Crystal Reports 2008 Trial crashes; crw32.exe error; any fix?

I downloaded the trial for Crystal Reports 2008 and I can open the application fine, but when I go to create a report and click on the u201CCreate New Connectionu201D for the database I get a Just-in-time error for crw32.exe and my application shuts down.
Iu2019ve been trying to look for a resolution in your forums but could not find anything. I check for updates it says there are none; I've uninstalled and reinstalled already didn't fix it; I've download sp1 manually and installed but no luck.
I do have MS SQL Server 2008 installed on my system, could this be causing some problems?
I'm running Windows XP, also have VS .NET 2003 installed, but I'm only wanting to use CR 2008 application.
Similar to this existing problem: An unhandled Win32 exception occurred in crw32.exe 5048. Crystal 2008 Crash
I cannot uninstalled SQL Server 2008 because I need it.

Hi Henry,
Crystal Reports 2008 is not officially tested with SQL Server 2008.
Try with this:
1. Reduce the 'Hardware acceleration' setting in Microsoft Windows.
2. To access the 'Hardware acceleration' setting in Microsoft Windows:
Click Start > Settings > Control Panel > System > Display > Settings > Advanced > Troubleshooting.
There are typically six possible settings for 'Hardware acceleration': from 'None' to 'Full'.
If you are using Dual monitor run the CR application on primary monitor cause Dual monitor is not tested with CR.
If still the issue occurs then manually un-install and reinstall the application.
Regards,
Shweta

Similar Messages

Crystal Reports 2008 Trial Version Runtime Error

Hello
Yesterday I've downloaded Crystal Reports 2008 (Trial Version). The installation was successful. I've got no error.
Anyway, I'm unable to start Crystal Reports. I get the following error:
Microsoft Visual C++ Runtime LIbrary
Runtime Error!
Program: ...ects\BusinessObjects Enterprise 12.0\win32x86\crw32.exe
Abnormal Program Termination
I've already tried all "solutions" mentioned in Re: Crystal Reports 2008 trial version ERROR (DEP, HW acceleration, etc.) but without success (I'm running Windows XP with SP2). I've also updated Microsoft Visual C++ 2005 resp. 2008 redistributables...
Can someone help me?
Thank you!

Hi Patrick,
Nothing Strange about it. You need local Admin rights to access registry and other parts and CR needs the same.
Check anti-virus or possibly firewall settings. When you installed did the installer ask you to allow All users to run CR?
You may want to check with your IT guys, they may have modified your local user group to not allow some rights.
Bottom kine is your PC security is blocking access that CR needs under your local user account.
When you do try to run it does UAC pop up a message to allow you to run CR Designer? If not then it may be you have customer settings for that also.
Search Microsofts site on more info on user rights.
Thanks
Don

Problem with keydecoder.dll in Crystal Reports 2008 Trial Version

Hello,
My company is interested in purchasing Crystal Reports 2008 and has asked me to download and try the trial version. However, I have been running into a keydecoder.dll problem. Setup was smooth and here are the details:
Problem message:
"Crystal Reports: Application Error Couldn't load keydecoder.dll"
I have Windows Vista and I have already configured all permissions and administrative rights to the problem to full control. I have also attempted to drag the keydecoder.dll application extension out of win32_x86 to the file folder crystal reports 2008. I have also already attempted to reinstall and making a new program file location named 'Crystal Reports 2008'.
I'm running out of ideas and would appreciate some help. Thank you

Hi Key,
I have found a business objects Note 1198801.
Please have a look to it.
We can find Business objects Note/KBase from here
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true#]
For your reference have a look to content of that Note:-
1198801 - Error: "Crystal Reports: Application Error - Couldn't load the keydecoder.dll" when attempting to start Crystal Reports XI
Symptom
When attempting to start Crystal Reports XI, the following error message appears:
"Crystal Reports: Application Error - Couldn't load the keydecoder.dll".
Cause :
The error message occurs because the CommonFiles entry has the wrong path in the registry.
Resolution :
CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
To resolve the error message
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open: text field. Click OK. The Registry Editor appears.
Navigate to the following key: HKEY_LOCLAL_MACHINESOFTWAREBusiness ObjectsSuite 11.5Crystal Reports.
Double-click the CommonFiles string. The Edit String dialog box appears.
Ensure that the path points to the location of <installation directory>Common3.5 in.
For example, the default location is the following: C:Program FilesBusiness ObjectsCommon3.5 in.
Edit the path as necessary.
Click OK. Close the Registry Editor.
Crystal Reports starts successfully.
Hope that helps!!
Regards,
Shweta

Crystal Reports 2008 Runtime creates Logon Fialed error

i have a client running Crystal REport 2008 SP4. They are now receiving this error when running reports.
Logon failed.
Details: [Database Vendor Code: 18456 ]
Logon failed.
Details: [Database Vendor Code: 18456 ]
Error in File Sick Leave Taken from Anniversary Date {0F164D11-4856-4C12-9EA7-2CE3C3F0861E}.rpt:
Unable to connect: incorrect log on parameters.
Details: [Database Vendor Code: 18456 ]
The report runs fine on my development environment. What could be causing the error?

See if the blog [Understanding "login failed" (Error 18456) error messages in SQL Server 2005|http://blogs.msdn.com/b/sql_protocols/archive/2006/02/21/536201.aspx] will help (big assumption on my part re. the db you are using...)
See the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Crystal Reports 2008, Characteristic-Structure and LiveOffice Error

Hi,
I am trying to integrate a table from a Crystal Report (2008) in a powerpoint document using LiveOffice. The table uses a characteristic structure set up in the Bex Query. I.e. I created a structure for different nodes in a hierarchy to show the result on a row per node.
As soon as I am using groups in the table based on the structure, there's an error upon refresh of the liveoffice object. It says something like "successful (with warning)" and then "Missing parts: GroupNameStruc" (using the geramn version so I have to guess the translation). As a result, the table or liveoffice object now is empty.
When I use a group on a normal Characteristic which is not part of the structure (e.g. I have the year in free characteristics) there is no problem in liveoffice.
I read somewhere, one should use self defined technical names on the structure and it's elements, so I tried that too but with no success.
I don't see any other way than using a structure in the query, because I need to filter the nodes I need based on the underlying hierarchies. Since there's more than one hierarchy involved, I suppose I cannot even use the characteristic outside of a structure and then filter the hierarchies in Crystal...
Crystal Reports 2008: 12.4.0.966
Integration Kit: 12.4.0.966
LiveOffice: 14.0.2.364
Any help is appreciated!
Thanks,
Philippe

Hi,
Please try to apply fix pack on BOE and then try to apply it on Crystal Reports.
Install teh corresponding fix pack to BOE first befor applying it to Crystal.
Thanks
Aniket Nagdeo

Crystal Reports 2008 FP 3.6 Installation Error

Hello. Not sure if this is the right place in the forum, but could not figure out a better one. Anyway, I am having major issues installing FixPack 3.6 on Crystal Reports 2008 (updated through SP 3). I keep getting error during installation for "Version is Too Low". Then install shuts down.
Any thoughts? I tried re-installing SP 3, and verified my version is correct to match SP3. It is 12.3.0.601.
If it helps, my IT group instructed the FP 3.6 installation order as follows. My prior CR set up was SP2 with FP 2.4.
1. Business Objects XI 3.1 SP3 - Done
2. Crystal Reports SP3 - Done
3. Business Objects Integration Kit SP3 - Done
4. Business Objects XI FP 3.6 - Done
5. Crystal Reports FP 3.6 - Error
6. Business Objects Integration Kit FP 3.6 - Not Done.
Any thoughts or assitance would be greatly appreciated.
Thanks,
Barret

Hi,
Please try to apply fix pack on BOE and then try to apply it on Crystal Reports.
Install teh corresponding fix pack to BOE first befor applying it to Crystal.
Thanks
Aniket Nagdeo

Crystal Reports 2008 viewer, print function, Comunication error

I installed cr2008 on a web server and isntalled sp0
if I bring up a reprot in smartviewer from a client it works and I can print
once I installed sp1, sp2 and or sp3 for crystal reports 2008 the print button in crystal reports viewer gives an error when I click the print button.
If I remove and re-isntall cr2008 and just installed sp0 the print button works again
Is there a fix to make the print button work in crystal reports smart viewer once sp1 or above have been installed
thank you
ted

Translating the error message on bablefish I get:
Mistake with the store of the data bank information. Mistake in the file Report {C6512421-348A-4621-B1ED-895D28646A0A} .rpt
Which I'm sure is not 100% accurate, but it gives a good hint. As well, because of this:
"Do I need to install an additional / diffrent runtime than 2008 Runtime"
I wonder how you installed the CR 12 runtime on that computer? For more info on CR runtimes, see [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] wiki.
If my suggestion above does not help, make sure the Win\temp directory can be accessed buy the application. Crystal Reports runtime needs to write and read files from the temp directory.
Ludek

Crystal Reports 2008 Barcode font not exported to any format

Hi,
I am creating a report that will use IDAutomationC128XXL barcode font (GS1 standard). I have downloaded and installed this font in my machine. I use the Visual Basic UFLs (IDAutomationFontEncoderUCC128()) to convert my content to barcode. I also have changed the field's font to IDAutomationC128XXL (by right click and field formatting). After this, i am able to see the barcode created in the my report preview. However when i try to export my report to PDF or any other format, the barcode is not coming up. It comes empty when i export to PDF.
Am i missing any step to print barcodes in PDF during export from crystal report?

Hi Sankara,
Licensed fonts are Not exported to PDF.
You should get in touch with IDAutomation's support and ask what are the alternatives.
-Abhilash

Crystal Reports 2008 Formula in Cross-Tab Error Not Supported

I have a crosstab that was created in Crystal XI and when I opened the report in Crystal 2008 I receive an Error "Not Supported" when I removed the fromula that was in the Crosstab the report displayed. The following is the formula that is within the crosstab:
If {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME} = '(No Cohort)' THEN
    If DistinctCount({VWR_PPS_VISIT_SCHEDULE.COHORT_NAME},{VWR_PPS_VISIT_SCHEDULE.PROPOSAL_VERSION_ID}) >1 then
         {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
    else
        ""&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
else
    {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
As I mentioned the formula works perfectly in Crystal XI but not Crystal 2008 which no sese at all. We are preparing to migrate from Crystal XI to Crystal 2008 and if this is an issue we may need to but upgrading off.
Any help with this would be gratly appreciated.
Thanks
Edited by: jackie2009 on Oct 9, 2009 3:41 PM

Try adding brackets around the If statements.e.g.
If {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME} = '(No Cohort)' THEN
If DistinctCount({VWR_PPS_VISIT_SCHEDULE.COHORT_NAME},{VWR_PPS_VISIT_SCHEDULE.PROPOSAL_VERSION_ID}) >1
then {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
else ""&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
else {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}

Error while opening Crystal report 2008

Hi All,
I get the following error when I try to open crystal report 2008 trial version:
"Entry Point Not Found The procedure entry point ?CanStackDump@SLogger@CXLib400@@SA_NXZ could not be located in the dynamic link library cxlibw-4-0.dll."
To over come this I tried to install crystal report 2008 SP1 but it didn't help,
even I uninstalled all Crystal report setup and tried to install Crystal report 2008 server even that didn't helped.
Kindly suggest some solution.
Thanks
Deep Kulshrestha

Hi Deep,
Try these links:
http://boardreader.com/thread/ERROR_SvcMgr_exe_Entry_Point_Not_Found_5cb3X2r3z.html
http://www.tek-tips.com/viewthread.cfm?qid=1505754&page=11
I hope they will help.
Jesper

File not found error when Downloading Crystal Reports 2008

Hi,
I am trying to download a trial version of Crystal Reports 2008. I get the error "file not found" both times when I downloaded the zip file and opened it first from the Free trial link and next from the Diamond community page link. Can anyone help pls. ? Thanks AC

New location to download: http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

[Crystal Reports 2008] - Logon failed in SAP system

Hi everybody,
I have installed on my notebook Crystal Reports 2008 trial version and the Integration Kit for SAP Solutions that I found on this web page: https://boc.sdn.sap.com/node/18962
When I try to open a SAP Data Source, Crystal Reports finds the connections I have in my SAPLogon and ask me credential infos. I get the following credential error:
"You do not have the necessary rights to design reports against the SAP System"
The user I enter has full administration right on the system, which is a SAP R/3 Enterprise.
Thanks,
Valerio

Hello Valerio,
Please make sure you install the corresponding transports for the Driver you are trying to use in Crystal Reports.
The transports are available on the SAP Integration Solution CD.
thanks
Mike

Deploy Crystal Reports 2008, VS2008, Windows Server 2008

Hi All,
I'm looking for guidance on how to deploy a web application developed on VS2008 - I've installed Crystal Reports 2008 (trial version). So in affect crystal reports is integrated in the web app.
So now I want to deploy to our web server to complete the POC.
I've no idea what I need to do to deploy. I installed my trial version of CR2008 on our server and moved the web app onto it as well. Web App running fine under IIS7. I've added the folowing to my web.config
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Is this the correct way to deploy?
I am getting the following error .... any help much appreciated
Regards,
Sinead
Server Error in '/' Application.
Invalid file name.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Invalid file name.
Source Error:
Line 30:             }
Line 31:
Line 32:             repDoc.Load(Server.MapPath("") + "
DailyNumbers.rpt");
Line 33:             CrystalReportViewer1.ReportSource = repDoc;
Line 34:             ParameterFieldDefinitions crParameterFieldDefinitions;
Source File: c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs    Line: 32
Stack Trace:
[COMException (0x800001fb): Invalid file name.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +419
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +894
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +84
   WFDailyNumbers.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\EMS\WFDailyNumbers.aspx.cs:32
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627

I downloaded Crystal Reports 2008 - Service Pack 3 Full Build - that wouldn't install
Downloaded Crystal Reports 2008 - Service Pack 3 - which installed successfully.
I now have ....
Crystal Reports 2008 Runtime SP2
Crystal Reports 2008 SP2
Crystal Reports 2008 SP3 Update
I found another thread similar to the error I am getting which recommended adding Everyone to the Permissions on the C:\Windows\Temp folder. With this set, when I try to navigate to the report on the web app I don't get the error as before - but the application just sits there and spins it wheels and nothing happens. When I take off this permission I am back to the previous error.
Theres nothing revealing in the eventlogs that I can see.
Do you think this could be down to IIS just not knowing what to do with a .rpt file?
In the web.config
<httpHandlers>
<add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</httpHandlers>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode"/>
</handlers>
Regards,
Sinead

Crystal reports 2008 SP1 missing in BusinessObjects Crystal Reports website

We have used Crystal reports 2008 as a reporting utility in our application and have released our product last year. During our release the latest software available was Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7 and same was mentioned in our documentation as mentioned in BELOW.
The current supported version of Crystal Reports is Crystal Reports 2008 with
Service Pack 2 and Fixpack 2.7. The installation sequence is as follows:
1. Install Crystal Reports 2008 base.
2. Install Crystal Reports 2008 SP1.
3. Install Crystal Reports 2008 SP2.
4. Install Fixpack 2.7. This can be found under the hotfix section on the web site.
Questions
1) Now the issue is that, Crystal reports 2008 SP1 is NOT available for download in the "Business Objects u2013 Crystal Reports Runtime Packages". Why was it removed? Any clue? Without this our instructions doesn't hold good.
2) If Crystal reports 2008 SP1 will NOT be available any more then what is the equivalent installable for "Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7" to be used? Can Crystalreports 2008 SP3 Full Build + Fix Pack 3.3 be used instead of "Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7" ?
Pls Clarify.

Hello,
Download Service Pack 3.0 full build: https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
and then Fix Pack 3.3: https://smpdl.sap-ag.de/~sapidp/012002523100016815822010E/cr2008fp33.exe
Then you and your users don't need to go through all of those upgrade steps.
Thank you
Don

Invalid export DLL or export format" with Crystal Reports 2008 to Excel xls

We are experiencing the same issue as reported in the sticky thread. I answered in that thread, but thought that I woudl open a new thread to keep track of this issue. I can give you the responses to your questions you have requested in that thread:
Server Operating System - MS Windows Server 2003 R2 Enterprise Edition SP2
Version of the .NET Framework - MS .NET Framework 3.5 SP1
How did you deploy? - Installed CR 2008 SP1 runtime with msi package
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size? CRRuntime_12_1_mlb.msi dated Sept. 16, 2008 12:55:00 PM, size: 56,717,824 bytes
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory - File was created 9/13/08 11:21AM, 9451KB File Version: 12.1.0.882
How many libpng10.dll files are on your system? List all instances. - 1 instance is on the system located in C;\Program Files\Business Objects\Business Objects Enterprise 12.0\win32_x86 directory. It is dated 9/13/08 8:52:26AM 132KB version 1.0.30.1
Any additional comments - We have tried to export to PDF and this works successfully. However, we can not export to xls or rft formats.
CRXF_XLS.dll is 905KB 9/13/08 9:38AM Version 12.1.0.882
CRXF_RTF.dll is 509KB 9/13/08 9:35AM Version 12.1.0.882
We also have the CR XIR2 server runtime installed side by side on the server as we migrate from CR 2008 to CR XIR2 SP4 ( where this function does work currently).
Please let me know if you need anything additional.
Phil
"Invalid export DLL or export format" with Crystal Reports 2008
Posted: Sep 27, 2008 12:36 AM       E-mail this message      Reply
I've included this sticky because we are seeing many posts in this forum regarding the error Invalid export DLL or export format when exporting to Excel and RTF in .NET applications using the Crystal Reports 2008 .NET SDK.
Issue
Exporting a Crystal Report to Excel or RTF format
.NET application using the Crystal Reports 2008 runtime (version 12.0)
error Invalid export DLL or export format
We've been doing some testing in-house and haven't reproduced this behavior. In order to figure this issue out we will need your help. If you are getting this error please reply to this post with the following information:
Server Operating System
Version of the .NET Framework
How did you deploy?
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size?
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory
How many libpng10.dll files are on your system? List all instances.
Any additional comments
What We Know
The error invalid export DLL or export format may occur when exporting to Excel and RTF formats in .NET applications utilizing the Crystal Reports 2008 runtime (v 12.0)
Other export formats like Adobe PDF, Crystal Reports, CSV all export with no error
Some customers have resolved this by adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to their environment path variables
This may have something to do with the file libpng10.dll. Both crxf_xls.dll and crxf_rtf.dll are dependent on it.
Thanks in advance for your co-operation. We hope to figure out what is causing this issue soon.

Hi,
I am also having the same problem, except that I am not using Crystal Report 2008 runtime but the actual Crystal Report 2008 installation on Windows XP SP2 with VS Studio 2005 (VC++). MS .NET Framework 2.0.
Cyrstal Report XIR2 was installed on the same machine but uninstalled before installing Crystal Report 2008.
So only one instance of libpng10.dll and found in C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
Crpe32.dll        3/1/2008 version 12.0.0.683
Crxf_xls.dll       3/1/2008 version 12.0.0.683
Crxf_rtf.dll         3/1/2008 version 12.0.0.683
crdb_oracle.dll 3/1/2008 version 12.0.0.683
libpng10.dll       3/1/2008 version 1.0.30.0             122880 bytes
There is no problem for exporting to pdf, html, word, csv, Crystal Report. If I create a testing report without any data from database, the testing report can then be exported also to rtf and xls.
Oracle 11.1.0.6 is the DB for the reports.
Adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to the path did not resolve my problem.
Any idea to fix this issue?
Thanks
Kin H Chan

Crystal Reports 2008 Trial crashes; crw32.exe error; any fix?

Similar Messages

Maybe you are looking for