Crystal Reports 2011/ SBO 9 - Printing Layout on the Stickers Printer

Hi,
I Created  The CR Layout for print Stickers.
I have Zebra Printer
The Layout's size are optimized to Sticker page size.
When I Click Print Preview  on the Crystal Reports for SBO 2011 Application - I'm Able to print Successful Sticker.
When I Try Print The Layout from Sap Crystal Viewer   (Print CR from SBO) - The Sticker gets out empty.
I have did it on 2 different Printers and have Received same Results.
Do you Have some solution?!
thanks,
Michael

Hi,
Please make sure printer settings and page setup in SBO are same.
Thanks & Regards,
Nagarajan

Similar Messages

  • Where are release notes for Crystal Reports 2011 SP10?

    We've recently moved from Windows XP with an older release of Crystal to Windows 7 (64 bit) with Crystal Reports 2011.  Where can you find what issues have been fixed?  Despite finding a link with the text "Support and Feature Pack Release Notes" on the web page SAP Crystal Reports 2011 – SAP Help Portal Page, the document is for SP5.  Where can you find issues known and fixed in each of the service packs (and known and not fixed)?  I also looked at Analytics Knowledge Center and picked Crystal Reports and 2011 and the only release notes other than the initial release is for a FP3, which as near as I can tell is nowhere to be downloaded so I assume the SP1 replaced that...

    Hi Eddie,
    Release notes for SP10 are only available on the Service Market Place.
    If you have an S-user ID, you may have a look at the document here.
    -Abhilash

  • SAP Crystal Reports 2011: Error INS00140 The Product keycode is not valid

    I have followed all of the instructions in the previous thread but am still getting the error message.  I am trying to install on a Windows 7 machine.

    Try this Post...
    SAP Crystal Reports 2011: Error INS00140 and other install errors
    PS - Coy no longer works here
    Don

  • Hiding the Selected field in the Crystal reports 2011

    Hi Experts,
              I am new to the Crystal reports. How to hide the Selected Field in the Crystal report 2011.
    Thanks,
    Kavya.C

    Hi Kavya,
    You can right click on the field, go to Format Field -> Common Tab. Select/Check the option "Suppress". Or if you want to hide/ Suppress the entire section in a Crystal Report, for e.g. Detail section, right click on Details Section and select Section expert. You can select Hide/Supress accordinly.
    That should hide the filed/Section when you run the report.
    - Kuldeep

  • Crystal reports 2011 failure to pull the master data for AP Items

    I am using businessobjects 4.0 and i am also running crystal report 2011.I am connecting to a sap erp ecc 6.0 ehp4 without any issue.The challenge comes when trying to input or pick the master data for example company code .The crystal report does not populate the company code field with master data.Any suggestions?

    Hi Venkateswaran,
    FIrst of all thanks for offering help...
    uploding screen shots, below mentioned screens are captured when I was creating a new report on CR2011, usning SAP standard table "T001", there is no parameters, it is simple report but I didnot get data, if i browse the field through Cystal report is says Data Size is 0.
    I also would like to inform you that If i use crystal report 2008 SP3 for same ERP, Same table and same fields, then i get proper data/report.

  • I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate  if you have any suggestions for thi

    Hi,
            I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate  if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly .  I would like to prepare or get trained well before taking the exam as I see it costs around $500.
    Thanks in advance for your help in this regard!
    Sincerely,
    J

    Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
    Please use some summarized title for your query.

  • Hiding a data field in SAP Crystal Reports 2011

    Hello,
    I am new to SAP Crystal Reports 2011 (Crystal Reports).
    Does any one know how to hide a Special Field in a Crystal Report?
    Specifically, I am trying to hide the Special Field, 'Record Number'  from displaying on my report.
    I need the Special Field, 'Record Number' to know how many records was printed on my report
    in order to limit the amount of records printed while I am testing this new report.
    Thanks for the help!
    Tony

    Hi Tony,
    Yes to hide specific field, follow abhilash suggestion..
    1. Limit the number of records displayed on your report like that:
    section expert -> particular your report section -> click on suppress -> write below formula
    RecordNumber > Limited number of records count..
    2. limit the number of records  per page on your report follow below link:
    How to limit the no of records per page in crystal reports 2008
    Thanks,
    DJ

  • How to run a crystal report in SAP Crystal Reports 2011

    I've installed SAP Crystal Reports 2011. I can't figure out how to run a crystal. What replaces the lightning bolt used in previous versions of crystal? I'm I missing something?

    Hi Tim,
    You may:
    1) Press F5
    2) Go to Report > Refresh Report (Notice the icon beside the label)
    3) Go to View > Print Preview
    4) Or, click the refresh button on the toolbar
    5) The icon on Point#2 is also available on the toolbar
    -Abhilash

  • Crystal report 2011 - Suppress formula?

    I'm not new to Crystal reports 2011, but I am new to this forum. Excuse me if my question is already answered in another discussion thread, but I've searched the forum, but could not find an answer easily.
    In my report I need to total the amount per day per security. If one of the totals per day have a negative amount, my report should show all dates for that security.
    To make it more clear to you I've put in two examples
    Example 1:
    From date      PfGrp        Por         Security      ISIN          Custody     Amount
    15-1-2015      aaa           por_a      Sec01        123456      Cust01      5000
    15-1-2015      aaa           por_b      Sec01        123456      Cust02      -6000
    16-1-2015      aaa           por_a      Sec01        123456      Cust01       5000
    16-1-2015      aaa           por_b      Sec01        123456      Cust02       1000
    17-1-2015      aaa           por_a      Sec01        123456      Cust01       2000
    17-1-2015      aaa           por_b      Sec01        123456      Cust02       1000
    Expected output:
    From date      PfGrp        Por         Security      ISIN          Custody     Amount
    15-1-2015      aaa                          Sec01        123456                         -1000
    16-1-2015      aaa                          Sec01        123456                          6000
    17-1-2015      aaa                          Sec01        123456                          3000
    Output expected because the total amount on 15-1-2015 is negative. Because of this negative total amount the other dates have to be shown as well.(although they are positive)
    Example 2:
    From date      PfGrp        Por         Security      ISIN          Custody     Amount
    15-1-2015      aaa           por_a      Sec01        123456      Cust01       5000
    15-1-2015      aaa           por_b      Sec01        123456      Cust02       6000
    16-1-2015      aaa           por_a      Sec01        123456      Cust01       5000
    16-1-2015      aaa           por_b      Sec01        123456      Cust02       1000
    17-1-2015      aaa           por_a      Sec01        123456      Cust01       2000
    17-1-2015      aaa           por_b      Sec01        123456      Cust02      -1000
    No output expected because all the totals per day are positive.
    Regards, Peter.

    Hi Peter,
    Try this please:
    1) Save the existing report with a new name. You should now have two copies of the same report - let's call them A and B.
    2) Open Report A.
    3) Insert a Group on the Security Field first and then on the Date field. Set the Date Field to 'Print for Each Day'.
    4) Create a formula (@Groups) with this code and place this on Group Header #2:
    WhilePrintingRecords;
    stringvar groups;
    If Sum ({Amount}, {Date}) < 0 then
        If Instr(groups,{Security}) = 0 then   
            groups := groups + {Security} + ",";   
    groups;
    5) Suppress all sections of this report except the Report Footer.
    6) Go ahead and Insert a Subreport. In the Insert Subreport dialog box, browse to the Report B and place it on the Report Footer.
    7) Edit the Subreport so that it has the same groups as the Main Report (or Report A)
    8) Right-click the Subreport > Change Subreport Links > Move the @Groups formula to the Pane on the right > Uncheck the option 'Select data in Subreport based on Field' > Click OK.
    9) Get inside the Subreport > Click the Report Option > Selection Formulas > Record and use this code:
    Not({Security} IN Split({?Pm-@Groups},","))
    IF you have some existing selection formula in there, then you would need to add this condition with an AND clause.
    Hope this helps.
    The reason we have to add a Subreport is because you're trying to suppress a higher group based on a summary that appears on a lower group.
    If you're reporting off of tables, you should be able to use a SQL Expression Field to display the summary for Group #2 and use this summary to suppress the higher section based on another logic!
    -Abhilash

  • Crystal reports 2011 - Application error crw32.exe

    Hi,
    I hope that I'm posting in the right section.
    We use Crystal reports 2011 on one of our servers but are experiencing a number of application errors to do with the software.  Unfortunately I haven't been able to find out if there are any specific activities on the server which are generating them.
    The errors are as follows:
    Faulting application name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
    Faulting module name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
    Exception code: 0xc0000005
    Fault offset: 0x007010ef
    Faulting process id: 0x3f8
    Faulting application start time: 0x01cf6ea5517923e6
    Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
    Faulting module path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
    Report Id: 954a54f3-da9a-11e3-acdb-3cd92b08a874
    Faulting application name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
    Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58
    Exception code: 0xc0150010
    Fault offset: 0x0008477b
    Faulting process id: 0x3f8
    Faulting application start time: 0x01cf6ea5517923e6
    Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 962a1691-da9a-11e3-acdb-3cd92b08a874
    Faulting application name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
    Faulting module name: msxml6.dll, version: 6.30.7601.17514, time stamp: 0x4ce7b8eb
    Exception code: 0xc0000005
    Fault offset: 0x00001fa8
    Faulting process id: 0x1c98
    Faulting application start time: 0x01cf6ea75a5019f4
    Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
    Faulting module path: C:\Windows\System32\msxml6.dll
    Report Id: b100ae23-da9b-11e3-acdb-3cd92b08a874
    If you require any additional information from me please let me know.
    Thanks for reading.
    Regards,
    Don

    Hi Brian,
    Thanks for your help and advise.
    Crystal has been running on the server for some time (over a year) but hasn't been 'managed' until now so am looking at all of the issues at present.
    We haven't seen a pattern when the errors started though.
    Unfortunately the only errors I think relating to CR are the ones in the original post.  There are other errors, particularly to do with printing, but I think that they these are due to the TS sessions which wouldn't run Crystal. See below.
    The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\tsprint.dll, error code 0xc1. See the event user data for context information.
    I am assuming the users are fine when they view the report then; scrolling through pages.  Yes, I believe so.
    Yes, there are no locally attached printers on the server so the users rely on their remote session sharing the printer.
    Regards,
    Don

  • Add Query Print Layout at the User Menu

    Hi,
    I want to add a specific Query Print Layout in the user Menu.
    Is there any option?
    Thanks in advance

    Hi......
    I Dont think its possible in QPLD to give authorization for a Particular Query Print Layout.
    I'm not sure whether its possible in case of Crystal Report or not.....
    Regards,
    Rahul

  • Error while running Java application using Crystal Reports 2011

    Hello,
    I would like to ask for your help.
    Environment details:
    Java based standalone application in Development environment.
    Crystal Reports 2011 (no SP applied)
    Oracle 11g ( 32 bit client installed)
    Win7 64 bit OS.
    Workflow:
    While running the java application, which will display the reports I am getting the below mentioned error. I guess that is because I am missing the Crystal runtimes (Correct me if I am wrong).
    I know that CR2011 do not have any sdks/ jar available for deployment. In this case, which runtimes should I be using? Does installing CR2011 be enough in the development box?
    Please provide me the link from which I can download the same.
    Let me know if I need to provide more details on this. Any suggestions are most welcome.
    Thank You.
    Code used:
    reportClientDoc = new ReportClientDocument();
    System.err.println("Opening the Report ");
    reportClientDoc.open(REPORT_PATH, 0);
    // this is where the error or exception is thrown
    _Error: _
    log4j:WARN No appenders could be found for logger (com.crystaldecisions.reports.reportdefinition.ReportDocument).
    log4j:WARN Please initialize the log4j system properly.
    com.crystaldecisions.sdkreport.lib.ReportSDKException: com/businessobjects/reports/jdbinterface/common/DBException---- Error code:-2147467259 Error code name:failed
                    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:286)
                    at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43)
                    at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
                    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.<init>(SourceFile:703)
                    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
                    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
                    at com.crystaldecisions.sdk.report.application.ClientDocument.if(SourceFile:504)
                    at com.crystaldecisions.sdk.report.application.ClientDocument.open(SourceFile:669)
                    at com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
                    at rp.batch.bo.RpJRCExportReport.runReportExport(RpJRCExportReport.java:517)
                    at rp.batch.bo.RpSchedReportRun.process(RpSchedReportRun.java:163)
                    at rp.batch.bo.RpSchedReportRun.drive(RpSchedReportRun.java:240)
                    at rp.batch.bo.RpSchedReportRun.main(RpSchedReportRun.java:265)
    Caused by: java.lang.NoClassDefFoundError: com/businessobjects/reports/jdbinterface/common/DBException
                    at com.crystaldecisions.reports.queryengine.Session.a2(SourceFile:244)
                    at com.crystaldecisions.reports.datafoundation.DataFoundation.do(SourceFile:376)
                    at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.do(SourceFile:111)
                    at com.crystaldecisions.reports.dataengine.datafoundation.CreateDataConnectionCommand.new(SourceFile:81)
                    at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
                    at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
                    at com.businessobjects.reports.reportconverter.v12.e.a(SourceFile:442)
                    at com.businessobjects.reports.reportconverter.v12.e.a(SourceFile:231)
                    at com.businessobjects.reports.reportconverter.v12.d.m(SourceFile:192)
                    at com.businessobjects.reports.reportconverter.v12.f.if(SourceFile:210)
                    at com.businessobjects.reports.reportconverter.v12.V12SaveLoader.a(SourceFile:242)
                    at com.businessobjects.reports.loader.ReportLoader.a(SourceFile:205)
                    at com.businessobjects.reports.sdk.JRCReportLoader.a(SourceFile:137)
                    at com.businessobjects.reports.sdk.JRCReportLoader.a(SourceFile:76)
                    at com.businessobjects.reports.sdk.requesthandler.ReportDocumentRequestHandler.a(SourceFile:136)
                    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:229)
                    ... 12 more
    Caused by: java.lang.ClassNotFoundException: com.businessobjects.reports.jdbinterface.common.DBException
                    at java.net.URLClassLoader1.run(URLClassLoader.java:200)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
                    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
                    at sun.misc.LauncherAppClassLoader.loadClass(Launcher.java:301)
                    at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
                    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
                    ... 28 more

    Help me ...
    Ambient:
    Crystal Reports Viewer 14.0.0.0
    java.vendor = Sun Microsystems Inc.
    java.version = 1.6.0_37
    os.name = Windows NT (unknown)
    os.version = 6.2
    os.arch = amd64
    Exception:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects.sdk.erom.jrc.ReportAgentFactory---- Error code:-2147215357 [CRSDK00000026] Error code name:internal
              at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(ReportSDKException.java:112)
              at com.crystaldecisions.proxy.remoteagent.RemoteAgent.createDefaultAgent(RemoteAgent.java:1000)
              at com.crystaldecisions.sdk.occa.report.application.ClientDocument.initRemoteAgent(ClientDocument.java:770)
              at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(ClientDocument.java:961)
              at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.open(ReportClientDocument.java:226)
              at src.HelloWorldSwing.createAndShowGUI(HelloWorldSwing.java:54)
              at src.HelloWorldSwing.main(HelloWorldSwing.java:24)
    Source:
    import java.awt.BorderLayout;
    import javax.swing.JFrame;
    import com.crystaldecisions.ReportViewer.ReportViewerBean;
    import com.crystaldecisions.sdk.occa.report.application.DatabaseController;
    import com.crystaldecisions.sdk.occa.report.application.OpenReportOptions;
    import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
    import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
    import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
    public class HelloWorldSwing {
               * @param args
              public static void main(String[] args) {
                        HelloWorldSwing pgm = new HelloWorldSwing();
                        try {
                                  pgm.createAndShowGUI();
                        } catch (Exception e) {
                                  e.printStackTrace();
                                  //JOptionPane.showMessageDialog(null, e.toString());
               * @throws Exception
              public void createAndShowGUI() throws Exception {
                        // Make sure we have nice window decorations.
                        JFrame.setDefaultLookAndFeelDecorated(false);
                        // Create and set up the window.
                        JFrame frame = new JFrame("HelloWorldSwing");
                        frame.setTitle("Titolo del Report");
                        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                        ReportViewerBean viewer = new ReportViewerBean();
                        viewer.init(new String[0], null, null, null);
                        ReportClientDocument rpt = new ReportClientDocument();
                        rpt.setReportAppServer(ReportClientDocument.inprocConnectionString); // inproc:jrc
                        rpt.open("Report.rpt", OpenReportOptions._openAsReadOnly);
                        IReportSource rptSource = rpt.getReportSource();
                        viewer.setReportSource(rptSource);
                        frame.getContentPane().add(viewer, BorderLayout.CENTER);
                        frame.setSize(1930, 1030);
                        frame.setVisible(true);
                        viewer.start();

  • Crystal Report 2011- SAP Data Sources: CL - no items found

    Background:
    SAP ECC 6.0 was purchased three years ago with DSD package. Only FI and SD modules are in use. Accounts download data filesfrom SAP to produce spreadsheet reports. Few user trust these numbers. We are setup as "SAP in the Cloud" model- Listening to constant user complaints, it seems SAP is broken. Interim solution: Crystal Report for everyone.
    Encouraged by Ingo Hilgefort papers and Crystal Report Forum:
    We decided to deploy Crystal Report 2011 and Business Object XI 3.1 with SP4 for our small user community. These software are installed on local XP laptop and Business Object XI 3.1 installed in the SAP server as well.
    Problem Description:
    The desktop user cannot see SAP infosets or tables contents. When connect to the data sources. After user login, she can navigate to expand the data source CL.- displays "no items found ". I can reproduce this error. Using the Crystal Report wizard and selecting various data sources such as: SAP Table, Cluster and Functions: CL, DD and FN category only DD and FN display items.
    Current Environment: SAP in the Cloud.
    SAP Server::ECC 6.0 EhP3 dual stack. Database MSSQL, OS 2008 Server, Business Object Intergration Kit 3.1, Remote Acces VPN.
    Desktop Environment: Crystal Report 2011: SP1, Business Object Xi 3.1, XP SP3
    Surprise: Clicking on either DD and FN tab inside the connector window in Crystal- it expands and displays tables and content reference but not CL.
    Questions: Do we have to move to EhP5 for the CRX 2011 to work ? What is wrong: ? Any help will be appreciated?
    This question is for Ingo H. How to convince SAP hosting company otherwise to solve our problem ? Is is desktop problem or Host side configuration ?

    Ahmad
    K900687 is Open SQL Connectivity transport and required for direct SAP tables connectivity, so you need it, but I am not sure if the warning message relevant to your problem. Sometimes warning is just a warning.
    You can see other objects in DD, but not in CL, it means the connection works. You probably do not have required authorisations to see objects.
    I would suggest to review the Authorisation section of SAP Integration Kit Installation Guide here:
    [http://service.sap.com/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf ]
    You may also check what is the differences between DD and CL in terma of authorizations.
    If you think CR 2011 is broken, then test CR 2008. Is still available for free 30-days trial download here:
    [http://www12.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx]
    , but you would need to add SAP Integration Kit to it.
    Vitaly

  • Crystal Reports 2011 not working in windows 2008 server CITRIX

    Hi All,
    We are using  Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
    We are using .net applicationton to run the reports.
    The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
    OK button is not responding. Cancel button too.
    Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
    Please feel free to ask if required any more details about my problem.
    Regards,
    Venkat.K

    Ido's idea is excellent, only addition I'd like to make is the following:
    You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
    If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Error  When Refreshing a Crystal Report 2011 from BI launchpad

    Hi,
    I am getting this error message [CRWWEB00000119] VIEWER COULDN'T PROCESSS AN EVENT when trying to view a crystal report from BI Launchpad. I have created the report using Crystal 2011 and Published it to SAP BO BI 4.0, Verified the Database Username/password for the report and it has the correct information. Report works without issues from Crystal 2011 Designer.
    When I schedule this report it fails alsowith "Error in File ~tmp1ccc6d9c2d14c50.rpt: Failed to load database information" message.Checked the Oracle ODBC on the server and it is pointing to the DWH, I have created the report using Crystal 2011using oracle server connection and Oracle 11gR2 32 bit client is installed on my machine, SAP BO BI 4.0 Server has Oracle 11gR2 64 bit middleware and has the Oracle ODBC for the conenction i am using in the report.
    Please let me know if anyone has faced similar issue with SAP BO BI 4.0 and can help me resolve this, below is my environment details.
    Environment:
    Windpows Server 2008
    SAP BO BI 4.0
    Crystal Reports 2011
    Oracle 11gR2
    Thanks
    Sachin

    Hi Sachin,
    Did you verified the database details for the report in the CMC?
    Can you try also to publish the report by using the tool Report Upload Wizard?
    Thanks
    Philippe

Maybe you are looking for