Crystal Report en Sap Portal

I can make an independent report from crystal report on the website of sap, making only link to the url?
Thanks and Regards
Edited by: Diego Trettel on Oct 13, 2008 10:12 AM

hi,
not 100% what you looking for but in case you want to leverage the viewing of a Crystal Report inside a web application you can do that with an application that is called OpenDocument and it is partof our BusinessObjects Enterprise platform
Ingo

Similar Messages

  • How to print Crystal Report within SAP Portal iView?

    Hi All,
    We are using BOEJ XI 3.0 with integration with SAP NetWeaver Portal.  We are having a problem with printing a Crystal Report.
    - We use the SAP iView to run a Crystal Report.
    - Once the report is completed, we want to click on Print to send the report to a printer e.g. default printer.
    - Then a screen pops up and nothing gets printed.
    It seems the print control is not being transferred.
    Has anyone had this problem and what the resolution is?
    Thanks,
    Garry

    Hi Ingo,
    Thank you for your response.  I have just got off the phone with SAP.  I was given two options.
    - Install ActiveX control on user's PC
    - Or set the user preference to use PDF in InfoView.
    Both options seem to work.  Now it is the question of security on using ActiveX.  If this is the concern, then one can use the PDF option.
    Hope this helps.
    Regards,
    Garry

  • Publish Crystal Reports to SAP NetWeaver Portal

    We are trying to publish Crystal Reports to SAP NetWeaver Portal.  So far we found that we always have to save to BusinessObjects Enterprise first, and then we found the ID from Crystal Reports in the InfoView.  After that, we put that ID in our iView using PAR template.  Here are our questions:
    (1) After we save Crystal Reports to BW server, how can we run that report from BW without saving to BusinesObjects Enterprise?
    (2) Can we directly publish Crystal Reports to SAP NetWeaver Portal without saving to BusinessObjects Enterprise first?
    Thanks a lot for your answers!
    Paul

    Thanks for the answers. From your answer, I believe what you are trying to say is that we need to save Crystal Reports to BusinessObjects Enterprise no matter what. We need to save Crystal Reports to BOE first, and then we need to have BOE in order to run Crsytal Reports.
    >> Yes
    Then we can publish our Crystal Reports saved in BOE to iVew in SAP NetWeaver Portal. Wether we save Crytal Reports to BW is not necesary.
    > correct. That is your choice but remember that saving to BW does come with benefits such as an integration into transports.
    This also means that we cannot just create Crystal Reports, save it to BW, publish it to SAP NetWeaver Portal, and run it from SAP NetWeaver Portal w/o BOE. Please correct me if I am wrong
    >> correct
    Ingo

  • Crystal Reports and SAP BO XI 3.1 License purshase

    Dear Professionals,
    My company is looking forward to go for Crystal Reports 2008 from BEx.
    I am looking for link for purchasing license for Crystal Reports and SAP BO XI 3.1 as well.
    Besides the above, i am currently working on a free trial version of Crystal Reportds and also installed Crystal Viewer to publish the reports on the portal, but it was asking for Java Connector license key.
    So, in addition to the above i also want to know the pricing for License of Javas Connector (JCo)
    Your help is appreciated.

    Hi
    the Java connector is available here
    service.sap.com/connectors
    Regarding licenses and pricing I would recommend to contact your local SAP sales office.
    Regards
    Stratos

  • Error while 'Crystal Report for Sap Business One' addon started

    Hi,
    I have try to install Crystal Report for Sap Business One (Addon Versione number 2.0.0.7).
    The installatione finish succesfully, but when I started the addOn i retrieve this errore message: External Connection to the dataBase failed. Sap Crystal Addon may not function properly. Please re-run the account setup with superuser login.
    I'm logged in Sap with manager (super user), so maybe I have forgot some step in the installation?
    I have see the Demo in the Channel Partner Portal, I have note that I have to isntall the CR_Runtime_12_0, but I don't find it, I don't know where I can download this file. I have just installed SapCrystalSetup.exe and registered the Addon like a normal Sap B1 addon.
    Where is the error??
    Regards
    Marco

    You must configure in each cliente Pc the connection with the DATABASE.
    You must Know the Database Super User (In SQL Server usually sa, and its password, the standard form SAP Business One is SAPB1Admin)
    In Administration > Crystal Reports Administration > Account Setup
    The CR_Runtime_12_0 is only necesary to view reports, but isn't necesary to start de addon.

  • How to Refer WebI Report in SAP Portal

    Hi Experts,
    I want to show one of the report created in Web Intelligence rich client  in SAP portal. I have done the SSO part and imported the par files and changed the configuration in web.xml  as per the documentation.
    Now ! I have developed the report and it is available in my local machine in UserDocs folder. How can i refer this report in SAP portal now. What r the parameters i should provide ?
    I have created the BO Iview in portal by selecting the BO Iview template, but couldn't understand what parameters to provide and how to refer my report which is there in my local machine.
    regards,
    Suresh

    Hi Ingo,
    Please check the below details which i configured.
    First step : transporting "par" files and epa files into portal.
    imported   "com.businessobjects.pct.sap_pik.epa" file in portal
             deployed  "com.businessobjects.pct.masteriview.par"  in portal
             deployed "BusinessObjectsKM.par" in portal
    Second step Created System Object and its parameters:
    Host name of Crystal Enterprise Server : almboxi31.ho.almarai.com:8080
            Path of Crystal Enterprise Server           : /SAP
            Protocal of Crystol Enterprise Server     : http
    Third step creating Iview
    Iview Template                 : Integration Kit for SAP Iview
            Viewer Application page : reportView.do
            BusinessObjects Enterprise Viewer : html_frame
            Application Parameters      : cms_name=almboxi31.ho.almarai.com:6400
           BusinessObjects Enterprise Report ID : 1665
           BusinessObjects Enterprise Report Type: id
    Are these correct ?
    Since my sap domain and BO domain are different , i made session management alert to off. 
    anything else do we need to do ?
    Regards,
    Suresh

  • Crystal Reports and SAP BW 7

    Hi,
    I have been reading these posts and got bit confused.
    What do I need to integrate Crystal Reports and SAP BW 7 without BOE. My company has SAP NW license and Crystal Reports Enterprise license and plan to use CR for formatted reporting. Do I still need integration kit into SAP BW in order to create crystal reports on BEx queries and save into BW and view through the SAP NW Portal?
    Or am I fine without integration kit?
    many thanks

    Based on the below Ingo's blog in BI expert we would only need the following:
    You must install Crystal Reports Designer on the client
    You must install the client components for the BusinessObjects Integration Kit for SAP Solutions
    You must install an SAP front end with the SAP NetWeaver BI 7.X Add-On and the SAP BW 3.5 Add-On components on the client when using the connectivity on top of SAP NetWeaver BI
    Users need to have the necessary authorizations in the SAP system. For SAP NetWeaver BI, this means that users require the authorizations to view and execute BI queries. There are additional authorizations for SAP ERP access in authorizations class ZSSI that are specific to the connectivity that BusinessObjects provides.
    You must release the BI queries that you want to use with Crystal Reports for external access. You can set this property in the BI Query Designer.
    So, no mention of BOE.
    http://www.bi-expertonline.com/article.cfm?id=3666

  • How to add/create additional page in Crystal Report Layout SAP B1

    Hi,
    I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
    I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
    Pls help me to find the solution.
    Br,
    Thomas Marsetyo

    Hi,
    In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
    If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
         Check this Link
    http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
    http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
    Regards,
    Manish

  • Print Preview using crystal report in SAP B1 slow.

    Dear all,
    I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
    Thanks in advance
    bodhi86

    Hello,
    How do you answered to this question ?
    Malika
    Edited by: Malika Sanoune on May 13, 2011 1:48 PM

  • Error when saving Crystal Report  to SAP BW (via SAP toolbar)

    Dear Experts -
    Our landscape is:
    Backend - SAP BW7.4 with Service pack 5
    Crystal Version - Crystal Reports 2013 SP1 Patch 6
    Business Objects - SAP BI 4.1 SP1 Patch 6
    I'm trying to save a crystal report to SAP BW via the toolbar option, but the attached error is being returned.
    Also, if I try to create a new report from BW, an error is thrown.  'An error occurred while generating a new report template; No error'.
    Any feedback/pointers would be valuable.
    Regards,
    Tarun.

    I realize this post is a few months old, but did S. B. O. Shell Business One get this issue cleared up by installing the BW transports mentioned in Josh's reply?  I'm interested in knowing whether this was resolved as we are receiving the same error as the one shown in the initial post.
    Regards,
    Chris

  • Problem opening Crystal Report from SAP GUI through VPN

    Hi Everyone,
      I am facing an issue with opening the crystal report from SAP BW Role menu(SAP GUI). The issue is only with the BW Users who are connecting to the Client systems through VPN. All the settings are done perfectly in the Transaction /CRYSTAL/RPTADMIN and SICF for the CE_URL.
    For those who are in the client network it works fine. Please see the URLs generated in both the cases,below.
    From Client N/W
    [http://sapbobj:8080/SAP/jsp/Action_Dispatch/dispatch.jsp?sap_client=100&cmsname=sapbobj:6400&language=EN&sap_sysid=D40&bw_id=4HUFYJ3XBZ7QLP5HIDYPR7PR6&sap-client=100&actionName=SAP_CrystalReport_View&appKind=InfoView&service=%2FInfoViewApp%2Fcommon%2FappService.do&loc=&initialFolderId=null]
    Through VPN
    [http://sapbwd.abc.com:8100/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4HUPI3I78CG4S4EDH7XSDP736&sap_sysid=(sysid)&sap_client=100&language=EN&sap-client=100]
    where "sapbobj" is the BOBJ system and "sapbwd" is the SAP BW Dev box.
    For me it seems to be something related to the N/W. Please provide me your valuable inputs to solve this issue.
    Thanks in Advance,
    Koka M
    Edited by: Madan Koka on May 19, 2010 5:18 PM

    Hi,
    I'm also facing the same issue. when try to open my report the URL doesn;t taking "bw_id".
    It is blank for all transported reports.
    Any advice..
    Thanks,
    Jothi

  • Print preview using crystal report in SAP B1 is very slow.

    Dear all,
    I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form  and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
    Thanks in advance
    Kamlesh Naware

    Hi,
    Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
    Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
    also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
    Thanks
    Kevin
    Edited by: Kevin Shah on May 27, 2011 4:21 PM

  • How to generate crystal report in sap application

    hi,,
    i  want to  generate crystal report  through sap application...
    How  is it possible ....?
    could you help me  in details?
    Plz  help me???????????

    STEP 1: Like any other add-on project, refer SBO UI and DI COM to your project. Initialize SBO APPLICATION object and SBO COMPANY object and listen to events. (This is standard add-on project steps)
    STEP 2: Add a Dataset to the project. This is used as a data source to your Crystal Reports. (For more information on this search for Push Technique Crystal Reports)
    STEP 3: Add a Windows Form to your Project.
    STEP 4: Add a Crystal Report Control to it.
    STEP 5: Design report based on dataset added above.
    STEP 6: Launch this Form with required parameters and selection criteria when any even happens.
    Remember there is lot stuff available on net if you search with PUSH TECHNIQUE CRYSTAL REPORT. SAP SDN has lot answers for adding Crystal Reports integration to SAP Business One Add-On.
    HTH
    B Ravi Shankar

  • Crystal report for sap business one problem

    Hi experts,
    I am facing problem while dealing with crystal report 2011.
    I installed sap b1 8.8 pl 10, then upgraded to pl 20. Now again upgraded to 9.0 pl08. Then i installed SAP Crystal Report for SAP Business One 2011.
    I seems that it is not integrated to SAP Business One, because i am not able to save my crystal layouts in sap business one.
    How can i resolve this issue, please let me know if anyone faced same kind of problem and got solution for that.
    Thanks

    Hi
    1758302 - Error while connecting to Crystal
    1397692 - Error when starting Crystal Reports software
    Thanks
    Mohammad Imran

  • Connecting Crystal Reports to SAP BW BEx query

    Post Author: mfrank
    CA Forum: Data Connectivity and SQL
    We have used Crystal Enterprise 8.5 to connect to an SAP BW BEx query in the past, however we are having some difficulties.  Rather than trying to upgrade our old CE system, I've been told that we should be able to connect Crystal Reports (2008?) directly to the BW BEx query.  I've been trying to accomplish this, but can't seem to find any drivers that will allow the connectivity.  When I try to set up a connection using OLAP, the only two options listed are Hyperion and Microsoft OLAP.  I have an old version of Brio Query (now Hyperion, now Oracle) that does show up with a driver for BW, but this doesn't show up in my Crystal options.
    Can someone give me some advice as to how to connect Crystal Reports to SAP BW?  I realize there are licensing issues with running live data without using Crystal Enterprise (or later BO products), but I'm just looking to print a report to a PDF.
    Thanks

    Post Author: A Kumar
    CA Forum: Data Connectivity and SQL
    Hi mfrank,
    I am also facing a similar kind of a problem. Did you get any solution to your problem. If yes, kindly let me know.
    Thanks
    A kumar

Maybe you are looking for

  • Form Error Message: Invalid relation attribute on pageSet xfa

    Hi, I've developed a form that many folks are using without any issues. However, I do have a small number of users that get the following error message when opening the form. Error Message:  Invalid relation attribute on pageSet xfa[0].template[0].fo

  • Asset and cost centre

    hi,how can i create my own asset and cost centres?

  • ASP DCOM CONNECTOR XI

    I all, We've an ASP application wich uses a DCOM Connector to call SAP R/3 RFCs (in a synchronous way, and receiving parameters). We need to use XI instead DCOM Connector for the communication with R/3. How can we do this? Do we need first to migrate

  • Where O Where is the user manual for the 3310?

    I have the install guide but can't seem to find the manual so I can set http and other stuff. thanks Gary

  • How to query wss_logging DB

    Hi, I've a site with a lot of sub site and i'd like to do some query in the table RequestUsage to retrieve the pages consulted by user, site the pages edited by user , site Pages deleted, ... I don't know which table, which filter use Thanks