Crystal Reports Server 2008 - CMC Login Error - Bad Port Number in CMS Name

This post is similar to previous post: Error: Bad port number in CMS name fe80:0:0:0:152f:77a:382d:6d8e:6400 null - which remains unanswered.
In this case, I have installed a full licensed version of CRS 2008 on Windows Server 2008. I'm using Tomcat 5.5 and IIS 7.0.
The error we get when trying to log into the server using SERVERNAME:6400 (the default), is:
u2022Error: Bad port number in CMS name fe80:0:0:0:6509:bde9:93bf:f9de:6400 null
We neglected to install IIS prior to installing CRS, so when we realized our error, we installed IIS and then uninstalled/reinstalled CRS 2008.
Prior to reinstalling CRS, the CMC allowed us to login with no problem, which leads me to suspect that CRS may not have uninstalled cleanly.
Can anyone help me to understand what causes this error, and what steps can be taken to resolve it?

Hi,
Try to check the port number 6400 is assigned properly to CMS. Please make sure that its not assigned to any other Products.
Thanks,
SK.

Similar Messages

How to get past Crystal Reports Server 2008 Linux install error

Hi,
     During the install of Crystal Reports Server 2008 on Red Hat Linux we select use an existing DB (Oracle) and it prompts for:
Crystal Reports Server 2008 Setup
Enter the information for your new CMS
Oracle TNSNAME :
[SANDBOX                     ] *
User ID :
[crystal_rpt                 ] *
Password :
which then gives me:
Crystal Reports Server 2008 Setup
ERROR
Failure to validate the database credential has a potential to crash the database at a later stage. Enter the correct information.
It doesn't let me get past this and just send me back to the previous screen. I've check and re-checked and the information TNSNAME, User ID, and Password are all correct. Now I can exit out the install and sqlplus to the database just fine with all that same information.
What does this error mean? And how do I get past it?
Thanks,
~Jet

Hi Jet,
I've go the same problem. Have you solved this problem?
Regards,
Aldo

Crystal Report Server 2008 Embedded RAS Error

We have installed crystal server 2008 embedded on a Microsoft 2008 server 64 bit box, with no error being reported during the install. No updates or patches have been applied and we selected the default
installation. We then have been attemping to run a sample report that we downloaded off of SAP's support site to confirm that the installation was a success. We have not be able to accomplish this.
Going through the Sizing and Configuration Guide for OEM Partners on page three it talks about a registry key that points to the default location that all the reports need to be housed at in order for the
report to be run. When we preformed a search on this key no results were displayed. We need to know what steps we need to take in order to get a report to display correcvtly on the RAS.

I dont know why that registry key doest not exist. That paper also says that you can put a switch on the command line start for the RAS server:
-reportdirectory <filepath>
[ Optional ] The report directory root this RAS instance will use for opening reports. Users will only be able to open reports are contained in <filepath>, or a subdirectory of <filepath>. If unspecified, RAS will default to the value stored in the registry. For Crystal Reports Server Embedded 2008, the registry key is HKLM\SOFTWARE\Business Objects\Suite 12.0\Report Application Server\Instances\<Instance Name>\Server\LocalConnectionMgr\ReportDirectoryPath
Try setting the -reportdirectory on your ras start line.
u201C
theserveritison\C$\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crystalras.exeu201D -reportdirectory C:\reportfolder\
Jason

Crystal Reports Server 2008 trial install - unable to log into CMC

Hi,
I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
Any suggestions?

ok... after research it seems a DSN has not been created.
Also when trying to start the server intelligence service i see the following in the application event viewer:
[Node Name: SCOTTPC]
[User Name: SYSTEM]
Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
i have recreated the bootstrap file but still get the same error.
i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

Error when running a report in Crystal Reports Server 2008

Received the following error message:
Error in File Relatorio4: Failed to load database information.
Or
Error
Failed to open the connection. Relatorio4 Details: [Database Vendor Code:
12154 ]
I'm trying to run a report Crystal Reports 2008 in Crystal Reports Server 2008.
I use the native driver for Oracle (Oracle Server).
Any help would be appreciated!

Hi Vilari,
Do a small test to test your connection.
-Right Click on desktop ->
Create new text document->
Save as test.UDL->
double click and test connection by selecting driver name,datasource name,user id and password.
Click on Test Connection.
It should be succeed.
Database Vendor Code is the error returned by the database client/server.Its not a Crystal Report Error.Check Microsoft's web site for more info on what that error means.
Likely the client has not been in stalled or configured or both.
Also check that proper DSN is configured or not.
As you are using Oracle make sure that a TNSNAMES.ORA file exists and is in the proper place and accessible. See the operating system specific manual for details on the required name and location.
Check to see that the service name exists in one of the TNSNAMES.ORA files and add it if necessary.
Make sure there are no syntax errors anywhere in the file. Particularly look for unmatched parentheses or stray characters. Any error in a TNSNAMES.ORA file makes it unusable.
Hope this helps
Regards,
Shweta

Crystal Report Server 2008 - Schedule/Process/History Grayed Out on CMC

Hi - I'm using Crystal Reports Server 2008 (11.5) and am unable to schedule reports - the schedule (as well as the Process and History) tabs are greyed out in the Central Management Console and don't appear at all in Infoview. In addition I can specify the database when I setup a new report or when using the Publishing Wizard to import files I don't get the dialogue about scheduling.
Am I missing something?
Thanks

Can you please try one of the CRS 2008 keys from the folowing file?
[https://service.sap.com/~sapidb/011000358700000213152009E]
Regards,
Stratos
PS: You can change the license keys in the CMC.

Crystal Reports Server 2008 Installation Error

Good day,
My name is Dominic Hung and I work at Business Objects. One of my clients is coming across an installation error on their evaluation of CRS 2008 and is detailed as follows:
They currently have the actual report writer (Crystal Reports 2008) on a desktop PC. It's not installed on the server.
We have the MySQL ODBC loaded on the local desktop as well as the server that is hosting CR2008 Server.
The credentials (userid/password) used in both the desktop and server's ODBC configuration is READ ONLY.
During the installation wizard for CR2008 Server, I key in the userid & password that I use when we create reports, but I receive an error stating that
CMS database error: STU000226
BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "esc:10.127.214.22:3306". Reason: Database access error. Reason access denied for user 'jdcherry'@'% to database 'esc'
This is where everything stops and they can't go further. They are not sure why they are receiving the "access denied" error as shown above. They have no problem connecting to the MySQL database when they create a report using CR2008, the CR2008 SERVER won't accept my credentials during the installation.
QUESTIONS:
The "jdcherry" UserID (which I use) is READ ONLY on the MySQL database that's hosted on the Linux box. Does the userID have to have higher priviledges than just READ ONLY in order to validate the database credentials?
If so, what level of access is required?
Does the installation of CR Server update any of the tables that are stored on the MySQL database?
Do we need to install the Crystal Reports 2008 on the server in order for Crystal Reports 2008 SERVER to work?
What other workarounds can be done for the client? The windows server they have Crystal Reports Server 2008 installed on has web services enabled but are continuing to come across issues. Any insight for the client would be greatly appreciated.

Does the userID have to have higher priviledges than just READ ONLY in order to validate the database credentials?
The userID used when installing CRS must have dba previleges (create/drop tables) on the schema.
Does the installation of CR Server update any of the tables that are stored on the MySQL database?
You should create a new schema/DSN for the CMS db. The installation of CRS creates 8 new tables.
Do we need to install the Crystal Reports 2008 on the server in order for Crystal Reports 2008 SERVER to work?
No
All this information is in the BOE XI3.0 Installation Guide.

Crystal Reports Server 2008 FP 4.1 Update did not update InfoView/Cmc ?

Hi all,
last year I installed a Crystal Reports Server 2008. After installation I had the following version numbers:
Server = 12.3.0
InfoView/Cmc = 12.1.0
Now I downloaded all packages of service pack 4 and fix pack 4.1 and tried to install them in following order:
Crystal Reports Server 2008 V1 Service Pack 4 for Server Components
Crystal Reports Server 2008 V1 Service Pack 4 for Client Components
Crystal Reports Server 2008 V1 Fix Pack 4.1 for Server Components
Crystal Reports Server 2008 V1 Fix Pack 4.1 for Client Components
The installation of the server components worked fine, however the installation of the client components failed with "Base version mismatch". Now I have these version numbers:
Server = 12.4.1
InfoView/Cmc = 12.1.0
Is that the intended behaviour? Is there no need to update InfoView/Cmc too? I know that InfoView did not work with IE 9 before the update, so I hoped to get an update of it.
Thanks for any info
Joern

Hi Joern,
Don't pay attention to the version that you get from infoview or CMC.
It never changes and will always remain 12.1.0
In order to know your BOE version, you can check it in
CMC > Settings
In the add/remove programs, it lists the version installed
You also have a tool which is software inventory tool which list the version installed.
For clients, if you go in the folder where the .exe is, if you right click on it and select properties then you will get the version number in the version tab
I hope this will help you
Regards,
Philippe

Error when I deploy a report on crystal reports server 2008 V1.

Hi ,
I am getting below error when I deploy a report on crystal reports server 2008 V1. I have installed the crystal server on Linux machine.
"A server communication error occurred. All servers with kind rptappserver could be down or disabled by the administrator. "
Please help.
Thanks,

Hi
use the Universe Designer (designer.exe).
Regards,
Stratos

Crystal report server 2008 v1 connect to oracle error in win 64 bit

Dear Experts,
I have install crystal report server 2008 v1 in windows server 2008 64-bit, oracle client 10g 64 bit. When report connect to database, it 's has an error: Fail to load database information.
I tested on crystal report 2k8 v1 by : Open this report file , and preview, It has an error :
" Fail to load database information. Details: the database connector crdb_oracle.dll could not be loaded. The correct version of the database client for this database type might not be installed".
But, on win XP 32 bit, It's OK.
Could you please tell me how to fix it?
Thanks and Best Regards.
Quan, Ly Thanh - Software Engineer, Information Technology Center- Mekong Housing Bank- Viet Nam
Edited by: Ly Thanh Quan on Jun 21, 2010 9:17 AM

Hi,
first you must uninstall the 64 bit version.
But you can install the 32bit version on a 64bit OS.
When you install the 32bit version please make sure to not install into the "Program Files (x86)" Folder - somethimes i had problems with the "(" ")".
Regards
-Seb.
Edited by: Sebastian Wiefett on Jun 22, 2010 9:29 AM

Crystal Report Server 2008 error

Good afternoon:
Iu2019m having some issues with the Crystal Report Server 2008.
I have reports scheduled that have parameters, when I want to change the parameters is giving me the following error.
Parameters
An error has ocurred: $Proxy7
Also I have the same problem when i try to change the printer settings.
Printer Settings
An error has ocurred: $Proxy4
I need to fix this a ASAP.
Thanks in Advance.
Nancy Rodriguez

http://service.sap.com/support
You have to use a support User ID and password. Talk to your local SAP representative if you do not have a user ID for the support portal.
Regards,
Stratos

Crystal Reports Server 2008 V1, RedHat Enterprise Linux, MySQL, ODBC

Iu2019m confused about connecting to an ODBC source from a report within CMC. Iu2019m a Unix guy; I donu2019t know much about Crystal reports, but Iu2019m working with a Crystal guy to get this thing working.
 
First, background: I have installed Crystal Reports Server 2008 V1 in RedHat Enterprise Linux (5.4), and itu2019s running just fine! Iu2019m using the included Tomcat application server, but Iu2019m storing CMS and Audit data our local running copy of MySQL (5.1.42). The RHEL install is native 32-bit (the only way I could get it to work), Crystal is storing and retrieving data from MySQL, The Central Management Console is responding to port 8080 over Tomcat, Iu2019m able to log in and see stuff, and so far, life is good.
 
Now, where Iu2019m stuck: the data weu2019re trying to build reports from also resides in this local Linux / MySQL install, and connecting to it from a report within CMC is where Iu2019m lost.
 
First, I successfully installed the unixODBC and MyODBC drivers in Linux. Iu2019m able to connect to MySQL successfully using the isql utility. Here are my conf files:
 
<pre class="jive-pre"><code class="jive-code jive-java">/etc/odbc.ini
[DSN_NAME]
Driver = MySQL ODBC 5.1 Driver
DATABASE = project_web_prod
DESCRIPTION = Project Description
UID = username
PWD = password
SOCKET = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib/libmyodbc5.so
UsageCount = 1
</code></pre>
 
Again, this all works with isql (Iu2019ve even used both a socket connection, and port 3306, in odbc.ini).
 
Now, our Crystal guy uploads a report into the CMC. I go to Folders -> <Project Folder>, right-click the report I want to test, click Database Configuration, and check the option Use custom database login information specified here. I select database driver ODBC from the dropdown, and type in the server, database, username, and password info. However, when I try to run the report, it fails to connect.
 
So, stupid question, can Crystalu2019s CMC use the system ODBC configuration options? (The ones stored in /etc). Because I saw an odbc.ini file in ~crystalinstalldir/bobje/. I edited it to match the contents of my /etc/odbc[inst].ini files, but to no avail. I saw that Crystal has itu2019s own ODBC engine, but it doesnu2019t support MyODBC driver, does it? I even tried hacking env.sh to use the system unixODBC library instead of the included one, but no luck.
 
So, in short, my question: how do I simply get reports in CMC to connect to a MySQL data source (using ODBC)?
 
Thanks so much! An answer to this question will save my day!
 

Thank you, Efstratios, for the helpful reply!
So, I followed the directions in the PDF file you attached, and everything went smoothly. However, Iu2019m still not able to connect to ODBC within CMC.
Hereu2019s what I did:
<ul style="list-style-type:disc">
<li>Copied the unixODBC libraries over to <installdir>/bobje/enterprise120/linux_x86/odbc/lib</li>
<li>Removed MySQL ODBC connector 5.1, installed MySQL ODBC connector 3.51.</li>
<li>Edited <installdir>/bobje/defaultodbc.ini, added my DSN and MySQL library info as per the instructions (I have both an odbc.ini, and defaultodbc.ini, identical files, just to be safe)</li>
<li>Tested the connection using these libraries, this odbc.ini, and isql. Worked just fine</li>
</ul>
So, my problem seems to be in getting the CMC to actually use my ODBC setup!
Any other hints / things I could try?
When I right-click a report, and go to “Database Configuration,” which connection options should I use for the report? Iu2019ve tried both “Use original database logon information from the report,” and “Use custom database logon information specified here” (using the ODBC option from the drop-down menu). Either way, if I enter in the database, username, password, and then try to run the report (“Run Now”), I get this message in the History: “Failed - Information is needed before this report can be processed.”
Is there another place I could get a more helpful error message? Or is there, perhaps, another way I could test database connectivity from within CMC? I wish there were at least a “Test Database Connection” optionu2026 :P
Thanks so much for your help!

Please help with my crystal reports server 2008 trial setup

Firstly, if this is in the wrong section feel free to move it. I find this forum is to big to find the information i need, in fact trying to find anything i need on this website is almost impossible. So far not impressed with SAP at all! we download a trial and when we have problems nobody can support us and we have to post in the forums for answers, which i find disgracefull to be honest. So this post is my last attempt of finding the answers to my problems or we are going to forget crystal reports server for good! I was also told that if i wanted help setting this up then i would have to pay, thats not how things usually go when we download a trial of any software!
Anyway, rant over!!
Right, we have windows server 2008 and have installed crystal reports server 2008. So far all i have managed to get working is the reports themselves which run and schedule fine. The dashboard and business views are so confusing i just dont get it at all, the manuals dont help either becuase they are rubbish basically. But my first problem is trying to get windows AD authentication working! easier said than done. I have spent 4 days trying to get it working but nothing is happening. this is what i have done so far
Set up all the options in the CMC to enable AD authentication, mapped a few groups one of which i am a member of.
Then i setup the krb5.ini file like below (removed my server name and domain name)
[libdefaults]
    default_realm = DOMAIN.CO.UK
    dns_lookup_kdc = true
    dns_lookup_realm = true
    udp_preference_limit = 1
[realms]
DOMAIN.CO.UK = {
    kdc = DC.CO.UK
    default_domain = DOMAIN.CO.UK
i also have that other file bscLogin which looks like this...
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
The server inteligence agent has been set to use the same username as i specified in the CMC which is also the service principal name and the administartion name
i have set the web config file to use SecWINAD as default, i have also set it to give the option of enterprise, win ad etc in a drop down list
i have gone round in circles for days following the instructions, and nothing is happening
Also i dont see any usernames within the groups i have mapped , am i supposed to see any? am i supposed to add them manually?? if so, whats the point in that?
So now everytime i try to log in i get this error message
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
There is also another error message i get, which isnt coming up right now but it says somthing along the lines of could not authenticate at this time (FWM 00005)
i fail to see what im doing wrong. I shoudl also point out that the username i am using for everything is our own network admin password!
any ideas on things to check before we give up with this all together?

Hi Roberto,
With the changes when SAP took over BusinessObjects the support packaging also changed. It's the way it is now but we are moving to and giving as much options as we can. SAP works on the Self Serve practice. the info is available but you have to find it, which is another thing we are working on to improve for BOE/CRS.
Best place to start is in the CMS link off the start menu, You'll find the Admin Guide and Setup/Configuration Guides. You can also find all of the latest info and updates to those guides from help.sap.com then click on the SAP BusinessObjects tab along the top and then on the left click on All Products and then filter on your version.
Once the Firewalls and Domains and your CRS Server is added to the Trusted Domains and ports opened to allow CRS to talk to the DNS Server CRS will begin to load all of the users into it's User Mappings. You still have to add each user or Group of Users but they will be available. Documents does describe how to....
Once you have the Admin Guide search on Security and it explains in details how to set up and which ports need to be opened etc.
Thank you
Don

Crystal reports server 2008 VI questions

I aplogixze if I am asking many questions in the same thread. If so please let me know. and I'll create seperate threads.
Questions with Crystal reports server 2008 VI
1. In my current VS2005 web application with CR 2008 developer I have done the following :
a. When the user selects a report it prompts for the database that is needs to connect. User could select Test or Live database
b. I could hide the export button for each report
c. Add the same report twice to the same folder under diffrent report descriptions
Could I do the same with Crystal reports server 2008 VI?
2. I have added a report that connects to the SQL server and also I set up the required ODBC for the report on the server. I could run the report without any issue.
When I add the same report to another folder in CMC or add a new report that uses the same connection, and try to run it, I get the following error.
I did set location and verify database in Crystal designer many times and added the report into CMC, but still it gives me the error.
However the first report that I added still works fine. For some reports it shows the parameter screen and when I enter them and click OK it gives the same error. I checked the logon information and they are correct. Reports work fine in Crystal designer.
error message:
"The database logon information for this report is either incomplete or incorrect"

I assume that you have built your reports with the CR Designer 2008 V1. Try to open the affected report in the CR Designer and select Database->VErify database and save it back into the repository. Does it work?
Regards,
Stratos

Crystal Reports Server 2008 - RAS API ReportAppSession.initialize() fail

Hi,
We have a servlet (running on Websphere 6.1 container) trying to connect to Crystal Reports Server 2008 using RAS Java API to open unmanaged reports.
It fails at the very beginning of ReportAppSession.initialize() with error message:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: HQ-ROSIE03. - Connection refused: connect-- Error code:-2147217387 Error code name:connectServer
HQ-ROSIE03 is the server name hosting CRS 2008. I try to pass in either HQ-ROSIE03 or HQ-ROSIE03:1566 to setReportAppServer(), but no help.
On CRS2008, I checked from Central Management Console that all servers are up and running. I also add "-ipport 1566" to the commandline of ReportApplicationServer from CMC. It does not help either.
Would you please tell me what might cause the problem based on the error code and message? Thank you.
Here is the code.
        try
          ReportAppSession reportAppSession = new ReportAppSession();
          reportAppSession.createService(
          "com.crystaldecisions.sdk.occa.report.application.ReportClientDocument");
          //HQ-ROSIE03 is the server name that hosts Crystal Reports Server 2008.
          //I tried to pass in the port number, i.e "HQ-ROSIE03:1566". But it got the same exception.
          reportAppSession.setReportAppServer("HQ-ROSIE03");
          // This is where the exception is thrown.
          reportAppSession.initialize();
          ReportClientDocument lo_ReportClientDoc = new ReportClientDocument();
          lo_ReportClientDoc.setReportAppServer(reportAppSession.getReportAppServer());
          lo_ReportClientDoc.open(asReportName,OpenReportOptions._openAsReadOnly);
          ReportServerControl control = new ReportServerControl();
          control.setReportSource(lo_ReportClientDoc.getReportSource());
        catch(Exception exc)
            System.out.println( exc);
Edited by: Lijing Lin on Mar 27, 2009 12:39 AM

There is a typo when adding -ipport 1566 to the RAS server command from CMC.
It is now resolved.

Crystal Reports Server 2008 - CMC Login Error - Bad Port Number in CMS Name

Similar Messages

Maybe you are looking for