Crystal report does;t exist in my machine

Hi,
I used to work with visual studio 2005 and I have decided to move to Visual Studio 2013. I have just finished creating my first web site and when I tried to use the crystal report as usual I found out that when I try to Add new item to my project I
don't see Crystal Report as usual. I have already installed it as shown in the attached image and still can't be found.
any help??

You say Crystal Reports doesn't exist in your machine then you say it does.
Visual Studio 2013 comes in different versions.
Visual Studio 2013 express itself comes in different versions.
Crystal Reports is 3rd party software. For troubleshooting Crystal Reports with Visual Studio you should be asking the question in an SAP forum with regard to using Crystal Reports with Visual Studio.
I would recommend you provide in your question which Visual Studio version you are using. And if it's Visual Studio Express which version of Visual Studio Express you are using. And of course the year of Visual Studio you are using. Perhaps even the OS your
system uses.
You can find the correct forum to use at SAP somewhere within the below link.
SAP Crystal Reports, version for Visual Studio
Although it's possible you may receive an answer in this forum from somebody experienced with your issue and SAP Crystal Reports.
La vida loca

Similar Messages

Report painter execution error - KH014 "Report does not exist".

Hi All,
I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
Has anyone encountered similar problem? How was it resolved?
Thanks.
Prashant

Hi Mikko,
Thanks for your reply but your solution is not working.
Hi Stacy,
I can execute the report from t codes like FSI3 & FSI0 in development.
I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
Please let me know if this is wrong method or there is any other option to transport this report in Production.
Thanks & Regards,
Prashant

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Crystal report not working on 64 bit machine

Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa Khan

Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Error after migration to Crystal Reports 12 for existing reports

Hi,
We had reports written using Crystal Reports Version 8.5. These reports were not modified for a long time. Recently, we had migrated to Crystal Reports 12 (2008). Some of the these existing reports were modified using the Crystal Reports 2008 designer. After installing our application (we ship Merge Module of Crystal Reports 12 i.e. 2008 which gets installed in GAC)
1) If we create new reports in 2008 designer and try to view these reports, it works as expected without any issue(s).
2 ) However, if these modified reports are tried to be viewed, there is an error which states "Database Logon Failed".
Details:
CrystalDecisions.CrystalReports.Engine.LogOnException     {"Database logon failed."}
ErrorID     CrystalDecisions.CrystalReports.Engine.EngineExceptionErrorID.LogOnFailed
InnerException     {"Database logon failed."}
Message      "Database logon failed."
Source     "CrystalDecisions.ReportAppServer.DataSetConversion"
Stack Trace        at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
TargetSite     {Boolean ThrowDotNetException(System.Exception)}
Also, it is worth to note that if we try to view these modified reports from any environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC, then these reports work as expected.
P.S. We have mechanism in application's code to reset the database connections when any report is being viewed using ReportDocument class' method.
From the above scenario I believe issue is specific to migration to Crystal Reports 12 (2008). Any help /workaround to solve this problem will be highly appreciated.

Make sure you have the latest SP for CR 2008 installed;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ensure you are deploying SP 2 runtime;
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100009159092009E/cr2008sp2_mm.zip
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip
If that does not help;
1) Do these reports work in the designer?
2) What database are you using and what is the connection type?
3) Compare the dlls loading on the systems where this app works (environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC) and a system that is giving you the error. Use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
4) Open the reports in the designer and look at the properties in the Database menu -> Set Datasource Location. Check to see if there are any differences between the two reports.
5) If there is a subreport in the report that causes the issue, remove it and see if the report works without the subreport.
Ludek

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

The type or namespace name 'Reporting' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

I have a Windows app that was built some 7 years ago on a WinXP machine using VS2005. It uses Crystal Reports for the reporting. We recently got new machines with Win7 x64 and I installed VS 2013 Pro. I moved the app to my machine and upgraded
it to that VS version. It previously had a .NET Framework target of version 2.0. I changed the target to version 4.5.
I want to use the MS Reporting instead of Crystal Reports. However, I cannot get the ReportViewer control to show up in the Toolbox.
I downloaded and installed the ReportViewer Runtime 2012. I installed the ReportViewer using the NuGen GUI and console. I tried adding the control to the Toolbox using Tools > Choose Toolbox Items... but it never shows up after I browse to
the Microsoft.ReportViewer.WinForms.dll file and select it. I manually typed 'Microsoft.Reporting.WinForms.ReportViewer' and the intellisense came up fine. But when I build the project I get the error shown in this post's title.
I'm at a complete loss. I've searched all over and tried everything I can find on the subject with no luck.
Can anybody help?
Thanks.

Thank you for taking the time.
The Report Viewer will not appear on the Toolbox, even with references to that assembly. However the Crystal Reports viewer IS in the Toolbox.
I think it may be because Crystal Reports is installed and integrated? I don't know. I just can't get it to work.
Thanks again.
Hello,
From
ReportViewer Controls (Visual Studio), we could get that ReportViewer Controls are included in VS2013, that means we don't need to install that control manually.
To confirm whether this issue is related to your Visual Studio or Crystal Reports, I would recommend you consider testing it with the following ways.
1. Create a simple windows form application, and open a form designer window, and check whether reportviewer is inside the tool box.
If it is available, then we could focus on your project to narrow down this issue.
If it is still missing, we could test it with #2.
2. Uninstall Crystal Reports and disable all add-ins of VS2013, and if possible, you could also uninstall and reinstall VS2013 to make sure the environment is clean enough. Next repeat the steps of #1.
It will be much helpful if you could share the detailed results with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Report painter report does not exist after applying support pack

Hi,
I have created report with the help of report painter for FI.
Also created transaction code for the same.
After applying the support pack, while testing I got the error that
program in the transaction code does not exists.
How to search that program and where or I need to create the same program again?
Thanx in advance.
-Umesh

The reason could be having (1) invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
Either way, go to t-code GRR2 to change the report.
In the report row or column, is there an Element (the labels in red color) that does not make sense?
It could still have the correct label names, but double-click and go into "Record Types (from your error message)". Be sure to have the correctly define values attached to each Characteristics.
If all above seems okay, try (From top bar, select) Edit --> General Data Section. Think of this section as the "header data" of the report.
Good luck
AY

Move Crystal Reports 10 Registration To A New Machine

Is there a way to deregister a Crystal Key Code to transfer the application to a new PC and reregister?

Hello,
yes this is possible.
You can get the keycode from the registry searching for HKLM/software/Crystal Reports and use this on the new machine.
Best regards
Falk

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Crystal report 2008 on a 64 bits machine

My company would like to develop a new .Net application which produce and view
some rountine crystal report on a 64-bits machine.
At the same time, this machine will also install a stand alone full product crystal report
2008 which allow to develope some adhoc report.
I would like to ask whether the full product crystal report 2008 can install and
run perfectly on a 64 bits machine. Do I need to have any special configuration during
or after installation?
On the other hand, I observe that the crystal report 2008 with service pack 0 can
support 64 bits. Is it true that the evaluation copy of crystal report 2008
on official site is that version and I can evaluate it on a 64 bits machine ?
Ricky

Hi Ricky,
The full product Crystal Report 2008 can be installed and can run perfectly on a 64 bits machine.
Hardware Support
u2022 Crystal Reports® is supported running on 32-bit versions of Windows running on x86 and x64 CPUs made by AMD and Intel.
u2022 Crystal Reports® is supported running on 64-bit versions of Windows running on x64 CPUs made by AMD and Intel.
You can download the Crystal Report 2008 with Service Pack 0, evaluation copy from official site and can evaluate on a 64 bits machine.
http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR2008
Hope this resolves your issue.
Regards,
Abhijeet T

Crystal Report does not run through NWBC

Hi All,
I have been going through posts on SDN all day and I cannot seem to get a resolution to my issue as yet.
Workflow is this
Logon onto NWBC 3.0
Click on Crystal Report. Crystal report contains an OpenDocument URL specified as follows:
http://<servername>:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AbFjYgXfkO5AofAAPxoxOyA&sIDType=CUID
When click on the Crystal REport link, i am SSO'd onto SAP BusinessObjects Infoview (Edge 3.1 SP3)
The Crystal Report attempts to load and then I encounter the following message:
Error
The database logon information for this report is either incomplete or incorrect.
SSO with SAP Authenication is enabled for SAP BusienssObjects.
Server-side Trust, etc has been set-up on the SAP Side
All steps were followed from the SAP BusinessObjects XI Integration for SAP Solutions Installation and Admin Guide.
For the Crystal Report itself, within the CMC, for the Database Configuration i set it to 'Use SSO context for database logon'.
Also the the Data Source is using FQDN for everything.
I am at a loss as to why the SSO is not working to refresh the Crystal Report.
Any ideas on what to check next would be very much appreciated.
Also, the report I am trying to run from within NWBC, contains a dynamic prompt, that uses a BV layer to populate it. The LOV is scheduled to refresh every morning. Dont know if that is causing the issue or not.
Thanks,
Ainsley
Edited by: Ainsley O'Sullivan on Oct 27, 2011 7:57 AM

Hi Ingo,
Thank you for your reply.
Why has server side trust been setup on the SAP side ?
I am not sure why Server Side Trust has been set-up on the server side. The basis person who set that up was following the BusinessObjects XI Integration for SAP Solutions Installation and Administration Guide. We thought we needed this in order for SSO to work between NWBC and BusinessObjects. I read now it is only required for multi-pass report bursting.
We have also set up the PSE as well.
So...perhaps an impersonation-style logon is happening on the SAP side because we have set up SNC?
What do we do to undo this from a BusinessObjects server perspective? We have downloaded all the Cryptographic Libraries, set them up on the SAP and BusinessObjects servers.
I will discuss this further with the basis person.
All involved URLs and server names have been fully qualified ?
Yes, everything is fully qualified.
NWBC has been configured to issue a SAP logon token ?
I am not sure. Where is the documentation on how to configure NWBC to issue a logon token? Should I be pointing my basis resource to look at the NWBC Documentation, Section 7.3 Logon Tickets?
OpenDocument has been configured to use SAP authentication by default and to accept Logon token ?
Yes, everything from a BusinessObjects server perspective has been configured. The web.xmls for InfoView and OpenDocument have been configured for sso with sap.
In the CMC, SAP Authentication has been set-up and works a treat.
It seems to me the SAP side, ie. NWBC needs more work.
Just find it hard to get a clear, step by step process on how to set-up NWBC to work with BusinessObjects. There is an abundance of documentation, but sometimes not a clear cut, step by step guide.
Ingo I bought your book the other day too, Integrating SAP BusinessObjects 3.1 Tools with SAP Netweaver. I really liked it because it is clear what you need to do. Perhaps another one could be written or another section added to this book that talks about NWBC and embedding BusinessObjects reports within it?
Thanks again.
Cheers,
Ainsley

Crystal report does not show any output

Hi
The client runs crystal report and on the crystal viewer no out put is retrieved. basically The page shows as gray colour. Its like as if there is no report to run. No error message is also received
However when you print the report it prints fine with all the details on the report
The user has full rights to the crystal reports folder as well
All users can run the crystal reports fine except for one user
Any possible solutions?
Thank you
KInd Regards
Apsara

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Index mentioned in AWR Report does not exist in the database

Hi,
I have a situation where the index object mentioned in the AWR Report is not present in the database. The object has not been dropped, is not present in the recyclebin either. The object name is mentioned as PK1_IDX in the report. The object with the name PK_IDX is present in the database. Any ideas?
Thanks
Charles

Xtreme wrote:
Hi,
Please let me add additional information.
The AWR Report section Segments by Physical Reads shows that a particular index object shown up in report as PK1_IDX has 72% of physical reads.
But the index object PK1_IDX is not present in the database
The index object with the name PK_IDX is present in the database.
SQL> select object_name,object_type,last_ddl_time from dba_objects where object_name like '%PK_IDX%';
OBJECT_NAME OBJECT_TYPE LAST_DDL_
PK_IDX 09-DEC-08
Does oracle create indexes at runtime with a names as PK1_IDX during execution?No, not a thing that I know of. As I said, can you trace the query ans see if its truly using that said index?
Aman....

Crystal Reports addon client installation

When I try to install de add-on in customer machine an error appear that the exe installation file of crystal reports does not exist, In the server there is not a problem only with the client workstation
Mauricio Rodriguez

Hi, Mauricio
Related to your doubt, the problem appears in different clients.
I know this requiere a specific solution but in order to solve the problem I have removed the Crystal add-on and registered it again from the local direction C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR
The next time that you will conect the client the message will not appear.
This is a temporal solution while we can find a definitive. If you know something I will appeciated a lot.
Regards,
Manuel

Crystal report does;t exist in my machine

Similar Messages

Maybe you are looking for