Crystal Report Takes very long time to display results

Dear All,
I am new to Crystal reports. We have installed Crystal report developer 2008 SP3 on Windows7 Service pack 1. We are creating reports from SAP ECC 6 EHP 4 Ready in Crystal Reports. The problem we are facing is that every report which we have developed in Crtystal reports is taking around 1 to 2 hours to display results. the reports are pertaining to only one day or one month data. we have also switch off "Verify On First Refresh", "Verify Stored Procedures On First Refresh", "Verify Database" and we are also not saving data on report level as per the threads which are already posted in the forum pertaining to our problem.
You are requested to kindly guide me how I can improve the performance of our crystal reports.
Regards,
Danish.

You select expert formula says enough. It would appear that little or no data filtering is being carried out on the database server. Thus all records will be returned to Crystal and then filtered locally.
You need to try and incorporate the logic of formula {@Form_PeriodCvn} into the select expert. Or build a view/stored procedure which returns a value compatible with your filtering requirements.
What is contents of formula {@Form_PeriodCvn}
Ian

Similar Messages

KE30 Report:-Takes very long time and ends in a Run time error

Hi Expert,
Since last three week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
What could be the reason for this and how can i resolve this.
Thanks in Advance
Bipin Tiwari

HI Sridhara
Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
Can you suggest what else we can do or is there any better way for build summarisation level in given scenario.
Best Regards
Bipin Tiwari

Crystal report with prompts takes very long time to open in infoview BOXI3.

Crystal report with prompts takes very long time to open in infoview BOXI3.1?
Is there any way to increase the performance.

Ramsudhakar,
There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
What we know. BOXI3.1
What we don't know.
O/S
App. Server
Hardware Spec's
ETC.
I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
Thanks
Bill

Query takes very very long time to display on the web portal.

HI Gurus
My query takes very very long time to display the result on the web.It takes almost 30 mins to show the
results.However when I execute the same query in analyzer it shows the result in 10 Sec.
Gurus could u please let me what r the steps required to increase teh performance of it.
What steps BI Consultant take to resolve it . Is it a portal issue.
Regards
loyee

Hi,
you can use the following parameters to the start URL: &PROFILING=X&TRACE=X. They could be set in iView of Portal as well as the url of the webtemplate. You will get information about performance of the web application.
Additional check this notes:
NW 7.0 BI Web Applications: Performance Problem Analysis
SAP Note Number: [1048691|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Performance problems when you start a query in Java Web
SAP Note Number: [950602|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Also intresting threads:
Re: Poor performance Web vs Bex
Re: BEx vs the Web : Which provides better performance
Regards
Andreas

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

Retrieving free/busy information from the server takes very long time

Hello, we are running Outlook 2010 32-bit in Windows 7 64.bit, and have encountered a strange problem, whenever we want to book
a resource (i.e. conference room) from Scheduling assistant, it takes very long time, sometimes even more than a minute to see the utilization of the room, it being stuck at "Updating schedule information. Retrieving free/busy information from the server"
The interesting thing is that most newly deployed PCs exhibits this same behavior, while older machines with basically the same setup gets the availability information almost immediately.
It is unclear whether this is a server setting or desktop issue, as all new Windows 7/Outlook machines that are deployed from the WDS-server exhibits the same slow behavior.
Please advise any troubleshooting steps to investigate the very slow retrieval lookup of free/busy information from the Exchange server.

Hi,
Does this issue occur on OWA?
If no, it means the issue is mainly related to the Outlook client.
Regards,
Simon Wu
TechNet Community Support

Portege R100: FDISK and HDD format takes very long time

I have Portege R100 and when I tried to run FDISK it take very long time to Create a DOS partion.
After running FDISK I tried to do FORMAT the HD and is taking more than 6 hours to Format hard drive.
After Format I tried to Load Win XP but it system just hanged with message Loading files...
Could some one hep me out

it's a known problem that FDisk cannot cope with the 1.8" hd in your R100
Use the method described in this thread and you will succeed :
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232

Take very long time in phase DEPLOY_ONLINE_DEPL when install EHP1

Dear all, 
I need help for anyone that read my thread. I get trouble when install SAP EHP1 for SAP NetWeaver 7.1 at our client server, in phase DEPLOY_ONLINE_DEPL(Downtime Step). The phase take very long time. It has been more than 5 hours, but there is no progress. Now, the ABAP Stack has been in MAIN_NEWBAS/GETSYNC_MODPROF_STARTED, to wait process from JAVA stack. I have check the log file drive :\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log: 
<!LOGHEADERSTART/> 
<!HELPManual modification of the header may cause parsing problem!/> 
<!LOGGINGVERSIONhttp://2.0.7.1006/> 
<!NAMEE:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_23_15_59_39\deploy_2010-08-23_15-59-53.log/> 
<!PATTERNhttp://deploy_2010-08-23_15-59-53.log/> 
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%25d%6s]:%m)/> 
<!ENCODINGUTF8/> 
<!LOGHEADEREND/> 
Aug 23, 2010 3:59:53 PM Info :DC API is trying to connect to ':50004' 
The content of log file not change after more than 5 hours, still like that. Is it normal ? Or any something miss ? 
My dead line will come tommorrow, please help me
Regards

And this the content of log file at drive:\usr\sap\DXI\EHPI\java\log: 
Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been started. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter action=deploySlot Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter connect=standard Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter errorStrategy=skipDepending Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter rule=all Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:558) [Thread[main,5,main]]: Checking phase parameters action, connect. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:570) [Thread[main,5,main]]: Phase parameters have been checked. All required 1 phase parameters have been set. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:152) [Thread[main,5,main]]: Trying to connect JSPM. Aug 23, 2010 3:59:37 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:161) [Thread[main,5,main]]: JSPM is not connected, trying to start it. Aug 23, 2010 3:59:38 PM [Info]: com.sap.sdt.util.proc.Process.start(Process.java:164) [Thread[main,5,main]]: E:\usr\sap\DXI\EHPI\jvm\jre\bin\java -ea -Xmx1024m -cp e:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar Jspm -boot=win -port=6250 -properties=jspm-srv_config.txt -startJSPM Aug 23, 2010 3:59:39 PM [Info]: java.lang.Thread.dumpThreads(Thread.java:-2) [Thread[ProcessReader,5,main]]: >> Current log directory is E:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_23_15_59_39. Aug 23, 2010 3:59:40 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.finished(AbstractToolConnector.java:373) [Thread[Process(E:\usr\sap\DXI\EHPI\jvm\jre\bin\java -ea -Xmx1024m -cp e:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar Jspm),5,main]]: JSPM terminated with exit code 0. Aug 23, 2010 3:59:41 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.connect(AbstractToolConnector.java:721) [Thread[main,5,main]]: Connected to host jktbtrsapx1 on port 6250. Aug 23, 2010 3:59:53 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:164) [Thread[main,5,main]]: JSPM was started successfully. Aug 23, 2010 3:59:53 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:207) [Thread[main,5,main]]: Trying to log in with user SAP*. 
Please help me

Time machine takes very long time

Time machine takes very long time to write the back up.
For writing 2,33 GB (from 26,33GB) it takes abou14 hours and I don't know, why it is so very slow. I work with USB 3.0 2 TB external hard disk drive.

Try Here > http://pondini.org/TM/D2.html
From Here > http://pondini.org/TM/Troubleshooting.html

This report takes a long time

Hello:
I have this report and to run it takes a long time, how can I optimize it?
thank you very much.
======= THIS IS MY REPORTS =======
{ NAMEWIDTH 15 }
{ WIDTH 15 }
{ SUPFEED }
<SUPSHARE
{DECIMAL 2}
{ NOINDENTGEN }
{ SUPHEADING }
{ROWREPEAT}
<SPARSE
{ SUPBRACKETS }
<COLUMN (Accounts,Scenarios)
"Mov_Ppto"
Real
&Esc_Rep
<PAGE("Time Periods", Years, Moneda, Periodicidad, Producto, Versions)
Producto
&Mes_Rep
&Year_Rep
Moneda
Mensual
Final
<RESTRICT(@DATACOL(1) = #Missing OR @DATACOL(2) = #Missing)
<ROW (Cliente, Ejecutivos,"Jefe de Grupo",Entities)
<LINK (<LEV("Cliente",0) AND <DESCENDANTS("CLIENTES BE"))
<LINK (<GEN("Ejecutivos",3))
<LINK (<GEN("Jefe de Grupo",3))
<LINK (<GEN("Entities",5) AND NOT <DESCENDANTS(U4728))
====== THIS IS THE INFORMATION OF DATABASE ========
Name : Plan1
Application Name : BEMP_DES
Database Type : NORMAL
Status : Loaded
Elapsed Db Time : 00:01:07:41
Users Connected : 2
Blocks Locked : 0
Dimensions : 12
Data Status : Data has not been modified
since last calculation.
Data File Cache Size Setting : 0
Current Data File Cache Size : 0
Data Cache Size Setting : 268393440
Current Data Cache Size : 2086560
Index Cache Size Setting : 307200000
Current Index Cache Size : 307200000
Index Page Size Setting : 8192
Current Index Page Size : 8192
Cache Memory Locking : Disabled
Database State : Read-write
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 90
Retrieval Sort Buffer Size (in K) : 90
Isolation Level : Uncommitted Access
Pre Image Access : No
Time Out : Never
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 1
1) Vol: f, Size: Unlimited, File Type: 3, Size: 2097152K
Currency Country Dimension Member : Entities
Currency Time Dimension Member : Time Periods
Currency Category Dimension Member : Accounts
Currency Type Dimension Member :
Currency Partition Member :
Request Info
Request Type : Data Load
User Name : admin
Start Time : Fri Apr 18 17:45:05 2008
End Time : Fri Apr 18 17:46:05 2008
Request Type : Customized Calculation
User Name : admin
Start Time : Tue Apr 29 18:32:05 2008
End Time : Wed Apr 30 04:14:37 2008
Request Type : Outline Update
User Name : admin
Start Time : Sun Apr 06 16:24:58 2008
End Time : Sun Apr 06 17:50:46 2008
Description:
Allow Database to Start : Yes
Start Database when Application Starts : Yes
Access Level : None
Data File Cache Size : 33554432
Data Cache Size : 268435456
Aggregate Missing Values : No
Perform two pass calc when [CALC ALL;] : Yes
Create blocks on equation : Yes
Currency DB Name : N/A
Currency Conversion Type Member : N/A
Currency Conversion Type : N/A
Index Cache Size : 307200000
Index Page Size : 8192
Cache Memory Locking : Disabled
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 90
Retrieval Sort Buffer Size (in K) : 90
Isolation Level : Uncommitted Access
Pre Image Access : Yes
Time Out after : 20 sec.
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 1
1) Vol: f, Size: Unlimited, File Type: 3, Size: 2097152K
I/O Access Mode (pending) : Buffered
I/O Access Mode (in use) : Buffered
Direct I/O Type (in use) : N/A

Hi
Hope you have resolved this already, otherwise, generating cost collectors would mean you are allowing cots to be posted into RE-FX using Settlement units. If there are no costs to be posted with an SU, then you do not need to run RECSSS.
Regards
MK

Query takes very long time and analyze table hangs

Hi
One of the oracle query taking very long time (ie more than a day) and affecting business requirment of getting the report in time.
I tried to analyze the table with compute statistics option, however it hangs/runs forever on one of the huge table?
Please let me know how to troubleshoot this issue

Hi,
What's your Oracle version?
You should use DBMS_STATS package not ANALYZE..
Regards,

Application build takes very long time

Recently building applications has started taking a very long time. Before, similar applications took 30 seconds or less for a build, but currently 5-10 minutes is not uncommon.
The perplexing part is how the time is distributed. The builder will spend 3-5 minutes each on the first two "processing" tasks it undertakes, namely:
Processing NI_AALPro.lvlib...
Processing NI_Gmath.lvlib...
Which amount for about 1% of the progress bar. Once it finished processing these two libraries, the final 99% finishes in about 3 seconds.
Has anyone run into this issue before? I suspect I've misplaced files for the two libraries causing the hangup and the builder is having to go searching for them, but I don't know how to remedy this situation. Any suggestions would be appreciated.

I find that when I include DAQmx in my build it can take up to 30 minutes to build an Installer. I have not seen this with builds that dont include DAQmx though.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Report take a long time in table TST03

Hi,
Our developpers have done a job to create a spool order to file. Among others, this job run the SAPLSPOX, and SAPLSPOC reports, but they takes a long time when they read or insert in table TST03.
The spool order has about 40.000 or 50.000 pages and the job can last 5.000 or 6.000 seconds. Is it normal?. If not what can I do?.
Regards.

Do you clean you old spools regularly?
Note 130978 - RSPO1041 - Replacement for RSPO0041
Markus

Crystal Report Takes very long time to display results

Similar Messages

Maybe you are looking for