Crystal Report Lines / Boxes not show in Excel

In Crystal Report 2008, I created a report with lines and boxes inserted. I then imported into SAP B1 8.8. The report looks fine in crystal report viewer with all the correct formatting. I exported the report as Ms Excel (with formatting).
After exported to Excel, the report looks fine for the most part but all the lines and boxes are not showing at all. I went back to CR designer and tried to mofify the format of the lines / boxes but they still not showing in Excel. is there any way to fix the display of those boxes and lines?

Hi,
Format like lines/Boxes cannot be exported. If you want the exact layout, print to PDF file may be your only option.
Thanks,
Gordon

Similar Messages

Crystal Reports Field Explorer not showing

Hi,
I am using Visual Studio 2003 with the bundled version of Crystal Reports. It has always worked fine until recently the Field Explorer tool bar does not show up anymore when I open a Crystal Report for development. I have uninstalled the entire Visual Studio and reinstalled the Visual Studio but it still will not show the Crystal Reports Field Explorer. However, if I install the Visual Studio on a completely different computer it works fine. Anyone have any idea what could be causing this problem on my main computer? Could it be a setting somewhere in the Visual Studio? I cannot find any information on this problem.
Thanks,
Razzle

Ok, I figured out what the problem was. It was something wrong in my Windows profile. So I deleted my Windows profile and created a new one and it is working now.
Razzle

Crystal report viewer do not show on client computer installation

hi
hope all you are fine
i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
1. CRRuntime_13_0_tr.msm 2. Microsoft_VC100_ATL_x86.msm
3. Microsoft_VC100_CRT_x86.msm
4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show.
Please Help

Hello,
For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal report default values not showing in BOE

Hi,
In Crystal Designer 2008, we can set parameters to have a default value. When we refresh the report in Designer, the default value is the one that's automatically selected. However, once we upload it to BOE, the default value is blank and we must manually re-create them in the Default Value Properties. Anyone knows why it is like that?

Hello,
Make sure you mark the items you want on Defaults inside CAC1 t-code.
You have the following options and from where are they taken of:
- Controlling area -> from IT0001
- Activity type -> from IT0315
- Purchase order -> from IT0315
- Attendance/Absence type -> directly entered in CAC1
- Master cost center -> from IT0000
- Sender business process -> from IT0315
- Service master -> from IT0315
- Cost center -> from IT0315
- Wage type -> directly entered in CAC1
Regards,
Bentow.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Crystal reports 2008 will not allow multiple exports in a row

I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report. I have a new issue. - sort of???
Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with mapi not populating the addresses field from outlook.
To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is fix for this issue?

Im not sure I agree with you designation that this report should be in the report DESIGN forum. I
My problem has nothing to do with report design in my OP. The MAPI function (in crystal reports itself) will not populate addresses once I export 1 report. When I try to export a second report that is when it quits works. This is basically the same problem that a hot fix or fix pack corrected but now instead of now working at all. I can only export 1 report before the same mapi issue happens????

The "next" button of crystal report viewer does not work

hi
I use crystal report viewer control to show my crystal report on my aspx page.
like:
<CR:CrystalReportViewer id="CRViewer" runat="server" HasRefreshButton="False" PrintMode="ActiveX" DisplayGroupTree="False"
AutoDataBind="True"
SeparatePages="TRUE"
Height="520px"
Width="900px">
</CR:CrystalReportViewer>
however when I try to navigate to next page by click "Next" arrow button on the crystal report viewer toolbar, it only can navigate to the page 2, whatever I click the "Next" button, it still stay on page 2,
actually this report has 10 pages.
On the other hand, if I input the page number, such as 5 on the "goto" textbox, it will jump to page 5 correctly.
Could you give me any good advices to solve this problem?
Thanks.

There are a few threads discussing the issue in this forum. See if these provide some guidance:
"Next Page" wont go beyond page 2 in Html Viewer (Crystal.NET for VS 2008)
Re: Crystal Reports .NET Visual Studio 2005
Problem in CrystalReportViewer
Ludek

Mail info panel top line does not show subject or from subsequent lines do.

mail info panel top line does not show subject or from, subsequent lines do.

DOrk4L,
Have you tried re-calibrating the battery? To re-calibrate it, let the battery drain completely and then charge it fully. You should see correct battery usage after that.
Hope this helps,
Jennifer B.

Powerpivot add-in menu does not show in Excel 2010

To whom it may concern,
Sometimes, excel.exe *32 is left in the windows 7 professional task manager but all excel sheets are closed (sometime VB script opens excel sheet, and then close the excel sheet); then, manually open an excel sheet 2010 with powerpivot add-in,
powerpivot add-in menu does not show in Excel 2010. If excel.exe *32 is deleted from task manager manually, then, open Excel 2010 with power-pivot add-in, the powerpivot add-in menu is always visible. Try to figure out why excel.exe *32 is still left running
in the task manager.
jianmin chen

Ed, I read your reply. I thought about closing it before, but today I still experience the same issue after I reinstall the powerpivot for Excel 2010.
I came cross powerpivot error: unable to load the table in the powerpivot windows when the excel sheet is opened, yesterday it worked fine. After I reinstall powerpivot for Excel 2010, SQL 2008, the issue goes away.
And I tried to use pivot table instead of powerpivot in Excel 2010, and then plan to write stored procedure to build some relationships used to set up in powerpivot windows; so, I am still planning to use excel sheet, instead of writing a windows form application.
Try to get more experience in excel.
jianmin chen

Crystal Reports Image box does not display images.

Post Author: xbhavesh
CA Forum: .NET
i have CR report which has a Imagebox to display images from db table. i am storing the images in a table as path. in my dev machine when i load the .aspx page with the crystal report it shows the image in the box but when i run it from the web server the image does not show.
even from the .rpt file i get the image and all data.
anyone know how can i get this working?
the images are stored in a mapped network drive and the version of cr is XI R2.

Please post to Business One forum

Could not export Crystal report from SAP B1 to MS excel

Hi Experts.
Could not Export crystal report which are created in .net crysta report to MS excel in SAP business one.
Kindly give any solution.
Thanks & Regards,
Bhushan

Hi,
Crystal reports it self u can export data from MS excel .
Regards,
Siva

Comments & multi-line text not showing up on summary report

My multi-line answers and comments are not showing up on my summary report

Hi;
The summary report does not show the text based answers. This isn't something FormsCentral supports.
If this is an important feature for you, we do have a "Feature Request" form where you can vote on popular existing ideas or add a new one of your own:
https://adobeformscentral.com/?f=XnF-KJVCovcEVQz9tZHYPQ
Thanks,
Josh

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Crystal Reports Runtime 13 not found in sequence on App-V 5.0 SP2 Hotfix 5 client

My application uses a VFS installation of Crystal Reports Runtime 13. (i.e., the path to CR13 isn't specified as the Primary directory during sequencing, as my app uses that particular path)
On a test VM with an old App-V client (5.0.285.0) the application launches and can locate CR components successfully.
However, when we upgrade to the latest App-V client (SP2 HF5) the application fails to find CR.
The original application was sequenced with App-V 5.0 RTM (5.0.285.0). I've re-sequenced the app with the latest sequencer (SP2 HF4) but the error persists.
There is literally nothing in the Event Log and the app doesn't appear to report the error to Windows (it pops up a UI message saying CR 13 can't be located).
Procmon doesn't show anything meaningful, although I could have missed something whilst trawling through 16,000 lines of processes.
I enabled all App-V logs and nothing relating to an error can be found there.
I tried disabling DEP and following other advice in this earlier thread:
virtualizing-business-objects-crystal-reports-pro-110
OS: Windows 7 SP1, patched up to date.
App-V client: 5.0.3404 (SP2 Hotfix 5)
Anyone seen an issue like this?
I'm about to open a case with Microsoft Support, just thought I'd ask here first.
Regards.

Hi.
We raised a support ticket with Microsoft and with their help, found that the path length to the VFS installation of Crystal Reports was the issue.
I created an MST (btw, Crystal Reports MSI has numerous directory and registry entries that don't use best practice, so this took a while..) to reduce the path lengths.
As to why the RTM version of the client works (from our Microsoft support engineer):
"Regarding the “why”, between RTM and the next versions, lots of issues were corrected.
In this particular situation, the issue was related with the fact that the application stopped extending the buffer. Probably what happened was that a COM or Object Bug was corrected between RTM and SP2 and this had a negative effect on the application. What
this means is that, in fact, the application was not supposed to work in RTM as well, due to buffer being extended."
So in summary, if you have an application with a particularly long path structure, you may need to re-sequence for the SP2 version of the client.

Crystal Report Toolbar images not displaying properly in IE?

Hi,
I am using VisualStudio 2012 ,crystal report version 13.0.2000.0 and sp5.
My problem is that after loading crystal report, toolbar image icons (such as print,export etc) are not showing properly in internet explorer(version ie10). But it is displaying correctly in chrome and firefox.
What could be problem ?? Any help will be appreciated ..

See this re. images:
Visual Studio 2012 Crystal Report not working on Windows Server 2012/ 0x800a1391 &#8211; JavaScript runtime error: &…
Also, don't forget to do your own searches - search box is in top right corner and simple search strings are best. E.g.; 'Crystal net red x'.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on
Twitter

Crystal Report Lines / Boxes not show in Excel

Similar Messages

Maybe you are looking for