Crystal Report Pick List - "Table ADM1 could not be found" Error

Hi,
When preview is select in sales order, we select pick list gets error.
Crystal Report Window Forms Viewer:
"Table ADM1 could not be found"
Error in File Temp { .........} .rpt
The table could not be found"
If I login remotely , then log into SAP as this user I do not get an error.
I have given user full authorisation.
I have run Verify Database.
I am assuming it is some database or network user access rights.
Could anyone help on this?
Kind Regards,
Eric

Report was developed and tested against a 'test' database and then imported into a 'production' database.
Problem appears to be that when B1 connects it does not reset the login credentials for the unlinked tables such as ADM1 and OADM.
Performing the following steps appears to solve the problem. Not sure how many of them are really necessary.
1. Develop and test against the test system as before.
2. Save as a .rpt file outside B1.
3. 'Set Datasource Location' to the appropriate B1 datasource for the production database and individually link every table as well as the data source.
4. Save the .rpt file again.
5. Import into the production database.
This does not specifically address the issue where it worked when logged in to the server but not remotely. Perhaps when logged in remotely the test database was not visible but when logged in locally it was.

Similar Messages

The Crystal Reports charting component (sscsdk80.dll) could not be found

Here's our situation. One of our accounting staff installed the upgrade to SP1 for CR 2008, after which Calculated Members & Embedded Summaries in Cross-Tab objects would not function. He tells me he searched these forums and that the problem is a known issue with SP1 and he cannot work without it. Therefore, he rolled it back to Service Pack 0. However since then the above error will occur when running any report that contains a chart or a graph. I've tried to re-register the dll listed in windows, but it errors stating it cannot find the file. I've located the file and it exists.
Can someone please provide me with a resolution to both issues. I have no problem moving to SP1 again if the issue with Calculated Members & Embedded Summaries in Cross-Tab objects can be resolved.

Hi,
I had the same issue. I noticed that after uninstalling SP1, there were 3 DLLs that remained in the win32_x86 directory. One of them was sscsdk80.dll.
I deleted all 3 DLLs (again, no CR installed when I did this), and then re-installed CR 2008 SP0 from scratch. That solved the problem, and now both charting and calculated members are revived.
In the meantime, as product manager for CR, I'm making sure a fix to the root cause issue of broken calculated members in crosstabs in SP1 gets addressed ASAP. I'll update the community as soon as I know more in my blog.
I apologize for the issues this has caused.
Regards, Blair

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

I keep getting the "some items could not be found" error.

I keep getting the some items could not be found error for some podcasts I downloaded then deleted. Unfortunately, now, I can't get rid of the error message. So I'm trying to search for said podcast to re-delete the entry. And it's not there. And I can't find it anywhere else. How can I fix this?

Another user named Springbk posted a fix that worked for me as I was having the same problem today:
I Changed my DNS settings to OpenDNS
On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
change DNS by adding ( + )
208.67.222.222
then
208.67.220.220
click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

When I tap the "download for Android" on my Android phone, I receive a "requested item could not be found" error message.

I am attempting to install Firefox mobile on my Android phone. When I tap "download for Android" on my current browser, I receive a "requested item could not be found" error message.

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
On some supported devices, a bug prevents Firefox from appearing in the Market. This may be related to the recent Market update. You can go to Settings/Applications and uninstall the Market update, then find and install Firefox.
Or, if you have a supported phone, you can download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

How can i solve the vpn server could not be found error on my iphone 5s?

how can i solve the vpn server could not be found error on my iphone 5s?

FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
If I connect while in the premises (same LAN), connection is instantaneous and flawless.
If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

Deleting Duplicates creates "original file could not be found" error

I am not running iTunes 8.2.1.6 and trying to delete duplicates that were created as I tried to move my iTunes Library to other drives. Now I have many duplicates - sometimes 3-4 of the same song. If I delete them I begin to get "original file could not be found" error when trying to play the one version I kept.
Is there some magic to which one I should keep?

iTunes doesn't help you distinguish between duplicates that are two identical copies of the same file or two separate references to the one original file. If the later is the case and you delete any reference allowing the source file to be deleted then ALL other references to the file become invalid. You can either check the properties of each file before deleting and choose whether to keep or delete accordingly or use itunesremoveduplicates from Teridon's iTunes Scripts.
tt2

VENDOR-EXTERNAL_ID could not be found error while loading supplier conatact

Hi,
Please somebody answer to my doubt.
I am trying to load supplier contact to CLM. I am getting "VENDOR-EXTERNAL_ID could not be found" error for all the entries even though those vendors are present in the system.
Kindly help this, This is bit urgent to work on..
Thanks much for your help in advance.
Regards,
Gurvi.

Hi Vikram,
Thanks for the answer.
I have done the same thing but not getting object type to select and getting below error without selecting object type and imported.
records with errors or warnings from file fci_1589662556155572276_contacts.csv
VENDOR_EXTERNAL_ID     CONTACT_TYPE     PRIMARY_CONTACT     DOCUMENT_DESCRIPTION     NAME     DIRECTORY     COMMON_NAME     FULL_DN     FIRST_NAME     LAST_NAME     COMPANY_NAME     TITLE     ADDRESS_1     ADDRESS_2     CITY     STATE_PROVINCE     COUNTY     REGION     POSTAL_CODE     COUNTRY     PHONE_1     PHONE_2     FAX_1     FAX_2     EMAIL     MAILBOX_ALIAS     MAILBOX_SERVER     TIME_ZONE     CURRENCY     DATE_FORMAT     DISPLAY_LANGUAGE     DEFAULT_GROUP     EXTERNAL_REF     LOCATION     ROLES     INACTIVE     CAN_LOGIN     AUTO_BCC     RETURN_RECEIPT     HTML_MAIL     CREATE_DIR_ACCOUNT     GENERATE_NEW_PWD     SEND_NOTIFICATION     DIR_PRINCIPAL     DIR_CREDENTIALS     EXPORT_EXCEL     DEFAULT_ADDRESS     RECEIVE_DISCUSSION_EMAILS
Failed: object 1: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]
30000520     Sales     TRUE     Field is not displayed     LOWER(CONCATENATE(LEFT(J52,7),LEFT(I52,1)))     directory.local.ss               Tom     Boreas     KELCO INC                    Billingsly     RI               48201     US     617-555-1212                    (GMT-5:00) Eastern Standard Time     USD          English                         FALSE     TRUE     FALSE     FALSE     FALSE     TRUE     TRUE     FALSE               TRUE     FALSE
Failed: object 2: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]
I do not what is happening with import feature in ESO. Kindly help me what to do now.
Regards,
Gurvi.

TS1702 "App could not be found" error

I erased all data on iphone. Later when restoring, most of the apps are not syncing back with "because the app could not be found" error. HELLPP!!!

I assume that you are trying to sync them from your computer's iTunes ? If so do the actual files exist on your computer and the entries in your computer's iTunes aren't pointing to files that no longer exist on it ? If so then you should be able to delete the iTunes entries and then re-download them from the store : re-downloading.

Tecra S11: Toshiba Detection Tool: Your product could not be found error

Hi,
I use Toshiba Detection Tool to find drivers quickly for my tecra, but for a month now the page gives this error
Your product could not be found
It is no problem to select my laptop from the drop down list again and again, but it was comfortable, when it worked.
Is there a solution for this problem?

No, there is a Detection tool an exe file. "TOSHIBA-detector,exe" You run it and it opens a browser with your exact product's driver psge. (My Toshiba laptop is a european one.)
The error message:
Auto Detect Error
Sorry!
Your product could not be found
Please click here to return to the support homepage where you can manually select your product

JWS "Product could not be found" error

Hello,
I have an eclipse OSGi project that works from inside eclipse, but when deployed, generates the following error. Below that I posted my jnlp files. I have been looking at this for over two days, and I can't see anything wrong. I have been through the tutorials, bug reports, and obviously Google, but nothing. I know this must be a simple error, but I can't seem to see the forest for the trees, and I am stumped (yes, pun intended)!
Thanks for any help...
!SESSION 2009-01-15 13:39:37.414 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.6.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
!ENTRY org.eclipse.equinox.app 0 0 2009-01-15 13:39:38.289
!MESSAGE Product net.niat.calvin.product could not be found.
!ENTRY org.eclipse.osgi 4 0 2009-01-15 13:39:38.305
!MESSAGE Application error
!STACK 1
java.lang.RuntimeException: No application id has been found.
     at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:236) (......)
calvin.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp
    spec="1.0+"
    codebase="file:///C:/junk/ERS/">
<information>
    <title>ERS</title>
    <vendor>NIAT</vendor>
    <homepage href="http://niat.net"/>
    <description>Electronic Record System</description>
    <icon href="icon.jpg"/>
    <icon kind="splash" href="splash.jpg"/>
</information>
<security>
    <all-permissions/>
</security>
<resources>
    <j2se version="1.6+" max-heap-size="256m"/>
    <jar href="org.eclipse.equinox.launcher_1.0.101.R34x_v20080819.jar"/>
    <extension
        name="Calvin Feature"
        href="features/net.niat.calvin.feature.jnlp"/>
    <property
        name="osgi.instance.area"
        value="@user.home/Application Data/calvin"/>
    <property
        name="osgi.configuration.area"
        value="@user.home/Application Data/calvin"/>
    <property
        name="eclipse.product"
        value="net.niat.calvin.product"/>
</resources>
<application-desc main-class="org.eclipse.equinox.launcher.WebStartMain">
    <argument>-nosplash</argument>
</application-desc>
</jnlp>
net.niat.calvin.feature.jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="file:///C:/junk/ERS/">
<information>
    <title>ERS</title>
    <vendor>NIAT</vendor>
</information>
   <resources>
    <jar href="plugins/net.niat.calvin_2.6.2.11.jar"/>
    <extension name="RCP" href="features/org.eclipse.rcp_3.4.1.jnlp"/>
</resources>
<component-desc></component-desc>
</jnlp>
org.eclipse.rcp_3.4.1.jnlp:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="file:///C:/junk/ERS/">
<information>
    <title>Eclipse</title>
    <vendor>eclipse.org</vendor>
</information>
<resources>
    <jar href="plugins/org.eclipse.core.commands_3.4.0.I20080509-2000.jar"/>
    <jar href="plugins/net.niat.calvin_2.6.2.11.jar"/>
    <jar href="plugins/org.eclipse.core.commands_3.4.0.I20080509-2000.jar"/>
    <jar href="plugins/org.eclipse.core.contenttype_3.3.0.v20080604-1400.jar"/>
    <jar href="plugins/org.eclipse.core.databinding_1.1.1.M20080827-0800b.jar"/>
    <jar href="plugins/org.eclipse.core.expressions_3.4.0.v20080603-2000.jar"/>
    <jar href="plugins/org.eclipse.core.jobs_3.4.0.v20080512.jar"/>
    <jar href="plugins/org.eclipse.core.runtime.compatibility_3.2.0.v20071008.jar"/>
    <jar href="plugins/org.eclipse.core.runtime_3.4.0.v20080512.jar"/>
    <jar href="plugins/org.eclipse.equinox.app_1.1.0.v20080421-2006.jar"/>
    <jar href="plugins/org.eclipse.equinox.common_3.4.0.v20080421-2006.jar"/>
    <jar href="plugins/org.eclipse.equinox.preferences_3.2.201.R34x_v20080709.jar"/>
    <jar href="plugins/org.eclipse.equinox.registry_3.4.0.v20080516-0950.jar"/>
    <jar href="plugins/org.eclipse.help_3.3.101.v20080702_34x.jar"/>
    <jar href="plugins/org.eclipse.jface.databinding_1.2.1.M20080827-0800a.jar"/>
    <jar href="plugins/org.eclipse.jface_3.4.1.M20080827-2000.jar"/>
    <jar href="plugins/org.eclipse.osgi_3.4.2.R34x_v20080826-1230.jar"/>
    <jar href="plugins/org.eclipse.swt.win32.win32.x86.source_3.4.1.v3449c.jar"/>
    <jar href="plugins/org.eclipse.swt_3.4.1.v3449c.jar"/>
    <jar href="plugins/org.eclipse.ui.forms_3.3.101.v20080708_34x.jar"/>
    <jar href="plugins/org.eclipse.ui.workbench_3.4.1.M20080827-0800a.jar"/>
    <jar href="plugins/org.eclipse.ui_3.4.1.M20080910-0800.jar"/>
    <jar href="plugins/runtime_registry_compatibility.jar"/>
</resources>
<component-desc></component-desc>
</jnlp>

Well, I found the solution to my problem.
It turns out that this error is caused when your JNLP app is missing resources needed by equinox. In my case, I was missing the com.ibm.icu_xxxxx.jar and needed to update my org.eclipse.swt.win32.win32.x86_xxxxx.jar. I should have been clued in when the application ran in eclipse (my development environment, which has the proper files), but not under JWS. Correcting my .war build with the proper items did the trick.
If this is happening to you, make sure you place all of the required bundles and fragments into your deployment directory.
Good luck, I hope this helps someone else!

Add feature - assembly could not be found error 0x80073701

I am trying to install the SNMP service on this server - succesfully did this on an identical server.
Windows reports back "The request to add or remove features on the specified server failed. The reference assembly could not be found. Error 0x80073701"
This error has been posted in a few places on the forums so I have followed the advice which includes the following:
1) I have run a chkdsk and rebooted.
2) I have run the system file checker (sfc / scannow) and this reported no issues with system integrity.
3) I have run DISM /Online /Cleanup-Image /RestoreHealth. Reported repair made and I rebooted.
4) I have only the English language pack installed.
On inspecting the CBS log I see these errors, just a sample:
i)2014-03-24 14:49:57, Error
CSI    0000000d 2014/3/24:14:49:57.330 (F) base\wcp\componentstore\csd_locking.cpp(216): Error STATUS_SXS_ASSEMBLY_MISSING originated in function CCSDirectTransaction::LockComponent expression: (null)[gle=0x80004005]
ii)2014-03-24 14:49:57, Error
CSI    0000000e (F) STATUS_SXS_ASSEMBLY_MISSING #5681# from CCSDirectTransaction::OperateEnding at index 0 of 1 operations, disposition 2[gle=0xd015000c]
iii)2014-03-24 14:49:57, Error
CBS    Failed to process single phase execution. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
iv)2014-03-24 14:49:57, Error
CBS    Failed to perform operation.
[HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
However I am still getting the same message. Can anyone advise how I should progress?
Many thanks for your input.

Hi,
>>I am trying to install the SNMP service on this server
In fact, SNMP is deprecated. Instead, use the Common Information Model (CIM), which is supported by the WS-Management web services protocol and implemented as Windows Remote
Management.
However, we still can use SNMP service on Windows Server 2012. For double check, we can follow the blog below to check whether something is missing during installation process.
Install SNMP on Windows Server 2012
http://michaeljgirard.com/index.php/install-snmp-on-windows-server-2012/
Best regards,
Frank Shen

Everything was OK - now have "The backup volume could not be found" error

Setup:
* MacBook Air
* MacBook 10.5.5
* Mac Mini with external hard drive with 2 partitions, one of which is called "Time Machine", 10.5.5
What was working:
MacBook Air and MacBook would backup with Time Machine over wireless connection to .sparseimage files on the "Time Machine" volume connected to the Mac Mini.
Change:
Had to give the MacBook Air back to my old employer, so I "merged" the MacBook Air onto the MacBook (the merge was somewhat convoluted, and unrelated to my issue I think: I used SuperDuper to copy the MacBook Air hard drive onto a new SATA notebook drive. Then I installed that drive in the MacBook. Then I used Migration Assistant to copy the user from the original MacBook SATA drive onto the new drive in the MacBook. Now I have two users on the MacBook, whereas before I had one use on each of two computers).
Symptom:
Now I cannot use Time Machine to backup the MacBook to the "Time Machine" volume. Everything I've tried causes Time Machine to briefly "prepare" the backup, then return the error "The backup volume could not be found". Things I've tried:
* Mounting the volume "Time Machine" on the MacBook, under either user, works fine - I can write, read, and delete from the volume.
* Deleting the old .sparseimage backup files from the "Time Machine" volume.
* Erasing the "Time Machine" volume with Disk Utility on the Mac Mini.
* Using "Change Disk..." in Time Machine to re-select the volume "Time Machine"
* Using "Change Disk..." in Time Machine to select None, then restarting, then re-selecting the volume "Time Machine"
* Making the volume "Time Machine" read/write by guests, then connecting to it from the MacBook as a guest instead of as an admin user.
* Repairing permissions and/or repairing disks using Disk Utility on all applicable volumes.
* Tried all of the above under both users on the MacBook (both of whom are Admin users)
None of these things have worked, they all exhibit the same symptom when I manually start a time machine, or when I wait for Time Machine to automatically start the backup.
Any ideas of what I can try next?

Consider these reasons for this error...
*_"Backup Volume Could Not Be Found"_*
First, it is important to distinguish this error message from another, similar Time Machine error that states, “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
*Reselect Your Time Machine Disk*
(http://support.apple.com/kb/TS1329)
In the Finder, go up to the "Go" menu and select "Connect to Server".
Click the "Browse" button at the dialogue box.
In the Network window that opens, do you see your TM drive?
Double click it to mount the drive.
Now let's try to reselect it for Time Machine use.
Go to System Preferences --> Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
On the other hand, does your Time Machine drive NOT appear at all? Is it appearing on your desktop? If it is still connected try disconnecting the cable, waiting a few seconds and then reconnecting the cable. Does the drive mount on the desktop? Try initiating a backup now.
*Disk Fails to Wake From Sleep*
“If your external HD has a sleep function that does not wake for Time Machine backups. Time Machine will alert you that "The backup volume could not be found", and backups will not be made.” (http://support.apple.com/kb/TS1337)
*3rd-Party Disk Utilities* #
Many external hard disks come with software for maintaining/monitoring hard disk activities. It may have come on a separate CD or been installed on the drive itself. If these programs have been installed they may interfere with Time Machine backups, generate erratic behavior, or cause the drive to ‘disappear’ altogether.
You may never know these applications are there as they may be running in the background. Go to System preferences --> Accounts. Select your account in the pane on the left. Click “Login Items”. Are there any items listed there that might refer to hard disk utilities. If so remove them using the “-” button at the bottom.
*Time Capsule Has a Long Name*
“When using your Time Capsule for Time Machine backups in Mac OS X 10.5 Leopard or later, the Time Capsule backup volume may not mount and Time Machine may not be able to back up to it. This alert may appear: "Backup volume cannot be found". This can happen if the Time Capsule disk has a long name. [http://support.apple.com/kb/HT1170]
Open AirPort Utility (in /Applications/Utilities).
Click your Time Capsule's icon.
Click "Manual Setup".
Enter the password for the Time Capsule if prompted.
Click the Disks icon.
Highlight the volume name that appears under "Time Capsule Disk".
In the Name field, enter a name for the volume that is less than 27 characters long.
Click Update.
After Time Capsule restarts, on the Mac(s)using Time Machine, open Time Machine preferences and reselect the Time Capsule volume.”
Let us know if any of these suggestions help.
Cheers!
Message was edited by: Glenn Carter

URL could not be found errors suddenly occuring, again

Hello Apple iTunes U staff and users,
I'm writing on Oct 22, 2010. This past April, a staffperson in our Pharmacy school posted to these discussion forums the following issue: http://discussions.apple.com/thread.jspa?threadID=2410734&tstart=0
We're now getting reports from students in a different department who access iTunes U in a different way (through a Blackboard building block) of the same issue. The last time, the issue cleared up within about 24 hours. I'm still monitoring the issue this time to see whether it's cleared up yet or not, but I know it lasted a day or two at least, possibly more, and still may be occurring.
Basically, when trying to download certain files from an iTunes U course page, an exclamation point will appear to the left of the file in the iTunes U section of the user's iTunes library. Clicking on the exclamation point brings up a pop-up window with an error message that says:
There was a problem downloading "<title>". The URL "<address>" could not be found on the server.
We'd like an explanation from Apple of why this happens and any advice on how to avoid it. I've found that I can get the files to download (after receiving this error) by going back to the course in iTunes U and clicking "Get Tracks," but this creates duplicate collections in the iTunes U section of the user's library and is not a good solution long-term. Thanks

Duncan,
Thanks for your reply. I just did another test and received the same error again. The test I did was trying to download a file titled "He And She" from https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/su.edu.2466338216.0 2466338224
The indvidual file URL is https://deimos.apple.com/WebObjects/Core.woa/Feed/su.edu.2466338216.02466338225/ 5587FC0A-A595-D5CB-7503-1E3613C73F40%40su.edu/004cc1f41482b5988a640b3500cad659d9 1f5221714185a939b58276a99fe82376bd99ac16
The same is happening with multiple other files in the same course page; I have not yet tested files in other course pages.

Folder Could Not Be Found Error - Please Help, Don't Want To Re-Edit EVERYTHING!

So I just edited a huge set of photos. I put them into a collection, then undid the collection. But now when I go back to the edited photos in their original location & click develop there is an error saying ""this folder could not be found". I can see all the pictures & the edits I made in the Library though, so I'm thinking they're still there somewhere.
When I click on Library, it says they are located in G:\Lily\2010 (but I can't locate this folder G: on my hard drive)
When I right click & do show in explorer it says there is no file located in this specific path
I tried re-uploading the unedited pics from my camera into a new folder on C: & then right clicking on the G:\lily\2010 & selecting "find missing folders" & then selecting the newly uploaded unedited pics & that didn't work either.
Is there something I'm missing here? How can fix this so I don't have to re-edit all of these photos again? PLEASE PLEASE HELP!!! Thanks in advance

There is no update folder location when I right click.... I'm using LR 3 beta if that matters. There an update folder location on the far left scrolling menu, which I've tried to do a couple of different ways & it hasn't worked.
Does anyone know how I can find the G: folder on my computer???? I would try to paste the photos back in that folder if I could find it.

Crystal Report Pick List - "Table ADM1 could not be found" Error

Similar Messages

Maybe you are looking for