Crystal Reports has stopped working

I just installed Crystal Reports 2013. I am using Windows 7. The program opens up and everything looks normal but when I open a blank report and try to create a new connection, it immediately gives me the error "Crystal Reports has stopped working" and closes me out of the program. I talked to support and they told me to uninstall and reinstall the program. I tried that but still get the same exact error. Another support rep sent me an update to try. I tried that with the same results. Can someone please help me with this?

Hi Try setting the DEP.
1) Click Start > Run, > type sysdm.cpl, and then click OK.
2) On the Advanced tab, under Performance, click Settings.
3) On the Data Execution Prevention tab, click Turn on DEP for all programs and services except those I select > then click Add to add the CRW32.exe (You need to browse to the executable file)
P.S  Solution provided by AbhilashKumar

Similar Messages

  • APPCRASH - "Crystal Reports has stopped working"- windows message

    Hi,
    I had installed Crystal reports 2008 using valid license keycode on Windows Server 2008 machine ( crystal software not registered it in Sap portal for additional support)  This was used for crystal reports development in .Net for few days, After 1 month or little more , the crystal reports stopped working and when launched from Start -> Programs -> Crystal Reports 2008 displayed a windows error message " Crystal Reports has stopped working ".
    Following is the details about Problem from windows message
    Problem Event name: APPCRASH
    Application name: crw32.exe
    Application version : 12.0.0.683
    Fault Module Name: x2rpclB5.dll
    Exception Code : c0000005
    OS Version : 6.0.6001.2.1.0.274.10
    I Uninstalled and reinstalled the application with valid license keycode and registered as well, but still the error remains same when the application is started.
    Kindly suggest on how to resolve this issue.

    Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
    Reports design, Crystal Reports (exe) installation and other issues should be posted to the [Report Design forum|SAP Crystal Reports;
    Now, looking up the DLL,(x2rpclB5.dll) it appears to be a Xerox printer driver(?). You mention that this started to happen recently, so the question would be; was a Xerox printer driver installed? Also, see if either uninstalling the printer driver or installing any available updates fomr Xerox will resolve the issue.
    Ludek

  • Crystal Reports XI crashes says "Crystal Reports has stopped working"

    I'm on Crystal Reports Xi release 2 sp2, with windows 7, I also have visual studio 2008 installed.
    When I try to add any fields or objects to a report in crystal reports it crashes and throws up a windows generic error message that says "Crystal Reports has stopped working"  There is no additional error information besides that...  I've tried a number of fixes, too many to list here, but no go, and apparently calling for tech support requires me to pay more money! ack.  We've already paid for the product, I just want to use it..
    Does this version of crystal reports even work on windows 7?  if I could get a straight answer on that it would be a start anyway...
    Sorry to be snippy, I'm just frustrated!!!

    Upgrading to SP6 solved the issue.  I originally thought sp4 was the newest because of this page: http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp
    which is out of date...
    Thanks for the quick fix.

  • Error - Crystal Reports has stopped working

    I have downloaded the CR 2011 trial, and I am trying to open a Crystal 7 report.  The strange thing is that it was opening OK before, but has now stopped opening.   Some of the Crystal 7 reports I have are able to be opened, and others are not.
    The error is not helpful - Crystal Reports has stopped working.  Windows is checking for a solution to the problem.   I have uninstalled and reinstalled the CR 2011 trial, but this has not helped.
    Has anyone had a similar problem?

    Thomas,
    Can you create a brand new reports against those Stored Procedures?
    Are the .rpt files from CR 7 still have the old "last modified" date?
    What if you try a middle CR version, like install temporary CR XIR2, open and save the reports and then try to open in the latest version?
    Do you know if failing reports have any external links like Linked pictures, OLE objects, etc.?
    Have you ever used Process Monitor utility? It may be helpful to identify what CR is trying to do.
    Vitaly.

  • Crystal Reports has stopped working with Windows 7 and demo database

    I'm trying to get back up to speed on Crystal Reports after 10 years away. I'm running Crystal Reports 2008 Standard with the just-released Service Pack 3 (same symptom with SP2).
    So I downloaded the demo database and tried creating a new report. No problems creating a simple customer list. When I add the Orders table and link the CustomerID columns and then add the OrderDate column to the report, everything works fine. But as soon as I add the OrderID or OrderDate column, the application crashes.
    Culprit seems to be MSVCR80.dll. Here's the log:
    Faulting application name: crw32.exe, version: 12.3.0.601, time stamp: 0x4bd05d31
    Faulting module name: MSVCR80.dll, version: 8.0.50727.4927, time stamp: 0x4a2752ff
    Exception code: 0xc000000d
    Fault offset: 0x00008aa0
    Faulting process id: 0x1944
    Faulting application start time: 0x01cb0139cfafeb40
    Faulting application path: C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
    Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\MSVCR80.dll
    Report Id: 3b28c990-6d2d-11df-b9d8-00080d72c9f2
    Suggestions? Thanks in advance.

    Hello,
    It may be that something was "fixed" and our default xml file falls out of the Standards now.
    Are you wanting to connect to SQL or XML?
    Go to Microsoft's site and search for C++ distribution and download and install the recommended one for windows 7. It may be that part is corrupt or our installer thinks it is there. Try doing a Repair install and custom options to select all of the DB drivers and exports types to see if that resolves the issue.
    Thank you
    Don

  • Crystal Reports XI  stopped working error message on a Windows Server 2008

    We recently installed Crystal Report XI  in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
    "Crystal Reports has stopped working"
    Problem signature:
    Problem Event Name: BEX
    Application Name: crw32.exe
    Application Version: 11.0.0.1282
    Application Timestamp: 422d5c77
    Fault Module Name: StackHash_1fc1
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 7ef2fbfc
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.272.7
    Locale ID: 1033
    Additional Information 1: 1fc1
    Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
    Additional Information 3: 2f92
    Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
    Any recommendation on what is causing this error?
    Thanks,
    Luis

    Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
    Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
    The error I'm getting when trying to start the service is:
    The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
    I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

  • Crystal Reports 8 stopps working when printing

    I recently upgraded to CR 8 along with several other co-workers. I am able to launch the app and create reports just fine, but when I attempt to go to anything that has to do with printers, the app errors out.
    When I attempt to print directly from the app, I get a message saying that Crystal Reports has stopped working and it asks if I want to close or debug.
    When I attempt to go to the Page Setup, I get an error message saying "Out of Memory"
    Other team members do not have these issues.
    I have tried re-installing the app, but am still getting the same problems.
    I am able to export the report and print from there, but not directly from CR 8.
    I attempted to instal Service Pack 3 and got an error message saying that I did not have a recent enough version of the app.

    Hi Dave, 
    First off, please minimize any version confusion.  You keep referring to Crystal 8 which is over 10 years old but you told Don you are using Crystal 2008.  That would definintely cause problems. 
    If you are upgrading from XI r2 and you are getting that upgrade message, that leads me to believe Crystal XI wasn't properly upgraded on your machine.  I think the 2008 sp3 upgrade is still seeing XI r2.  This may also be the reason 2008 is crashing when you try printing. 
    When you open Crystal 2008, go to Help | About Crystal Reports.  I'm interested in knowing the version number. 
    When you uninstalled Crystal, what version is listed in the Add/Remove Software?  What version did you uninstall? 
    Did you get any error messages when you uninstalled? 
    Thanks,
    Brian

  • Hello friends, my itunes has stopped working. and the problem report stated the following: Fault Module Name:     KERNELBASE.dll   Fault Module Version:     6.1.7601.17514.................. please can anybody help me?hello friends, my itunes has stopped w

    Hello everybody> my itunes has stopped working and the problem report stated the following:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.5.3.3
      Application Timestamp:    4f14cc3d
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.17514
      Fault Module Timestamp:    4ce7b8f0
      Exception Code:    80000003
      Exception Offset:    0003381b
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    can anybody help me?

    Are you seeing a similar message when launching QuickTime Player?
    What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
    Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Hpqdirec.exe has stopped working report: HP Solution Centre

    Has any progress been made with resolving the "hpqdirec.exe has stopped working" problem?  No positive suggestions have been put forward in the past other than to try using HP Print and Scan Doctor, which I tried unscussfully prior to looking for a solution on the forum. I suspect it may be due to me having recenhtly used "Driver Booster 2.3 (Free)" to download and update a whole variety of drivers, including HP Drivers.  Since then "HP Solution Centre" just hangs until cancelled and then the "hpqdirec.exe has stopped working" advice appears.  HP Print and Scan Doctor reports no problems when the Scan option is selected and if Test Scan is then selected, one can still Scan, but it is only a once off. Any direction would be much appreciated. John

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are facing issues with regards to one of the Windows component which is missing
    We will surely assist you with this issue
    Please click on the below shown link to find the steps involved in resolving the issue
    http://tinyurl.com/khb65xv
    You can Check your warranty Here to verify the status if required 
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • WebDev.WebServer.Exe has stopped working

    Hello,
    Since I have applied the SP2 to Crystal Reports 2008 on the server, I get this error every time I execute a report from any ASP.NET application.
    Before the SP2 all works fine, and now the application crashed in depuration (WebDev.WebServer.Exe has stopped working) as well in runtime mode (IIS Aplication pool is stopped).
    My enviroment is Windows Server 2008 and VS2008.
    Thanks
    Blas

    Is this on your development computer? On a deployed computer? If on a deployed computer, what runtime did you install? How does a new simple app behave? A one line app with a saved data report will be a good place to start;
    crystalreportviewer1.report source = <path to report>
    Define "crashed".
    Do you see any errors, warning, etc. in the event viewer?
    Do you see the "crash" on start if the app, on first run of a report? On second or subsequent report?
    Are you viewing the report? Exporting? Printing?
    Ludek

  • Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

    AdapterDeviceID: 0x9712
    AdapterDriverVersion: 8.861.1.2000
    AdapterSubsysID: 164c103c
    AdapterVendorID: 0x1002
    Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
    AvailablePageFile: 13967405056
    AvailablePhysicalMemory: 6222434304
    AvailableVirtualMemory: 3783245824
    BIOS_Manufacturer: Hewlett-Packard
    BlockedDllList:
    BreakpadReserveAddress: 46661632
    BreakpadReserveSize: 41943040
    BuildID: 20141113143407
    CrashTime: 1417153956
    EMCheckCompatibility: true
    EventLoopNestingLevel: 1
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1416895140
    Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
    D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 175
    StartupTime: 1417153798
    SystemMemoryUsePercentage: 25
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 16630353920
    TotalPhysicalMemory: 8316153856
    TotalVirtualMemory: 4294836224
    URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
    Vendor: Mozilla
    Version: 33.1.1
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
    RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP TCP Service Provider : 2 : 1 :
    RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    RSVP UDP Service Provider : 2 : 2 :
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.
    AND:
    A plugin container for firefox has stopped working.
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 33.1.1.5430
    Application Timestamp: 54656826
    Fault Module Name: mozalloc.dll
    Fault Module Version: 33.1.1.5430
    Fault Module Timestamp: 54654321
    Exception Code: 80000003
    Exception Offset: 00001425
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • ITunes has stopped working ...Running Windows 7(64)

    I upgraded my home PC Desktop to Windows 7 earlier this year and had no trouble bringing over iTunes from my previous platform (Windows XP).
    I recently returned home to the US from a work assignment out of the country and because my iTunes resides on my home PC desktop, I didn't open up iTunes for the past 6 weeks.  During this time Apple released iTunes 10.5. When I returned home, the old version of iTunes was still working. However, when I upgraded to iTunes 10.5, iTunes stopped working. The error message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    I have worked through the following knowlege bulletins (nothing has fixed my problem):
    (a)" iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"
    (b) "iTunes: Troubleshooting issues with third-party iTunes plug-ins"
    (c) "iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio"
    (d) "Removing and reinstalling iTunes, QuickTime, and other software components for Windows vista or Windows 7"
    (e) "iTunes for Windows: system restarts, blue screen, or quits unexpectedly when accessing iTunes Store"
    the last bulletin (e), recommended ensuring that my drivers were up-to-date. So I also updated my drivers.
    Lastly, I contacted iTunes Store Customer Support (although my problem isn't with the store, it is upgraded iTunes running on windows 7). They told me the issue was "outside (their) expertise" and recommended I look at this discussion board. 
    Here is the information I found under Event Viewer:
    ==================================================================
    Log Name:      Application
    Source:        Application Error
    Date:          11/27/2011 11:46:01 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Theresa-HP
    Description:
    Faulting application name: iTunes.exe, version: 10.5.1.42, time stamp: 0x4ebf7d7c
    Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
    Exception code: 0xc000000d
    Fault offset: 0x00026b72
    Faulting process id: 0x13b0
    Faulting application start time: 0x01ccad3d27f6b2ff
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d 09154e044272b9a\MSVCR80.dll
    Report Id: 6ef58025-1930-11e1-a798-e06995d0a503
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-11-27T19:46:01.000000000Z" />
        <EventRecordID>9927</EventRecordID>
        <Channel>Application</Channel>
        <Computer>Theresa-HP</Computer>
        <Security />
      </System>
      <EventData>
        <Data>iTunes.exe</Data>
        <Data>10.5.1.42</Data>
        <Data>4ebf7d7c</Data>
        <Data>MSVCR80.dll</Data>
        <Data>8.0.50727.6195</Data>
        <Data>4dcddbf3</Data>
        <Data>c000000d</Data>
        <Data>00026b72</Data>
        <Data>13b0</Data>
        <Data>01ccad3d27f6b2ff</Data>
        <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
        <Data>C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_ none_d09154e044272b9a\MSVCR80.dll</Data>
        <Data>6ef58025-1930-11e1-a798-e06995d0a503</Data>
      </EventData>
    </Event>
    ==================================================================
    It seems that I am not alone in having this problem!  Are there any experts out there who want to earn the undying gratitude of the technically challenged (or a few expert points?)
    Thanks for listening,
    Theresa
    PS - someone recommended uninstalling Apple Quick Time Player.  I don't have Quick Time Player.

    I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
    The following solution worked for me:
    COPY    QTMovieWin.dll
    FROM    c:\program files (x86)\common files\apple\apple application support\
    INTO     c:\program files (x86)/iTunes

  • Adobe Photoshop CS4 has stopped working

    I recently purchased and installed Adobe CS4 Design Premium for my new sony vaio LV. Right away I noticed that Photoshop and Bridge do not have the proper logos in the application list. Once I opened Photoshop (64 bit) It seemed to work fine. I opened and image file, but when I tried to add and edit text, the program became inactive and Windows popped up to say that the program had stopped working. Windows then checks for a solution to the problem, determines nothing and does not present an error report. I can't seem to keep the program open long enough to perform even one task. I saved/attached 2 screen shots in word.

    Could a bad install explain why mine has "stopped working"? I've had to install it twice because I keep getting that message, and I've had to re-install it twice because of having to do a couple system recoveries. I'm tired of calling Adobe to tell them that I need to re-register my software! I don't understand why I keep getting that message.
    And, fwiw, if I first open the non-64bit version, then close it, the 64bit version will open without that message. What gives? I've also run the cleaner, and that helped for a little while, but started getting the error again.

  • Merge to HDR Pro from LR5. After applying preset and during conversion of file, Iget an error message "Adobe Photoshop CC 2014 has stopped working" and closing PS

    In LR5 i do: Merge to HDR Pro. After I apply my preset and PS attempts to convert HDR file, I get an error message from PS: "Adobe Photoshop CC 2014 has stopped working". Then PS Closes.
    My source files are 5 NEF files of 28 MB. I select 16-bit, I also tried 8-bit. No difference. Same error message.
    I have a Toshiba Quosmio X870 with Intel i7 3610QM @ 2,30 GHz, 16 GB RAM, Windows 7x64 HP SP 1, 7,3 Performance Index
    Any suggestions?

    As the crash report says - your outdated video card driver is crashing. You need to update your video card driver from the GPU maker's website (AMD/ATI in this case).

  • Every time I try to import a CD I get "iTunes has stopped working"

    I updated to the new 9.0.3.15 version of ITunes a couple of weeks back and ever since I have not been able to import CD's?
    It seems it works with every else syncing etc but not importing CD's.
    Every time I try to import a CD it will start then within a few seconds I get the message "iTunes has stopped working" and another message saying Windows is looking for a solution.
    I have tried going into Control Panel and Programs and repairing the installation but no luck.
    Anyone know how I can fix this.

    I can see messages for other programs that have had issues but nothing for iTunes.
    Hmmmm.
    Maybe try provoking the error another two or three times, taking a careful note of the time showing on the PC. Now head back into the Action Center. Is there a problem report for any application or operating system component that appears regularly at the same time as the iTunes errors?
    If so, paste a copy of a typical error report for that in a reply. (Fingers crossed that might get us a bit closer to understanding what is afoot.)

Maybe you are looking for