Crystal report with two hierarchies

Hi everyone
I have a report request for a profit and loss statement based on data from BW with variances broken down by profit center.
We are on BW7.3 and BI4.1 - I have been looking at using Crystal for enterprise for this, however not tied to the product if you have any ideas using others. Data is from BEx queries
I have attached a picture of a mockup of the report (Figures have been removed), basically the left side (In the orange circle) is an account hierarchy for a profit and loss statement
The breakdown in the yellow circle, is the selected profit centre group (Total division) showing Budget / actuals and a variance
Then to the right of it the variance value broken down by the children profit centres in the PrCtr hierarchy (ie Exec, Finance, Proc etc)
This seems to be a reasonable request, however I'm struggling to achieve it.
I have tried using a cross-tab, however among other issues you cannot sort two hierarchies - so I either get the profit and loss hierarchy sorted correctly, or the profit centres. also I wouldnt be able to hide the Budget and actual columns for the child profit centres to just display variance
To my knowlege doing a manual cross-tab wont work, as I dont know how many profit centres live under the selected one in the hierarchy, so there is an unknown number of columns
Have tried the same in Webi, but not being able to have the hierarchy expanded by default is annoying, and I cannot get the correct formatting for the account groupings (ie bolds, indents etc)
Any other ideas on how to tackle this?
Thanks
Ryan

Dear Radhakrishnan,
Just right click on "Page Header" in left most part of your report in Design view.
Click on "Selection Expert"
Select "Details"----> Select "Insert"
The inserted "Details" will be your second page of the report.
Cheers,
Ashish Tambe

Similar Messages

  • Report with two Command is empty if one of the two commands returns no data

    Hi all,
    I have a report with two Commands not linked together.
    If ONLY one of the two Commands returns no data, the full report is empty (although the other Command returns data).
    I'm using Crystal Report 2008 and the CRJ 12.2.205
    Have an idea?

    Hi Ted,
    how can I solve the problem, please? It is important.
    If I can help yourself, the problem is appeared in many reports since I updated the library (the old library version 11.8.4.1094 works fine with all). I'm waiting for your answer, please.
    Thank you very much.

  • Report with two pages

    hi all
    I am designing a report which has two pages , i completed first page, i need to insert second page
    how to design report with two pages
    Thanks in advance
    Krish

    Hi,
    Usually,any report automatically adjusts its page numbers as per the quantity of data that needs to be displayed.However, if your specific requirement is to show certain data on one page and the remaining on another then you can simply insert a group on a valid field.
    Following is some information from the Crystal Reports Online Help menu:
    New Page After:
    - When the End of Section check box is selected, the program inserts a page break after the section.
    - The Page Header and Page Footer appear on each page.
    - Use New Page After in the Group footer section to print each group on a separate page.
    May be, if this is not what you are looking for then please elaborate on the report design/data

  • How to create user editable Crystal Report with dynamic dataset

    What I would like to achieve:
    A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
    What I do:
    CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    CrReport.Load(TemplateFilename)
    Dim Results As DataTable
    DataTable is filled from a database
    CrReport.SetDataSource(mResults)
    CrReport.SaveAs(NewReportPath, True)
    The NewReportPath is opened in the default program.
    What are the problems
    The report is open in preview mode (not in design).
    When the field is added to the report the designer asks for XML datasource on preview.

    The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

  • Crystal reports with BI

    Hi
    what is deffirence for make crystal reports with Bi and build universe and make report on Universe?
    which will be most useful
    what scenerio we use deffirent cases?

    Hi,
    Crystal reports provides you with more features regarding formating your reports. It is a more powerful but also more complex tool when compared to Web Intelligence. Normally you use CR if you want to create highly formatted standard reports. You can even embed XCelsius dashboards in a CR document. Do not forget that in order to design a CR report you need to install locally the crystal reports designer tool. Another major difference if that depending on the integration option you chose during the installation you can publish your CR reports in both the SAP BI and BOBJ system. This is helpful when you want to implement multipass report bursting and assign reports on SAP roles directly on your SAP system. As you mentioned CR reports are built using direct SAP BI drivers. You cannot build a CR report based on a OLAP (SAP BI) universe.
    Web Intelligence (WebI) on the other hand is web-based and is meant to be a tool for ad-hoc reporting. The user is able to create rather quickly appealing reports and the learning curve is rather short. Web Intelligence reports are based on universes which are created on top of BI queries or InfoCubes.
    I personally find the handling of BI hierarchies a little better in WebI when compared to Crystal Reports.
    Hope this helps,
    Stratos

  • JRC bug: apostrophe in string parameter passed to Crystal Report with Command datasource to SQL Server

    Post Author: nl11087
    CA Forum: JAVA
    A single quote/apostrophe in string parameter passed to a Crystal Report with Command datasource connecting to a SQL Server database, using sqljdbc driver does not escape the special character correctly. When doing a preview in the Crystal Reports IDE it allows you to escape the input parameter as expected and work correctly, but through the JRC component it fails. For string parameters without special sql server characters I experience no problems at all. When replacing the Command with a direct table there is also no problem.
    Reproduction:
    1. create a database db1, create a table table1 with a String type column col1.
    2. Create new report Report1.rpt, create a connection to above, Add Command using 'SELECT col1, col2, col3 FROM table1 WHERE col1 = '{?Par1}' . Add a parameter field Par1 : String
    3. In your java stand alone application using JRC add the parameter Par1 with a value "Jon Doe's Value" containing a single apostrophe. Export to PDF. (I also tried MSWord and this failed too, similar behavior). Additionally, in another test try to replaceAll("'","''") to escape it, preventing the code to break, but now it does not retrieve the expected row anymore and you end up with an empty report.
    Exception StackTrace:
    com.crystaldecisions.reports.exportinterface.exceptions.ExportException: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
    at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
    Caused by: com.crystaldecisions.reports.formatter.formatter.c: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.<init>(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.if(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.l.<init>(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.<init>(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
    ... 17 more
    Caused by: com.crystaldecisions.reports.dataengine.be: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.nr(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
    at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.aa(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
    ... 23 more
    Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.n: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.reportdefinition.datainterface.p.a(Unknown Source)
    ... 35 more
    Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
    at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.ea(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.h(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.dV(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.bc.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
    at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ae.cy(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ae.cz(Unknown Source)
    at com.crystaldecisions.reports.queryengine.b1.bc(Unknown Source)
    ... 36 more
    Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 's'.
    at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
    at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
    at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
    ... 48 more
    - JRCAgent3 detected an exception: An error occured while exporting the report
    at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)

    Post Author: nl11087
    CA Forum: JAVA
    A single quote/apostrophe in string parameter passed to a Crystal Report with Command datasource connecting to a SQL Server database, using sqljdbc driver does not escape the special character correctly. When doing a preview in the Crystal Reports IDE it allows you to escape the input parameter as expected and work correctly, but through the JRC component it fails. For string parameters without special sql server characters I experience no problems at all. When replacing the Command with a direct table there is also no problem.
    Reproduction:
    1. create a database db1, create a table table1 with a String type column col1.
    2. Create new report Report1.rpt, create a connection to above, Add Command using 'SELECT col1, col2, col3 FROM table1 WHERE col1 = '{?Par1}' . Add a parameter field Par1 : String
    3. In your java stand alone application using JRC add the parameter Par1 with a value "Jon Doe's Value" containing a single apostrophe. Export to PDF. (I also tried MSWord and this failed too, similar behavior). Additionally, in another test try to replaceAll("'","''") to escape it, preventing the code to break, but now it does not retrieve the expected row anymore and you end up with an empty report.
    Exception StackTrace:
    com.crystaldecisions.reports.exportinterface.exceptions.ExportException: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
    at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
    Caused by: com.crystaldecisions.reports.formatter.formatter.c: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.<init>(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.if(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.l.<init>(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.<init>(Unknown Source)
    at com.crystaldecisions.reports.formatter.formatter.e.p.a(Unknown Source)
    at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
    ... 17 more
    Caused by: com.crystaldecisions.reports.dataengine.be: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.nr(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
    at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
    at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.aa(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
    at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
    ... 23 more
    Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.n: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.reportdefinition.datainterface.p.a(Unknown Source)
    ... 35 more
    Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Incorrect syntax near 's'.
    at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
    at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.ea(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.h(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ap.dV(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.bc.if(Unknown Source)
    at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
    at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ae.cy(Unknown Source)
    at com.crystaldecisions.reports.queryengine.ae.cz(Unknown Source)
    at com.crystaldecisions.reports.queryengine.b1.bc(Unknown Source)
    ... 36 more
    Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 's'.
    at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
    at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
    at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
    at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
    ... 48 more
    - JRCAgent3 detected an exception: An error occured while exporting the report
    at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
    at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)

  • Link to a crystal report with prompt from xcelsius dashboard

    Hi
    How can we make a link to a crystal reports with a country promt?
    If I named the prompt ContryParam in Crystal.
    And I want to open this crystal report by sending f.eks UK as countryname to this report.
    What will the link be seeing as in xcelsius?
    How will the connection be made from xcelsius to this spesific crystal report`?
    BR
    Sadaf

    Hey Sadaf,
    This example uses prompt# to pass "CA" as a value to the first parameter:
    http://<servername>:<port>/CrystalRe
    ports/viewrpt.cwr?id=1152&prompt0=CA
    search for follwing document title for further reading
    Viewing Reports and Documents using URLs

  • Crystal Report with text(csv) data file, can we set it as input parameter?

    Hi,
    I am a new user of Crystal Reports 2008.
    I have created a report with charts in it. The input data comes from a csv text file.
    Can I set the name of this text file as an input parameter?
    as I need to generate 44 similar reports with different text filenames(and data)?
    Thank you.
    Regards

    Brian,
    Thanks much.
    I did exactly what you said.
    Just to see any change, I first gave a bad report file name just to see if I am accidentally pointing to a different file,
    but I got an error saying report not found.
    Then I renamed my original datafile name and generated a report and it still generated one without giving an error.
    Then I also gave a junk name to the logoninfo and printed that name, the new name was assigned to logoninfo, but the code did not error out.
    It ended up generating the report.
    Now here is what I think is happening,
    1) The save data in report option seems to be still on even though I have turned it off in 2 locations
    a) file -> Report Options
    b) file -> Options -> Reporting tab.
    2) For some reason the logoninfo is getting ignored as well.
    Since I did not see any answers yesterday I posted a link to this thread on the .Net forum
    Crystal Report with text(csv) data file, can we set it as input param? C#
    and Ludek Uher says that I am connecting to the text file via a DAO database engine and so need to use the same code for changing the text file as for changing an Access database.
    But the link he gave me tells me to try the same thing that we have been trying..
    Here is my plan,
    1) I will first try and find out why my save data with report option is still on ( but it shows off in Crystal ).
    2) why is LogonInfo getting ignored.
    Meanwhile any suggestions from anyone are welcome.

  • Crystal Report with text(csv) data file, can we set it as input param? C#

    Hi,
    I am new to the forums and posted a question which belonged to the .net - SAP Crystal reports group.
    Can someone help me with my problem? following is the thread that I have started.
    Crystal Report with text(csv) data file, can we set it as input parameter?
    Thank you in advance.

    Looking at the original thread, you are connecting to the text file via the DAO database engine:
    "I added the text file as follow, new connection -> Access/Excell (DAO) -> select the file and the database type as text"
    Thus I would use the same code for changing the text file as for changing an Access database. See Kbase [1218178 - Error: "Logon failed" when connecting to Access database in .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333133373338%7D.do] for more information. If that does not work, you may want to consider connecting via ODBC or feeding the data from the text file to and ADO .NET dataset and pointing the report at the dataset.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Crystal report with prompts takes very long time to open in infoview BOXI3.

    Crystal report with prompts takes very long time to open in infoview BOXI3.1?
    Is there any way to increase the performance.

    Ramsudhakar,
    There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
    What we know. BOXI3.1
    What we don't know.
    O/S
    App. Server
    Hardware Spec's
    ETC.
    I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
    Thanks
    Bill

  • Getting Error while integrating Crystal reports with Java

    Hi All,
    I am getting below error while integrating crystal report with java
    [java] os.arch = x86
    [java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
    (Ljava/awt/Image;I)V
    [java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
    [java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
    Source)
    [java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
    Source)
    [java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
    [java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
    [java] at JRCViewReport$1.run(JRCViewReport.java:50)
    [java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
    178)
    [java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
    [java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
    spatchThread.java:190)
    [java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
    atchThread.java:144)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:138)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:130)
    [java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
    Any help can be appreciated
    Kalyan

    Hi All,
    For got to mention i am using crystal reports XI release 2 with JDK1.4.
    Kalyan

  • Report With Two Heading

    Hi,
    How to create Report With Two Heading
    [http://apex.oracle.com/pls/apex/f?p=267:31:]
    thanks

    See: Re: Two level row header

  • Report with two layout

    Hi,
    I have a report with two different layouts that prints one after the other. I would like display the column hading for each layout for all the pages that records.
    To say in detail if a first layout prints fo 10 pages the corresponding columns names should be displayed in all the 10 pages. And if the second layout for 2 pages then the 2 layout headers should be displayed.
    Kindly let me know how to achieve this.

    To say in detail if a first layout prints fo 10 pages the corresponding columns names should be displayed in all the 10 pages.
    set the property to print on all pages
    And if the second layout for 2 pages then the 2 layout headers should be displayed.
    i didnot understand this

  • Crystal Report with VS 2003 How to define bar colour in design or code?Urgent

    Post Author: sterlingrelocation
    CA Forum: Crystal Reports
    Hi, I am using Crystal report with Visual Studio 2003 and i am creating a graph for user satisfaction (Excellent,Good,Satisfied,Unsatisfied). I want to define color for each bar like Blue for Excellent  and Red for Unsatisfied. I tried alot and searched all over as well but did not get any option. If somebody can help me, will be great.
    Thanks in advance.
    Sterling

    Post Author: sterlingrelocation
    CA Forum: Crystal Reports
    Hi, I am using Crystal report with Visual Studio 2003 and i am creating a graph for user satisfaction (Excellent,Good,Satisfied,Unsatisfied). I want to define color for each bar like Blue for Excellent  and Red for Unsatisfied. I tried alot and searched all over as well but did not get any option. If somebody can help me, will be great.
    Thanks in advance.
    Sterling

  • Exporting Crystal Reports with embedded Xcelsius content to PDF

    Hi,
    I have a crystal report with an embedded xcelsius chart. I would like to schedule this report using Crystal Server 2008, sending it monthly as a PDF file attached to an email. But after exporting the report through Crystal Server, the xceslsius content is just blank. Shouldn't this be working?

    What is the version of Adobe Reader? Adobe Reader 9 should be there.Also check whether you have Flash Palyer/ flash Active X control installed.
    If you can view the dashboard after exporting it to PPT,it means you have Flash Player installed. You need to try with Adobe Reader 9.

Maybe you are looking for