Crystal Reports Supported on Windows Server 2008?

Right now, we have it running on Server 2000, but server is being replaced. Would like to go with Windows Server 2008, but, making sure application compatibility first. I have searched the internets, have even called, and cannot get a straight answer.
What Windows OS does Crystal Reports support? And by support, I mean "work without glitches".

Well, there's both gated and ungated content, but Crystal Reports, Crystal Reports Server and Crystal Xcelsius should all have ungated equivalents.
It's just that not everyone on this side of the web browser has got the message. 
I do regret this.
The CR2008SP1 supported platforms (ungated) is found here:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0d494c2-696b-2b10-e8b5-e7083c7be019]
Windows 2003 is supported, and Windows 2008 is supported starting with SP1. 
Sincerely,
Ted Ueda

Similar Messages

  • Librfc32 support on Windows server 2008

    Hi,
    We at Trango Software (division of Siemens Enterprise Networks) are currently using the SAP Remote Function Call runtime as a part of our product (librfc32.dll, File Version 6403.3.55.4580). We will be supporting Windows Server 2008 platform from our product's next release. We are assessing compatibility on Windows Server 2008 platform of all the third-party libraries and tools that are part of our product.
    We would like to know if the SAP remote function call runtime dll (librfc32.dll) is currently supported with Windows Server 2008. If not, we would like to know when (tentatively) it is expected to be supported.
    Thanks a lot for your help.

    Hello,
    have you configured the accounts to have the permission "Log on as a service"? I have seen that this is not given to the account and therefore the service fails to start.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Microsoft support for Windows Server 2008 R2 on vSphere 5.5

    Hi, everybody.
    I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
    http://windowsservercatalog.com is:
    Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
    http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
    http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
    Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
    http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
    http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
    Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
    I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
    Thanks

    Hi mdgrkb,
    Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
    Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
    Look this website the top left additional information:
    http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Crystal Reports XI - Installation on Server 2008 r2

    I have moved an installation of of Crystal reports from our Windows 2000 machine onto our Server 2008 R2 machine (x64) and am having difficulties getting the program to work. It installs fine, I choose a custom install and selected all components to be installed, yet when I run it I get an error saying "Crystal Reports has stopped responding"
    Is there anything I need to do to get it working in this environment?
    My product is:
    Msi=win32\CrystalReports.msi
    ProductName=Crystal Reports XI
    MsiMajorVersion=2
    MsiMinorVersion=0
    MsiBuildNumber=2600
    TempFilePrefix=CRInstall_
    ProductCode={**************************}
    Thanks
    Jason

    See this thread for a possible solution: Crystal Reports XI  stopped working error message on a Windows Server 2008
    Try using the setup.exe and no the msi to install with.

  • Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

    Hi,
    Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
    Rock
    Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

    Thanks all for your replys.
    As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
    Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
    ' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
    When will be 64 bit runtimes for CR 08 will be available?
    Thanks

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • Anyconnect v3.0 support on Window server 2008 NPS

    Hi Forumers'
    Just wnat to check out, does the non-microsoft based OS client OS (Example: MacOS, ubuntu, Andriod) supoprt anyconnect v3.0
    And also if my RADIUS server is host using window server 2008 Network Policy Server (NPS) component, can this doing the 802.1X ahtneticating?
    thanks
    Noel

    Hi Noel,
    You can check the system requirements for Anyconnect 3.0 in the release notes for support on non Microsoft OS:
    http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/anyconnect30rn.html#wp1263243
    For 802.1x with NPS. the following link might help you. before that let me tell you, i have never tried this. I was just searching for something and i bumped into this one.
    http://technet.microsoft.com/en-us/library/dd283087%28WS.10%29.aspx
    Hope this helps.
    Regards,
    Anisha
    P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

  • Hp deskjet 2545 printer driver not supporting on windows server 2008 r2

    I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2.  but I have checked in my office and it is working fine on my office 2008 server. Please help.

    Hello Arvindk,
    Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/ 
    I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Adobe Air 3.6 - Support for Windows Server 2008 R2?

    Hello all,
    Adobe lists "Windows Server 2008" in the list of supported operating systems.
    We tested our application on a Win 2008 R2 terminal server and could'nt find any issues so far. Is there a reason why Adobe does not list "Windows Server 2008 R2" (64 Bit) in the supported platforms list?
    Thanks in advance!

    Hello Tobias
    please have a look at the SAP note
    [66971|https://service.sap.com/sap/support/notes/66971]
    Win 2008 Server R2 is not released for Sapgui 710 !
    Only Sapgui 720 is released for this Windows OS!
    Also please note the Sapgui 710 is supported until the 12. of April 2011 !
    Please see note [147519|https://service.sap.com/sap/support/notes/147519] !
    Best Regards
    Sven

  • Crystal Reports 9 - Installation on Server 2008

    Hi,
    I have moved our installation of Crystal 9 from server 2000 on to a Server 2008 x64 r2 and am having a few little issues:
    The program has installed and ran correctly, but when it goes to open a file it comes up saying:
    'Failed to open the documents'
    'ufmanager.dll is not found'
    Then the program just sits there and doesn't open the file.
    Does anyone know what we can do?

    Hello,
    Is this an application you wrote or are you just installing CR 9 Designer on the Server? CR 9 had no concept of 64 bit OS's so it's likely a 32 bit dependency missing that the ufmanager.dll is looking for.
    If it is an application then make sure you build it for 32 bit mode only.
    You could try using Process Monitor from www.sysinternals.com and see what it's looking for.
    CR 9 ended it's supported life cycle a long time ago so Windows 2008 has never been tested nor will it be.
    You may want to search in the Crystal Reports Developer forums on 64 bit, lots of info on how to and may solve your issue.
    Good luck
    Don

  • Crystal Reports 9 and Windows Server 2003 sp1/sp2

    Post Author: jnribeyrol
    CA Forum: General
    Hello,
    due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
    I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
    Can somebody help me.
    regards

    CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
    Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
    Thank you
    Don

  • Crystal Report Error in Windows Server 2012 - Load Report Failed

    Badly needed help regarding the above topic. Thanks in advance for helping.
    We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
    - Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
    - We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
    - Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
    - Installed Service Pack 8 for CrystalReport but to no avail.
    Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.

    Hi Jesse,
    Use a try/catch block and see if this gives you more info:
    catch (Exception ex)
        MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
    Response.write of course...
    Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
    Fiddler may give you more details also
    Don

  • Is LiveCycle ES 9.0 supported on Windows Server 2008 32 bit

    Is LiveCycle ES only supported on 64 bit environments or can we run 32 bit?
    Thanks!
    Noam

    Hi Noam,
    Please have a look at the supported platforms @ http://help.adobe.com/en_US/LiveCycle/9.5/supported_platforms.html
    Thanks,
    Hina

  • Crystal Reports & Windows Server 2008

    Hi everybody,
    I installed Crystal Reports 10 under Windows Server 2008 R2 (x86-64). I need this u201Coldu201D version because I still have some .NET application developed with Framework 1.1.
    Unfortunately, I receive the following error: u201CSystem.NullReferenceException: Object reference not set to an instance of an object.u201D
    I created a virtual directory (which point to C:\Program Files (x86)\Common Files\Crystal Decisions\2.5\crystalreportviewers10) and enabled 32-Bit Applications in the Application Pool under IIS 7.
    Please notice that with the same configuration, everything works fine under Windows Server 2003.
    I eventually tried to install Crystal Reports 2008, but nothing changed.
    Did I miss something?
    Any suggestion is appreciated.
    Thanks in advance for your support,
    Best regards

    Hi Don,
    sorry for my late reply.
    Unfortunately I don't use Visual Studio. I developed my .NET applications with Borland Developer Studio 2006, which support Framework 1.1 only.
    I tried to install the SP3 of Crystal Reports 2008, but no luck.
    I have licensed copies both of Crystal Reports 10 and 2008.
    Thank you
    P.S. if I use the new version (CR 2008 SP3) of:
    CrystalDecisions.CrystalReports.Engine.dll
    CrystalDecisions.ReportSource.dll
    CrystalDecisions.Shared
    CrystalDecisions.Web
    I get the following error:
    "The base class includes the field 'crystalReportViewer1', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)."
    Edited by: abarone on Mar 28, 2011 12:52 PM

  • Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

    Hi Forum,
    I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
    The application does not run and throws the following error in the event log.
    Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
    The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
    Please suggest me if i am missing something. Please let me know how can i debug this issue?

    Hello,
    Crystal reports XIR2 is not supported on Windows server 2008.
    Check the supporting platforms guide here.
    [Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
    Thanks,
    Bhushan.

Maybe you are looking for

  • How do I include a dreamweaver font into a Web site?

    Hello, I have chosen the font-family 'Stencil' within Dreamweaver whilst building a Web site. How can I ensure that this font-family is uploaded to the actual Web site so that the text which I want to display in that font is available to all browsers

  • NameNotFoundException EJB 3.0 Stateless Session Bean

    Hi i am new to ejb 3.0 as well as ejb actually. I encountered an error trying out a small stateless session bean application. 23:15:02,312 ERROR [STDERR] javax.naming.NameNotFoundException: com.afis.ct.ri.session.ejb.ReportIncidentSession not bound 2

  • How To Unzip files from Compress Zip Archive Folder?

    Hi Friends, I had compressed my docx files or images files in zip folder last month but unfortunately that folder has corrupted or damaged due to malware infections. But I am not sure about that what reason behind of zip file get corrupt and inaccess

  • Payment to Foreign Vendor

    Hi Experts, Can some body shed light on this.. Can we run the payment program for foreign vendors in their currency.. if soo what r the settings needed. thanks in advance, siva reddy s.

  • IsNumeric for String?

    I was just wondering how to check whether e.g. a value in a textField is numeric or not. isNumeric seems to take char as a parameter, but what if you are using strings? Should it be converted to a char array or what? The main problem is that if I tak