Crystal Report 2008 SP3 and BO XI 3.1 conflict

Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls   :"<
T______T

Hi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts

Similar Messages

  • Crystal Reports 2008 SP3 Additional parameter values are needed

    I recently upgraded to Crystal Reports 2008 SP3, and now when I try an export a report from the Crystal Reports Designer, I get the error "Additional parameter values are needed before this report can be saved or viewed with data.  Click 'Ok' to enter the missing values or 'Cancel' to proceed without data".  I am trying to export the report to Crystal Reports format.  The report is getting data from a MS SQL 2005 stored proc. I tried building a new simple report (just took all the fields in the result set and put them in the details section) using the same stored proc, and get the same error when I try to export.  
    FYI, before I try to export I always preview the data in the report, so the parameters are defiantly set correctly.
    This was working correctly in Crystal Reports 2008 SP2.

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&[email protected]&rests=1254701640551

  • Crystal report 2008 SP3 Ver 12.3.1.684  application crash on runtime

    hi all ...
    i have problem running my report using crystal crystal report 2008 SP3 Ver 12.3.1.684 .. it stop responding while i click preview the report ... and my report is connect to ODBC database source provider..  the crystal report will crash while connect using ODBC(RDO) but other than that all work fine ...
    here is the error log while try run the report ..thx and pls help as i am no idea for this .. and this report is come one of my SOLOMON SL 2011 while i want to edit my existing crystal report
    Description:
      Stopped working
    Problem signature:
      Problem Event Name:     APPCRASH
      Application Name:     crw32.exe
      Application Version:     12.3.1.684
      Application Timestamp:     4c3ddcf1
      Fault Module Name:     ntdll.dll
      Fault Module Version:     6.1.7601.17514
      Fault Module Timestamp:     4ce7ba58
      Exception Code:     c0000005
      Exception Offset:     0002e3fb
      OS Version:     6.1.7601.2.1.0.16.7
      Locale ID:     1033

    I have about the exact same error and it happens when I hit refresh to update the records.  When I go into the Formula Workshop, there is nothing in Report Custom Function.  Can you give me a little more detail on how you fixed the problem.
    Thanks.

  • Crystal reports 2008 sp3 : An error has occurred while attempting to load t

    Hello,
    Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it.  If there is a better forum for this question, please let me know or feel free to move it.
    We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
    I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
    Our Environment:
    Development Computer (32-bit, WinXP)
      VS2008 (fully updated, was not installed with its Crystal Reports feature)
      Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
    Database Server (64-bit)
      "SERVER2" is a Microsoft SQL Server 2008 server, fully updated
    Web Server (64-bit)
      "SERVER3" is a Microsoft Server 2008 R2 Web server.
    We have an application that is installed on the Web server and it pulls data from the database server.
    The webpages are accessing the database properly.  There is a ShowReport.aspx webpage that has the
    CrystalReportsViewer on it.  We send parameters and logon information to ShowReport.aspx.  ShowReport
    works properly on our development computer and the report looks good, but it fails on the web server.
    We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
    Our application pool on the web server for this application is set to 32-bit mode.  When I launch the
    application, it works properly with the database and displays data on web pages, but when I try to
    view a report on ShowReport, I get the following error message:
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.
    According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
    the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed.  They are both Crystal Reports 2008 and not .NET.  CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3.  On our development computer, .ENGINE is 12.0.2000.0 and
    the same version is on the web server.
    So, I am completely at a loss as to why we are encountering this error.  Help, Please!!!
    Thank you in advance,
    Mike

    Hi Mike,
    Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
    Thank you
    Don

  • Error while trying to install Crystal Reports 2008 SP3

    Has anyone else come across this error before when running the SP3 update installer;
    Crystal Reports 2008 SP3 Update is not allowed to install because a patch with a higher version was detected.
    The installation then terminates.  There has been nothing installed on this server to do with Crystal, aside from CR2008, SP1 and then the attempt at SP3.
    ANY help appreciated
    Edited by: Ludek Uher on Aug 18, 2010 2:07 PM

    Priyanka,
    I'm already extremely annoyed that a new server build requires installation of CR2008, then SP1 before SP3 will even allow installation.  Adding SP2 into the mix just makes it seem like none of the developers tested anything (which I'm seeing from just about every software company I deal with these days).
    Besides, the 'SAP Business Objects Support Software Downloads' page no longer lists SP1 or SP2 as available downloads, so I'm going to have to try Don's solution first.
    Regards.

  • Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5

    Hello,
    My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports.  As well, I would like to ask if there is a simple workaround that does not involve updating hundreds of reports.
    The issue is that the runtime engine incorrectly returns the report selection formula.  I have included sample code showing what I mean.
    To reproduce;
    1. Create a simple report that has a date range filter like: 
      ({Orders.Order_Date} >= {?START_DATE})  
      AND ({Orders.Order_Date} <= {?END_DATE})
    2. Create a test app as follow that loads a report using the following code:
    ReportDocument rpt = null;
    try
      rpt = new ReportDocument();
      rpt.Load("TestReport.rpt");
      this.txtMessage.Text = string.Format(
        "ReportSelectionFormula:{0}{1}",
         Environment.NewLine,
      rpt.RecordSelectionFormula);
    catch (Exception ex)     
      this.txtMessage.Text = ex.ToString();     
    3.  Install Crystal Reports 2008 SP3 Fix Pack 3.5 Runtime [https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip]..
    4.  Execute the app.
    At this stage, the screen shows
    ReportSelectionFormula:
    (   (  NOT  {Orders.Order_Date} >= {?START_DATE}  )   AND   (  NOT  {Orders.Order_Date} <= {?END_DATE}  )   ) 
    The expected value is:
    ReportSelectionFormula:
    (   (  {Orders.Order_Date} >= {?START_DATE}  )   AND   (  {Orders.Order_Date} <= {?END_DATE}  )   ) 
    If we were to repeat the same test above but use the Crystal Reports 2003 SP3 runtime (i.e. no Fix Pack), which can be dowloaded from [https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip], we would get the correct report selection formula. A side-effect for this incorrect report selection formula is a runtime exception complaining about an errorkind and a boolean being expected. 
    Do you know if there is any workaround that I can apply in code, perhaps a different Fix Pack?  Is there a Fix Pack expected to be released soon?  It is not practical for us to update our reports and use a different style in the record selection formula because we have many such reports, and our customers probably have even more.
    Thank you.
    -Carlos.

    Already a known issue, here's the [KB 1584095 - A boolean NOT is added at the beginning of a record selection formula when the report is loaded by the Crystal Reports .NET SDK |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383334333033393335%7D.do]

  • Crystal Reports 2008 SP3 - "u25azalea.dll" missing

    We have installed Crystal Reports 2008 SP3 on our application server.
    Windows Server 2008 R2  Standard
    64-bit operating system
    1. I create a Report and choose a field for barcode
    2. Right-click on a that field and choose u201CChange to barcodeu201D
    3. I choose "Code39" in the list
    4. I change the font of the field to "Barcode EAN13"
    5. It shows correctly in Crystal design/preview mode.
    6. When I try to run the report from our windows application this message appear: "UFL 'u25azalea.dll' that implements this function is missing"
    7. I download the file from http://www.azalea.com/crystal-reports/
    8. I copy the file "u25azalea.dll" into the path: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise     12.0\win32_x86
    8. It still shows the message!
    What should I do?

    Hello,
    No need to select #3 if you are going to change it to #4. Just edit the field and select your barcode font. You only need that file if you use the Code 39 font.
    Odd though that it asked for that ufl. Look for it on your local PC and copy it over, could be the one you downloaded is an older version.
    Don

  • Crystal Reports 2008 SP3 &VS Studio 2008

    Hi,
    i'm trying to use Crystal Reports 2008 with SP3, Visual Studio 2008 and OS Windows Server 2003 (I use this Server OS because i'm developing for Microsoft SharePoint).
    Before upgrading to Crystal Reports SP3 i could not set a basic Visual Studio C# Dataset as the Datasource of my Report. Everytime i get the following Error:
    Unknown Database Connector Error - Error in file temp_GUID.rpt
    Then i read theis forum and it was mentioned that maybe SP3 could solve this problem. But after applying CR 2008 SP3 the following Error occur (VS cancel the debug mode and this error is logged to the Windows Server-Log):
    Message: Could not load file or assembly 'crdb_adoplus, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)
    I'm using the following Code-Snippet:
    CrystalReport1 report = new CrystalReport1();
    NewsDataSet nds = new NewsDataSet();
    DataRow r;
    r = nds.Tables[0].NewRow();
    r["Title"] = "Title";
    r["Body"] = "Body";
    nds.Tables[0].Rows.Add(r);
    //Now the exception will be thrown
    report.SetDataSource(nds.Tables[0]);
    Maybe someone can help me to solve this problem.
    Thanks in Advance!
    Christian

    Well guys,
    i spent the whole day with installing and uninstalling the CR2008 Service Packs with no success. My opion was that eventually the " CR2008 SP3 Full Build" from this download site
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
    causes the error, but after applying SP1 the same error occurs.
    As a reminder the error text:
    Message: Could not load file or assembly 'crdb_adoplus, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418)
    or
    Exception: System.UnauthorizedAccessException
    Message: Access to the path 'C:\WINDOWS\TEMP\temp_51231be7-4c43-40f1-b0ee-67e76414e046.rpt' is denied.
    StackTrace:    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.Delete(String path)
       at CrystalDecisions.CrystalReports.Engine.ReportClass.Dispose(Boolean bDisposeManaged)
       at CrystalDecisions.CrystalReports.Engine.ReportClass.Finalize()
    Maybe its a permission problem, but the ServiceAccount which performs the action has full control on the temp and CrystalReports Installation folder, so i don't know what to do else.
    Then i tried to  resolve the error, which occurs without any Service Pack:
    Unknown Database Connector Error
    Error in File temp_184c79e9-4eeb-41dd-9043-582b30ac7281 {82AF1B98-C271-4007-B793-723CCFD63FFD}.rpt:
    Unknown Database Connector Error
    Also with no success. I'm using the following Code-Snippets:
    Simple XML-Schema (xsd) because i don't use a Database and the data is generated dynamically:
    <?xml version="1.0" encoding="utf-8"?>
    <xs:schema id="NewsSchema"
        targetNamespace="http://tempuri.org/NewsSchema.xsd"
        elementFormDefault="qualified"
        xmlns="http://tempuri.org/NewsSchema.xsd"
        xmlns:b="http://schemas.microsoft.com/BizTalk/2003"
        xmlns:xs="http://www.w3.org/2001/XMLSchema"
    >
      <xs:element name="News">
        <xs:complexType>
         <xs:sequence>
            <xs:element name="Title" type="xs:string" />
            <xs:element name="Body" type="xs:string" />
          </xs:sequence>
        </xs:complexType>
    </xs:element>
    </xs:schema>
    Then i add this as an ADO.NET (XML) connection an i'm able to integrated the two fields in the report.
    Then i try to call the report with the following C#.Net Code:
    +DataSet ds = new DataSet();
    DataTable t = new DataTable("News");
    +DataColumn title = new DataColumn("Title");+
    +DataColumn body = new DataColumn("Body");+
    +title.DataType = Type.GetType("System.String");+
    +body.DataType = Type.GetType("System.String");+
    +t.Columns.Add(title);+
    +t.Columns.Add(body);+
    +ds.Tables.Add(t);+
    +DataRow drDataRow;+
    +drDataRow = t.NewRow();+
    +drDataRow["Title"] = "My Title";+
    +drDataRow["Body"] = "My Body";+
    +t.Rows.Add(drDataRow);+
    //the exception is thrown here
    report.SetDataSource(ds);
    Now i'm really frustrated because i don't know what to do to resolve this problems and i stuck with this errors for a couple of days now. Any further help or suggestions would be great.
    With kind regards,
    Christian
    Edited by: C.Kaiser on Oct 5, 2010 5:07 PM

  • Landscape Problems with Crystal Reports 2008 SP3

    My initial install of Crystal Reports 2008 was SP2 (12.2.0.290).  After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
    The reports are set up as 11x8.5 in landscape.  They are loaded into a third party application that uses a Crystal Reports reviewer. 
    For some printers, the reports will reset to the 11x17 page size in portrait.  For others the reports stay at 11x8.5 landscape.
    The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option.  None of this helped.
    I backed out FP3.3 and that did not help.  After I backed out SP3, the problem went away.  It seems like something changed in the SP3 release that is causing this issue.
    What's the best way to communicate this to SAP?  I would like to see this fixed in a future patch.

    My initial install of Crystal Reports 2008 was SP2 (12.2.0.290).  After installing SP3 and Fix Pack 3.3, I started to experience problems with reports in landscape orientation.
    The reports are set up as 11x8.5 in landscape.  They are loaded into a third party application that uses a Crystal Reports reviewer. 
    For some printers, the reports will reset to the 11x17 page size in portrait.  For others the reports stay at 11x8.5 landscape.
    The reports are typically set up with the "No Printer (optimize for screen display)" option active, but I tried a wide range of options including setting the "Microsoft XPS Document Writer" as the reference printer to activating the "Dissociate formatting Page Size and Printer Paper Size" option.  None of this helped.
    I backed out FP3.3 and that did not help.  After I backed out SP3, the problem went away.  It seems like something changed in the SP3 release that is causing this issue.
    What's the best way to communicate this to SAP?  I would like to see this fixed in a future patch.

  • Crystal Reports 2008 - Eclipse and JNDI connection.

    I am evaluting Crystal Reports 2008 .
    I want to use JNDI connection that is defined within my app server by Crystal reports so that I'll have better control of the properties defined.
    How do I set up JNDI data source connection in Crystal Reports 2008 ?
    I defined the following parameters u2026
                    JNDI Provider URL : jnp://localhost:1099
                    Initla Context as :  org.jnp.interfaces.NamingContextFactory
    And user name / password  as defined in JBoss setup
    I also have  u201Cjboss\client\jbossall-client.jaru201D in the classpath .     
    But I am getting Cannot instantiate class exception .
    Thanks in Advance for the help.

    Mr. Ted, We can expose JNDI connections from the appserver. Infact the database connection pool resoures are exposed as JNDI resources, JMS factory and connections are exposed as JNDI etc.
    In fact, JNDI is a means of securely exposing the resources managed by the app server to be used by trusted clients.
    We have achieved this on weblogic (8.1 - JDK 1.4.2) but we would like to replicate the same in glassfish app server ver 3.1.2 and would require the proper factory placed inside the rpt as well as the CRConfig.xml.
    Otherwise, (if we are using conventional URL string) when we ship the rpt files, we need to place this only as localhost. This mandates the presence of rpt files to be in the same server as database server and database. We want to avaoid this by creating a JNDI and use that database access resource inside the rpt files.

  • Crystal Reports 2008 - automation and scheduling

    Hey there Crystal Reports experts... please answer this question:
    I've been evaluating the Crystal Reports 2008 package (client package) and have been able to generate some nice summary reports form our SQL database using summary pages which have multiple (up to 4) embedded sub-reports in them.  I think it's doing what I need it to, but my next hurdle is to automate the summary report for 100+ different customers of ours.  The criteria which changes for each customer is a table value in each subreport as well as the date range for the data on the report.  I also need to have the title in the report header of each customer, change to reflect the different customer name and date range.
    Is there a way to automate this with the standard Crystal Reports 2008 version?  I've found a few 3rd party applications online that take care of the Crystal Report automation and scheduling as well as conditional data selection at the same time... is that what I need to use if we don't have ther server version of Crystal, or can I automate it using just the standard 2008 client version??

    Hi,
    Yes, you need the CR 2008 client license to create the reports and then the server license to distribute the reports.
    CR Server 2008 is a single server reporting solution for distributing Crystal Reports only.  BOE is a full BI server that can be scaled beyond a single server solution.  In addition to just reporting it has other capabilities such as ad hoc query and analysis, dashboarding/scorecarding, etc.
    CR Server 2008 currently does not include the "Publishing" functionality yet.  Therefore, if you schedule the report to email, all users will see the exact same report.  BOE XI 3.1 does have "Publishing" which lets you burst the report so that through a single schedule, each user only sees their slice of the data for that report.  You can still use CR Server to accomplish something similar, but it would require you to setup an individual schedule per every customer where each schedule is configured to only return the appropriate data for that customer.  This would require a little more effort to setup and maintain.

  • Using Crystal Reports 2008 SP3 with the Brother 9500PC, 9700PC, and P9800PC

    We have using Crystal Reports with the Brother Label printers for years until we were forced to use Crystal 2008.  The label printers have worked in the past and we usually create a label template in the printer driver and this configuration is stored in the Crystal Report.  These label printers can use several different size cartridges.  When creating a report using the Editor, the report displays and prints correctly using the template embedded into the report.  This is using the updated SP3.3 service pack.  The problem is in the Run Time application that is embedded in another application to run the reports.  When printing a label from the application, the report previews just fine with the correct size and format.  However, when you try to print the label, the run time driver ignores the template embedded in the report and instead uses the default settings for the printer driver.  So, if I have a 1 inch cartridge in the printer, and the default settings for the printer is a 1 1/2 inch cartridge, then the report will try to print assuming there is a 1 1/2 inch cartridge which will cause the application to fail.  This is a problem with Crystal 2008 (12) and we would like to find a solution to this.  Thanks, Doug

    Hi Cameron, 
    You can setup custom label sizes in Crystal.  In the folder where you installed Crystal Reports is a text file called Labels_en.txt.  This contains the label definition Crystal uses.  You can add a new label in here. 
    Now when you open Crystal and create a new report by selecting the Mailing Label Repotr Wizard, you will see your new label when you get to that step. 
    When save a report, the report will do two things.  If you have set the report to a specific printer, Crystal saves the printer and paper settings inside the RPT.  When the print engine runs the report, if it can't find the printer saved in the report it will default to the default printer. 
    What I believe is happening is the application is loading the report and because it can't find the label printer it was designed with it's going to the default printer.  So you do have to set the PrintReportOptions in your application to redirect the report to the correct printer, driver and papersize. 
    This has pretty much been the way since version 4 that I can remember.  The positive side is you don't have to set all the parameters yourself.  You can get the PrintReportOptions from the report when you open it.  Then you just need to pass the printer name, driver and port.  The rest of the options (papersize) will already be populated from the Get. 
    Good luck,
    Brian

  • Crystal Reports 2008 Server and MySQL DataBase source for reports

    Hello,
    I am having an issue with crystal reports server 2008. I have created a report on my local machine with crystal reports and the datasource is a ODBC connection to a MySQL database.
    The report works fine on my local. if i publish to the Crystal Reports Server, i get an error when i try and run the report.
    "error Failed to open the connection. "
    I have gone into the database connections for this report and put in the connection details. I have also created a ODBC connection on the server in windows to the actual database (installed both the 32bit and 64bit ODBC drivers, both Test succesfully). But when i go into crystal no matter what settings i try it will not work.
    anyone have any ideas?
    kthank you

    I have solved the issues. This may be usefull for anyone ...
    1. Make sure on the developer machine you have your ODBC connection setup under the System DNS setting in windows.
    2. On the Crystal Report Server, the exact same setup must be done under System DNS, same name, etc
    Once this was done, everything was fixed.

  • Crystal Report 2008 V12 and  Crystal Report in VS2008 problem

    I have made Crystal report Application using VS2008
    Since it has Crystal Report V 10.5 it is raising error as For SAP CR2008 V12
    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
    File name: 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
       at Test.FrmPurchaseDetail.button1_Click(Object sender, EventArgs e)
       at System.Windows.Forms.Control.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ButtonBase.WndProc(Message& m)
       at System.Windows.Forms.Button.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
    Test
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Program%20Files%20(x86)/Default%20Company%20Name/Setup1/Test.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    BLL
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Program%20Files%20(x86)/Default%20Company%20Name/Setup1/BLL.DLL
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_64/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    How to Solve this Problem
    How to use Crystal Report Viewer Version 12 instead of Crystal Report Version10 in Vs2008

    see this post:
    Can CR2008 be used with VB6 ?
    COM is a deprecated technology. Became deprecated along with Vb 6 not being supported by MS.
    Thus .NET or Java are your solutions at this time.
    Ludek

  • Doubt in creating a variable in Crystal Report 2008 SP3

    Hi,
    I am new to Crystal Reports, I need to create a variable with the below logic.
    No of Subscriptions Pending: COUNT(SUBSCRIPTION_ID) WHERE FCT_SUBSCRIPTION_ACTION.SUBSCRIPTION_ACTION_STATUS IN
    (SELECT SUBSCRIPTION_ACTION_STATUS_CODE FROM LKM_SUBSCRIPTION_ACTION_STATUS WHERE
    FINAL_STATUS_FLAG = 'T')
    My data source is an universe where I have SUBSCRIPTION_ID, SUBSCRIPTION_ACTION_STATUS, SUBSCRIPTION_ACTION_STATUS_CODE & FINAL_STATUS_FLAG objects.
    I have pulled all the required objects from the universe into the Crystal Query.
    As we don't have the option to use Where condition in CR (As per my knowledge), I want to know how to write the above logic using "If" or some other function.
    Thanks in Advance,
    Mitch.

    Hi Jamie,
    Thanks for your reply & sorry for the late reply, I was away for Christmas.
    I tried your formula but it is not working properly.
    If I use  "IF FINAL_STATUS_FLAG = 'T' THEN SUBSCRIPTION_ID" then it is giving all the subscriptions count instead of pending ones.
    We need count the Subscription_ID's based on the Flag Status & the Action_Status & Action_Status_Code as per the formula.
    No of Pending Subscriptions: COUNT(SUBSCRIPTION_ID) WHERE FCT_SUBSCRIPTION_ACTION.SUBSCRIPTION_ACTION_STATUS IN
    (SELECT SUBSCRIPTION_ACTION_STATUS_CODE FROM LKM_SUBSCRIPTION_ACTION_STATUS WHERE
    FINAL_STATUS_FLAG = 'T')
    But your method is not taking Status Codes into consideration (correct me, if I am wrong)
    While checking against the Database I found the following results
    1) SELECT DISTINCT SUBSCRIPTION_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS
         Result: AM, BA, CA, DC, DE, DO, FI, FU, IN, NE, NO, OH, RE, TC
    2) SELECT DISTINCT SUBSCRIPTION_ACTION_STATUS FROM FACT.FCT_ORDER_ACTION
          Result: DC, TC, AM, IN, DE, NE, CO, DO, NO, BA, CA
    Values in SUBSCRIPTION_ACTION_STATUS & SUBSCRIPTION_ACTION_STATUS_CODE differ. &
    3) SELECT ORDER_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS WHERE
    FINAL_STATUS_FLAG = 'T'
          Result: CA, DC, DO
    4) SELECT ORDER_ACTION_STATUS_CODE FROM LOOKUP.LKM_ORDER_ACTION_STATUS WHERE
    FINAL_STATUS_FLAG = 'F'
          Result: AM, BA, DE, FI, FU, IN, NE, NO, OH, RE, TC
    Any other way of doing this.
    Thanks,
    Mitch.

Maybe you are looking for

  • Input language changes when searching

    samsung galaxy s2 android 4.1.2 firefox 21 when searching using the address bar changing input language to hebrew enter characters at some point usualy after tapping space the input language is changed back to english thanx

  • N97 problems :(

    hello guys my mobile phone (N97) gives those errors ; Security Module Error and Memory Full, i sent it to nokia care point 2 times, i still have the same problem. Nokia Care point says no hardware problem, anyone have the same experience?I  am fed up

  • Wrong layout chart with IGS 7.0 and 3.0b webtemplates

    Hi, We just did an upgrade from BW 3.0b to 7.0. We also upgraded te IGS to 7.0. We don't want to upgrade our webtemplates to the new version yet. However, if we display a chart now, it shows a wrong layout. If we change the IGS back to an old version

  • Question on installing student edition of CS6.

    I purchased this from amazon.com.  There is a product code but no serial number.  It says a serial number will be emailed to you once your eligibility has been verified.  Does this mean I first install it as a trial?  I would have thought I would be

  • Re-downloading ringtones from iTunes

    I had bought 3 ringtones from iTunes. After the recent iOS 5 update, they r now missing from Both my phone and my iTunes itself. when I go to repurchase the ringtone, iTunes tells me that I have already bought it, but would I like to purchase it agai