Crystal Report not working when posting the report to the Crystal Server.

Hi All,
I created a report using Crystal Reports 2008 with two ODBC connections (User DSN's). When I run the report in Crystal Reports (where I originally created it) it runs fine with no problems.
I am now trying to load it on Crystal Server 2008. When I try to run this report in InfoView, I get a message: "Error Failed to open the connection." I am thinking that it has to do with the ODBC connections but I am not quite sure. Could someone lead me in the right direction? How will the report that I now saved in the repository on the server connect to the ODBC stream?
Thank you in advance.

Solved my problem. I had to tweak the ODBC drivers on the server.

Similar Messages

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
regards
Hemang

Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc. The more information we have about your environment will help us assist you better. But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?

i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

Crystal report not working when setup is made in VS 2010

Hi, i am new to SAP Business objetcts as well as in this forum.
I have made an application in VS 2010 (C# /WPF) and made its .exe file too.
The Crystal reports are working fine when i am running from Visual Studio.
But it gives error message while i am running the .exe.
I have made the .exe as normally we do.
Please help me out.
Regards.

Adam assumed you were using Enterprise as the thread was posted to the ".NET - SAP BusinessObjects Enterprise, SAP BusinessObjects Edge, SAP Crystal Reports Server" forum.
Since you are using WPF viewer, I'm pretty sure this is not the case.
I am not sure how you are loading the report, so a code snippet from your app will help. Also, in your code as a test, hard code the path to the report. Does that work?
Looking at the [WPF|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/a09f7025-0629-2d10-d7ae-df006a51d1a8] demo is going to be worthwhile also.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Crystal reports not working when integrated security is set to true

Hello Everybody,
I have developed 20 crystal reports. When i deploy in my development environment(asp.net) these reports are working fine.My UAT environment is using application pool connection instead of database connection.
My .net developer has written a code and he set integrated security to true for reports. My problem is reports which are having parameters not working correctly. Reports which are not having any parameters, it is working fine. If i enter parameters in asp .net page, the report is running for all the values. It is not considering the parameter values.
Thanks
Ram

Hi Ram,
Need more info, what version of CR assemblies, which OS is hosting the app and what patches, CR and OS are installed?
Have you discussed this issue with your developer? Possibly all of the runtime is not on the app server?
Thank you
Don

MS office report not working when application is compiled (application builder)

I'm finishing up an application that includes several MS office reports (opens a MS Word template). The template is opened, the bookmarks are filled, then the file is saved (to our internal network) as a .doc file. The New Report.vi is used to open the .doc file, the Print Report.vi is used to print the file, then the SMTP send file.vi is used to email the file.
Everything has been working fine then I decided to build the application for distribution. Big mistake! An installer is made. When I install the application I get "File not found" (error 7) errors each time I attempt to run this section of code. Incidentally, This app. also uses the SQL database toolset to read and write to a database. No problems with the database.
I thought it might have something to do with the Word templates being on the network. I copied everything to my local PC and built another application. Same problems.
I suspect I'm doing something wrong in the Source Files tab of the Build Application or Shared library window.
I'd really appreciate your help.
thanks,
todd

Most likely, you're looking at a path problem to the template file from the applicaiton.
When you build a VI into an applicaiton, the path to that applicaiton changes. If originally the VI that calls the template file was located "c:\app\caller.vi", after you build the executable, that same VI will now be located at "c:\app\toplevelVI.exe\caller.vi".
The executables name will now actually be a part of the path. So you may need to add an extra "Strip Path" function somewhere to get you to the real path to the Excel file. Of course this is just a guess without seeing your code. You could try going back to the LabVIEW code and add a path indicator where you are building the path, then re-build the application and run it so you can see what the path is after it's built.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Why does the "Move to new window" function that I used to use not work when I right click on the tab anymore?

It used to be when I right clicked on the tab in Firefox that I could use the "Move to new window" option. Now when I go down to that option it looks as though it is going to work, but nothing happens. The other day I changed a few options in Firefox, but I don't remember changing anything that sounded as though it would have this effect and now I can't find any options that seem to fix it. Thanks in advance for any help.

Hello Beorn, probably the problem is an extension that isn't working correct.'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
thank you

It is not working when jsp is outside of the Controller(.jpf) directory

Hello,
I am new to Portal. I am using Weblogic 8.1SP2. The problem is when there is a general jsp I want to put it common directory. It is working fine when I run starting from individual Controller but When I put its portlet in Portal, then the action is NOT falling into its caller's Controller but into the root Controller. Is this normal ? Is there a way to have the action call back to its caller Controller ? The director structure is :
../portalWeb
+ flowControllers
+ common
search.jsp
+ portlet1
Portlet1Controller.jpf
Portlet1Controller.portlet
+ portlet2
Portlet2Controller.jpf
Portlet2Controller.portlet
Controller.jpf
And in the search.jsp file I have javascript snippet code like :
if ( <%= type%> == 1 ){
document.forms0].action="startPersonSearch.do"; //Portlet1Controller action
if ( <%= type %> == 2) {
document.forms[0].action="startCompanySearch.do"; //Portlet2Controller action
document.forms[0].submit();
Please help. Any thought will be greatly appreciated.
Christina
Thanks in advance.

Yes. I did try to put directory path in front of the action to tell which Controller it should go. It didn't throw exception but It acted like called directly from that Controller. It is not under portal.
Does anyone think the approach to have the common used jsp outside the Controller feasible ?

Javascript not working when pdf is rendered in the browser IE9

I have a javascript on the initialize event of a field and it works fine when doing a Preview PDF but not when i render the PDF in the browser
if(F.Page_1.field1.rawValue == null)
F.Page_1.field1.presence = "invisible";
F.Page_1.field2.presence = "visible";
Can some one pelase help?
Thanks,
F.Page_1.field1::initialize - (JavaScript, client)

Hi,
The initialize event is supported in browsers, but the issue may be if the form is saved as a Dynamic XML Form in the save-as dialog in LC Designer. Or if you using LC Enterprise Suite to render the forms at runtime, if you have set the render in LC Designer: File > Form Properties > Defaults to Dynamic XML Form:
Changing an object's presence requires a dynamic form.
Niall

CFIMAGE not working when there is a . in the file path?

I’m trying to use CFIMAGE for the first time and running into an issue. I am guess it is because my path has a period in it but I am not sure and I am not sure how to get around it if that is indeed the problem.
I’m using ExpandPath to get the directory path but I have tried it other way with the same result. The path is
C:\Websites\mywebsite.com\www\images
I’m just trying to take a file in the C:\Websites\mywebsite.com\www\images\temp directory and resize it then rename it to the memberid with 300 on the end and save it to this directory C:\Websites\mywebsite.com\www\images\members
        <cfimage
        action = "resize"
        height = ""
        source = "#ExpandPath("..\images")#\temp\#TempFileName#"
        width = "300"
        optional
        destination = "#ExpandPath("..\images")#\members\"
        name = "#ARGUMENTS.MemberID#300"
        format = "jpg"
        overwrite = "yes">
I keep getting the folowing error.
The com\www\images\members\ image format is not supported on this operating system.
Any ideas?

was the fact that I ahd both destination and name being used
at the same time.
Using both "destination" and "name" works fine for me on windows. Though as I said, it is usually more common to use one or the other (not both).
all I did was copy and paste
from Adobe's example.
Given the fact that your code contained the word "optional", you may have inadvertently copied a usage/syntax description rather an actual code example. Most of the descriptions contain the word "optional" to separate the mandatory and optional attributes. They are just descriptions not working code. Look for the actual code examples further down in the page (usually in a mono-font like courier).

Ajax tabs not working when asp dropdown list in the tab

I am using asp.net 3.5 framework. My page has modelpopup in that ajax tab controls used. one of the tab has asp:dropdownlist, this dropdown list is binding data from dataset. the tab which has dropdown lists is not working. it is working fine in IE9.0.
Sys.WebForms.PageRequestManagerServerErrorException: Sys.WebForms.PageRequestManagerServerErrorException: Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.

changed to enableEventValidation="false", then it is working fine.

Setting PDFCompatibility not working when saving a file from the API

Hi,
I am trying to save a PDF file using version 1.3 compatibility using the CS3 API. I am flexible to which Action I use. Right now I am trying to use kAISaveDocumentAsAction.
According to AIPDFFormatAction.h, I can set kAIPDFCompatibilityKey to kAIPDFCompatibility13. However, that same header file indicates that these keys should be used with the kAIExportDocumentAction, not the kAISaveDocumentAsAction.
Not surprisingly, the SaveAs Action works, but saves a PDF in version 1.5 (probably not checking the kAIPDFCompatibilityKey).
I have tried using the kAIExportDocumentAction instead... However, in CS3, the Export action does not support PDF as an output type. Maybe in earlier versions this was different.
Can anyone help? Below is the current code I am using that produces a PDF, but not a version 1.3 PDF.
AIActionParamValueRef valueParameterBlock = NULL;
ActionDialogStatus dialogStatus = kDialogNone;
int result = 0;
result = sAIActionManager->AINewActionParamValue(&valueParameterBlock);
if (valueParameterBlock) {
result = sAIActionManager->AIActionSetString(valueParameterBlock, kAISaveDocumentAsNameKey, outputfilename_final);
result = sAIActionManager->AIActionSetString(valueParameterBlock, kAISaveDocumentAsFormatKey, kAIPDFFileFormat);
result = sAIActionManager->AIActionSetInteger(valueParameterBlock, kAIPDFCompatibilityKey, kAIPDFCompatibility13);
result = sAIActionManager->PlayActionEvent(kAISaveDocumentAsAction, kDialogOff, valueParameterBlock);
result = sAIActionManager->AIDeleteActionParamValue(valueParameterBlock);

Hi,
You can try to right-click and '''Reset''' the '''browser.download.lastDir''' key in [http://kb.mozillazine.org/About:config about:config].
[http://kb.mozillazine.org/About:config_entries about:config Entries]

Why does my ipod not work when i plug it into the wall and work when i plug it into my computer?

hello?

What do you mean by works? Do you mean the battery chares on the computr but not with the wall charger?
Did the wall charger ever charge the iPod?

Crystal Report not working when posting the report to the Crystal Server.

Similar Messages

Maybe you are looking for