Crystal Report query on top of BI Query : Exception raised in infoview
Hi experts,
I have created a crystal report query on ntop of a BI query and exported to BO.
- For the BI query without variable, the crystal report runs with success in infoview and Crystal report
-For the same BI query with a variable, the crystal report does not run. A java exception is raised
Please could somebody tell me what is the pb ?
Tha
Hi there,
Actually i am investigating the best way to produce Cristal Clear Reports using data from BI, so Cubes, DOS, etc. As far as i know BO use BEx queries, then CR can produce Reports, but i thought it works for all cases, i mean calculation, filtering and variables.
That's quite disapointing because i already told my client i will use his old BEx Queries to produce Reports with CR (frozen Reports), so use CR as Workbook to present them in fancy way.
Any comments will be welcome.
Al.
Similar Messages
-
I am facing a problem in a crystal report which is based on Infoset query
Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
SrinivasHi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo -
I am facing a problem in a crystal report which is based on Infoset query.i
Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly
-
Creating Crystal Reports Dynamically from an incoming SQL query
Hi,
I have a requirement where a sql query will be entered by the user in a text box and in the back end java code, i have to create a crystal report dynamically based on that sql query and show it in the crystalviewer object.
For example if the user writes "select x,y from xtable ", i should be able to create a report with 2 fields, and if the user says "select x,y,z from xtable" then i should be able create and show a report with 3 fileds...thsi report creation should be done in the click event.
Is this possible in java? I have found something similar in .NET... pls have a look at this
http://vb.net-informations.com/crystal-report/dynamic_crystal_report_from_sql_query_string.htm
Thanks,
PreethiHi Preethi,
Can you please share the steps with me? I am also looking for dynamic SQL being applied to the crystal report.
Thank you so much for your help in advance.
Regards,
Janakiram D. -
Crystal report with prompts takes very long time to open in infoview BOXI3.
Crystal report with prompts takes very long time to open in infoview BOXI3.1?
Is there any way to increase the performance.Ramsudhakar,
There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
What we know. BOXI3.1
What we don't know.
O/S
App. Server
Hardware Spec's
ETC.
I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
Thanks
Bill -
No data in Crystal report created on SAP BW BEx Query
Hi Experts,
I am trying to create a Crystal report on top of a BW query. I am able to login to the BW system and open the BEx query and the objects are coming into the crystal report.
But when I drag and drop some objects into the details area and try to preview sample - it does not show any data (it shows accessing database but doesnt bring any data)
I copied the generated SQL query in to the section in the BW system in transaction code 'MDXTEST' and it runs correctly and shows me the result below there.
Just to try - I unchecked 'Use MDX..' check box by following the path SAP->Settings to check if that could bring back data ... and YES that worked which means data is not coming from the BW query with MDX connection but when MDX seems to be fine and retrieve result when I run the sql statement in tcode MDXTEST.
Also when I do preview samples - I can see in SM50 in BW system that it is trying to run the report just that I am not able to see any data in my crystal report.
Any help in this regards would be greatly appreciated.
Thanks in advance.
Regards,
SunnyHello
The order of display of attributes in Webi and Crystal report would be different.
Collapse the infoobject and skim through the attributes, you should be able to find them.
Vishal -
Crystal report showing Incorrect data against Bex Query
I have created Crystal report on top of Bex Query, I have not done any calculations in the report, just dragging structure and key figure in the report, ran for one month, when I compare with Bex Query with same period, it is showing incorrect data.
I don't know what can be wrong here?
We are Business Objects 3.1 SP3.
Thanks,
RaviHI,
I would suggest you trace the workflow in Web INtelligence according to these notes:
Tracing:
Unix : Note 1235111
Windows : Note 1260004
and then post a link for downloading the trace files here.
regards
Ingo -
Crystal Report Missing SAP InfoSet, SAP BW Query Connector
Hi,
I have installed SAP GUI for Windows 7.2 (Compilation 2) and Crystal Report 2008 SP2 then following by installed SAP Integration Kits 3.1 SP3 on my workstation. However, when i launch my Crystal Report designer, it do shows SAP toolbar however when i click on one of the icon (eg: Setting) the entire CR will hung and prompt me error and exit automatically.
Beside that, i could not find any connector for SAP (Eg: SAP InfoSet, SAP BW Query and etc) when i create a new blank report by click on the New Connection.
Appreciated anyone know this could assist on this.
Thank You.
Regards,
CKHi Ingo,
Thanks for your prompt reply. I will sort it out and ensure the release version will be the same as Inter Kits.
By the way, i saw your post regarding the Integration Kits installation and configuration. However, i still need some clarification; appreciated you could assist me on this.
I have installed SAP BOXI3.1 SP3 on an LINUX machine (Redhat Enterprise 5) and the server was running fine without connecting to BW or SAP eCIBS.
Now, i have to establish the connectivity to BW (InfoCuve and BW Query) and SAP eCIBS system. As my customer requirement was required to using WEBI, CR and Xcelsius for connecting to BW for getting the data and then using scheduler in BOE for performing report distribution. Some of the report will connecting to SAP eCIBS directly and that will using our Client's machine for creating the report (using CR2008) and then publish to the BOE platform for report scheduling and distribution.
My question, i wish to install SAP Inter Kits and downloaded Inter. Kits for SAP Solution 3.1 SP3 from service market place. When i refer to the document from help.sap.com; there are couple of section but i wish to know which are the perquisite section that i wish to install and configure?
Eg: System Requirement which are installing SAP RFC SDK and SAP JCO SDK into my BOE server, then following my create a logon token. How to to that? It also require to install SAP Java Connector and SAP GUI, does these two available for LINUX OS as well?
The steps in doc was confuse, appreciated your kind help.
THanks.
Regards,
CK. -
Crystal Report XI: Can you write your query in SQL instead of using the GUI
Hello
In crystal report version XI, can you write your query in sqlplus and then use the crystal report designer to build your report instead of using the GUI . I would like to be able to go database and show sql query and open that query and make changes directly there, is that possible on this version, if yes is there a setting somewhere? Please let me know.
Thank you
alphaMoved to Database forum.
No you can no longer modify the SQL directly. Use a Command Object to enter the SQL directly.
Thank you
Don -
Crystal report error after changes in BW-query
Dear all,
we have an problem concerning crystal report (CR 2008) based on SAP BW (3.5).
If we make any (simple) changes on the BW-Query the Crystal report canu2019t be use any longer. We get an error message and forced to create a new one. Does anybody know a solution for this problem?
Thanks
HagenHi Ludek,
the error message is the following:
Data couldn't released from database.
After having pressed the OK-button the errormessage is:
Database connector error: 'BAPI-Error #:0
Invalid MDXcommand at .... -
Crystal Report based on BEX 3.X query + Hierachies
Hi,
I have built a Crystal Report (2008) based on BW Bex 3.5 query.
The report has a hierachical group based on a hierachy
similar to the strategy used in
http://blog.mastering-sap-and-businessobjects.com/2009/07/10/crystal-reports-and-sap-bw-hierarchies--conditional-formatting-part-2.aspx
Certain sub and parent nodes in the hierachy have suppressed to make sure the report is formatted correctly.
The user running the report does NOT have the option of choosing the level of nodes to hide or show.
At this point in time the report is showing the correct nodes, however there is a concern that once users start re-arranging the hierchies and adding nodes that the reports will have to be maintained. (Which I think is a catch 22 situation)
Does anyone have another suggestion how to have the reports be "Dynamic" (based on the hierachy) and still not have the danger of the hierachies changing and affecting the Reports
(I certainly can think of no other ways EXCEPT creating a structure in the BW Query - which means that in any case if the hierachies changes, the BW Query will have to be maintained)
Kind Regards,
NicoleHi,
Crystal Reports is using a parent child relationship which means the complete hierarchy is dynamic and in case your hierarchy is changing on the BW side Crystal Reports will pick up those changes automatically - assuming we talking about additional levels or levels been removed.
ingo -
Crystal Reports 10 Datasource Location and SQL Query update
I am running Crystal Reports 10 accessing SQL Server 2008 database on Windows 7. Our product changed database names and I'm trying to update reports to point to the new database. Sounds nice and simple. The database has no structure changes yet, it's just a copy and rename of the old database. Both databases exist, same SQL instance, same permissions, etc. ...
Existing working report:
Has an ODBC (RDO) location to database DbVersion1
If I run Show SQL Query, the database name is in the query text (i.e. FROM DbVersion1.dbo.MyTable)
Attempted:
In Set Database Location popup, I created a new ODBC (RDO) connection to database DbVersion2
Updated Current Data Source for report to this new ODBC (RDO) connection.
Ran Verify Database. Popup stated "The database is up to date."
But when I run "Show SQL Query", is still shows DbVersion1 in the text, and the report displays data from DbVerison1. When I display the Datasource Location for the report, it shows DbVersion2 as I changed to above. How do I "refresh" the SQL Query to recognize the new Datasource Location?
Thanks,
GaryHi Gary,
A possible couple of issues, CR 10 doesn't support SQL Server 2008 and it doesn't support Windows 7. We had to update CR XI R2 SP 6 and above to make SQL 2008 work. MS changed the name of their client dll so CR is not aware of the new drivers.
MDAC native driver may work but not sure....
Try OLE DB, it may work better.
Thanks
Don -
Crystal reports on SAP-BW 3.5 query - problem w. properties of key figures
Dear experts,
Creating a crystal report on a SAP-BW 3.5 query we have the following problem:
In SAP-BW query we defined a restricted key figure with property
'Calculate single value as Ranked list (olympic)'.
Within SAP-BW it works correctly; in Crystal Reports we see the
key figure without the defined property.
Example
SAP-BW
Customer Revenue
4711 1
4812 2
4913 3
Crystal Reprts
Customer Revenue
4711 500 EUR
4812 300 EUR
4913 100 EUR
Could anyone give us an advice to solve this?
Thanks a lot in advance.
HagenEdited by: Hagen Kunze on Feb 12, 2010 3:22 PM
-
Crystal Reports - Problem with too long BEx Query technical variable names?
Hello!
I have Crystal Reports 2008 SP3 and the SAP BO Integration Kit XI 3.1 SP3 installed and want to access a BEx query on a BW system within my Crystal Report.
The problem is that the name of the BEx variable is not displayed correctly (just "[]" is displayed for the variable name) as a parameter within Crystal Reports when I import the query. Furthermore I can't navigate through the fields of the query within Crystal Reports.
The technical names of the BEx query-variables have a length of 12 characters.
The interessting thing is that if I change the technical names of the BEx query variables to a maximum length of 8 characters everything works fine.
I use the SAP toolbar within Crystal Reports 2008 to create the report and have the "MDX-driver"-setting selected.
Has anyone ever had the same problem? Any suggestions?
I don't want to change the technical names of the variables of my queries...
thanks,
DominikHi!
Just fixed the problem: The "Transports" for the Integration Kit had to be imported at the BW-System
regards -
Crystal Reports Templates usage - SAP BW MDX query data
Hi Ingo,
How are you?
I am experiencing issues with crystal reports when trying to use crystal reports templates with SAP BW data.
I have successfully created Crystal Report using SAP BW data with NodeID, ParentNodeID hierarchy, Crystal Hierarchical Grouping.
Also developed Xcelsius Dashboard using Live Office --> Crystal Report (SAP BW data) with refresh data on open.
Now trying to create a template for new crystal reports to be designedu2026
The following are observed by me:
1. When I create a crystal report using Report Wizard and select templates from the list shown, the following error displayed for SAP BW data:
2. When I try to apply template using Template Expert and selecting the report which is created using SAP BW data (and formatted), the following error displayed:
u201CCould not apply template to the documentu201D
I would like to know, whether there are known issues with Crystal Reports Templates using SAP BW data? If so, could you suggest any solutions/work around to this issue?
Thanks & Regards,
S.Salai ManimudiyanI tried the following three methods:
1. Applied all the 12 Crystal Templates
2. Applied my own reports as Template
3. Also applied Crystal Report developed using Templates Fileds.
None of the above is working.
Created a report with BW query data and try to apply all the above templates but the same issue.
If I create a report using eFashion universe and apply all the above works without any problem.
I do agree with you that templates should not depend on the data source, as it is mainly for the common/standard report page layout (to reuse)...
Could you pl. check at your end and let me know the results.
Thanks & Regards,
S.Salai Manimudiyan
Maybe you are looking for
-
Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is t
-
I am having trouble Turning on my MacBook Pro
Okay so I tried uploading some software specifically it was "smart surfing for Mac" by trend micro. I have had this software for I think over a year and was trying to find out if I could still use it. So installation went fine, loaded briefly then i
-
Problem while sending spool as mail in Excel
Hello, My requirement is to send the spool generated in background as attachment in excel. i am using RSPO_RETURN_SPOOLJOB for converting spool in to internal table and SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mail. The problem is data is
-
In the past month or so I've noticed that embedded movies either won't play or have no sound. Any suggestions? Thanks.
-
I have just now bought a 16 GB Applie Ipad with Ret dispaly wi fi 3G...I want to upgrade to the Apple air. Is it possible? Am willing to pay the overheads.