Crystal Reports 2008 - SAP B1 Integration

Hi
I had received the CD from SAP which contained Crystal Reports 2008 Basic for B1. The installation went very ok and i am able to Launch Crystal reports 2008 from outside SAP B1. (Program File, Business One, Crystal 2008)
However, i do not see the SAPCrystalSetup.exe either in the CD i received or on the portal to download anywhere. (Which is used for integrating SAP B1 and Crystal report). This utility according to the technical tips for installation mentioned in https://websmp103.sap-ag.de/~sapidp/011000358700000727712008E.htm will enable SAP B1 menu with Crystal reports integration sub menu options
Can any body help
regards
Manian

Hello Manian,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Similar Messages

Crystal Report 2008 and SAP B1 8.8 Cannot import as report

Dear Friends,
I has a problem a bout crystal report 2008 SAP with SAP B1 8.8 cannot imported as "Report", if imported as "layout" crystal report working fine, any solution for this, i'am using SAP 8.8 PL 10 if any bug with crystal report in this page level?
did any body now the solution?

Hi,
Try in other way, Open rpt file.
In Add-in menu > SAP > Save
provide necessary detail (Company Name,License Server,SQL User/Password)
"save as per your need"
Try to generate by this way...
Thanks
Shamseer

Crystal Reports 2008 Redistribution on 64 Bit Server

I have a small application that uses Crystal Reports 2008 in not-integrated mode. Meaning that the .rpt files are seperate from the web application and the web application has to know the absolute path to the .rpt files before it can run them. My question is how do I deploy Crystal Reports 12 to a windows server 2003 x64 server? I have installed the redist.msi and the reports won't work I keep getting the following error:
Server Error in '/imacs' Application.
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.]
   CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime() +411
   CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +220
[TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.]
   CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0
   imacs.imacs.viewPrint.lnkView_Click(Object sender, EventArgs e) in C:\inetpub\wwwroot\imacs\imacs\viewPrint.aspx.vb:186
   System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e) +131
   System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +140
   System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +39
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3215
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
My only guess is that there is some configuration I am not doing on the server. Can someone help me?

I think the frustration is coming more from the combination of lack of support for x64 (quite surprising for such an established product) combined with a site that's very difficult to navigate and use (the BusinessObjects site).
We ourselves have also just invested a great deal of time in building some Crystal Reports for a pilot system for a large US Insurance Company and cannot choose to avoid a 64-bit target server. We deploy at the end of next week and though we can compile deliberately for 32 bit as outlined in your post, this causes all sorts of other issues with other assemblies we are using that are not binary compiled for a specific platform and that we cannot ourselves recompile.
To be concise, your posted solution is not really a solution unless a number of other assumptions are true that we all know in practical terms to be unrealistic for anything but the simplest of apps.
For us, pulling Crystal at this point is embarassing for the customer (they specifically requested that we use it) and for Business Objects, and creates a deadline crunch in our project plan as we convert to Telerik or some other x64 solution.
We will certainly follow up with phone support to see if there are other choices (doubtful), but given that you offer a trial version of Crystal 2008 I think it's remiss that there are no clear guidelines in a publicly-reachable forum that discuss in detail how to deploy completely to x64 including ensuring that other related issues to using a 32-bit compilation on x64 are mentioned/covered. I certainly can see that even an advanced developer would continue to hold out hope that there is some configuration option combination that will work.
Finally, can you provide any guidance on when Crystal Reports will catch up to Windows 2000, 2003 and 2008 and provide a 64-bit runtime?

UNABLE TO IMPORT CRYSTAL REPORT IN SAP B-1

Hi all!
I am using Crystal Report 2008 for SAP B1 8.8, Currently I am not able to import any .RPT file to SAP-B-1,
I has a problem a about crystal report 2008 SAP with SAP B1 8.8 cannot imported as "Report", if imported as "layout" crystal report working fine, any solution for this, i'am using SAP 8.8 PL 13
did any body now the solution?
Thanks
DINESH CHANDRA

Hello, Sorry you have the wrong forum and I can't move it to the B1 forum.
/community [original link is broken]
Thank you
Don

Crystal Report 2008 included with SAP integration Kit

Hi
We want to know the crystal report 2008 come with SAP integration Kit

Take a look into the following document:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948
It might help.

SAP Integration Kits 3.0 with Crystal Report 2008

Hi,
I have installed Intergration Kits 3.0 and Crystal Report 2008.
I open the Crystal Report Designer from Start >Programs >Crystal Reports 2008 > Crystal Reports 2008.
As mentioned by Ingo, I have ticked the MDX driver setting via SAP menu option.
I clicked on u201CCreate New report from queryu201D
Selected the fields from the Query and placed in the report.
When I click on Preview button, I hits the following:
Database Connector Error: u2018Function module u201C/CRYSTAL/MDX_GET_STREAM_INFOu201D not found.u2019
Another problem that I encountered is when I can only enter UPPERCASE for my SAP BW User ID and Password in Crystal Report (when I try to logon into SAP BW in Crystal by clicking on the u201CCreate New report from queryu201D). So I need to change my password to Uppercase in BW.
Have you encountered this before? I guess it is related to installation problem? Should I uninstall and reinstall again?
Please advise, thank you.

Hi,
So I just need to send the neccessary files mentioned in transports_EN.txt to my basis guys with your instruction. Then I should be able to use the MDX driver in crystal reports already?
Correct!
the SAP BusinessObjects documentation (and Ingo) mentions that the transports have to be imported. HOW to do this is an SAP Basis administration related issue and is NOT described in the BusinessObjects documentation.
As far as I know the appropriate files (there is a dependency related to the version and the type (BW or R/3) of your SAP backend system) described in transports_EN.txt) have to be copied in the directory which is set to be the tranport queue for your SAP system and then the admin can use the STMS transaction to import them.
NOTE: In a BW system you have to import BOTH the SAP Basis transports AND the SAP BW related transports. That means you have to import in total 9 transports = 18 files
Regards,
Stratos

Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
I am a newbie at development in visual studio. Any help will be highly appreciated.
Thanks,
Rajib

Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
Look in the registry for HKLM\software\business objects and remove the business objects entry.
Download CR 2008 from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup

Problems with consuming SAP BW WSDL in Crystal Reports 2008

Hello,
I am trying to use the WSDL generated from the SAP BW in Crystal Reports 2008 using the XML and Web Services driver, but when I input the WSDL url Crystal does not interpret the url passed in as a WSDL url and the Services, Port and Method drop downs are blank.
If I manually input the values I get the error below from Crystal
"Logon failed.
Details: Web Service Location is invalid
WSDL Exception (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL:Encountered unexpected element
'Policy'."
I know this is a valid WSDL as I have tested it with Xcelsius 2008 and I am able to get data back in Xcelsius. I found SAP note 1485601 that talks about Crystal Reports not being able to reading a WSDL generated by a SAP system.
           https://websmp230.sap-ag.de/sap/support/notes/1485601
Based on the error message from Crystal above I feel that Crystal is unable to read the WSDL URL, has anyone else encountered this issue, if so is there a possible work around.
We are running Crystal Reports 2008 V1 SP3 FP 3 and the SAP Integration Kit is also on the same service pack and patch level.
Any help or insight into the issue will be very helpful.
Thanks,
Kumar

Ingo,
I am using the "XML and Web Services" connection option in Crystal Reports, and using a HTTP WSDL.Here is a sample of how WSDL url generated by SAP BW.
http://servername:8000/sap/bc/srt/wsdl/bndg_DF6E553E117931F19C6B001560A1B616/wsdl11/allinone/ws_policy/document?sap-client=100
We have a two structure BW query (one for keyfigures and one as characteristic structure ), I know that this will cause the structure for the characteristics to show up as a single field and each element of the structure will result in a row of data, but we need the individual elements on the structure and we were hoping to get around the MDX driver limitation by using the web service connection.
The data in the Crystal Reports 2008 needs to be in a crosstab layout as shown below, but if we use the Crosstab expert the key figures are stacked one under the other and also we cannot get the labels from the KPI structure to show up on the Crystal Reports.
               Characteristic Structure
             Column1            Column2                     Column3
Label 1          KeyFigure 1          KeyFigure 2                    KeyFigure 3
Label 2          KeyFigure 1          KeyFigure 2                KeyFigure 3
Label 3          KeyFigure 1          KeyFigure 2                    KeyFigure 3
This layout is already built in a Web Template and therefore we were planning on using the WSDL to get the layout directly into Crystal report, but I keep running into the WSDL error when I try to consume the WSDL in Crystal.
Thanks,
Kumar

No SAP Datasources or SAP Toolbar in Crystal Reports 2008

I cannot see the SAP toolbar or SAP datasources under "Create New Connection" in Crystal Reports 2008 SP1.
After reading many threads on SDN and reistalling Crystal Reports 2008 SP1 and the BOBJ SAP Integration Kit many times I have not been able to get this to work. I have installed the following in order:
- SAP GUI for Windows
Release: 710
Build: 1046700
Patch Level: 12
includes the BW 3.5 AddOn and BI 7 AddOn
Crystall Reports 2008 SP1 which I installed all components except Legacy XML Export.
Business Objects XI Integration Kit XI 3.1 for SAP which I installed all desktop components and all server components excluding web content and SDK. This was a local install on my PC.
I have ensured that I have only one instance of SAPLOGON.ini on my PC.
I have not applied the transports yet because I want to see the SAP datasources and SAP toolbar in Crystal Reports before I progress.
We do not have Business Objects Enterprise and I'm not sure what "BOE 3.1 Client Tools" is referred to earlier in this thread. My understanding is that in addition to SAP and BW we just need Crystal Reports 2008 and the SAP integration kit.
We are on ECC6 and BW 3.5.
I hope someone can help.

Hi Stratos,
Thanks for your response. I finally got this working. My issue was that I originally used the Crystal Reports 2008 and BOBJ Int Kit downloads from the SAP support portal. I checked with another SDN user Steven Dierick - thanks Steven - for the version of Crystal Reports 2008 he was using (version 12.0.0.683).
I downloaded Crystal Reports 2008 version 12.0.0.683 and the BOBJ Int Kit from the downloads section of sdn and it works!! SAP Toolbar, datasources and everything.
Considering I'm using Crystal Reports 2008 SP0 are there any disadvantages of not using Crystal Reports 2008 SP1?
If I'm better off using SP1 where should I download Crystal Reports 2008 SP1 and the appropriate BOBJ SAP Integration Kit?
cheers,
John

[Crystal Reports 2008] - Logon failed in SAP system

Hi everybody,
I have installed on my notebook Crystal Reports 2008 trial version and the Integration Kit for SAP Solutions that I found on this web page: https://boc.sdn.sap.com/node/18962
When I try to open a SAP Data Source, Crystal Reports finds the connections I have in my SAPLogon and ask me credential infos. I get the following credential error:
"You do not have the necessary rights to design reports against the SAP System"
The user I enter has full administration right on the system, which is a SAP R/3 Enterprise.
Thanks,
Valerio

Hello Valerio,
Please make sure you install the corresponding transports for the Driver you are trying to use in Crystal Reports.
The transports are available on the SAP Integration Solution CD.
thanks
Mike

Can we use Crystal Reports 2008 tool to directly reports on SAP R\3 data?

Hi,
Can we use Crystal Reports 2008 Designer to directly reports on SAP R\3 data without any additional Integration Kit for SAP?
I believe the Integartion Kit is only for reporting on SAP BW data.
Thanks in advance for your response and any additinal details you can provide.
Thanks,
Sri

Please post this query to the Crystal Reports Design forum:
SAP Crystal Reports
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Integrate the Crystal Reports 2008 SP1 with SAP R/3

Hi Experts,
I have a requirement to integrate Crystal Reports with the SAP R/3 . I'm new with this kind of integration and need help because I need to create a report based on the R/3 data.
I have read some posts from this forum especially on the integration kits - SAP forum but still don't have any idea on how to do it?
I already installed the BusinessObjects Enterprise XI 3.1 and also Crystal Reports 2008 SP1. I also download the Integration Kits -SAP installer from the SAP Marketplace but when I tried to installed it, I get stuck because it need information for BW publisher.
As for your information, we don't use any BW server because we only use R/3.
Can anyone help me where to start on this integration?
Thanks,
-Syahida-

Hi Stratos,
You're right regarding the transport files. My basis team able to transport that file but when I try again to connect from Crystal Report to R/3, it come out with other error like " Connect to SAP gateway failed" and " partner 202.171.46.161 :3300 not reached"
What I did were :
a) Click on blank report
b) Create New Connection
c) SAP Tables, Cluster
Did I do any wrong here because the error cameout after I did all the step above ? When I look out on the error, it seems like it need to use port 3300. Is there any specific port required for the integration? This is because if the integration through SAPGui, it should used port 3200 and if go direct using SAPRouter, it will use port 3299.
Really need your expertise here or any document that I can refer because the standard document for integration kit for SAP did not mention anything about the port.
Thanks and Regards,
-Syahida-

Crystal Reports and SAP Integration Issue

Gurus,
I am in the process of reinstalling my SAP B-One(2007 A) Server, after SQL Server and SAP Server and Client installtions and its related patch PL10. My machine is fully loaded and to go, but I am stuck with Crystal Reports Basic 2008 installtion.
After installting the below for Crystal Reports:
1) .NetPlatform SP1 setup (dotnetfx35sp1)
3) Crytatl Runtime
4) Crystal Setup
5) Crystal SAP Viewer
6) CR2008_SP3
My integration between SAP and CR are fine but after first log off and log on of SAP B-One.
Shows the below messages:
- "The new version of Add-on Crystal Reports for SAP Business One is
installed. Upgrade the Add-on in the current Common DB."
followed by the below one.
"Wrong Executable digital signature for Add-On".
Any advices on how can I upgrade the Common DB.
Faisal

Hi Faisal,
Is this issue realted to the previous thread you have posted. It looks similiar.
Re-installation meaning that you had installed aprevious version and now upgrading or is it a full installation.
Regards,
Rakesh N

How to connect Crystal Report 2008 server with SAP BI/BW server

Hi ,
I have downloaded the 60 Days trial version of "Crystal Report 2008 Server' from sap site to my machine. Now i would like to connect this Crystal server with SAP BI and want to use the data of BI Bex queries and Infoproviders.
Can you please guide me how to connect them?
Aslo how can i get the free trial version of Intergration kit ..here please provide me the entire full path of site(to download the Integration Kit).....
Any inputs would be appreciated!!
Regards,
Naween

Hi Michelle,
Older versions of CR would allow you to run CR from a network share point but you still had to have a license for each user. Current versions of CR do not allow you to do this any more, possibly using a Citrix or Terminal Server would allow this but you still need a license for each user. Older versions had a Network install option.
And as suggested exporting to PDF or some other format is fine for end users viewing your output. They are not using CR but Adobe Reader or Word etc. to view the reports, they just can't use the Designer to view the reports.
Hope this is clear now?
Thank you
Don

Connecting Crystal Report 2008 to SAP SRM

Hi all,
I have a customer that would like to use Crystal Reports 2008 to report SAP SRM data. Is this possible? We already have the integration kit.
What steps must I take?
I know to connect Crystal to SAP CRM all I have to do is import the ERP transports on to the SAP CRM application server. Is the process the same with SRM?
Please advise.
Thank you in advance for your help.
Jenny

Hi Jenny,
For now I'll move this post to the Integration kit forum. Some of our engineers are getting trained on connecting SAP datasources so for now your best place to get an answer is likely the Integration kit forum.
Thank you
Don

Crystal Reports 2008 - SAP B1 Integration

Similar Messages

Maybe you are looking for