Crystal reports for eclipse ver 2 with oracle stored procedures

Does Crystal Reports for Eclipse version 2 support Oracle Stored Procedures.
I have been struggling to get this to work for the last 1 week.
Any help would be appreciated.
Regards
Avinash Tauro

Thank you for your reply.
Does this mean that oracle stored procedures cannot be used at all in the J2EE environment. As even if I create the report using Crystal Reports 2008, I am unable to get it to work.
However It works great on .NET.
Since I can't use stored procedures, I've just copied the query to a bean and am executing it using jdbc. Also I am using the POJO method to link to the report.
This is working fine, except for the maintainance headache, as I have about 25 stored procedures for reporting, with each having a pretty complex query.
I guess I will convert all the stored procedures to front end based query mangement and use the POJO method to connect Crystal Reports.
Any suggestions / recommendations would be helpful.
Regards
Avinash Tauro

Similar Messages

Crystal Reports for Eclipse ver. 2 fails on export to excel

I have downloaded crystal reports for eclipse version 2 (full eclipse setup) and created the sample project.
The new version of JRC looks awesome on the browser. Finally the visual appeal is as good as the .NET version.
However I am having a problem with the export to excel feature. When I select export to excel, I get the following exception
Update: I just realized this problem exists for all the export options
SEVERE: Servlet.service() for servlet CrystalReportViewerServlet threw exception
com.businessobjects.report.web.shared.WebReportingException: getOutputStream() has already been called for this response----
(Full Exception pasted below the message)
I have not made any changes to the sample crystal reports project so I am not really sure what i am missing.
I have Microsoft Vista Ultimate with Crystal Reports 2008 trial version installed.
I have configured eclipse with Tomcat 6.0 and JDK/JRE 1.6
Any help would be appreciated.
Thanks
SEVERE: Servlet.service() for servlet CrystalReportViewerServlet threw exception
com.businessobjects.report.web.shared.WebReportingException: getOutputStream() has already been called for this response---- Error code:0
+ at com.businessobjects.report.web.e.if(Unknown Source)+
+ at com.businessobjects.report.web.e.a(Unknown Source)+
+ at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)+
+ at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)+
+ at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.a(Unknown Source)+
+ at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)+
+ at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)+
+ at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)+
+ at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)+
+ at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)+
+ at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)+
+ at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)+
+ at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)+
+ at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)+
+ at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)+
+ at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)+
+ at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)+
+ at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)+
+ at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)+
+ at java.lang.Thread.run(Unknown Source)+
Edited by: Avinash Tauro on Feb 5, 2009 7:43 AM

I searched on scn and got the listing you mentioned.
The jsp code I am using is as follows.
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="CrystalReport1-viewer" reportSourceVar="CrystalReport1" isOwnPage="true"><crviewer:report reportName="CrystalReport1.rpt" /></crviewer:viewer>
And I get the following exception on selecting any export.
WebReportingException: getOutputStream() has already been called...
So I think maybe this problem is not the same as listed under SAP Note 1199025.
Also the strange thing is I just download the full ganymede version with crystal report for eclipse version 2, and created a default crystal reports website.
The samples were provided automatically, and I have not written any code myself.
Any help would be appreciated.
Regards
Avinash Tauro

DOWNLOAD CRYSTAL REPORTS FOR ECLIPSE 1.0.8 not compatible with java 1.4

Hi,
I understand that this plugin requires java 1.5. However, due to my company's existing infrastructure, I have to use java 1.4 for my web applications.
May I know if there is a older version of the CRYSTAL REPORTS FOR ECLIPSE compatible with java 1.4 (manual installation) available for download ?
Thanks in advance.

You can download Java Runtime version 11.8.8.x [here|http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/1_0/crystalreports-javasdk-11.8.8.zip]
It supported JDK 1.4 for a few different web application server deployment. Check platform.txt in it. However this is very old version of CR runtime and can cause other issues in crystal reports rendering etc. in which case the only solution would be to get the latest CRJ runtime.

How to use a stored procedure as a datasource in Crystal Report for Eclipse

Hi All,
I've written a stored procedure in oracle 10g with few input parameters and one refcursor output parameter. I want to use this stored procedure as a data source for creating a report in "Crystal Report For Eclipse 3.6.0".
When I tried to add this stored procedure to the report using the connection explorer, I don't see any option to do this. But when I try to add any table, it shows options like "Add to the current report"....
Can anybody assist me how to use a stored procedure as a data source in "Crystal Report For Eclipse"?
Which driver should I use to connect to the oracle database? I tried using JDBC Driver for Oracle.
Thanks in advance.

Did you solve your problem? How did you do?

Crystal Reports for Eclipse and CR2008 with subreports

SQL-Server 2005
CR 2008, Ver.12.0.0.683
Crystal Reports for Eclipse Plug-in Details:
all Plug-in-files from Business Objects have the version 12.2.200.r454
I create a report with subreports in CR2008. It's running perfect.
When I load this report with subreports to Eclipse I can see the subreports in the report and I can click into the subreports. Each subreport is working in Preview, but when I want to preview the whole report with the subreports I get a black screen and the error
eclipse.buildId=M20080911-1700
java.version=1.6.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86
Error
Fri Feb 06 08:13:34 CET 2009
Unknown Error (java.lang.NullPointerException)
Info
Fri Feb 06 08:13:34 CET 2009
Plug-in Info: Business Objects, an SAP company - 12.2.200.r454
java.lang.NullPointerException
at com.crystaldecisions.reports.queryengine.QueryInfo.wF(Unknown Source)
at com.crystaldecisions.reports.datafoundation.DFQuery.if(Unknown Source)
at com.crystaldecisions.reports.datafoundation.DFQuery.a(Unknown Source)
at com.crystaldecisions.reports.datafoundation.DFQuery.int(Unknown Source)
at com.crystaldecisions.reports.datalayer.a.do(Unknown Source)
at com.crystaldecisions.reports.dataengine.m.l(Unknown Source)
at com.crystaldecisions.reports.dataengine.m.b(Unknown Source)
at com.crystaldecisions.reports.dataengine.j.b(Unknown Source)
at com.crystaldecisions.reports.dataengine.m.o(Unknown Source)
at com.crystaldecisions.reports.dataengine.m.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.j.case(Unknown Source)
at com.crystaldecisions.reports.dataengine.h.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source)
at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fm(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.Y(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.lightmodel.FCMPageFormatter.goToPage(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.B(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.A(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.A(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.call(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.A(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.syncExecute(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages.create(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller.getValidFormattedPages(Unknown Source)
at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller$3.doWork(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$_B.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Any good ideas?
Thanks in advance.
Regards
Jens

Hi Ted,
the error happens in the preview of the main report. Each subreport preview in this main report is running.
Regards
Jens
Edited by: Jens Kutsche on Feb 9, 2009 8:48 AM
The preview of the main report is running in CR2008.
Edited by: Jens Kutsche on Feb 9, 2009 8:56 AM
When I start this main report with a jsp I get the same error:
java.lang.NullPointerException

How to use stored procedure in crystal report for eclipse

Hi;
I am working on crystal report for eclipse 2.0 and trying to use stored procedure in report .It is created from Oracle but it is not showing any dependencies
CREATE OR REPLACE procedure ACT_DB.getCostTransferDetails
        p_In_Contract_ID         varchar2 DEFAULT '*',
        p_In_Status_ID           varchar2 DEFAULT '*',
        p_In_COST_TRAN_DATE      varchar2 DEFAULT '*',
        p_In_DEPT_ID             varchar2 DEFAULT '*',
        p_In_PROJECT_ID          varchar2 DEFAULT '*',
        p_In_EMPLOYEE_ID         varchar2 DEFAULT '*',
        p_Out_CostTransfer_Cusor OUT COST_TRANSFER_PACKAGE.COST_TRANSFER_TYPE
AS
BEGIN
        OPEN p_Out_CostTransfer_Cusor FOR
        SELECT
            header.cost_tran_id,
            header.cost_tran_date,
            header.total_credit_amount,
            header.total_debit_amount,
            header.transfer_status,
            header.updated_by,
            header.added_by,
            header.trf_over_ninety_days,
            header.business_unit_id,
            header.equip_approval,
            header.batch_desc,
            details.opr_unit_id,
            status.status_id,
            details.fund_code_id,
            details.prgm_code_id,
            details.class_id,
            details.activity_id,
            details.product_id,
            details.status_id,
            details.transaction_amount,
            details.jrnl_date,
            details.adjust_prcnt,
            details.adjust_amnt,
            details.details_equip_approval,
            details.detail_desc,
            details.account_id,
            details.project_id,
            details.dept_id,
            details.contract_id,
            details.reason_code_id,
            details.jrnl_id,
            employee.f_name,
            employee.l_name,
            employee.employee_id,
            project.project_id,
            project.project_status,
            --header.transfer_status,
            contracts.contract_desc
          FROM header, details, status, employee, department, project, contracts
         WHERE     (header.cost_tran_id = details.cost_tran_id)
                AND (header.cost_tran_date = details.cost_tran_date)
                AND (header.transfer_status = status.status_id)
                AND (department.dept_id = details.dept_id)
                AND (department.dept_id = employee.dept_id)
                AND (project.project_id = details.project_id)
                AND (contracts.contract_id = details.contract_id)
                AND (details.Contract_ID = p_In_Contract_ID OR p_In_Contract_ID ='*' )
                AND (header.TRANSFER_STATUS = p_In_Status_ID OR p_In_Status_ID ='*' )
                AND (TO_CHAR(details.COST_TRAN_DATE, 'MM/DD/YYYY') = p_In_COST_TRAN_DATE OR p_In_COST_TRAN_DATE ='*' )
                AND (details.DEPT_ID = p_In_DEPT_ID OR p_In_DEPT_ID ='*' )
                AND (details.PROJECT_ID = p_In_PROJECT_ID OR p_In_PROJECT_ID ='*' )
                AND (header.ADDED_BY = p_In_EMPLOYEE_ID OR '*'=p_In_EMPLOYEE_ID )
Can any another way to make procedure
Thanx
Regards ,
Amol

Hi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj

Problem with Crystal reports for Eclipse and Postgres-databases

Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
Arnold

Your issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda

How to use Crystal Report Server with Crystal Reports for Eclipse

Hi,
is it possible to use Crystal Reports for Eclipse with the Crystal Report Server
like i can do it in Crystal Reports.
For Example open a Report file directly from the server edit and save there.
Thanks
Thomas

Yes, you can use the CR Server product in your Eclipse project. However, you will need to use the RAS SDK in your project instead of the CR4E SDK.
For more information about the RAS SDK, visit the DevLibrary.
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
-MJ

Crystal Reports for Eclipse and CR2008

SQL-Server 2005
CR 2008, Ver.12.0.0.683
Crystal Reports for Eclipse Plug-in Details:
all Plug-in-files from Business Objects have the Versions 1.0.4.v1094 or 11.8.0.v20060727 except "CR for Eclipse Dev.Guide": Ver. 1.0.0.v1094
I created a report with CR 2008 and load this report with eclipse. A preview in CR and eclipse is running perfect.
When I bind this report to a jsp I get the error "Es wurde keine Rowsetspalte für das SQL-Ausdrucksfeld "strRefNo" gefunden", in english
"no rowset-column for sql-statement "strRefNo""
General this kind of SQL-statement is not working. This statement is a function which needs first a value from the database.
When this value is fixed in the statement, the report is running in the jsp otherwise I get the error.
When I delete this statement in eclispe, save this report, redo my delete and save the report again, the report is running with jsp!
May be, there is a version conflict between CR and eclipse.
I have to create the reports in CR2008 but I can not save the report in CR2008 to an older version.
Is there a newer version for eclipse, which works with CR2008? I could not find any other version.
Do you have other ideas?
Thanks!
Jens

Hi Bryan,
thank you for your good informations.
I have downloaded the complete new eclipse and I don't get this error anymore.
But in the next step, I tried a report with subreports. This is complete not working in Eclipse. When I load this report to Eclipse Ican see and click into the subreports. Each subreport is working in Preview, but the whole reports does not work (black screen), I get the error
eclipse.buildId=M20080911-1700
java.version=1.6.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86
Error
Fri Feb 06 08:13:34 CET 2009
Unknown Error (java.lang.NullPointerException)
Info
Fri Feb 06 08:13:34 CET 2009
Plug-in Info: Business Objects, an SAP company - 12.2.200.r454
java.lang.NullPointerException
 at com.crystaldecisions.reports.queryengine.QueryInfo.wF(Unknown Source)
 at com.crystaldecisions.reports.datafoundation.DFQuery.if(Unknown Source)
 at com.crystaldecisions.reports.datafoundation.DFQuery.a(Unknown Source)
 at com.crystaldecisions.reports.datafoundation.DFQuery.int(Unknown Source)
 at com.crystaldecisions.reports.datalayer.a.do(Unknown Source)
 at com.crystaldecisions.reports.dataengine.m.l(Unknown Source)
 at com.crystaldecisions.reports.dataengine.m.b(Unknown Source)
 at com.crystaldecisions.reports.dataengine.j.b(Unknown Source)
 at com.crystaldecisions.reports.dataengine.m.o(Unknown Source)
 at com.crystaldecisions.reports.dataengine.m.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.j.case(Unknown Source)
 at com.crystaldecisions.reports.dataengine.h.<init>(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fm(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.Y(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source)
 at com.crystaldecisions.reports.formatter.formatter.lightmodel.FCMPageFormatter.goToPage(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.B(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.A(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.A(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.call(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.A(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing.syncExecute(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages.create(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller.getValidFormattedPages(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedDocumentModeller$3.doWork(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$_B.run(Unknown Source)
 at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
 at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Any other good idea?
Thanks in advance.
Regards
Jens
Edited by: Jens Kutsche on Feb 6, 2009 8:27 AM
Info
Fri Feb 06 08:13:34 CET 2009
Plug-in Info: Business Objects, an SAP company - 12.2.200.r454

Connection problem in Crystal Reports for Eclipse(SQL Server Express 2008)

I tried to connect into a local SQL Server Express 2008 database in Crystal Reports for Eclipse (CR4E), but always got the Ping failed message(TCP/IP connection failed) even I tests completed successfully using my Window XP Adminstrators Tools (SQL Server ODBC Data Source Test). I can connect successfully to a remote network Oracle database in CR4E. I would like to know
that is there any one who connect SQL Server Express 2008 local database successfully in CR4E?

Don,
Thanks for your suggestions. I will follow your instruction to connect to SQL Server Express 2008 database latelly. I can connect successfully with different Oracle databases (10g) in CR4E. I will try to connect MySQL database and Postgres database in CR4E to see if they can be successful or not. My project involves international entities with emphsizing in using OPEN SOURCE softwares (which means FREE - no license fees) in .NET platform for Oracle, SQL Server Express, MySQL and Postgres database servers. I am responsible for reports generation. I hope that CR4E can be connected successfully to SQL Server Express 2008 database server, otherwise I have to use JFreeReport/JFreeChart tools to do reports generation .

Crystal Reports for Eclipse 2.0 - Service Pack 1 - is Now Available!

Service Pack 1 for Crystal Reports for Eclipse 2.0 is now available!
Readme file listing the fixes is here:
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4ev2_readme.pdf]
Kirby Leong in another post listed the download URLs, which I'll copy here:
CR4E Runtime Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/crjava-runtime_12.2.202.zip]
CR4E Manual Install Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e_2.0.1.zip]
CR4E All-In-One Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e-all-in-one-win_2.0.1.zip]
CR4E Language Packs
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls1_2.0.1.zip]
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls2_2.0.1.zip]
If you wish to use the Eclipse IDE Software Updater:
1. Start Eclipse 3.4.1 (Gemini) IDE.
2. Select Help -> Software Updates...
3. Select the "Available Software" tab.
4. Click the "Manage Sites..." button.
5. If you do not see the following URL listed:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/
 then click "Add..." and add it.
6. Select the above URL in the "Available Software Sites", then click "OK".
7. The Available Software should now list the above URL. Open the node, and you should see "Crystal Reports for Eclipse".
8. Check all checkboxes for "Crystal Reports for Eclipse", and "Install..."
After successful update, you'll see version 2.0.1 listed in Help -> About Eclipse SDK and clicking on the "Crystal Reports for Eclipse" icon (blue swoosh with green diamond).
If you don't see that version listed, here's some troubleshooting tips:
Open a web browser, and Go to the following URL:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/site.xml
You should get back a XML file listed the current CR4E plugin and language packs versions. If you get an error instead, it may be because (1) you're in a locked down environment that won't let you access that site, or (2) the CR4E Update Site may be down for maintenance. If the former, you'll have to download the updates by some other means and upgrade manually.

hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
 String reportName = "report.rpt";
 ReportClientDocument clientDoc = new ReportClientDocument();
 clientDoc.open(reportName, 0);
 String tableAlias = "Command";
 clientDoc.getDatabaseController().setDataSource(
 myResult("SELECT * FROM table"),
 tableAlias,"resultsetTable");
 CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
 crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
 crystalReportPageViewer.processHttpRequest(
 request,
 response,
 application,
 null);
} catch (ReportSDKExceptionBase e) {
 e.printStackTrace();
 out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: 無法預期的資料庫連線器錯誤---- Error code:-2147467259 Error code name:failed
Please help me and tell me why....

Accessing test.jsp page outside Crystal Reports for Eclipse

 Hello All,Iam very very new to Crystal Reports for Eclipse...I have created a .jsp called as test.jsp (by using the help file which i downloaded from diamond)..I have created a report called CrystalReport1.rpt and i have integreatd the same with a .jsp called test.jspI can see the file running absoultely fine in Eclipse but when I ty to open using Internet explorer by gidving <a href="http://localhost:8080/WebContent/test.jsp">http://localhost:8080/WebContent/test.jsp</a> iam getting nothing...Can anyone here help to open the same file using Internet explorer?The reason why i want to open it Internet explorer is becasuse i wanted to integreat the new jsp file with my current application which is developed using jsp...Is it require to deploy the application something like we do in Visual Studio?Thanks in advanceJack 

Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Crystal Report For Eclipse: POJO problem

Hi all,
I am using crystal report for eclipse basic version and used POJO-method to implement for users to viewing my report.
I did the following:
I created a sql page (create a target table) and import into crystal report (through crystal report designer under eclipse environment) E.g. let's say I created a table with 10 fields and imported into the crystal report.
Then I drag and drop through crystal report for my report design.
Later if I need to add one more field .....
I need to modified my SQL page and re-import the sql page into my crystal report. HOWEVER, through this re-import process, I lost all the detail/information on the existing report (that mean I need to re-design my report through the designer under eclipse environmet).
My question is: Is there any better way for me to implement my report ???
THANKS .. THANKS a lot as this problem make me use a lot of my time ... THANKS

In the sceario you have described (using a SQLPage as the datasource for the report), unfortunately, this is a limitation of the workflow. If you need to change the SQL, then you essentially need to remove and re-add it to the report which means replacing all the fields on the report.
Instead, I would recommend using a class as the report's datasource. The class would represent the fields that would be used in your POJO object. This way if you need to modify the fields in the POJO, you can simply update the class and use the Verify Database to update the report.
-MJ

Crystal reports for Eclipse (CR4E) - taking long time to load

HI
We have used your Crystal reports for Eclipse (CR4E) but it is taking long time to load if the record count is more than 3 million
Our architecture is we are using Oracle DB and web sphere application server both are running on SUN server,
If we buy original version it will work fast?
Or do you have alternative solution for this, this one to implement one of our major client

You have 3 million records, this is going to take time to process. Also, you don't define what is meant by a long time. Are we talking a couple of minutes, or something more like 20 minutes?
The real question is, do you really need the report to bring back 3 million records? Could you do any filtering of the data to reduce the number of records being brought back? Also, 3 million records could vary. is each record a single field, or is it multiple. The more fields, the larger the result set.
Another thing you want to look at, is just how long is the query taking to run against the database.

Using .csv files in Crystal Reports for Eclipse?

I recently installed crystal reports for Eclipse and much of the basic CR functionality seems to be there, but then I added a .csv file as an ODA flat file data source and I can see it in my "Data Source Explorer", but can not seem to drag it into my report to actually report on the data in this file. Am I missing some basic step?
Thanks,
Chris

Not all data sources available via the Eclipse Database Explorer component are supported with Crystal Reports for Eclipse.
CSV data sources currently isn't on the [Supported Platforms doc|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c69834-cfc4-2b10-da81-960222254295]
Sincerely,
Ted Ueda

Crystal reports for eclipse ver 2 with oracle stored procedures

Similar Messages

Maybe you are looking for