Crystal Reports 2008 Fix Pack 2.8 file is corrupt

Hi,
I tried to download and install the Crystal Reports 2008 Fix Pack 2.8 but each time the extractor tell me that the file is corrupt.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Thank you

Sent the the upload team also.
Try the MSI package to see if that works for you.
And please post new issues in new posts. This one if fixed.
MSM's have been re-uploaded.
Thank you
Don
Edited by: Don Williams on Jun 18, 2010 9:04 AM

Similar Messages

Crystal Reports 2008 Fix Pack 1.7 - Redist Install - Corrupt

In an attempt to resolve ongoing issues with running Crystal Reports on my Development Server I tried to download Crystal Reports 2008 Fix Pack 1.7 - Redist Install today.
When I attempt to open the zip file, I receive an error stating the zip file is corrupt.

I have read the sticky, however it does not address my issue. I am not getting Crystal Reports run time errors or any other run time errors. Sticky states that I should not use the 1.1 - 1.7 redists if I have 'older' versions of Crystal Reports on my system.
I am stating that the zip file is corrupt. By that I mean, I cannot extract any files from the zip file because the zip file itself is broken.
When I try to open with 'WinZip' the error message I receive is:
"Cannot open file: it does not appear to be a valid archive."
I have downloaded the file twice.

Crystal reports 2008 Fix Pack 2.4 Release Notes

It seems to be impossible to find any release notes for any of the fix packs. Can anyone point me to them?
Also if it's anyone from SAP reading this why are release notes not distributed in the downloads section or a link to them. It's a ridiculous situation not being able to find them, how are we meant to know if issues are fixed we raise or about fixes we should be installing and are not even aware of.

Filtering by Crystal Reports | Crystal Reports 2008, I see the items listed below. I cannot find any release notes.
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.4 - Click Once
ZIP
50.372
Windows
English
22.01.2010
Crystal Reports 2008
Hot Fix
Crystal Reports 2008 SP2 - Fix Pack 2.4
ZIP
254.688
Windows
English
22.01.2010
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.4 - Redist Install
ZIP
84.228
Windows
English
22.01.2010
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.4 - Merge Modules
ZIP
117.236
Windows
English
22.01.2010
Crystal Reports 2008
Other
Crystal Reports 2008 SP1 - Hungarian Language Pack
ZIP
13.008
Windows
English
04.01.2010
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.3 - Redist Install
ZIP
84.136
Windows
English
30.12.2009
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.3 - Click Once
ZIP
50.292
Windows
English
21.12.2009
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.3 - Merge Modules
ZIP
117.024
Windows
English
21.12.2009
Crystal Reports 2008
Hot Fix
Crystal Reports 2008 SP2 - Fix Pack 2.3
EXE
175.176
Windows
English
18.12.2009
Crystal Reports 2008
Utility
Crystal Reports 2008 Fix Pack 2.2 - Merge Modules
ZIP
114.168
Windows
English
03.12.2009

Crystal Reports 2008 Fix Pack 2.7 - Merge Modules Dependencies

What version of the Visual C++ 8.0 Merge Modules is the latest Cyrstal Reports 2008 Fix Pack 2.7 looking for? I'm having issues getting the dlls to register.
CEReportSource.dll failed to regester and so on . . . .
I'm using InstallShield 2008 with a Visual Studio 2008 (but I have access to the Visual C++ runtimes from previous versions).
Regards,
Mike

Search forums before posting. You are likely missing the C++ runtime distribution package on the destination OS.
Other posts have the Microsoft link to get them and include them with your package.
CR 2008 also requires 1.1 and 2.0 framework to be installed.
Use Dependency Walker on the dll that won't register and it should tell you what is missing.
Thank you
Don

Installing Crystal Reports 2008 fix pack 2.6 is breaking Crystal 2008 exe.

I have a package created to deploy Crystal 2008. I have included in my package SP1 and SP2 and that all works great. However, the issue is when I push fix pack 2.6, once that is pushed, and done running, then I try and open up Crystal 2008 I get an error that says, the exe can't be found or is corrupt, try to reinstall the program again. I can get the fix pack 2.6 to work fine when I manually install it. Is this an issue because fix pack 2.6 has to self extract first?
Please let me know what I can do to get everything working in the package, so I don't have to manually run the fix pack 2.6 manually.
Thank you.

What you are doing is not supported at all and may be a violation of the licensing. For users to get Crystal Reports Designer they must purchase a copy from SAP sales only unless you are an OEM partner and licensed to distribute in this way.
In all cases though we don't support building your own MSI in this way, only for distributing the runtime for an application you wrote. Installing Crw32.exe must be done from one of our CD's.
Please explain why you are building the MSI this way and if you are OEM Partner? If you are an OEM who is Account Manager here?
Thank you
Don

Crystal Reports 2008 Fix Pack 3.5 (Bad Fixed Issues Document)

The document available at
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f06b7148-0f52-2e10-e4ad-82ed9e94c350
doesn't list any fixed issues for 3.5. The latest fixed issues listed in that document are for Fix Pack 3.4
Is there a corrected document somewhere?

Hi Ido,
I went through the BOE PDF and these are all I found for just CR 2008 FP 3.5 and not completely sure if they do anything for CR Designer. They may only be affect in BOE.
Here's is the info:
ADAPT01472419
Description:
When a report uses a "For each record" chart, and the report data is sorted on a formula field, after a report refresh the record order in the chart may not match the record order in the report.
The cause of the problem is that the chart is refreshed before the sort order is applied to the report.
To solve the problem, upon a refresh, the formula field in the report is sorted first, before the "For each record" chart is regenerated.
ADAPT01495638
Description:
The label for Summarized Field in a crosstab is always the database field name.
To solve the problem, users can click Options > Database >Tables and Fields, and then select the option to either display the
database field name, description, or both for the Summarized Field Label of a crosstab.
ADAPT01497827
Description:
When exporting or scheduling reports to PDF, an error may occur.
ADAPT01498515
Description:
When exporting a wide-page report to text format, report field headers in the page header may either be missing or wrapped.
ADAPT01503419
Description:
Reports that have linked subreports may run more slowly than usual.
This problem happens when the report contains no data. Despite having no data, Crystal Reports attempts to run the subreport, and this extra processing reduces performance of the report.
Thanks
Don

First Page blank -Crystal Reports 2008 Service Pack 1 install issues

Hi,
After installation of Crystal Reports 2008 Service Pack 1 - Redist Install on Web server. First page of all the reports are blank .But when next page is clicked next page displays information ,then previous page the report displayed.
On loading the first page of the report is blank.
The report is fine in Crystal reports
After navigating to the second page - the data on the second page appears with no issues -
Then Navigate back to the first page then the first page data appears.
Thanks in advance .
Regards
Prakash

Just to clarify why this needed to be done. The CR msm and msi files install the correct files into a bin directory. The bin directory is specific to the version of Crystal Reports. Also, the viewer files are installed into the default web site aspnet_client folder. Thus if an application is installed into a custom website, you will have issues, such as red X-es instead of images, errors, failure to load report, etc. For more documentation on this issue see these articles:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80
Ludek

Can not download crystal report 2008 Service Pack 1 Version 12.1.0.892

I can't download crystal 2008 sp1 from
https://smpdl.sap-ag.de/~sapidp/012002523100006555792009E/cr2008win_sp1.exe
and I got follow message
Error Message - ObjectID not existant
What happened?
ObjectID not found in R/3
What can you do?
Check your ObjectID
Error code: SAPSMPDL2A-20110626101415-0014
Error details: 10021DD9-702/1A053/3162-63F0D6C5-3CB8B45-2992FF
Service Name: SAPIDB
Service Server: SAPSMPDL2A
Process-ID: 1608
Thread-ID: 4360
Sorry for any inconvenience.
Your SAP Service Marketplace Team

Hi,
If you just need to download CR 2008 SP1, why don't you download it via the Support Portal
Support Portal -> Software Downloads -> BusinessObjects Downloads -> Support Packages and Patches -> C -> Crystal Reports 2008.....
If you don't have access or can't see the path mentioned above, you may need to request for access first.
Regards,
Ken

Probleming Installing Crystal Reports 2008 Service Pack 1 to Vista 64bit OS

Hi There,
Whenever I attempt to install SP1 to Crystal Reports 2008 I am unable to get past the disk space check. It just continues to display the message below.
"please wait while the installer finishes determining your disk space".
I found this to be an issue on the 64bit OS only because I can install to Vista 32bit no problem.
Please help.
Thanks
Mark

Hi Mark,
Try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Now try to install Crystal reports.
Regards,
Shweta

Crystal reports 2008 Service Pack 1 Error

My reports worked when I was using the packaged Crysatl REports from Visual Studio 2008. However it was slow, therefore I had Service Pack 1 installed and now I'm getting the following error:
'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. ---> System.Runtime.InteropServices.COMException (0x800736B1): Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 800736b1.
Any ideas?
Thanks in advance!
LIsa

I created a new application and I still get the error on the web server. It works fine of my development box.
The report that I am testing again is simple and only has one text object...
Any ideas what is missing????
Thanks agin
[COMException (0x800736b1): Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 800736b1.]
   CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +207
[TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.]
   CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0
   CrystalDecisions.CrystalReports.Engine.ReportClass..ctor() +18
   Reports.rptStatement..ctor() +60
   Reports.PrintReport.Page_Load(Object sender, EventArgs e) +57
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint

Error in Crystal Reports 2008 Runtime Version = 12.2.3.467

Dear Support Team
 
 
I am making the setup for our application using InstallShield 2010.
 
 
I recently updated the crystal reports 2008 runtime to version = 12.2.3.467.
 
 
Based on this article
 
 
 
 
Topic of the week (October 15, 2009)
 
Date time field is blank when using ADO .NET dataset and Crystal Reports 2008, Service Pack 2.0
 
This is a new issue, very specific to CR 2008 and SP 2. Date time fields are stripped out of a report (or not
 
visible), if a report is consuming a .NET dataset which contains a date time field. A technical escalation has been
 
submitted and a work-around is detailed in note number 1392258
 
 
 
Since DateTime Column was not getting displayed in the deployment machine when running the report.
 
 
So I downloaded the Crystal Report 2008 FP2.3 and merge module for the same and installed on my development machine
 
 
where I am making the Setup.
 
 
I am able to make the setup successfully without errors, but when I try to install the setup on the deployment machine I am getting
 
the errors as
 
 
Error 1904.Module C:\Program Files\BusinessObjects\BusinessObjects Enterprise 12.0\win32_x86\CEReportSource.dll
 
failed to register
 
Same message pops up for N number of Crystal Dlls with message failed to register.
 
Even though as per article in your forums I am doing everything right.
 
I have correct Dll for VC++ 2005
 u2022
 
Microsoft_VC80_ATL_x86.msm; version 8.0.50727.762
 
 
u2022 Microsoft_VC80_CRT_x86.msm version 8.0.50727.762
 
 
u2022 Microsoft_VC80_MFCLOC_x86.msm; version 8.0.50727.762
 
 
u2022 Microsoft_VC80_MFC_x86.msm; version 8.0.50727.762
 
 
u2022 Microsoft_VC80_OpenMP_x86.msm; version 8.0.50727.762
 
 
With exactly same versions as mentioned in the article.
 
 
I followed the article in your forum
 
Building a deployment project with Crystal Reports 2008 (12.1.0.892) SP1
 
Posted on Mar. 09, 2009 08:22 AM in Business Objects
 
The same sort of errors is coming but I am doing everything right as per that article.
 
 
To Inform you further before updating crystal reports 2008 runtime to version = 12.2.3.467.
 
 
Everything was working fine, only problem was that Date Time column was not displaying at runtime on the deployment
 
 
machine.
 
 
With Regards
 
Arshad
Edited by: arshhb on Dec 29, 2009 7:11 AM

Dear Mr. Williams
I dont think this is the issue related to MS Installer. Still based on your suggestion I downloaded the latest MS Installer from Microsoft Website and Installed on my setup machine and made the new setup with zero errors and warning.
The deployment machine is having full rights and so there is no security issues related to installation even though to clear the confusion I installed the setup on three other xp machines the result was same even after installing the latest MS installer on those machines as well.
I wanrt to remind it again since I was facing the DATE TIME column Issue problem in reports on deployment machines so I updated the Crystal Reports TO CRFP 2.3 EXE AND MSM as mentioned in your forums regarding this known bug that if datetime column is getting from dataset then that column was not getting displayed.
From that time onwards I am unable to install the setup on the deployment machines and I am getting errors unable to register errors crystal reports dlls.
Apart from that I downloaded Crystal Reports 2008 Fix Pack 2.3 - Redist Install (cr2008_fp23_redist.zip) from the download page but i can't open it I am gettinig the error message doesnt appear to be a valid archive.
Please help me and provide me some solution regardeing the issue I am stuck with.
With Regards
Arshad

How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???

Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue??

Crystal Reports 2008 crashes with blanked out areas when downloading data

We have a pc installed with Crystal Reports 2008 v1 SP2, which is used for report creation, but after a few minutes of downloading data from the server to populate the report, the report crashes with black areas instead of data in the report. Please can anyone offer possible solutions?
Pc: workstation
Os: Microsoft Windows XP Professional 32 bit
Processors: 1 Intel Core(TM) i5 CPU 650 @ 3.20 Ghz
Total Memory: 3264 Mb
Total Hard Drive: 298 Gb
Display 1680 x 1050 pixels 65536 colours]
Display Adapters: Microsoft 4.0.5733.0
driver date: 2-28-2007
Crystal Reports version: 12.1.0.883
Crystal Reports 2008 SP2
Oracle in OraHome111
file version: 11.1.0.6.0
driver_ODBC_Version: 03.51
connects to remote server on site with Oracle 11g database, via above ODBC driver.
Many thanks, any ideas would be appreciated!
David

Hi David,
I've seen this before, your Video driver is out dated and you need to update it. Typically the makers of the mother board or video card, which ever one you are using, will have updates for your specific OS. Appears you are using the default Window generic video driver which may not support what CR requires or you have an older usp10.dll. You will likely get a new one if you install Windows XP Service Pack 3.
Also, Crystal Reports version: 12.1.0.883 is SP 1 and not SP 2., second number is the Service Pack, 12.x.x.x.
Download SP 4 and see if that may help:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
Or incrementally:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
And you may need SP 3 or if you want to start off clean download the full build of SP 3 and then SP 4. Requires the keycode so make sure you have it, we can't give you a new one.
Don

Deploy Crystal Reports 2008, VS2008, Windows Server 2008

Hi All,
I'm looking for guidance on how to deploy a web application developed on VS2008 - I've installed Crystal Reports 2008 (trial version). So in affect crystal reports is integrated in the web app.
So now I want to deploy to our web server to complete the POC.
I've no idea what I need to do to deploy. I installed my trial version of CR2008 on our server and moved the web app onto it as well. Web App running fine under IIS7. I've added the folowing to my web.config
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Is this the correct way to deploy?
I am getting the following error .... any help much appreciated
Regards,
Sinead
Server Error in '/' Application.
Invalid file name.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Invalid file name.
Source Error:
Line 30: }
Line 31:
Line 32: repDoc.Load(Server.MapPath("") + "
DailyNumbers.rpt");
Line 33: CrystalReportViewer1.ReportSource = repDoc;
Line 34: ParameterFieldDefinitions crParameterFieldDefinitions;
Source File: c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs Line: 32
Stack Trace:
[COMException (0x800001fb): Invalid file name.]
 CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[CrystalReportsException: Load report failed.]
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +419
 CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +894
 CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +84
 WFDailyNumbers.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs:32
 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
 System.Web.UI.Control.OnLoad(EventArgs e) +99
 System.Web.UI.Control.LoadRecursive() +50
 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627

I downloaded Crystal Reports 2008 - Service Pack 3 Full Build - that wouldn't install
Downloaded Crystal Reports 2008 - Service Pack 3 - which installed successfully.
I now have ....
Crystal Reports 2008 Runtime SP2
Crystal Reports 2008 SP2
Crystal Reports 2008 SP3 Update
I found another thread similar to the error I am getting which recommended adding Everyone to the Permissions on the C:\Windows\Temp folder. With this set, when I try to navigate to the report on the web app I don't get the error as before - but the application just sits there and spins it wheels and nothing happens. When I take off this permission I am back to the previous error.
Theres nothing revealing in the eventlogs that I can see.
Do you think this could be down to IIS just not knowing what to do with a .rpt file?
In the web.config
<httpHandlers>
<add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</httpHandlers>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode"/>
</handlers>
Regards,
Sinead

Report and Field Explorer dont work in Crystal Reports 2008

Hi
I am using the following versions of Crystal Reports:
Crystal Reports 2008 (Service Pack 1)
CR Developer
Version 12.1.0.892
Product Type: Full
Target environment: .NET 3.5 windows forms and asp.net application
Since a couple of days, i can no longer access the field explorer nor the report exlorer. Anything else seems to be working fine. I first thought these windows were somewhere hidden behind another window but as much as i searched, i didnt succed in finding them :-(. Our product has a valid licence and is registered, by the way.
My question is now, what do i have to do to get my field/report explorer again. Maybe, installing the latest service pack had an influence, but i cannot tell for sure.
Any help is appreciated
Thanks in advance

Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
Your query appears to concern the CR designer. As such, please post your query to the Crystal Reports Design Forum:
SAP Crystal Reports
Ludek

Crystal Reports 2008 Fix Pack 2.8 file is corrupt

Similar Messages

Maybe you are looking for