Crystal Report Runtime Error 9.0.Could not open the report

Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.N

Hi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan

Similar Messages

How can I resolve error message, Linklok could not open the file ?

I have an MP3 subscription download link (with Abraham HIcks) but I am unable to complete the download because I get the error message "Linklok could not open the file".

Please have the site administrator contact us at vibralogix.com as it appears something is not setup correctly with Linklok on their site.

Ipad, Error message "Safari could not open the page"

Hi... I am getting the error message "Safari could not open the page because the server stopped responding"
I have read the previous replies to this error message and have made sure the Ipad is connected to internet (skype works fine.)
I have also done a hard reset on my Cisco router.
I have Reset Ipad to factory settings twice.
I have Reset network settings five times
I have Powered off and on five times,
turned wifi off and on countless times.
Any idea other ideas? Ipad was bought in US 3 weeks ago. Worked fine at hotel in mexico. I am now in Bolivia. Different countries screwing it up? Could my router be too old? My Mac and iphone work fine on it though, although they are also old and since my macbook refuses to update it runs on OSX 10.5.8
Thanks, your help is immensely appreciated.

Can you connect to the internet using other WiFi networks? Have you even tried outside of your own home WiFi network? Have you tried anything I here yet?
iOS: Troubleshooting Wi-Fi networks and connections
Occasionally I get this message in Safari but I also can't get online with any browser when I get the message. What I always do - and it always works for me - is to close all apps on my iPad and reset the device. I don't know if closing apps has any real effect or not. Most likely is it the system reset that brings it back to normal behavior.
Due to the fact that you have restored to factory settings twice already, I can't believe that resetting the iPad would do any good at all. But you are getting nowhere anyway, so try it if you like.
In order to close all of your apps, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Web Intelligence report scheduling: Error "Could not open the file"

Hello,
we are on BO 4.0 SP9 Patch 1.
Since the update to this patch level we have intermittent failure of scheduled reports in Web Intelligence.
Error message is: "Could not open the file *.wid"
There has been neither a change of the report nor a promotion.
Former schedules finished successful.
SAP note search or SCN search only showed notes with the issue that this error occurs after a promotion.
Does anyone has experiences with this error?

Hi Sebastian,
If Hot Back is enabled I would suggest turning this feature off unless it’s a business requirement.
In addition as a workaround in the reoccurring jobs set the number of retries to something greater than 0.
This issue was fixed in BI4.0 SP08, I would suggest opening an incident with support.
Hope the above helps
~Valdrin

Could not open the ICU common library

Dear all,
I’ve done heterogeneous OS migration on our Solution Manager system release ver. 7.0 Ehp1, from HP-UX 11.31 to RedHat 6.5. Then we need to perform the system upgrade to version 7.1
Kernel version is SAP Kernel : 720_EXT_REL.
Database Client Library : OCI_112, 11.2.0.3.0, V1, default.
created in : Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116
ICU Version : 4.0.1 Unicode Version 5.1
Everything is working fine. EarlyWatch reports are prepared. But when I checked the SLD http://saptst:54000/sld I’ve got the error “Internet
Explorer cannot display the webpage”. I also checked with IP address and it’s the same error.
With Chrome browser the error is “Oops! Google Chrome could not connect to saptst:54000”
I checked the SLDCHECK and got:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_SMP gateway host: saptst
gateway service: sapgw40
Testing the RFC connection to
the SLD java client...
RFC ping was successful
SLD server access
settings:
host name: saptst
port number: 54000
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function
LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
SAPSLDAPI RFC is working fine.
But on the putty connection with the server I’ve got “Unknown function module: Function SLDJAVA_ACCESSOR_REQUEST not found”.
I’ve checked the std_server0.out file in the work directory:
Could not open the ICU common library. The following files must be in the path described by the environment variable
"LD_LIBRARY_PATH":
libicuuc.so.30, libicudata.so.30, libicui18n.so.30
[nlsui0_mt.c 1620] pid = 3079
LD_LIBRARY_PATH is well set in environment of the smpadm user.
The RFC libraries in the /sapmnt/SMP/exe, /usr/sap/SMP/SYS/exe/run, /usr/sap/SMP/SCS01/exe
and also in /usr/sap/SMP/DVEBMG40/exe are
libicudata.so.34
libicudata.so.40
libicudecnumber.so
libicui18n.so.34
libicui18n.so.40
libicuuc.so.34
libicuuc.so.40
There is no libicuuc.so.30, libicudata.so.30, libicui18n.so.30.
I’ve also downloaded the last kernel patches, unpacked and checked the RFC libraries, but there were no libicuuc.so.30… with number 30.
Why the system is searching for these libraries with 30, but not 34 or 40?
Can you please help how to solve the error “Could not open the ICU common library”?
Is this the problem why I can’t open the browser http://saptst:54000/sld and I got the error “Internet Explorer cannot display the webpage”?
Thank you in advance.
Best regards,
Ruzica

Dear all,
I've tried to deployed Java with:
SAPJEE10P_5-10003469.SCA
SAPJEECOR10P_19-10003466.SCA
SAPJTECHF10P_21-10003468.SCA,
but the file for the SAPJTECHS, SAPJTECHS10P_26-10003467.SCA finished with the
error again for "Could not open the ICU common library.
The following files must be in the path described by
the environment variable
"LD_LIBRARY_PATH":
libicuuc.so.30, libicudata.so.30, libicui18n.so.30
The deployment failed with the following error:
Starting Deployment of SQLTrace
The SDM will now start SAP Web AS Java instance processes in order to perform online
deployment. After that the deployment will proceed.
It could take some time, so please be patient.
Aborted:
development component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0', grouped by :SDM could not start the J2EE cluster on the host saptst! The online deployment is terminated. A timeout occured during the cluster running verification. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment of SQLTrace finished with Error (Duration 1801206 ms)
Starting Deployment of SAP_JTECHS
Aborted:
software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.10.26.20121031152700''/'0':Failed deployment of SDAs:development
component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0' :
aborted
Please, look at error logs above for more information!
Deployment of SAP_JTECHS finished with Error (Duration 918 ms)
I've tried:
#cd /usr/sap/SMP/DVEBMGS40/SDM/program/
#./StopServer.sh
#./sdm.sh jstartup mode=standalone
#./sdm.sh j2eeenginestartstop timeoutmillisec=1800000
#./sdm.sh jstartup mode=integrated
#./StartServer.sh
But still the error "SDM could not start the J2EE cluster on the host saptst" appeared again.
Can you please advice what should I do to deploy the SAPJTECHS10P_26-10003467.SCA ?
Thank you in advance,
BR,
Ruzica

Unable To Use Internet/Safari Could Not Open The Page Because The Server Stopped Responding

Hi
I having a problem while opening safari on my iphone-4 the error message "safari could not open the page because the server stopped responding"
But i have checked router side, no problem found because router is working with other device laptops and other devices,
if any one know the issue, please help me....

I am having the same issue. Its says that the server has stopped running. THis has gone on for three days straight. First time it fixed it by powering down the unit, the next time it worked resetting the network settings. Now its happened again and these two options do not work either. What do I do or what could be wrong??

"An error has occurred: Could not find the document." on opening the BO report

Hi ,
On publishing the BO report in Portal, we get the blank screen with warning message as below screenshot and facing the ""An error has occurred: Could not find the document."" error message when accessing the BO report using open document URL directly in browser instead of portal.
Link: http://<host>:8080/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=ASClVc_yw55L
We already have many BO reports successfully running in the production environment.
But for this new report we are getting this error. The difference found in this report is from Infoviewapp the login page appears as below in to which the developer logs in.
But for the reports coming with error the login page authentication value is changed to "Enterprise". So the system related fields disappear after that and looks like below
Please let us know the root-cause of this error message. Is this something to do with user authorization in BO system at report level or some config changes related to SAP/Enterprise authentication.
Multiple posts in SDN related to this error message points to check for user authorizations in BO system. Please provide details on this if this is the case.
Regards,
Bhaskar

Hi ,
The dropdown is now made visible to the users in the opendocument property as per the suggestion in the below links. The user can choose the authentication type and login into reports after that.
http://scn.sap.com/thread/3525264
http://scn.sap.com/thread/1417858
My question now is after changing the visibility of the authentication true, the SSO doesn't work as before. Is there any way to make the SSO available with this setup ?
Regards,
Bhaskar

Bursting Control file, Error!! Could not deliver the output for Delivery

Hi,
I am using bursting control file to send report output to email in R12.1.3.
If the report output is having data, it is working fine. if there is no data it is getting errored out with the below message.
"Error!! Could not deliver the output for Delivery channel:null "
In the report output i put "No data found", when i click on view output the output in application is showing as "NO DATA FOUND" in PDF .
"Bursting VMC Approved Purchase Orders for a period (XML Publisher Report Bursting Program)" got above error.
my requirement is if there is no data, still i require the output to email.
Thanks in Advance
Adina.

Hi,
I am facing the same situation and want the bursting program to finish in normal even when there is no data.
Can you please let me know how you resolved this?
Thanks
RG

Error!! Could not deliver the output for Delivery channel:null

Hi Friends,
XML/BI publisher : 5.6.3
Oracle Applications : R12.0.6
Bursting program Log file
==================
XML/BI Publisher Version : 5.6.3
Request ID: 993023
All Parameters: Dummy for Data Security=N:ReportRequestID=993022:DebugFlag=Y
Report Req ID: 993022
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:XXXXXGRP02
Preparing parameters
null output =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993023.out
inputfilename =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Data XML File:/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Set Bursting parameters..
Temp. Directory:/tmp
[041210_040045855][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[041210_040045859][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=993022, user-variable:cp:language=en, user-variable:cp:responsibility=50537, user-variable.OA_MEDIA=https://appscgrpdev.oracleoutsourcing.com:443/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=993022, user-variable:cp:locale=en-US, user-variable:cp:user=Dev2, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=993023, user-variable:cp:org_id=90, user-variable:cp:reportdescription=Test_xml_bursting, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Bursting program Out put file
==================
Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

An error has occurred: Could not find the document.

I get the "An error has occurred: Could not find the document." error when trying to open a URL using OpenDocument. The URL is as follows:
http://:<myserver>8080/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AZjCUhaL3c9Is.YxtGMc7K4&sIDType=CUID
I am certain the value of iDocID is correct, and I am also certain that I can get an OpenDocument to work on the server. In fact, I tried the same URL using a different iDocID for a Webi report in a different folder, and it works. For some reason, it appears as though the report in this folder won't open though.
Any thoughts on this would be greatly appreciated. I've been working on this for a couple of days an am completely stumped. Also, I'm relatively new to Business Objects. Is there a log file that I can view that might give me more details regarding the error?
Thanks in advance for your help!

May be that the user who is accessing the report does not have sufficient rights to view it.
Check whether you are able to view the document as an administrator.
Regards,
Niraj

CiscoWorks LMS 4.0.1 - Could not generate the report

Hello,
I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
Does anybody has an idea of how I can fix this issue?
Thanks a lot in advanced.
Best regards,
Marc Hoffmann

Hi Marc,
I have this problem too. I rebooted my Windows but no solved. You known the service name responsible for this error? You have any other sugestion?
Thank you !!!

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

I am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

HT1766 My Iphone5 wont back up , it gives me an error message Itunes could not back the Iphone5 beacuse an error occurred. What can I do

it gives me an error message Itunes could not back the Iphone5 beacuse an error occurred. What can I do

http://support.apple.com/kb/TS3221

Crystal Report Runtime Error 9.0.Could not open the report

Similar Messages

Maybe you are looking for