Crystal Report error trying to retrieve data from a user table

Hi,
I'm making crystal report application with VS 2005 and I need to retrieve data form a user table. I'm using Pull method, I configure the connection and parameters by code.
I think that the problem could be the @ that is used to identify these tables. Please, if some body had this problem before and have a solution, please let me know asap.
Thanks

Hi Andrea,
I had the same problem today. I upgraded from Crystal Version 8 to 11 and the problem was solved. Maybe it is too late for you, but I wanted to post the solution if anybody else has the same problem.
Regards
Guillermo

Similar Messages

  • Report error "Failed to retrieve data from the database."

    Post Author: tknorst
    CA Forum: .NET
    I have an application using CR XI R2, and on certain users computers when they try to run a report they get the following error:
    Failed to retrieve data from the database.Details: [Database Vendor Code: 229]Failed to retrieve data from the database.Error in File C:\DOCUME1\turkj\LOCALS1\Temp\WhseEmpJobAndActivityByUserAndDate {22DA2F53-4391-4307-9F2A-0E3C3EBE2198A}.rpt
    The report uses SQLOLEDB (ADO) and integrated authentication - it runs fine on the development machine.
    I found very little info on this error on the web (google) - so I hope someone here has an idea.

    You need to make sure that those systems can get conneted to the database that is supposed to return data. To check that create a udl in clients machine.
    Also do not change the schema of he report.

  • Error while trying to retrieve data from BW BEx query

    The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
    In BEx report there is a limitation but is it also a limitation in Webi report.
    Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

    Hi,
    That warning / error message will be coming from the MDX interface on the BW server.  It does not originate from BOBJ.
    This question would be better asked to support component BW-BEX-OT-MDX
    Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
    Regards,
    Henry

  • Error:Failed to retrieve data from database [Vendor Code:3001]

    Hello FOlks am trying to run a crystal report but when i try to run it somehow returns this error i.e [Error:Failed to retrieve data from database [Vendor Code:3001], I have no clue wats happening with this.Can anybody please throw some light on this.Am providing the sql behind this report for reference.
    SELECT "CLIENT"."CLIENT_NAME",
            "RECOVERY"."AMOUNT",
            "RECOVERY"."RECOVERY_TRANSACTION_INTERNAL",
            "RECOVERY"."ALLOCATION_CHECK_AMOUNT",
            "RECOVERY"."RECOVERY_DATE"
       FROM "HRI1_OWNER"."CLIENT""CLIENT",
            "HRI1_OWNER"."EVENT_CASE""EVENT_CASE",
            "HRI1_OWNER"."SETTLEMENT""SETTLEMENT",
            "HRI1_OWNER"."RECOVERY""RECOVERY"
      WHERE "CLIENT"."CLIENT_ID" = "EVENT_CASE"."CLIENT_ID"
        AND "EVENT_CASE"."EVENT_CASE_ID" = "SETTLEMENT"."EVENT_CASE_ID"
        AND "SETTLEMENT"."SETTLEMENT_ID" = "RECOVERY"."SETTLEMENT_ID"
        AND "CLIENT"."CLIENT_CODE" <> 'CLIENT  1'
        AND "CLIENT"."MAJOR_CLIENT_ID" in
            (Select major_client_id
               from major_client
              where major_client_code in ('LA', 'PFG'))
      ORDER BY "CLIENT"."CLIENT_NAME"Edited by: user11961230 on Nov 12, 2009 6:57 AM

    @oradba:Hi Thanks for getting bak. Well i have ran the query using PL/SQL Developer tool and yes its mapping to ORA-03001:unimplemented feature. i dont know what the problem is.
    @centinul: well i dont have any views in there.but still cudnt figure out why its throwing tht error
    Thanks
    Edited by: user11961230 on Nov 12, 2009 7:12 AM

  • Error :Unable to retrieve data from iHTML servlet for Request2 request

    I open bqyfile to use HTML in workspace.
    When I export report to excel in IR report.
    Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
    And I can not open any bqyfiles in workspace.
    Anybody gat the same question? Thanks~

    Hi,
    This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
    http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
    Hope this helps..

  • TCP packet out of state: First packet isn't SYN & Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]

    We are transitioning from Exchange 2003 to Exchange 2010.  We found Outlook online mode (non-cached mode) have many warning "Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]", usually happen when users tried to open
    address book but sometimes even normal operation like click the Send button.  The problem does not affect OWA and extremely rare when Outlook is running in cached mode.  Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops.
    We have a lot from the CAS/HT to DC/GC on TCP_3268 and LDAP.  And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK.
    We also have a lot from CAS/HT to the Outlook Clients on the static RPC port (TCP_59933).   And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK and RST-ACK, ACK.
    This happens even on Outlook 2010 which I though it has TCP Keep Alive implmented to keep the session active within 1 hour. 
    Can somebody tell me if these out-of-state are the cause of our problem?  And how to fix it?
    THANK 1,000,000

    Hello AndyHWC,
    I did some consulting with our CAS team and received the following feedback to your post:
    It is difficult to determine what is causing resets without seeing the captures first hand however, the concern is that you are seeing dropped packets on the firewall logs.  Where is this firewall located?
    Based on the description "Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops." and "We have a lot from the CAS/HT to DC/GC on TCP_3268 and
    LDAP." indicates to me that the firewall is between CAS and GC.  This not supported under any circumstances and would explain the issue they are seeing with clients trying to "retrieve data from the GC".
    If there is not a firewall between the GC and CAS then a Microsoft support engineer would need to have concurrent Netmon Captures from client, CAS, GC during the
    issue to analyze.  If only one GC exists consider adding another GC to handle the client requests and for fault tolerance.
    Also verify that all NIC card drivers are updated to the latest driver version
    More information about firewalls with Exchange 2007/2010
    http://msexchangeteam.com/archive/2009/10/21/452929.aspx
    http://technet.microsoft.com/en-us/library/bb232184(EXCHG.80).aspx
    You can install the Client Access server role on an Exchange 2007 computer that is running any other server roles except for the Edge Transport server role. You
    cannot install the Client Access server role on a computer that is installed in a cluster. Installation of a Client Access server in a perimeter network is not supported.
    http://technet.microsoft.com/en-us/library/dd577077(EXCHG.80).aspx
    “The Installation of a Client Access Server in a Perimeter Network Is Not Supported
    Issue You may want to install an Exchange 2007 Client Access server in a perimeter network. However, this type of installation is not supported in Exchange
    2007.
    Cause The Exchange 2007 Client Access server role is not supported in any configuration in which a firewall is located between the Client Access server
    and a Mailbox server or a domain controller. This includes firewall devices, firewall programs, or any program or device that is designed to restrict traffic between two network locations.
    For correct operation, Client Access servers require typical domain connectivity to domain controllers and global catalog servers. Because any devices
    or programs that restrict or reduce access to domain controllers or global catalog servers may affect the correct operation of the Client Access server, we do not support this type of configuration.
    Resolution To resolve this issue, move the Client Access servers to the internal network. For more information about the ports that Exchange 2007 uses
    for various services, see Data Path Security Reference.”
    Thanks,
    Kevin Ca - MSFT
    Kevin Ca - MSFT

  • Error while retrieving data from PL/SQL Table using SELECT st. (Urgent!!!)

    Hi Friends,
    I am using Oracle 8.1.6 Server, & facing problems while retrieving data from a PL/SQL Table:
    CREATE or REPLACE PROCEDURE test_proc IS
    TYPE tP2 is TABLE of varchar2(10); --declared a collection
    dt2 tP2 := tP2('a','b','c');
    i NUMBER(8);
    begin
    SELECT COUNT(*) INTO i FROM TABLE(CAST(dt2 as tP2));
    DBMS_OUTPUT.PUT_LINE('**'||i);
    end;
    While executing the above procedure, I encountered foll. error:
    ERROR at line 1:
    ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [],
    ORA-06544: PL/SQL: internal error, arguments: [pfrrun.c:pfrbnd1()], [], [], [], [], [], [], []
    ORA-06553: PLS-801: internal error [0]
    Can anyone please help me, where the problem is??
    Is it Possible to retrieve data from PL/SQL TABLE using SELECT statement? & How ?
    Thanks in advance.
    Best Regards,
    Jay Raval.

    Thanks Roger for the Update.
    It means that have to first CREATE TYPE .. TABLE in database then only I can fire a Select statement on that TYPE.
    Actually I wanted to fire a Select statement on the TABLE TYPE, defined & declared in PLSQL stored procedure using DECLARE TYPE .. TABLE & not using CREATE TYPE .. TABLE.
    I was eager to know this, because my organization is reluctant in using CREATE TYPE .. TABLE defined in the database, so I was looking out for another alternative to access PL/SQL TABLE using Select statement without defining it database. It would have been good if I could access a PLSQL TABLE using Select statement Declared locally in the stored procedure.
    Can I summarize that to access a PL/SQL TABLE using SELECT statement, I have to first CREATE TYPE .. TABLE?
    If someone have any other idea on this, please do let me know.
    Thanks a lot for all help.
    Best Regards,
    Jay Raval.
    You have to define a database type...
    create type tP2 is table of varchar2(10)
    CREATE OR REPLACE PROCEDURE TEST_PROC
    IS
    dt2 tP2 := tP2('a','b','c');
    i NUMBER(8);
    begin
    SELECT COUNT(*) INTO i FROM TABLE(CAST (dt2 AS tP2));
    DBMS_OUTPUT.PUT_LINE('**'||i);
    end;
    This will work.
    Roger

  • Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

    I have set-up an ECT in SPD2013 on SP2013.  It is a SQL Data source called ProjectWebApp.   I have BCS/SSS set-up.  I can create an ECT OK in SPD.  I can add the ECT to a custom list.
    The problem is when I add a new item in the list the following error message appears in red
    An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
    I cannot filter or return any results.  There is data in the DB.
    Another test I do is to try and create a new App/List using the "External List" template.  When
    I select the ECT a red message appears "External Content Types are not available".  which is odd since I can add an ECT to a list as mentioned above.
    Any ideas?
    Tx
    Andrew
    Andrew Payze

    Hi Andrew,
    Please try the option Allow unlimited length in document libraries in the column settings:
    http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
    If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
    http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
    Please provide error message in ULS log for further troubleshooting.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Retrieve data from a large table from ORACLE 10g

    I am working with a Microsoft Visual Studio Project that requires to retrieve data from a large table from Oracle 10g database and export the data into the hard drive.
    The problem here is that I am not able to connect to the database directly because of license issue but I can use a third party API to retrieve data from the database. This API has sufficient previllege/license permission on to the database to perform retrieval of data. So, I am not able to use DTS/SSIS or other tool to import data from the database directly connecting to it.
    Here my approach is...first retrieve the data using the API into a .net DataTable and then dump the records from it into the hard drive in a specific format (might be in Excel file/ another SQL server database).
    When I try to retrieve the data from a large table having over 13 lacs records (3-4 GB) in a data table using the visual studio project, I get an Out of memory exception.
    But is there any better way to retrieve the records chunk by chunk and do the export without loosing the state of the data in the table?
    Any help on this problem will be highly appriciated.
    Thanks in advance...
    -Jahedur Rahman
    Edited by: Jahedur on May 16, 2010 11:42 PM

    Girish...Thanks for your reply...But I am sorry for the confusions. Let me explain that...
    1."export the data into another media into the hard drive."
    What does it mean by this line i.e. another media into hard drive???
    ANS: Sorry...I just want to write the data in a file or in a table in SQL server database.
    2."I am not able to connect to the database directly because of license issue"
    huh?? I never heard this question that a user is not able to connect the db because of license. What error / message you are getting?
    ANS: My company uses a 3rd party application that uses ORACLE 10g. And my compnay is licensed to use the 3rd party application (APP+Database is a package) and did not purchased ORACLE license to use directly. So I will not connect to the database directly.
    3.I am not sure which API is you are talking about, but i am running an application of the visual studio data grid or similar kind of controls; in which i can select (select query) as many rows as i needed; no issue.
    ANS: This API is provided by the 3rd party application vendor. I can pass a query to it and it returns a datatable.
    4."better way to retrieve the records chunk by chunk and do the export without loosing the state of the data in the table?"
    ANS: As I get a system error (out of memory) when I select all rows in a datatable at a time, I wanted to retrieve the data in multiple phases.
    E.g: 1 to 20,000 records in 1st phase
    20,001 to 40,000 records in 2nd phase
    40,001 to ...... records in 3nd phase
    and so on...
    Please let me know if this does not clarify your confusions... :)
    Thanks...
    -Jahedur Rahman
    Edited by: user13114507 on May 12, 2010 11:28 PM

  • Unable to retrieve data from a nested table in Oracle 8i from JSP

    How do i retrieve data from a nested table in Oracle 8i from my JSP code?
    When i try to execute the query , a general error is thrown.
    Kindly advice as soon as possible.

    How do i retrieve data from a nested table in Oracle 8i from my JSP code?
    When i try to execute the query , a general error is thrown.
    Kindly advice as soon as possible.

  • Crystal Add on Failed to retrieve data from the DB Vendor Code: 2812

    Hi everyone
    Im using Sap Business One Version 2007A SP00 PL49, SQL 2005 and Crystal Reports Basic for Sap Business One (Add on 2.0.0.7). Whenever i try to generate a report from SBO the system displays the following message "Failed to retrieve data from the database DETAILS: Database Vendor Code: 2812"
    The scenario is that, according to the Colombia's product local expert, Is not possible to create Stored Procedures, Views, Functions or anything in the customer productive database, in order to improve the performance of the query i created other DB where i created an stored procedure, after that, i called it from Crystal where it's working ok. But when i try to generate it from SBO it show the message promted.
    Someone knows what could be happening
    I'll be thankful

    Hi everyone
    My Stored Procedure contains the following code "annar.dbo.OIBT c", where Annar is the database name.
    When i execute the report in Crystal directly is working without Issues, There everything is ok, the Stored Procedure parameters, sorts, cross tab. When i try to executed it from SBO it shows the prompt error.
    The connection was OLE DB (ADO). I created an ODBC connection with the following settings
    - SQL autentication based on Id and password created by user, in this case sa
    -  "Use Identifiers between "" ANSI " and "Use Null, filled and ANSI warning " are ticked.
    - Execute character data conversion.
    Microsoft SQL Native Client Versión 09.00.1399
    Nombre del origen de datos: Bisynf
    Descripción del origen de datos: BisynfDW
    Servidor: BISYNFGER
    Usar seguridad integrada: No
    Base de datos: (Default)
    Idioma: (Default)
    Cifrado de datos: No
    Certificado de servidor de confianza: No
    Multiple Active Result Sets (MARS): No
    Realizar conversión de los datos de caracteres: Yes
    Registrar consultas de larga ejecución: No
    Estadísticas del controlador de registro: No
    Usar configuración regional: No
    Usar identificadores entrecomillados ANSI: Yes
    Usar nulos, rellenos y advertencias ANSI: Yes
    Right now with Those setting is running ok again in Crystal Reports  but when i try to execute from SBO the error has changed the error now is "connection could not be opened", Report Name in this case "Informe Stock Total" { 1D2DBDC5-41DE-43C0-A23C-391E7AEF2A37}.rpt
    Tks a lot

  • How to save, update and retrieve data from two diffrent table

    Hi,
    I can save and retrieve data into an user defined SBO form from one database table only. How can I save retrieve and update records from two or more different tables in a single screen?
    Regards,
    Sudeshna.

    Sudeshna,
    Are these tables external to SAP Business One and do not have a Business Object?  If there is a Business Object available such as if you were to enter an order, that order would use the Documents object which abstracts you, the programmer, from the underlying tables that need to be updated.  If you are handling multiple business objects you would need to wrap the transaction with the StartTransaction - EndTransaction methods.  This information is detailed in the SAP Business One SDK Help Center that comes with the SDK.
    HTH,
    Eddy

  • Error when trying to retrieve data from Essbase

    Hi There
    I running OBIEE 10.1.3.4.0 and Essbase 9.3.1. When im trying to update member count for instance(from administration tool) it gives me the following errors.
    nQSError 10058, nQSError 43093 and Essbase Error 1260046. This is when im testing against an Essbase I have developed for my self. If I try using one of the supplied sample databases it works fine...
    Does anybody have an idea about what could be wrong?
    Any pointers would be much appreciated!
    Regards, Jacob

    Hi,
    That warning / error message will be coming from the MDX interface on the BW server.  It does not originate from BOBJ.
    This question would be better asked to support component BW-BEX-OT-MDX
    Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
    Regards,
    Henry

  • Date data from Crystal Report one day less than Date from Source

    Hi,
    I am creating a Crystal Report 4.0 for Enterprise Users (Client Version only) based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Crystal Reports, it is displaying as 1 day less from the actual data. For example, in the BEx Query, 'Date' = 11/01/2011.  In Crystal Reports, it is showing up as 10/31/2011, which is one day behind.  I'm not sure what's going on.
    Please help!

    Well, this is as weird as it gets!
    Here are the observations on SP02:
    1) The Date Characteristic is a day off in the report while the 'Key' shows correct date
    2) It displays in the '30.01.2011' (DD.MM.YYYY)format
    3) When you right-click this field to change the date format, the date option is missing
    4) You create a formula to see if this is a date and it returns True. The formula you can try is :
    isdate(). It returns False for any other function like isnumeric() etc
    5) So, this is a date filed, or CR4E thinks this is a date field, however doesn't let us change the format
    6) You cannot use this field with date functions like cdate(); weird!
    7) The only way you can show it the way you want is to write this formula:
    *mid(,4,2)&"/"&left(,2)&"/"&Right(,4)*
    This is still a string field, however displays as MM/DD/YYYY.
    In Crystal Reports 2011, however, the following formula on the same date field returns a date value, meaning you can further right-click this formula field to change the date format like a normal date field:
    cdate(tonumber(Right(,4)),tonumber(mid(,4,2)),tonumber(left(,2)))*
    The same formula, however, throws a 'String is non-numeric error in CR4E and I found that it doesn't like this:
    *tonumber(Right(,4)) ; same error
    I've tried a lot of combinations to make this a date field in CR4E, however none works!
    So, the only option is to use the formula that I mentioned above.
    P.S: If you install Patch 2.10, you'll notice that the Characteristic value shows the correct date. For some reason though, it is in the same format as the 'Key' and if we wish to change the date format, the only possible workaround is to extract the numbers and join like I suggested above.
    Hope this helps!
    -Abhilash

  • Trying to retrieve data from a dead computer.

    The computer is a 1.25Ghz PowerBook G4 (about 5 years old) running 10.3.9.
    The computer crashed and will not start. It reaches the apple logo with the rotating meter, but will then sit there pretty much as long as I'm willing to wait (more than an hour at least).
    The last time this happened I used disk utility on the restore disk to repair the permissions, which solved the problem. However, this time it hasn't. The permissions were repaired successfully, but the computer still will not start. I then tried running the disk verify and found several errors, however, when running the disk repair, it immediately hits an error and stops. Now it won't even verify the disk without getting an error.
    Next I tried just reinstalling the system software (without erasing the disk). It completes the disk verify, but then errors right at the start of the install.
    I would be willing to just erase the disk, but my wife has pics of our daughter on the computer that haven't been backed up yet and she doesn't want to lose them.
    I have tried using the Target Disk option, but the PowerBook's HD took about 5 minutes to mount and then I was not able to read anything from it. The computer I connected to just sat there "thinking" for about 15 minutes. I'm guessing the PowerBook crashed because the Firewire symbol stopped floating on the screen as soon the disk mounted. I tried it twice with the same result.
    I have also tried installing the system software to both USB 2.0 and Firewire 400 external hard drives and the installer tells me it cannot install to that drive.
    The computer does suffer from a fried RAM slot (occured about 2.5 years ago and it has never been as stable since) and a fried logic board fan.
    Anyhow, then question is, is there anything else I can try? Is the Hard Drive fried? Can the data be retrieved without advanced super computers and a multi-million dollar budget?
    Thanks

    hobbie2k:
    I suspect the the internal HDD of your PowerBook G4 has died. The average life of these drives is 3 to 5 years, so you got about as much from it as you could reasonably expect. A new HDD should revive the computer.
    As to the files you are trying to retrieve, if you plan to replace the HDD, you can place it in an external firewire enclosure after it has been removed and connect it to a working computer, download a demo version of DataRescue II, mentioned by Limnos, and see if any of the files you want to rescue are visible. If you see them you will have to purchase the license to be able to complete the process. Dr. Smoke's FAQ Data Recovery is a good resource for this procedure.
    cornelius

Maybe you are looking for