Crystal reports 8.5 and 11 compatibility
Hello
I have two programs one using Crystal 11 another using crystal 8.5 to generate reports. Are there any dll's that are compatible with both?
Thanks : )
Hello Javier,
There isn't going to be much, if any, DLL files that are compatable with both. When version 9 was made it was redesigned from the ground up to be Unicode compliant. When this was done all DLL files that worked with the old versions would not work with the new versions.
-Sean
Similar Messages
-
Crystal report 8.5 and 11 compatibility with Office 2007
Hi, we are currently running Crystal report 8.5 and 11.
We are projecting to migrate to version 2007 of Office.
Is Crystal report 8.5 and 11 has been tested with office 2007?
Regards,Hi Eric,
You can download [Platform supported guide|https://websmp207.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000712240&_SCENARIO=01100035870000000202&].
It will help you out in better understanding of compatible environments.
Regards,
Shweta -
Crystal Reports 2008 Excel Export Compatibility Patch - second attempt :)
Hello, I actually have a question related to the following thread, so I posted there and was recommended to start a new thread:
Crystal Reports 2008 Excel Export Compatibility Patch?
Question is related to the following doc, specifically, is this patch still available for CR 2008 or not?:
http://help.sap.com/businessobject/product_guides/cr2008V1/en/xi3_cr2008eecp_readme_en.pdf
A response from Don suggested this wasnt available for CR 2008 although this is confusing since the doc refers to CR 2008. My response was as follows and is essentially the question I still have (more so because we have another PeopleSoft/Oracle customer whos come across this doc and wants to know how to apply the fix for CR 2008). Thanks very much in advance!
Hi Don, I know this is an old thread, but Im also running into the same issue and am confused by your statement since the referenced PDF doc says this patch is available for CR 2008. Did you mean that the patch is no longer available or supported for CR 2008 for some reason? If so, any idea why?
Im a developer for Oracle/PeopleSoft and our PeopleSoft suite includes OEM Crystal. We recently upgraded to CR 2008 for our latest release and we are getting the same complaint from a few customers about not being able to output the XLS in Excel 8.0 compatiibility mode like before (In Crystal 9, we used the \Export\Excel\CompatVersion=80 registry key to enable this). So if this patch is available, it would be a huge benefit for us to be able to point our customers to it. If not, please still let me know eitherway.
Thanks very much!
AndrewHi Andrew,
So the story is the Rubik's patch has been available from CR 9 up until CR XI R1 as a simple download. In R2 and above to get it you have to log a case, work with a Report Rep to try to design your reports so they use the new export dll. To get you by until you have time to do so, and after filling out a query for the PM to get info on how to possibly improve the updated export dll to meet your needs, he will then send you the patch on the agreement that this is the LAST time you ask for it.
Support no longer has access to the patch so all requests must go through the Program Manager who keeps tract of who received it.
Bottom line is you need to update the reports to use the new export model.
That old legacy dll was bugging and impossible to maintain.
You can [purchase a support case here|http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=54722300].
This is not a bug and has been this way for 10 years now, time to update your export model and Excel Macro's....
Thank you for your understanding
Don -
If image file not exist in image path crystal report not open and give me exception error problem
Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as belowFirst: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP] -
Crystal Report 2008 SP3 and BO XI 3.1 conflict
Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls :"<
T______THi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts -
Performace Issue using Crystal Report For enterprise and BEx Queries
Hi all;
We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
|7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380| 56|ModalContext | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
java.lang.AssertionError
at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
Best Regards
AnisVenkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM -
Crystal Reports Server 2011 and BW 7 as a data source for uploaded reports.
Hello,
I am hoping someone can provide me with a clear answer for this.
Lets assume..
1. We are running crystal reports server 2011 and BW 7
2. We want to publish a report in the BI Launch pad so users can view it
3. Can we create a crystal report in the report designer with the data source as BW 7 then upload it to the reports server and have it run on-demand and Run over night?
Can anyone shed some light in this area?
kind regards
davidHi,
Crystal Reports Server is not supporting the SAP Integration Kit. You will need BusinessObjects Edge or BusinessObjects Enterprise
regards
Ingo Hilgefort -
Crystal Reports 8.5 and Oracle 9.2.0.5
I would like to find out if Crystal Reports version 8.5 compatable with Oracle 9.2.0.5? Where this information can be found?
Thanks in advance for your help.
Sophiahttp://www.businessobjects.com/jump/xi/
this official website might help you.
crytal report will support most database including oracle by using ODBC or OLEDB connection. -
Crystal Report 8.5 and 9 installed on the same box
Is it possible to have Crystal Report 8 and 9 installed on the same server?
Hi Michael,
You can install Crystal Report 8.5 and 9 on same box.
However, there are chances that dll may conflict and few issues may occur.
Try to install on different harddrives.
Regards,
Shweta -
Difference between Crystal Reports Server 2008 and Business Objects XI R2
Can anyone please help me know the difference between Crystal Reports Server 2008 and Business Objects XI R2? Both the support guides says that it supports Office 2007. I have a problem in exporting the reports to Excel 2007 .I have downloaded the trial version of Crystal Reports Server 2008 but still unable to view my complete reports in Excel 2007 through infoview because few of my report's colums are truncated and it still exports in Excel 2003.I have LiveOfficeXIR2_SP4 and Office 2007 installed. Is it so that i have to switch over to Business Objects XI R2 or any other to solve my problem instead of using Crystal Reports Server 2008 or is it the problem with the version of my Live office.Pls help me regarding this..
Babita.Babita,
request you to post the same in the BO forums for more relevant answers...
Arun -
Connecting Crystal reports with dashboards and passing parameters
Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu -
Crystal Reports XI R2 and Delphi 7.x
Post Author: Laurent
CA Forum: Other
Hi,
i'm using Delphi 7.x and Crystal Reports XI R2 and VCL for CR XI.The Database is an Oracle 9.x or 10.x acording to our software internal version.
When i run the application i got an error 100: error loading crpe32.dll.
I look in the KB and found it is connected to a path issue or missing MFC42.dll.
I check for the last file, it exist on my machine, i edit the path, setting the CR bin folder first in the list, not helping.
Any other idea, please?
BR
LaurentPost Author: Luca Pucci
CA Forum: Other
Hi Laurent,
I've tried the solution you suggest but it seems fix the problem only partially, i still get the 'can't load library' error form time to time, expecially after I've priented many reports from my application (that's strange but that is !).
Browsing through TCrpe source files I've found that the funcion GetCommonFilesPath in the file UcrpeUtl.pas use a registry key that is not valid if you're using CR11rel2 :
regKey.OpenKey('SOFTWARE\Business Objects\Suite 11.0\Crystal Reports', False);
if you change this line in :
regKey.OpenKey('SOFTWARE\Business Objects\Suite 11.5\Crystal Reports', False);
recompile and reinstall the package and everything seems to work fine.
You don't need to have the crpe32.dll in the same folder as your executable anymore, because now your application can retrive the correct common file directory and load the dll from its standard location.
There are some other registry key that point to version 11.0, they don't seems to be important and I decided not to change them, but eventually you can decide to change them all.
Best Regards
Luca. -
End of support lifecycle for Crystal reports 9.0 and 10.5
Hi,
I am trying to find end of support date for Crystal Reports 9.0 and 10.5. Is there a link where I could find this information?
What are the option available to upgrade? Costs, etc...
ThanksHi,
Support for Crystal Reports ver 9 and 10.5 has already ended and as such no longer available in our Service Market Place (SMP - https://service.sap.com/support) Product Availability Matrix.
The latest version is Crystal Report 2008 V1 which has a Maintenance End date of Dec 31, 2015.
For options to upgrade and costs, please call your nearest Customer Interaction Center (CIC) and they should be able to guide you to appropriate team.
CIC's number can be found in SMP > Help & Support tab > Look up Support Center Addresses sub tab.
Hope this helps. -
Crystal Reports, Classical ASP and Internet Explorer 8.0 compatibility
Hi
We have 8 legacy applications which are developed on classical asp having reports built on crystal reports 8.0. Our internet explorer version is 6.0. We are planning to upgrade to IE 8.0 in the next month. While testing these legacy applications for compatibility with IE 8.0, we found that the crystal reports are not visible/not functioning.
Do you know which version of crystal reports will be compatible with IE 8.0 as well as classical asp. Our OS is windows 2003 32 bit.
regardsHello,
You didn't indicate whether you're using the RDC / COM SDK for Crystal Reports, or the COM SDK for Crystal Enterprise in your classic ASP applications.
In either case, the COM SDKs have been retired with our current product releases. The last products to support the COM SDK are Crystal Reports XI Release 2 (v11.5) and BusinessObjects Enterprise Release 2 (v11.5). Both of these products have reached End of Life for patch support.
The [Supported Platform document for Crystal Reports XI R2 with Service Pack 6|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0fbebaf-07e0-2c10-ad9a-d45810ae7109] (v11.5) says that IE8 in compatibility mode is supported, so the RDC should work in IE8 Compatibility mode.
The [Support Platform document for BusinessObjects XI R2 with Service Pack 6|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a] (v11.5) says that IE7 is supported. There is no mention of IE8, but it's possible that IE8 in compatibility mode may work with the Enterprise COM SDK.
You may still be able to purchase these products. You'll have to check with your retailers, or with the SAP BusinessObjects Sales team - search on SAP.com.
It is important to understand that patch support has ended for both CR XI R2 and BOE XI R2. There will be no additional fixes released for these products, and if your applications do not work with IE 8 there is no escalation path for a fix.
Sincerely,
Dan Kelleher -
Exporting a crystal report as PDF and Attaching to an email via code - Filename Issuses?
Post Author: alynch
CA Forum: .NET
I need to export a crystal report as a pdf and send it out via email. I have created a subroutine that works but the attached filename come up as "untitled.txt" so the receiving machine believes it is a text file. If I rename it on the recipients machine to a ".pdf" I can open it with acrobat and it looks OK. Does anyone know how to rename the file as a pdf prior to sending it out?
Thank You.
al
I have included a copy of the subroutine:
Dim repdoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
Dim diskOpts As New CrystalDecisions.Shared.DiskFileDestinationOptions()
Dim ExpOpts As CrystalDecisions.Shared.ExportOptions
Dim MailOpts As New CrystalDecisions.Shared.MicrosoftMailDestinationOptions()
repdoc = Me.CrystalReport11
repdoc.Load("C:\Documents and Settings\User\My Documents\Visual Studio 2005\Projects\WindowsApplication3\WindowsApplication3\CrystalReport1.rpt")
ExpOpts = repdoc.ExportOptions
With ExpOpts
.ExportDestinationType = CrystalDecisions.[Shared].ExportDestinationType.MicrosoftMail
.ExportFormatType = CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat
End With
With MailOpts
.MailMessage = "Message"
.MailToList = "enter email adress here"
.MailSubject = "Attached is a PDF file - .net Export test "
End With
ExpOpts.DestinationOptions = MailOpts
Try
repdoc.Export()
Catch err As Exception
MessageBox.Show(err.ToString())
End Try
End SubPost Author: Knight
CA Forum: .NET
I had this same problem today, here's what I used. Its built in 2 parts. Step one loops throught and exports PDF copies of a traking report. Step 2 builds an email list from a SQl query and sends it.STEP ONE:Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click 'Declare the some variables Dim row1 As DataRow Dim brokerID As String Dim brokername As String Dim brokerEmail As String Dim shipdate As String Dim crParameterFieldDefinitions As ParameterFieldDefinitions Dim crParameterFieldDefinition As ParameterFieldDefinition Dim crParameterValues As New ParameterValues() Dim crParameterDiscreteValue As New ParameterDiscreteValue() Dim crParameterFieldDefinitions1 As ParameterFieldDefinitions Dim crParameterFieldDefinition1 As ParameterFieldDefinition Dim crParameterValues1 As New ParameterValues() Dim crParameterDiscreteValue1 As New ParameterDiscreteValue() Dim CrReport As New CrystalReport1() ' Report Name Dim report As ReportDocument = "O:KNIFormats_ReportPrivateSMStageShipmentInfo" Dim CrExportOptions As ExportOptions Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions() Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions() Dim SHIPDATE123 As String SHIPDATE123 = _month & "/" & _day & "/" & year Dim db As String db = System.Configuration.ConfigurationSettings.AppSettings("Datalogin") Dim sqlCon As New SqlConnection sqlCon.ConnectionString = db Dim strsql1 As String strsql1 = "SELECT tblSOOrd_Hdr.BrokerCd, tblSO_Ord_Hdr.BrokerName, tblSM_Ship_Hdr.ShipDate " strsql1 &= "FROM tblSO_Ord_Hdr INNER JOIN tblSM_Ship_Hdr ON tblSO_Ord_Hdr.Locale = tblSM_Ship_Hdr.Locale AND tblSO_Ord_Hdr.OrdNo = tblSM_Ship_Hdr.OrdNo AND " strsql1 &= " tblSO_Ord_Hdr.RlsNo = tblSM_Ship_Hdr.RlsNo INNER JOIN tblSys_Cust_Broker ON tblSO_Ord_Hdr.BrokerCd = tblSys_Cust_Broker.BrokerCd " strsql1 &= "GROUP BY tblSO_Ord_Hdr.BrokerCd, tblSM_Ship_Hdr.ShipDate, tblSO_Ord_Hdr.BrokerName " strsql1 &= "HAVING (tblSM_Ship_Hdr.ShipDate = '" & SHIPDATE123 & "') " Dim da1 As New SqlDataAdapter(strsql1, sqlCon) Dim worktbl1 As DataTable worktbl1 = New DataTable("tblEmail") da1.Fill(worktbl1) da1.FillSchema(worktbl1, SchemaType.Source) If worktbl1.Rows.Count > 0 Then For Each row1 In worktbl1.Rows brokerID = CStr(row1("BrokerCd")).Trim brokername = CStr(row1("BrokerName")).Trim shipdate = CStr(row1("ShipDate")).Trim CrReport.Load() crParameterDiscreteValue.Value = shipdate crParameterFieldDefinitions = CrReport.DataDefinition.ParameterFields crParameterFieldDefinition = crParameterFieldDefinitions.Item("ShipDate") crParameterValues = crParameterFieldDefinition.CurrentValues crParameterValues.Clear() crParameterValues.Add(crParameterDiscreteValue) crParameterFieldDefinition.ApplyCurrentValues(crParameterValues) crParameterDiscreteValue1.Value = brokerID crParameterFieldDefinitions1 = CrReport.DataDefinition.ParameterFields crParameterFieldDefinition1 = crParameterFieldDefinitions1.Item("Broker") crParameterValues1 = crParameterFieldDefinition1.CurrentValues crParameterValues1.Clear() crParameterValues1.Add(crParameterDiscreteValue1) crParameterFieldDefinition1.ApplyCurrentValues(crParameterValues1) CrDiskFileDestinationOptions.DiskFileName = "c:Test_Folder20" & _year & "-" & _month & "-" & day & "" & brokername & ".pdf" CrFormatTypeOptions.FirstPageNumber = 1 ' Start Page in the Report CrFormatTypeOptions.LastPageNumber = 1000 ' End Page in the Report CrFormatTypeOptions.UsePageRange = True CrExportOptions = CrReport.ExportOptions With CrExportOptions .ExportDestinationType = ExportDestinationType.DiskFile .ExportFormatType = ExportFormatType.PortableDocFormat .DestinationOptions = CrDiskFileDestinationOptions .FormatOptions = CrFormatTypeOptions End With Try CrReport.Export() Catch err As Exception MessageBox.Show("DID NOT EXPORT") End Try Next MessageBox.Show("All PDF's exported succesfully") End If End SubSTEP 2: Private Sub Button3Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click Dim row2 As DataRow Dim SHIPDATE123 As String SHIPDATE123 = _month & "/" & _day & "/" & year Dim db1 As String db1 = System.Configuration.ConfigurationSettings.AppSettings("Datalogin") Dim sqlCon As New SqlConnection sqlCon.ConnectionString = db1 Dim strsql2 As String strsql2 = "SELECT tblSOOrd_Hdr.BrokerCd, tblSys_Cust_Broker.BrokerName, tblSM_Ship_Hdr.ShipDate, tblSys_Cust_Broker.ContactEmail " strsql2 &= "FROM tblSO_Ord_Hdr INNER JOIN tblSM_Ship_Hdr ON tblSO_Ord_Hdr.Locale = tblSM_Ship_Hdr.Locale AND tblSO_Ord_Hdr.OrdNo = tblSM_Ship_Hdr.OrdNo AND " strsql2 &= " tblSO_Ord_Hdr.RlsNo = tblSM_Ship_Hdr.RlsNo INNER JOIN tblSys_Cust_Broker ON tblSO_Ord_Hdr.BrokerCd = tblSys_Cust_Broker.BrokerCd " strsql2 &= "GROUP BY tblSO_Ord_Hdr.BrokerCd, tblSM_Ship_Hdr.ShipDate, tblSys_Cust_Broker.ContactEmail, tblSys_Cust_Broker.BrokerName, tblSys_Cust_Broker.Email_ASN " strsql2 &= "HAVING (tblSM_Ship_Hdr.ShipDate = '" & SHIPDATE123 & "') AND (tblSys_Cust_Broker.Email_ASN = 1) AND (tblSys_Cust_Broker.ContactEmail <> '') " Dim da1 As New SqlDataAdapter(strsql2, sqlCon) Dim worktbl2 As DataTable worktbl2 = New DataTable("tblEmail12") da1.Fill(worktbl2) da1.FillSchema(worktbl2, SchemaType.Source) Dim brokerID As String Dim brokername As String Dim brokerEmail As String Dim shipdate As String If worktbl2.Rows.Count > 0 Then For Each row2 In worktbl2.Rows brokerID = CStr(row2("BrokerCd")).Trim brokername = CStr(row2("BrokerName")).Trim brokerEmail = CStr(row2("ContactEmail")).Trim shipdate = CStr(row2("ShipDate")).Trim Dim mail As New MailMessage Dim att As String att = "c:Test_Folder20" & _year & "-" & _month & "-" & _day & "" & brokername & ".pdf" 'set the addresses mail.From = New MailAddress("[email protected]") mail.To.Add(brokerEmail) mail.Attachments.Add(New Attachment(att)) 'set the content mail.Subject = "Shipment Tracking report from Knox Nursery for " & SHIPDATE123 mail.IsBodyHtml = True mail.Body = "
" mail.Body &= "This shipment update has been requested by:
" 'send the message Dim smtp As New SmtpClient smtp.Send(mail) ' MessageBox.Show("No Records Found", "Failed to send", MessageBoxButtons.OK, MessageBoxIcon.Stop Next Else MessageBox.Show("No broker have opted in", "No Emails Sent", MessageBoxButtons.OK, MessageBoxIcon.Information) End If MessageBox.Show("Emails sent... ", "Emails Sent", MessageBoxButtons.OK, MessageBoxIcon.Information) End Sub -
Problem with Crystal reports for Eclipse and Postgres-databases
Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
ArnoldYour issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda
Maybe you are looking for
-
My iPhone is associated with my husband's apple ID. How do I link it to my newly created apple ID? Will this screw up my husband's ID or account?
-
Multiple typefaces in the same paragraph style
I use APA formatting pretty often, and headings at the third level begin indented with bold for the title, followed by a period, and then the text for that paragraph, not bold. Example: Going to the movies. Going to the movies can be a fun... Is
-
Reformatte​d Clean install. NEED HELP
Hi everyone my old HDD Crashed and i bought a new one, I Did a fresh install of windows 7 and now my FN + F Keys wont work, For example when i press FN + F5 i dont get anything before i used to get a screen to turn on bluetooth and stuff. Im frustrat
-
The application could not be installed because an application with that name already exists at the s
The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.
-
Hi All, My requirements are that I have a page button which when selected calls another page and displays values for certain fields. I have to modify the query behind the Button to default values from another field. How do I check and modify the code