Crystal reports server 2008 linux version instalation problem

GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRA

Post to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek

Similar Messages

CRYSTAL REPORT SERVER 2008 LINUX VERSION INSTALATION PROBLEM

GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRA

Post to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek

How to get past Crystal Reports Server 2008 Linux install error

Hi,
     During the install of Crystal Reports Server 2008 on Red Hat Linux we select use an existing DB (Oracle) and it prompts for:
Crystal Reports Server 2008 Setup
Enter the information for your new CMS
Oracle TNSNAME :
[SANDBOX                     ] *
User ID :
[crystal_rpt                 ] *
Password :
which then gives me:
Crystal Reports Server 2008 Setup
ERROR
Failure to validate the database credential has a potential to crash the database at a later stage. Enter the correct information.
It doesn't let me get past this and just send me back to the previous screen. I've check and re-checked and the information TNSNAME, User ID, and Password are all correct. Now I can exit out the install and sqlplus to the database just fine with all that same information.
What does this error mean? And how do I get past it?
Thanks,
~Jet

Hi Jet,
I've go the same problem. Have you solved this problem?
Regards,
Aldo

Crystal Report Server 2008 SP1 redistributable printing problems

I'm trying to print from a asp .net form after recently installing the Crystal Report Server 2008 SP1 redistributable.
When I click on the print button it brings up a empty messagebox with 'csprintdlg' in the title in IE7.
My installation on the Windows2003 is slighty different since my Inetpub\wwwroot folder is located on the D: drive.
The previous installer, included the aspnet_client\system_web\2_0_50727\crystalreportviewers12
on the C: drive but this one did not. I copied the folder from another server with just the initial version of the redistributable, everything works except printing.

Using [Fiddler|http://www.fiddlertool.com/fiddler/] on the client web browser machine will give you a clearer idea of what's amiss on the server.
It's a starting point for tracing back to what's missing or being denied on the server.
Following that, [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx] on the server is useful for hunting for missing components or permissions issues.
Sincerely,
Ted Ueda

Crystal Reports Server 2008 (Linux) - Crystal Reports/MySQL/ODBC Issue

Hello,
I have successfully installed CRS '08 on a Red Hat Enterprise Linux 4 server. All services run fine.
In the CMC, I have uploaded a Crystal Report that connect to a remote MySQL server.
I have installed the My SQL ODBC 3.51.11 and .12 Drivers as a System DSN.
I have proven that the reports run fine in Crystal Reports 2008 directly against the remote MySQL DB server.
(in Windows but with the same 3.51 ODBC Drivers)
I have also proven that the database connection works okay from the CRS '08 Red Hat server to the remote MySQL DB server, when also creating a system DSN (using bash ./ODBCConfig)
The problem is that when I log into the CMC or InfoView, and when I run the Crystal Reports from there, I get an error message:
"Error in File <MyCrystalReport>: Failed to load database information"
Is there something wrong with my specific Crystal Reports' Database Configuration? (Right click- Database Configuration)
I see the driver was registered correctly in the /etc/odbc.ini file
Am I supposed to set any other ODBC environment variables?
Is there are firewall issue (port 3306 is already open)?
In summary, the install was successful, and Crystal Reports can be uploaded and viewed via CMC or InfoView, but I cannot run the Crystal Reports against the database.
Please advise, Thanks!

Hi, I'm facing a similar problem. My ODBC DSN never works with CRS. Here are the details: 
(1) I installed the CRS 2008 in /opt/crystalreportsserver_2008_v1/ on a Linux platform. The CRS works well. I created a report with Crystal Reports 2008. This report directly connects to a MySQL server. After I published the report and manually modify its database configuration, I can browse it from InfoView. I'm sure that CRS, MySQL, and a report connecting to MySQL are all good. 
(2) Then, I created an ODBC DSN on a Windows platform. This DSN connects to a MySQL server. I created another report with Crystal Reports using this DSN. The report can show the data within Crystal Reports. 
(3) Then, I published the second report to CRS, but when I try to browse it, I always get such a message: Failed to open the connection. 
I have configured the ODBC for CRS on the Linux server and I think the configuration is correct. This is how I do that: I edited the /opt/crystalreportsserver_2008_v1/bobje/odbc.ini file. In the file I added a data source called ods_telstar. Following is the content of the file: 
[ODBC Data Sources] <
CRSQLServerWP=DataDirect 5.3 SQLServer Wire Protocol Driver 
CRSybaseWP=DataDirect 5.3 Sybase Wire Protocol Driver 
CRText=DataDirect 5.3 Text Driver 
%SYBASEDSN%=DataDirect 5.3 Sybase Wire Protocol Driver 
ods_telstar = MySQL 
 
... 
 
[ods_telstar] 
Description = ODS on telstar 
Trace = Off 
TraceFile = stderr 
Driver = /opt/crystalreportsserver_2008_v1/bobje/enterprise120/linux_x86/odbc/lib/libmyodbc5.so 
SERVER = xxx 
USER = xxx 
PASSWORD = xxx 
PORT = 3306 
DATABASE = ods 
 
In the middle I removed some data source definitions that are by default in the file. Note that I use "xxx" to replace the server name, user, and password. Such information is for internal use and I'm sure the original information is correct. The MySQL ODBC driver file has been put in the correct location. Correct access permissions has been assigned to the file. 
I've tried to restart the CRS server, but still the report using ODBC DSN cannot be viewed. 
The reason that we want to user ODBC DSN is that we may have many reports to publish. When we design the reports, we specify that they get data through an ODBC DSN such as ods_telstar. If we configure the same DSN on CRS, then we don't need manually modify each report's configuration after we publish them. If these reports are directly connecting to MySQL, then we have to manually modify each one's database configuration after we publish them. 
I've no idea what's wrong with all the setup. Any suggestions and comments are appreciated!

Installing Crystal reports server 2008 v1 with iis

Hi All
I have downloaded a trial version of Crystal reports server 2008 v1 to install on our server.
We are runnning server 2003 and have iis version 6.0 installed.
I have run the installation wizard on our test server but when i get to the "Select Web Application Server" screen i am not given the option to select "Deploy the application in WACS" as the documentation suggests i should.
I continued with the installation using the "IIS Web ApplicationServer option" and selected the default iis website to deploy to but when i try to run the CMC and InfoView I just get the message "Internet Explorer cannot display the Webpage"
We have asp.net v1.1 installed and Application server is installed in windows components.
Does anyone have any idea what may be causing my problems. It is my first time install ing CRS so i may have missed something.
Any help would be appreciated.

CRS 2008 requires 2.0 framework to run

Do I need to uninstall Crystal Reports Server 2008?

Hello,
We recently installed Crystal Reports Server 2008 and began migrating reports off the CR Enterprise 9 platform and things were going pretty well.
One of our other locations began moving over their reports that are ran against an Oracle database and cannot get passed a connectivity issue. We found the following:
Oracle connectivity issues
If you are installing Crystal Reports Server 2008 V1 on a 64-bit Windows
platform, Oracle database connectivity issues may occur. If Crystal Reports
Server 2008 V1 is installed to a location that contains brackets in the folder
path, for example, C:\Program Files (x86)\, it will be unable to connect
to an Oracle database. Certain Oracle database clients such as version
10.2.0.2 or 10.1.0.2, may not function properly with any application that
has brackets in its folder path. When installing Crystal Reports Server 2008
V1, select an installation path that does not contain brackets, such as
C:\Program Files x86\ or contact Oracle support for an updated database
client.
We of course have everything installed in the default (x86) folder. My question is, is there a way to move the installation, or do I need to uninstall/re-install? If I need to re-install, is there a way to back-up and reload all of my existing jobs?

Hello,
CR must have the Oracle client installed. Unless you use a Wired Driver, which has the client engine built in, CR requires a client to be installed. It never has worked without the client installed.
Also, I've found that if you have more than one Oracle client installed it causes problems. Make sure the first one in the PATH statement points to the latest version of the client.
And yes you are correct, ODBC is a layer on top of the native client so it will be slower obviously because it has to go through one more layer of dll's to get to the server.
Thanks again
Don

Crystal Reports Server 2008 Trial Installation Problem

I recently downloaded the trial version of Crystal Reports Server 2008 and ran into a problem with the installation key code sent to me. During the install, I enter the keycode and the install application says it is invalid. I'm attempting to install the Linux version on Red Hat Enterprise 5.2. I know that this is technically not a supported version of Linux but I would not expect that cause a problem with the key code.
Does anyone have any ideas on what is happening?
Thanks...

Hi Jeff,
I would suggest you to install Crystal reports on supported platform only.
To narrow down the issue you can try to install on other machine with supported environment so that it would be clear that the issue is with Keycode or not.
Regards,
Shweta

Crystal Reports Server 2008 V1, RedHat Enterprise Linux, MySQL, ODBC

Iu2019m confused about connecting to an ODBC source from a report within CMC. Iu2019m a Unix guy; I donu2019t know much about Crystal reports, but Iu2019m working with a Crystal guy to get this thing working.
 
First, background: I have installed Crystal Reports Server 2008 V1 in RedHat Enterprise Linux (5.4), and itu2019s running just fine! Iu2019m using the included Tomcat application server, but Iu2019m storing CMS and Audit data our local running copy of MySQL (5.1.42). The RHEL install is native 32-bit (the only way I could get it to work), Crystal is storing and retrieving data from MySQL, The Central Management Console is responding to port 8080 over Tomcat, Iu2019m able to log in and see stuff, and so far, life is good.
 
Now, where Iu2019m stuck: the data weu2019re trying to build reports from also resides in this local Linux / MySQL install, and connecting to it from a report within CMC is where Iu2019m lost.
 
First, I successfully installed the unixODBC and MyODBC drivers in Linux. Iu2019m able to connect to MySQL successfully using the isql utility. Here are my conf files:
 
<pre class="jive-pre"><code class="jive-code jive-java">/etc/odbc.ini
[DSN_NAME]
Driver = MySQL ODBC 5.1 Driver
DATABASE = project_web_prod
DESCRIPTION = Project Description
UID = username
PWD = password
SOCKET = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib/libmyodbc5.so
UsageCount = 1
</code></pre>
 
Again, this all works with isql (Iu2019ve even used both a socket connection, and port 3306, in odbc.ini).
 
Now, our Crystal guy uploads a report into the CMC. I go to Folders -> <Project Folder>, right-click the report I want to test, click Database Configuration, and check the option Use custom database login information specified here. I select database driver ODBC from the dropdown, and type in the server, database, username, and password info. However, when I try to run the report, it fails to connect.
 
So, stupid question, can Crystalu2019s CMC use the system ODBC configuration options? (The ones stored in /etc). Because I saw an odbc.ini file in ~crystalinstalldir/bobje/. I edited it to match the contents of my /etc/odbc[inst].ini files, but to no avail. I saw that Crystal has itu2019s own ODBC engine, but it doesnu2019t support MyODBC driver, does it? I even tried hacking env.sh to use the system unixODBC library instead of the included one, but no luck.
 
So, in short, my question: how do I simply get reports in CMC to connect to a MySQL data source (using ODBC)?
 
Thanks so much! An answer to this question will save my day!
 

Thank you, Efstratios, for the helpful reply!
So, I followed the directions in the PDF file you attached, and everything went smoothly. However, Iu2019m still not able to connect to ODBC within CMC.
Hereu2019s what I did:
<ul style="list-style-type:disc">
<li>Copied the unixODBC libraries over to <installdir>/bobje/enterprise120/linux_x86/odbc/lib</li>
<li>Removed MySQL ODBC connector 5.1, installed MySQL ODBC connector 3.51.</li>
<li>Edited <installdir>/bobje/defaultodbc.ini, added my DSN and MySQL library info as per the instructions (I have both an odbc.ini, and defaultodbc.ini, identical files, just to be safe)</li>
<li>Tested the connection using these libraries, this odbc.ini, and isql. Worked just fine</li>
</ul>
So, my problem seems to be in getting the CMC to actually use my ODBC setup!
Any other hints / things I could try?
When I right-click a report, and go to “Database Configuration,” which connection options should I use for the report? Iu2019ve tried both “Use original database logon information from the report,” and “Use custom database logon information specified here” (using the ODBC option from the drop-down menu). Either way, if I enter in the database, username, password, and then try to run the report (“Run Now”), I get this message in the History: “Failed - Information is needed before this report can be processed.”
Is there another place I could get a more helpful error message? Or is there, perhaps, another way I could test database connectivity from within CMC? I wish there were at least a “Test Database Connection” optionu2026 :P
Thanks so much for your help!

I installed Crystal Reports server 2008, i'm geting server not started erro

Hi,
I'm getting error with server not started or not available error (FWM 01003). If i check in CCM, i don't see any entry for CMS server entry. How to start CMS server??? Please advise me. i installed trail version of crystal reports server 2008.
thanks in advance!!!
Ben.

I am a consultant for Business Object products and experienced the same exact problem. We were installing Business Objects Edge, which is similar to Crystal Reports Server 2008, with MS SQL Server 2000 SP4 for the CMS System Database on a server that was named <Numbers>-<Letters>.
We discovered that some scripts that the installation and CMS run fail when the Server Name of the Business Objects Edge Server start with a number. When the CMS System Database is setup, a table called CMS_IdNumbers6 is created. It should have three columns, NameId, IdName and third column that is named after the server where you are installing Crystal Reports Server 2008, Business Objects Edge or Business Objects Enterprise. This column is called <ServerName>_iad_intensive_int_6400.
This column fails to get created when your server name starts with a number and subsequent scripts that insert records into this column fail. Renaming the server where we were installing Business Objects Edge to <Letters><Numbers> (no dashes either to be safe) solved the problem. We were successfully able to install Business Objects Edge. Please note: This is the server where you are installing Crystal Reports Server 2008 that needs to be renamed and NOT the MS SQL Server--just making a note because we had to go back and forth with our server team a couple of times on this point.

Crystal Report Server 2008 and Linux

Hi,
Does Crystal Report Server 2008 work on Red Hat Enterprise Linux 5 Server and supports 64-bit platform?
Thanks.

Hello Samer,
Supported Operating Systems
u2022 Red Hat Linux Enterprise Server 4
u2022 Red Hat Linux Advanced Server 4
u2022 SuSE Linux Enterprise Server 9 SP3
u2022 SuSE Linux Enterprise Server 10
Crystal Reports Server 2008 software is supported running on 32-bit versions of Windows running on x86 and x64 CPUs made by AMD and Intel.
Crystal Reports Server 2008 software is supported running on 64-bit versions of Windows running on x64 CPUs made by AMD and Intel.
[Please see supported platforms for Linux|https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202]
Best regards
Falk
Edited by: Falk Liebezeit on Aug 21, 2008 1:01 PM

Crystal Reports Server 2008 trial install - unable to log into CMC

Hi,
I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
Any suggestions?

ok... after research it seems a DSN has not been created.
Also when trying to start the server intelligence service i see the following in the application event viewer:
[Node Name: SCOTTPC]
[User Name: SYSTEM]
Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
i have recreated the bootstrap file but still get the same error.
i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

Problems with parameter button in Crystal Report Server 2008

Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
Ketya

Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

Cannot install Crystal Reports Server 2008 and Client Tools on same machine

I am having trouble setting up Crystal Reports Server 2008 with Client Tools on a new Windows 2003 SP 2 machine. The Server 2008 package installs OK (built-in MySQL server, built-in Tomcat 5.5 server). Reports run okay. But my customer wants to run reports that use Salesforce as a data source, so I tried to install Crystal Reports Server 2008 Client Tools (needed for Salesforce support, apparently). I receive this error:
'Business Objects product detected: cannot continue with install'. Installation of Client Tools immediately terminates.
Oddly enough, when I uninstalled Server 2008, the Client Tools installed successfully. Then I tried installing Server 2008, and I got the same error message as with Server 2008. What the heck?
Any ideas on how I can get Server 2008 and Server 2008 Client Tools to live in harmony on the same machine? We were able to do this with a (otherwise overloaded) Win2K3 server before.
Thank you in advance for any help.

Typically the client tools are installed with enterprise by default. If not then you would want to use add/remove in control panel and select them. The installer thinks you are trying to install enterprise on top of itself and thus the error.
Regards,
Tim

Please help with my crystal reports server 2008 trial setup

Firstly, if this is in the wrong section feel free to move it. I find this forum is to big to find the information i need, in fact trying to find anything i need on this website is almost impossible. So far not impressed with SAP at all! we download a trial and when we have problems nobody can support us and we have to post in the forums for answers, which i find disgracefull to be honest. So this post is my last attempt of finding the answers to my problems or we are going to forget crystal reports server for good! I was also told that if i wanted help setting this up then i would have to pay, thats not how things usually go when we download a trial of any software!
Anyway, rant over!!
Right, we have windows server 2008 and have installed crystal reports server 2008. So far all i have managed to get working is the reports themselves which run and schedule fine. The dashboard and business views are so confusing i just dont get it at all, the manuals dont help either becuase they are rubbish basically. But my first problem is trying to get windows AD authentication working! easier said than done. I have spent 4 days trying to get it working but nothing is happening. this is what i have done so far
Set up all the options in the CMC to enable AD authentication, mapped a few groups one of which i am a member of.
Then i setup the krb5.ini file like below (removed my server name and domain name)
[libdefaults]
    default_realm = DOMAIN.CO.UK
    dns_lookup_kdc = true
    dns_lookup_realm = true
    udp_preference_limit = 1
[realms]
DOMAIN.CO.UK = {
    kdc = DC.CO.UK
    default_domain = DOMAIN.CO.UK
i also have that other file bscLogin which looks like this...
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
The server inteligence agent has been set to use the same username as i specified in the CMC which is also the service principal name and the administartion name
i have set the web config file to use SecWINAD as default, i have also set it to give the option of enterprise, win ad etc in a drop down list
i have gone round in circles for days following the instructions, and nothing is happening
Also i dont see any usernames within the groups i have mapped , am i supposed to see any? am i supposed to add them manually?? if so, whats the point in that?
So now everytime i try to log in i get this error message
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
There is also another error message i get, which isnt coming up right now but it says somthing along the lines of could not authenticate at this time (FWM 00005)
i fail to see what im doing wrong. I shoudl also point out that the username i am using for everything is our own network admin password!
any ideas on things to check before we give up with this all together?

Hi Roberto,
With the changes when SAP took over BusinessObjects the support packaging also changed. It's the way it is now but we are moving to and giving as much options as we can. SAP works on the Self Serve practice. the info is available but you have to find it, which is another thing we are working on to improve for BOE/CRS.
Best place to start is in the CMS link off the start menu, You'll find the Admin Guide and Setup/Configuration Guides. You can also find all of the latest info and updates to those guides from help.sap.com then click on the SAP BusinessObjects tab along the top and then on the left click on All Products and then filter on your version.
Once the Firewalls and Domains and your CRS Server is added to the Trusted Domains and ports opened to allow CRS to talk to the DNS Server CRS will begin to load all of the users into it's User Mappings. You still have to add each user or Group of Users but they will be available. Documents does describe how to....
Once you have the Admin Guide search on Security and it explains in details how to set up and which ports need to be opened etc.
Thank you
Don

Crystal reports server 2008 linux version instalation problem

Similar Messages

Maybe you are looking for