Microsoft Access Database Engine
    Description : "Cannot start your appliaction, The workgroup information file is missing or exclusively opened by other users"
    SQL State  : 3028
    I have made sure that none of my applications are running when i try this.
    Please find the screenshot for the same.
    Please let me know how to resolve this issue as i need to work with password protected accdb files for generating reports.
    Thanks in Advance.
    Regards,
    Ramnath

    Hi Ludek,
    This is happening in CR designer.
    Besides, please find below the additional basic info regarding this
    Crystal reports version      : 2008
    Database connection type : OLE
    OLE DB Driver                    :  Microsoft Office 12.0 Access Database Engine OLE DB Provider
    Database                           :  Access 2010
    Dev Language                   :  VB.Net
    Regards,
    Ramnath

  • Crystal Reports 2008 - Changing Table Locations

    Hello,
    we have several reports which we use by different customers. The customers use different name spaces (table locations) for the same data. To use the same reports with different table locations, we wrote a piece of software replacing the connection strings and table locations. 
    Example:
    A report should be used in a test environment as well as in a production environment:
      The original SQL is (using a DB2 database on a AS400):
        SELECT alias.name FROM as400.production.users alias
      The modified SQL looks like:
        SELECT alias.name FROM as400.test.users alias
    Up to now we used Crystal XI and developed using RDC. We solved the above described problem by reading the report SQL string, replacing the table location in this string and assigned it back to the report object. Modifying the SQL string has the advantage that it works fine also for reports which contain a SQL command.
    Since Crystal Reports 2008 this is not possible anymore (no RDC, no direct way to modify the report SQL string).
    My first approach was to use the CrystalDecisions.CrystalReports.Engine.Table object. First I just wanted to see what really was the content of the Location and Name property:
    for (int i = 0; i < rdReport.Database.Tables.Count; ++i)
      Table rt = rdReport.Database.Tables<i>;
      Console.WriteLine("Table Nr : {0}", i);                   
      Console.WriteLine("  Table Loc  : {0}", rt.Location);
      Console.WriteLine("  Table Name : {0}", rt.Name);
    My problem with this is that the output for the report with the SQL in the above example is:
    Table Nr: 0
      Table Loc : users
      Table Name: alias
    So obviously not the real table location and table name is returned, but instead the table name for the table location and the alias for the table name. Unsurprisingly setting the location had not the originally desired effect.
    Furthermore if the report was designed using a SQL command, the location and in the name property contain the string COMMAND. Therefore the table object doesn't seems to be the solution to my problem.
    Thanks to the help of a user in this forum here, I figured out how to read the SQL string of a report. Unfortunately I did not found a way to assign it back to the report.
    Has anybody here an idea how to solve my problem? I'm open for every kind of hint.
    Thanks in advance,
    Ron

    My solution looks like this:
    ReportDocument rdReport = new ReportDocument();                   
    rdReport.Load(sReportName, OpenReportMethod.OpenReportByTempCopy);
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rcDocument = rdReport.ReportClientDocument;                   
    for (int i = 0; i < rdReport.Database.Tables.Count; ++i)
        CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable rctTable = rcDocument.DataDefController.Database.Tables<i>;
        if (rctTable.ClassName == "CrystalReports.CommandTable")
            Console.WriteLine("Processing CommandTable {0}",rctTable.Name);
            Console.WriteLine("  Old Qualified Name: {0}", rctTable.QualifiedName);
            Console.WriteLine("  Old Alias:          {0}\n" , rctTable.Alias);
            CrystalDecisions.ReportAppServer.DataDefModel.CommandTable tbOldCmd = (CrystalDecisions.ReportAppServer.DataDefModel.CommandTable) rctTable;
            CrystalDecisions.ReportAppServer.DataDefModel.CommandTable tbNewCmd = new CrystalDecisions.ReportAppServer.DataDefModel.CommandTable();
            tbNewCmd.Name = tbOldCmd.Name;
            tbNewCmd.Alias = tbOldCmd.Alias;
            tbNewCmd.CommandText = sNewSql;
            tbNewCmd.ConnectionInfo = tbOldCmd.ConnectionInfo.Clone(true);
            CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag pbAttr = tbNewCmd.ConnectionInfo.Attributes;
            // set dlls
            pbAttr["Database DLL"] = "crdb_ado.dll";
            pbAttr["QE_DatabaseName"] = "NL67S021OUD";
            pbAttr["QE_DatabaseType"] = "OLE DB (ADO)";
            pbAttr["QE_ServerDescription"] = "192.0.5.24";
            pbAttr["QE_SQLDB"] = "True";
            pbAttr["SSO Enabled"] = "False";
            // set connection string                  
            CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag pbLogOnProp = (CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag)pbAttr[sAttrLogOnProp];
            pbLogOnProp.RemoveAll();
            // strangely comma seperated values instead of semicolon seperated values are needed here
            pbLogOnProp.FromString("Provider=IBMDA400,Data Source=" + sServerName + ",Initial Catalog=" + sDBName + ",User ID=" + sUserId + ",Password=" + sPwd + ",Convert Date Time To Char=TRUE,Catalog Library List=,Cursor Sensitivity=3");
            tbNewCmd.ConnectionInfo.UserName = sUserId;
            tbNewCmd.ConnectionInfo.Password = sPwd;
            rcDocument.DatabaseController.SetTableLocation(tbOldCmd, tbNewCmd);                           
        else
            Console.WriteLine("Processing Table {0}",rctTable.Name);                           
            Console.WriteLine("  Old Qualified Name: {0}", rctTable.QualifiedName);
            Console.WriteLine("  Old Alias:          {0}\n", rctTable.Alias);
            CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable rctNew = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
            rctNew.Name = rctTable.Name;
            rctNew.Alias = rctTable.Alias;
            rctNew.QualifiedName = sDBName + ".V41TSTDBF.CRGUOPF";
            rctNew.ConnectionInfo = rctTable.ConnectionInfo.Clone(true);
            CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag pbAttr = rctNew.ConnectionInfo.Attributes;
            // set dlls
            pbAttr["Database DLL"] = "crdb_ado.dll";
            pbAttr["QE_DatabaseName"] = "NL67S021OUD";
            pbAttr["QE_DatabaseType"] = "OLE DB (ADO)";
            pbAttr["QE_ServerDescription"] = "192.0.5.24";
            pbAttr["QE_SQLDB"] = "True";
            pbAttr["SSO Enabled"] = "False";
            // set connection string                  
            CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag pbLogOnProp = (CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag) pbAttr[sAttrLogOnProp];
            pbLogOnProp.RemoveAll();
            // strangely comma seperated values instead of semicolon seperated values are needed here
            pbLogOnProp.FromString("Provider=IBMDA400,Data Source=" + sServerName + ",Initial Catalog=" + sDBName + ",User ID=" + sUserId + ",Password=" + sPwd + ",Convert Date Time To Char=TRUE,Catalog Library List=,Cursor Sensitivity=3");
            rctNew.ConnectionInfo.UserName = sUserId;
            rctNew.ConnectionInfo.Password = sPwd;                         
            rcDocument.DatabaseController.SetTableLocation(rctTable, rctNew);
            Console.WriteLine("  New Qualified Name: {0}", rctTable.QualifiedName);
            Console.WriteLine("  New Alias:          {0}\n", rctTable.Alias);
    Console.WriteLine("\nSetting parameter {0} to value {1}", rdReport.ParameterFields[0].Name, iDataId);
    rdReport.SetParameterValue(0, iDataId);
    Console.WriteLine("\nShow SQL: ");
    CrystalDecisions.ReportAppServer.Controllers.RowsetController rsController;
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rdClient = rdReport.ReportClientDocument;
    CrystalDecisions.ReportAppServer.DataDefModel.ISCRGroupPath rdGroupPath = new CrystalDecisions.ReportAppServer.DataDefModel.GroupPath();
    string temp;
    string sql;
    rsController = rdClient.RowsetController;
    sql = rsController.GetSQLStatement(rdGroupPath, out temp);
    Console.WriteLine(sql);
    Console.WriteLine("Printing");
    PageMargins pmMargins = rdReport.PrintOptions.PageMargins;
    pmMargins.bottomMargin = 350;
    pmMargins.leftMargin = 350;
    pmMargins.rightMargin = 350;
    pmMargins.topMargin = 350;
    rdReport.PrintOptions.ApplyPageMargins(pmMargins);
    rdReport.PrintOptions.PrinterName = sPrinterName;
    rdReport.PrintToPrinter(1,     // copies
                            false, // collated
                            0,     // start page
                            0);   // end page
    rdReport.Close();
    Regards,
    Ron

  • Crystal Reports 2008 Fix Pack 2.8 file is corrupt

    Hi,
        I tried to download and install the Crystal Reports 2008 Fix Pack 2.8 but each time the extractor tell me that the file is corrupt.
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
    Thank you

    Sent the the upload team also.
    Try the MSI package to see if that works for you.
    And please post new issues in new posts. This one if fixed.
    MSM's have been re-uploaded.
    Thank you
    Don
    Edited by: Don Williams on Jun 18, 2010 9:04 AM

  • Crystal Reports 2008 Crashes when opening File/Page Setup

    Post Author: jrm2byu
    CA Forum: General
    I am running Crystal Reports 2008 full version on Windows Vista. Every time I click on File/Page Setup, or File/Print the program will crash. There are no updates available for 2008. I also have Crystal Reports 8.5 and 10 installed on the same computer. Any ideas what might be causing this crash?

    Post Author: Ray Norkus
    CA Forum: General
    I've got the same issue as well. Does anyone have a solution?
    A quick printing workaround was to export to a pdf and then print but now I actually need to modify my page dimensions.
    Ray

  • Crystal Report 2008 doesn't set  page size when export to excel file

    Hi,
    I am using Crystal Report 2008 Developer edition.
    At Crystal report design time setting the below page setup:
    Page Options -
       to A3(297X420 mm)
    Orientation --- Landscape
    and using the following code in .net (c#)
    I am using below format options to export in excel in .net 2005
    ReportDocument oReport = new ReportDocument();
    oReport.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
    oReport.FormatEngine.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA3;
    if (aParamlist.ReportFormat == ReportFormatEnum.MicrosoftExcel)
    ExcelFormatOptions excel = new ExcelFormatOptions();
    excel.ExcelUseConstantColumnWidth = false;
    // Use detail section one as a guideline to determine column width
    excel.ExcelAreaGroupNumber = 1;
    //excel.ExcelAreaType = AreaSectionKind.Detail;
    excel.ExcelAreaType = AreaSectionKind.Detail;
    // Prepare exporting options
    ExportOptions export = oReport.ExportOptions;
    export.FormatOptions = excel;
    export.ExportFormatType = ExportFormatType.Excel;
    oReport.Export();
    when export to excel it doesn't set the Paper Size to  A3(297X420 mm).
    Is there any way to set the paper size while export to excel or in other formats also????
    Thanks & Regds,

    Hi,
    thanks for your email.
    This is not happening in development environment.It is setting the paper size anf paper orientation properly.
    this is happening in the production environment where only redist installation is done.
    thanks

  • Crystal Report 2008 SP2 Dynamic image file

    ASP.NET2008 C# +Crystal Report 2008 SP2 
    製作動態顯示圖片的報表
    資料庫是SQL2005 內存圖檔的路徑
    使用DataSet+Report Document的方式產生報表資料
    動態圖片是利用工是產生的
    現在發現以下問題，其他固定顯示的圖片正常
    1.未安裝SP1 &SP2
      (1)在VS下建置檔案：圖片正常顯示，且有錯誤訊息
      (2)部署後直接開啟網頁，無法顯示動態產生的圖片
      (3)錯誤訊息如下：
      網頁錯誤詳細資料
      使用者代理程式: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
        時間戳記: Mon, 1 Feb 2010 08:22:08 UTC
        訊息: 無法判定字串常數的結尾
      行: 23
        字元: 19
        程式碼: 0
        URI: http://192.168.1.89/aspnet_client/system_web/2_0_50727/crystalreportviewers12/js/dhtmllib/language/zh_TW/labels.js
      2.安裝SP1 &SP2 後
      (1)在VS下建置檔案：圖片正常顯示，且有錯誤訊息
      (2)部署後直接開啟網頁，無法顯示動態產生的圖片，且有錯誤訊息(同2(1))
        (3)錯誤訊息如下：
    網頁錯誤詳細資料
    使用者代理程式: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
    時間戳記: Wed, 3 Feb 2010 00:45:39 UTC
    訊息: 無法判定字串常數的結尾
    行: 129
    字元: 19
    程式碼: 0
    URI: http://192.168.1.89/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allStrings_zh_TW.js

    Hi Florian,
    I'm having the same problem, have you by any chance found a solution?
    Gajus.

  • Error while dynamically setting logo image in Crystal Report 2008

    Hi,
    We have embedded Crystal Report 2008 JRC in our web application which is an Enterprise Archive (EAR) deployed on WebSphere Application Server.
    The RPT files bundulled in the archive displays a logo which is dynamicalli picked up by the RPT files from a configured location. Due to this the Report generation crashes when travesed to the sub reports/ groups within RPT. We have observed that this problem never occures if the logo is hard coded within the RPT files.
    The report crashing causes another big problem, it crashes the Applciation Server too. This is major concern to us and we need a resolution to this problem.
    Thanks in advance
    Alok Potdar

    FULL Stack Trace is as follows. We have not pasted in our earlier post...............
    3XMTHREADINFO      "WebContainer : 4" (TID:0x16AAE100, sys_thread_t:0x14B1F114, state:R, native ID:0x000015F4) prio=5
    4XESTACKTRACE          at sun/awt/color/CMM.cmmLoadProfile(Native Method)
    4XESTACKTRACE          at java/awt/color/ICC_Profile.getInstance(ICC_Profile.java:784)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.setImageData(JPEGImageReader.java:630)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.readImageHeader(Native Method)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.readNativeHeader(JPEGImageReader.java:588)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.checkTablesOnly(JPEGImageReader.java:343)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.gotoImage(JPEGImageReader.java:465)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.getImageMetadata(JPEGImageReader.java:885)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/image/ImageUtils.a(SourceFile:896)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/image/ImageUtils.if(SourceFile:873)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/JavaImage.do(SourceFile:183)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/CrystalImage.createImage(SourceFile:50)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/FormattedOleObject.new(SourceFile:101)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/FormattedOleObject.<init>(SourceFile:71)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/FormattedReportObject.a(SourceFile:148(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/w.for(SourceFile:105(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:428(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:250(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/u.a(SourceFile:887(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/u.e(SourceFile:784(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/u.for(SourceFile:242(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:243(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:210(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/v.a(SourceFile:185(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/v.a(SourceFile:230(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:359(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:133(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ColumnFormatter.for(SourceFile:120(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.a(SourceFile:503(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.a(SourceFile:452(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.a(SourceFile:369(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ah.a(SourceFile:70(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ReportColumnFormatter.a(SourceFile:86(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/SinglePageFormatter.a(SourceFile:332(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:359(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:133(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ColumnFormatter.for(SourceFile:120(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/SinglePageFormatter.for(SourceFile:177)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/PageFormatter.do(SourceFile:727)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/PageFormatter.formatPage(SourceFile:226)
    4XESTACKTRACE          at com/businessobjects/reports/sdk/requesthandler/ReportViewingRequestHandler.byte(SourceFile:219)
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.do(SourceFile:1909(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.if(SourceFile:661(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.a(SourceFile:167(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter$2.a(SourceFile:529(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter$2.call(SourceFile(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/common/ThreadGuard.syncExecute(SourceFile:95(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.for(SourceFile:525(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.int(SourceFile:424(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.request(SourceFile:352(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/sdk/erom/jrc/a.a(SourceFile:54(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/sdk/erom/jrc/a.execute(SourceFile:67(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/proxy/remoteagent/RemoteAgent$a.execute(SourceFile:716(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/proxy/remoteagent/CommunicationChannel.a(SourceFile:117(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/proxy/remoteagent/RemoteAgent.a(SourceFile:537(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/ds.a(SourceFile:186(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/ReportSource.a(SourceFile(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/ReportSource.getPage(SourceFile:767)
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/AdvancedReportSource.getPage(SourceFile:324)
    4XESTACKTRACE          at com/crystaldecisions/reports/reportengineinterface/JPEReportSource.getPage(SourceFile:149)
    4XESTACKTRACE          at com/businessobjects/report/web/event/s.a(SourceFile:158)
    4XESTACKTRACE          at com/businessobjects/report/web/event/s.a(SourceFile:127)
    4XESTACKTRACE          at com/businessobjects/report/web/event/bt.a(SourceFile:47)
    4XESTACKTRACE          at com/businessobjects/report/web/event/bw.broadcast(SourceFile:93(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/report/web/event/am.a(SourceFile:53)
    4XESTACKTRACE          at com/businessobjects/report/web/a/t.if(SourceFile:2104)
    4XESTACKTRACE          at com/businessobjects/report/web/e.a(SourceFile:300)
    4XESTACKTRACE          at com/businessobjects/report/web/e.a(SourceFile:202)
    4XESTACKTRACE          at com/businessobjects/report/web/e.a(SourceFile:135)
    4XESTACKTRACE          at com/crystaldecisions/report/web/ServerControl.a(SourceFile:607)
    4XESTACKTRACE          at com/crystaldecisions/report/web/ServerControl.processHttpRequest(SourceFile:342)
    4XESTACKTRACE          at com/ibm/_jsp/_CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
    4XESTACKTRACE          at com/ibm/ws/jsp/runtime/HttpJspBase.service(HttpJspBase.java:87)
    4XESTACKTRACE          at javax/servlet/http/HttpServlet.service(HttpServlet.java:856(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/servlet/ServletWrapper.service(ServletWrapper.java:1143(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/servlet/ServletWrapper.handleRequest(ServletWrapper.java:591(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/wswebcontainer/servlet/ServletWrapper.handleRequest(ServletWrapper.java:481(Compiled Code))
    4XESTACKTRACE          at com/ibm/wsspi/webcontainer/servlet/GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
    4XESTACKTRACE          at com/ibm/ws/jsp/webcontainerext/AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:226)
    4XESTACKTRACE          at com/ibm/ws/webcontainer/servlet/CacheServletWrapper.handleRequest(CacheServletWrapper.java:90(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/WebContainer.handleRequest(WebContainer.java:748(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/wswebcontainer/WebContainer.handleRequest(WebContainer.java:1466(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/channel/WCChannelLink.ready(WCChannelLink.java:119(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/http/channel/inbound/impl/HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/http/channel/inbound/impl/HttpInboundLink.handleNewInformation(HttpInboundLink.java:387(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/http/channel/inbound/impl/HttpICLReadCallback.complete(HttpICLReadCallback.java:102(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/tcp/channel/impl/AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:143(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/AsyncFuture.completed(AsyncFuture.java:136(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/ResultHandler.complete(ResultHandler.java:196(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/ResultHandler.runEventProcessingLoop(ResultHandler.java:751(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/ResultHandler$2.run(ResultHandler.java:881(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/util/ThreadPool$Worker.run(ThreadPool.java:1473(Compiled Code))
    NULL          
    1XMTHDINFO     All Thread Details
    NULL           -
    NULL

  • VS2008/VS2005 and Crystal Reports 2008 Developer

    Hi,
    1.) I am using VS2008 and Crystal Reports 2008 Developer. Are there any issues I need to consider when developing using both of the above? (or with VS2005)
    2.) The confusion for me is in regards to the SDK. From what I understand from articles etc is that using CR 2008 dev we can use the .NET SDK or RAS SDK for development purposes?
    3.) So downloaded the sample code for RAS .NET from [here|https://www.sdn.sap.com/irj/boc/businessobjects-samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375] and tried "DatabaseLogon_CS" example, as the option. It automatically opened in VS2005 (no problem) however it would not run.
    I would get an error :
    Failed to connect to server "localhost".
    Error returned from Windows Sockets API : 0.
    and line causing this is >>> rcd.Open(ref path, 0);
    Code below:
            string sampleReportPath = @"C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Samples\en\Reports\Demonstration\World Sales Report.rpt";
            object path = (object)sampleReportPath;
            // Create an instance of the ReportClientDocument.
            ReportClientDocument rcd = new ReportClientDocumentClass();
            // Set the location of the RAS server.
            rcd.ReportAppServer = "localhost";
            // Use the Open() method of the ReportClientDocument to open the report.
            rcd.Open(ref path, 0);
    I have been able to open the RPT file by itself. So it does 'see' the database.
    Reason why it would not run?
    Any help would be appreciated. Thanks

    If you're using the sample code from our website, make sure you have uncommented the InprocRAS option in the ConfigureCrystalReports method (see below). From your error description it seems like you're using the unmanaged RAS option, which requires a RAS server.
    private void ConfigureCrystalReports()
            /* The following methods implement the same sample functionality in three different RAS
             * scenarios. Uncomment the method you would like to use.
             * - inprocRAS() logs onto a databse using RAS and SQL authentication.
             * - managedRAS() logs onto a database using RAS and SQL authentication from a managed RAS server.
             * - unmanagedRAS () logs onto a database using RAS and SQL authentication from an unmanaged RAS server.
             * Undocument the call to the method which applies to your appropriate RAS settings.
            DatabaseLogon_inprocRAS();
            //DatabaseLogon_managedRAS();
            //DatabaseLogon_unmanagedRAS();

  • Some reports do not work after upgraded to Crystal Report 2008

    Hi All,
    After upgraed from Crystal Report XI to Crystal Report 2008, some reports work fine. others not. All of the not-working reports have the same problem: Database connection failed.
    And I can even not be able to create a brand new report. The problem looks like following:
        1. Created a new ASP.NET solution in Visual Studio 2008. The page file is default.aspx
        2. Created an empty Crystal Report file: CrystalReportTEST.rpt
        3. Asign CrystalReportTEST.rpt to default.aspx
        4. Run default.aspx. It works fine
        5. Just connect to database without place any field to the report
        6. Run default.aspx again. It does not work. It shows blank screen with the message "Database logon failed." on the top-left corner.
    Regards,
    Triple

    Hi Amit,
    I have tested many times again for creating new report in new solution. It looks like that, the preview in VS2008 always work fine, but when runing the application, sometimes it works sometimes does not work. I have not still found the role. Following step shows my testing process:
    1. Start Visual Studio 2008
    2. Go to menu "File->New->Web Site..."
    3. In dialogbox "New Web Site"
              a. Highlight "ASP.NET Crystal Reports Web Site"
              b. Select location "File System"
              c. Select language "Visual C#"
              d. Select "E:\JL\CrystalReportsWebSite1"
              e. Click button "OK"
    4. It appears dialogbox "Crystal Reports Gallery"
              a. Select "Using the Report Wizard" in portion of "Create a New Crystal Report Document"
              b. Select "Standard" in portion of "Choose an Expert"
              c. Click button "OK"
    5. It appears dialogbox "Standard Report Creation Wizard"
              a. Click button "Cancel"
    6. It is back to page edit view of "CrystalReport1.rpt"
    7. Click button "Main Report Preview". It shows the preview with blank page
    8. Click button "Main Report". It came back to the edit view
    9. Go to menu "Crystal Reports -> Database -> Database Expert...", dialogbox "Database Expert" appears. Select table u201Cactivity_cdu201D as showing in following screen shot:
    10. Click button u201COKu201D. It returns to the edit view without any changes
    11. Place some fields into the report, then click button "Main Report Preview". It shows the preview with data
    12. Run application by pressing key F5 or key combinition Ctrl+F5, it shows up database connection import screen
    13. Close the browser and back to file Default.aspx, change u201CEnableDatabaseLogonPromptu201D to u201DFalseu201D and run the application again, it shows following message "Database logon failed."
    Regards,
    Triple

Maybe you are looking for