Crystal Reports Error in Event Log
Hi all,
I have an error in my events Logs on my Windows server 2003 Server. The Event ID is 4353 and the descirption is : "Either the keycode registry entry does not exist, or the process does not have sufficient permissions to read the keycode.'
I use CR XI.
Since I Have this error message I Can't load my reports.
Any ideas about this case?
Thanks in advance.
Xavier.
Thanks Graham but I don't have this key in the regitry.
In fact, I only use CrystalReports11_NET_EmbeddedInstall.msi to install Crystal Reports DLL.
Any ideas?
Thank you.
Xavier.
Similar Messages
-
Hi,
After a sudden power failure, I guess vista file system is corrupt. I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically ,
Norton antivirus does not start itself. and so on.
After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
"Windows resource protection found corrupt files but was unable to fix some of them"
Unfortunately I am unable to upload log file, so I am pasting CBS.log content here.... Please advice.
Some parts of logs are removed due to limit of 60000 characters.
Please advice.
Regards
2014-07-07 14:55:57, Info CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2014-07-07 14:55:58, Info CSI
00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info CSI
00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info CSI
00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
2014-07-07 14:55:58, Info CBS NonStart: Checking to ensure startup processing was not required.
2014-07-07 14:55:58, Info CBS NonStart: Windows is in Safe Mode.
2014-07-07 14:55:58, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
phase = 0, pdwDisposition = @0x2dfe70
2014-07-07 14:55:58, Info CBS NonStart: Success, startup processing not required as expected.
2014-07-07 14:55:58, Info CSI 00000005 CSI Store 4780952 (0x0048f398) initialized
2014-07-07 14:56:03, Info CSI 00000006 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:03, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:10, Info CSI 00000008 Repair results created:
POQ 0 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
2014-07-07 14:56:10, Info CSI 121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
POQ 0 ends.
2014-07-07 14:56:10, Info CSI 00000009 [SR] Verify complete
2014-07-07 14:56:11, Info CSI 0000000a [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:11, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:19, Info CSI 0000000c Repair results created:
POQ 1 starts:
POQ 42 ends.
2014-07-07 14:58:29, Info CSI 000000b1 [SR] Verify complete
2014-07-07 14:58:30, Info CSI 000000b2 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:30, Info CSI 000000b3 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:38, Info CSI 000000b4 Repair results created:
POQ 43 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
POQ 43 ends.
2014-07-07 14:58:38, Info CSI 000000b5 [SR] Verify complete
2014-07-07 14:58:38, Info CSI 000000b6 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:38, Info CSI 000000b7 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:43, Info CSI 000000b8 Repair results created:
POQ 44 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
2014-07-07 14:58:43, Info CSI -ms"
8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
POQ 107 ends.
2014-07-07 15:08:01, Info CSI 00000213 [SR] Repair complete
2014-07-07 15:08:01, Info CSI 00000214 [SR] Committing transaction
2014-07-07 15:08:01, Info CSI 00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-07 15:08:01, Info CSI 00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
2014-07-07 15:08:01, Info CSI
00000217@2014/7/7:09:38:01.060 CSI perf trace:
CSIPERF:TXCOMMIT;5
2014-07-07 15:08:01, Info CSI 00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
2014-07-07 15:15:58, Info CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
Hi,
First, I would suggest you using last known good configuration:
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support -
Crystal report error on Target Machine
We have to provide application exe to our clients. The application is developed in Visual Studio.Net 2010 and by using SAP crystal report CRforVS_13_0. Client must be able to fire reports on their target machine on which the Dot Net framework and u201CCRforVS_redist_install_64bit_13_0_1u201C run time utility is installed. But it gives a crystal report error on the target machine.
Our development and target machines have Win 7 Professional, 64-bit OS installed.
Kindly provide us with an appropriate run time version for target machine in order to fire reports or any other solution in order to make our project work on target machine.
Thanks!Thanks a lot Don for your valuable suggestions.
We have already taken care of the points which you mentioned in your reply on development side. Also, we have downloaded crystal report from the link which you posted but on DEPLOYMENT side we are unable to run reports from our application.
It gives the notification when we try to install crystal report on a target machine as "You must have visual studio 2010 installed in order to install the crystal report".
The DEPLOYMENT problem we are facing is in RUNTIME environment on TARGET machine. Our TRAGET machine has properly installed Win 7 Professional 64 bit, .NET Framework Ver 4 and CRforVS_redist_install_64bit_13_0_1 . We also have properly installed application on this machine. We got no errors while installing any of the above. The problem starts when we fire a report on target machine from the application.
We get the error as "The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception"
So, we are looking for an appropriate RUN TIME version of Crystal Report which can be installed on the target machine to fire reports (where visual studio 2010 is not installed).
Please help suggest an exact version to download for target machine and the steps if it has a specific procedure.
Thank you!
Ruchir -
Crystal Reports Error - BOBJ is undefined
Post Author: cstent
CA Forum: Crystal Reports
Hi
I recently upgraded from crystal reports 10 to 12 and am now coming accross an error when i try and deploy a crystal report viewer onto a webpage.
Im getting a javascript page error "'bobj' is undefined".
Searching on the web i can only find one other person who has come accross this error, and not posted the solution.
Any ideas?Crystal Reports Error - BOBJ is indefinido
hola para los que no Leen inglés.
este error se dió cuando quise ejecutar el reporte en formato HTML.
las causas son estas, cuano se instala el runtime solo se instala en C:Inetpubwwwrootaspnet_clientsystem_web2_0_50727
alli dentro tiene los formularios, y el javascript para que se ejecute el reporte en html (todo el viewer).
cuando quise ejecutar el reporte tengo otra ruta que se llama c:Inetpubwwwpruebasaspnet_clientsystem_web y me marcaba el error, eso es porque los scripts no se encontraban en esa ruta.
PARA RESOLVERLO solo copiar el system web de wwwroot y pegarlo en la otra ruta. con eso solucionan el problema.
saludos desde MTY Mex. -
VSS snapshot of 1.1TB is ending after few hours with timeout. No errors in event log
Hello,
does someone have experienced issue where starting making snapshot (forum GUI or command line) is taking a lot of time and then it just ends with timeout?
I have scenario on virtualised Windows Web Server 2008 R2 where backup is being made by Idera Backup Software but since it relies on VSS Snapshots then we can just skip this point because making snapshots from directly Windows command line or drive preferences/GUI
is ending with timeout for this single drive after few hours. Affected system has 3 drives: C - 95GB, D-1.06TB and E-120GB. C and E can be backuped correctly and only drive D has problems. System is updated with latest drivers vssadmin for writers returns
list without any errors and snapshot for drive D which ends with timeout is not generating any error in event log. I wanted to configure VSS trace like it is being instructed on this site:
http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.tshoot.doc%2Ft_pdg_traceprfrm.html
but I don't see any trace.txt file on given location. If I remove drive D from backup process it ends without errors. System was restarted many times. Only thing which is visible in windows Event log (application part) is that "The VSS service is shutting
down due to idle timeout." about 4 hours after snapshot making proces is starting.
I've contacted Idera backup about this but they can't help too much if Windows snapshot process is failing. They suggested that something can be wrong with this drive but since this is virtualised machine and all of my VM are being stored on RAID10 disk
array connected to my server using fiber connections then I don't think that this is hardware issue (especially when other two drives are located on the same LUN on disk array).
Any suggestions?
RegardsHi,
Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure.
2. The I/O in D drive is heavy and make the shadow copy I/O failed.
3. Server is too busy to handle the request.
4. The disk is heavily defragment.
Please refer to the articles to troubleshoot the issue:
Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
http://support.microsoft.com/kb/826936/en-us
VSS timeouts during backup? What could contribute to that?
https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Crystal Report Error while doing Email Billing
After emailing approx. 497 invoices utilizing MS Dynamics, we are getting the following errors; In addition, we have to respond to numerous printing prompts presented by Crystal Report, v11.
Error in ASI_SEND_MAIL_WITH_Outlook.
Error: Object require error number: 424
Error in ASI_OpenReport.
Error: Invalid TLV record.
Error Number: -2147206429
What is causing the program to abort with the above Crystal Report errors?Hello,
This may be caused by load. Where one report is not complete before the next one is called.
It would be difficult to determine without having access to the source code.
The trouble-shooting should be done by MS Dynamics since it is coming from inside their application and they can involve Business Objects if they have questions.
Elaine -
hi
from improper installation of coldfusion "Customer variable
in the registry I changed the configuration to the cookies but I
have error in event log
"An I/O operation initiated by the Registry failed
unrecoverably. The Registry could not read in or write out or flush
one of the files that contain the system's image of the Registry. "
and my registry is full, this key
HKLM/Software/Macromedia/coldfusion/CurrentVersion/clients
and each time you restart the coldfusion the old entered the
back regitre
thank for help
patrickHi Steve,
We need to confirm some situations:
1. Did this issue occur when you start Windows or specific application?
2. Could you let us know the complete event log?
And then If it's Windows startup issue, I suggest you perform a startup repair.
Startup Repair
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
Meanwhile, Rename this file: %windir%\panther\setup.etl to setup.old and reboot to see if it could be resolved:
If it's one application issue, reinstall it for test.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Crystal report Error for CRVS2010 sp2 using Push Method
I am trying to pass a dataset to a crystal report viewer using SetDatabaseSource.
I have defined in Crystal to used an ADO .Net Database XML Schema.
I pass a Dataset to the Report By using SetDatbaseSourece and set the ReportSource for the CrystalViewer but I get the error that crdb_adoplus.dll does not exists.
Note that Crystal is looking for crdb_adoplus.dll under subdirectory dotnet1. It resides under win32_x86.
Is this a Crystal Report Problem ?
Is their any docuentation that show how to program for ADO xml dataset using crvs2010 ?
The Error Reads
System.IO.FileNotFoundException was unhandled
Message=Could not load file or assembly 'file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
Source=mscorlib
FileName=file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
FusionLog==== Pre-bind state information ===
LOG: User = WKST04\GARYB
LOG: Where-ref bind. Location = C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
LOG: Appbase = file:///D:/S_and_G/LMS_DotNet/LMS_Solution/LMS/bin/Debug/
LOG: Initial PrivatePath = NULL
Calling assembly : (Unknown).
===
LOG: This bind starts in LoadFrom load context.
WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().
LOG: Using application configuration file: D:\S_and_G\LMS_DotNet\LMS_Solution\LMS\bin\Debug\LMS.vshost.exe.Config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Attempting download of new URL file:///C:/Program Files (x86)/SAP BusinessObjects/Crystal Reports for .NET Framework 4.0/Common/SAP BusinessObjects Enterprise XI 4.0/win32_x86/dotnet1/crdb_adoplus.dll.
StackTrace:
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at CrystalDecisions.ReportAppServer.DataSetConversion.DataSetConverter.DataSetProcessingDelegate(IntPtr arg)
InnerException:Microsoft Visual Studio 2010 Version 10.0.40219.1 SP1Rel
Crystal Reports for .NET Framework 4.0 (CRforVS_13_0_2)
project WPF net 4.0
crReport = new Reports.Buh.Cma.cr_balances_cma_move();
using (DataTable tbl = new DataTable())
using (SqlConnection cn = new SqlConnection(ConnectToDataBase.GetSqlConnectionString()))
using (SqlCommand cmd = cn.CreateCommand())
cmd.CommandText = "proc_name";
cmd.CommandType = CommandType.StoredProcedure;
using (SqlDataAdapter da = new SqlDataAdapter(cmd))
cn.Open();
da.Fill(tbl);
crReport.SetDataSource(tbl);
crReport.SetParameterValue(4, param["report_name"]);
myDateTime.GetServerDate();
crReport.SummaryInfo.ReportAuthor = App.GetPrintInfo();
e.Result = crReport;
erorr_message - Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. Не удается найти указанный файл.
help plz -
I have linked my first Crystal report into SAP (2007A), but when I try to run it I get an error.
Msg header "SAP Crystal AddOn"....Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
I searched the SAP forums, but found nothing regarding this error. Anybody have an idea how to fix? I can't see my Crystal report. Does the report need to be stored in a specific location for it to be called from SAP? I was able to browse to it when I setup the link in SAP.
Edited by: shredder on Nov 17, 2009 11:52 PMHi Shredder ,
Actually you should have posted in reporting and printing forum ..anyway close your previous thread too..
and please take a look at this
*I copy from the other thread *
Client you need to install .net framework 3.5 and Crystal Run time to run reports.
in the client make sure the shared directory is accessible from run without any password
and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
use OLE DB connection
CRYSTAL REPORTS 2008 V1 FOR B1
(click on Installation)
https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
Crystal Reports Integration for SAP Business One
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
in case you have any problem installation go through the demo and make sure you have installed correctly
https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
Hope this helps
Bishal -
Crystal Report: Error while Export to Excel
We are using combination of Crystal Report 10 With
J2EE, Below source code is working fine While
exporting to PDF, MSWord, RTF format.
if(selectedFormat.equals("MSWORD"))
exportOptions.setExportFormatType(ReportExportFormat.MSWord);
if(iPageFrom>0 && iPageTo>0)
RTFWordExportFormatOptions RTFExpOpts=new
RTFWordExportFormatOptions();
RTFExpOpts.setStartPageNumber(iPageFrom);
RTFExpOpts.setEndPageNumber(iPageTo);
exportOptions.setFormatOptions(RTFExpOpts);
But am getting following error while exporting report
to Excel
com.crystaldecisions.report.web.viewer.ReportExportControl
Invalid post back event : {0}
We would like to know, Is SDK feasible for exporting
to excel or not ?
If yes! then Please suggest us for same.
Thanks In advance :)I will make sure that I am on the latest patch ie SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
You can find the rumtimes here:
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
ClickOnce
https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
Recompile the app and then deploy.
What is the .NET Framework used by the application?
Method of deployment?
OS where app is deployed, x86 or x64?
Are you able to export the report from designer ie CR2008 Standalone?
- Saurabh -
Logon failed. Details: mscorlib (Crystal report error during print &export)
Hi,
I'm encountering the problem that the crystal report is working fine in the staging server I developed.
However, after I transported to live server the report having problems when printing and exporting.
Below is the error message prompts to me.
Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\rptPrintSummaryConfineSpace.xml'. Error in File C:\WINDOWS\TEMP\rptPrintSummaryConfineSpace {2D72226E-816A-4D9B-BF93-C9077001F09C}.rpt: Unable to connect: incorrect log on parameters.
I hit this error when I click OK button on export or print option page.
My temp folder at windows is given full permission for IIS_WPG and ASPUSER.
Please help to resolve my problem thank you very much.What version of Crystal Reports?
What CR Service Pack are you on?
What is the database?
How are you connecting to the databse (ODBC, OLE DB, etc.)?
- Ludek -
Crystal Report error on creation connexion on Bex Query
All,
I'm trying to create a Crystal report on Bex Query but unfortunatly I've got an error message when I try to authenticate after clicking the on the new report on the Bex toolbar.
The message is :
Run-Time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Bex is woking fine.
No error in the crw32_*.log
Env:
SAP GUI 7.1
BOE XI 3.1
Crystal Report 2008 SP2
SAP IK 3.1Hi
it is recommended to have the same version of the int.Kit and the CR Designer. ie.
Crystal Reports 2008 V0 + int.Kit 3.0
Crystal Reports 2008 V1 + int.Kit 3.1
Crystal Reports 2008 SP2 + int.Kit 3.1 SP2
Did you install the SP2 for the CR designer after you installed the int.Kit for SAP?
Regards,
Stratos -
Missing VSS System Writer and CAPI2 error in Event Log
Hello,
I'm having problems with making full system backup of Windows 2008 R2 x64. It looks like this is related to missing VSS System Writer. When I'm running command "vssadmin list writers" there is no System Writer in writers list and in event log CAPI2 error (event ID 513) is showing with this description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
TraverseDir : Unable to push subdirectory.
System Error:
Unspecified error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">513</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-03-14T01:06:35.639125000Z" />
<EventRecordID>207975</EventRecordID>
<Correlation />
<Execution ProcessID="968" ThreadID="11588" />
<Channel>Application</Channel>
<Computer>System3</Computer>
<Security />
</System>
<EventData>
<Data>Details: TraverseDir : Unable to push subdirectory. System Error: Unspecified error</Data>
</EventData>
</Event>
any idea what could be wrong?
Thanks in advanceHello ,
Based on the research, the VSS System Writer runs in the context of CryptSvc service on Windows Server 2008. To make the system writer works normally, please open services
console to verify that the Cryptographic Services logon as the credentials of the "Network Service" account.
The VSS system writer can be missing due to several reasons, to isolate this issue, please refer to the following steps to boot the problematic server with clean
boot mode to perform the test.
Steps: Clean Boot
1. On a problematic server perform a clean boot and check if the issue still exists
2. Click Start->Run...->type msconfig and press Enter
3. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
4. Click Startup tab and Disable All startup items
5. Click OK and choose Restart
After the server reboot, please run "vssadmin list writers" to check if the "System Writer" can be displayed.
If the issue still exists, please open a CMD prompt as Run As Administrator and type the following commands to see if it the system writer will be occure.
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
Moreover, based on the experience, it has been reported that there is some permissions issue which can cause this kind of issue. Please follow the steps below and check
if it can be helpful.
On domain controller
1. Open Active Directory Users and Computers
2. Click View and then "Advanced features"
3. Right Click built and click properties.
4. Click security tab.
5. Grant read permission to 'Authenticated Users'
6. Click Apply and OK.
7. Restart Cryptographic Services.
Note: By Default, it should have read permission for the system to take system state backup.
Hope this can be helpful.
MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin -
Crystal Report Error - Mobile Sales - 4.0 SP 12
Some of the users are getting the following error message while trying to open the Crystal Reports from Mobile Sales.
"This program is used to host and to initialize the UF F has encountered a problem and needs to close. We are sorry for the inconvenience."
Can you please let me know where can I find any update about these issues?
Has anyone ever come across this type of error?
Thanks in advance.
Regards,
PijushHi Pijush,
Can you ensure that the following Dlls in the machine are registered:
1. Register all the Dlls and ocx files available in
<<Installation directory>>\Sap\Mobile\bin directory.
2. Register the dlls and ocx files available in
<<Installation directory>>\Sap\Mobile\3rd_party directory.
3. Register the sfabol.dll and msa.dll. It will be available under
<<Installation directory>>\Sap\Mobile (or in the sub-directories
based on how settings are at your end.
But before doing the same, please ensure that you unregister the other Dll first.
As you are aware, the starting application is UFContainer.exe. The same
requires the following Dlls/OCX to be registered:
1. sfabof.dll
2. scrrun.dll in C:\winnt\system32 directory
3. ErrComp.dll
4. UFCore.dll (based on the IE Version)
5. ACTBAR.OCX
6. MSCOMCT2.OCX
7. comdlg32.ocx
8. SSLSTBAR.ocx
9. MSCOMCTL.ocx
Can you please ensure that the above are indeed registered in your case
Some of the above exists in C:\winnt\system32 directory.
If the problem remains it may be because of the IE version you use. Do you use IE7? iIf so did you face the same problems with IE 6 also?
Regards,
Gervase -
hi,
i'm using crystal reports 11 in java, while calling that in tomcat server the following error is occured.
javax.servlet.ServletException: Can't find bundle for base name crystalreportviewer, locale en_US
byeDouble post
http://forum.java.sun.com/thread.jspa?threadID=681292&messageID=3971174#3971174
Maybe you are looking for
-
Unable to retrive the data using self join
I am trying to find the time taken to close a ticket. The ticket goes through various stages: NEW, INPROCESS, CLOSED, REOPENED. If the ticket is reopened then the next stage would be INPROCESS and then CLOSED. The CC_TICKET_INFO table contains inform
-
How to replace the no data found key word in oracle
HI all i have a table that contains employee id, employee name , so if i gave the correct employee id in where clause of select statement it will show employee name, in case if i give the employee id that does not exist in the table it will show 'Emp
-
Mavericks won't install on newest mac mini fusion drive
I have a mac mini, latest version. I have a fusion drive. Mavericks won't install on that drive. I get this message: This disk doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the Disk, choose the
-
how can we get the data from a locked ipod touch or even how to get the passcode
-
aloha...anybody out there get their aiport express to work w/ vista??? i can connect to the internet(unsecured) but i can't get the airport admin utility to work at all and the airport setup assistant does not exist.