Crystal Reports-Universe and Business Views. Pros & cons. BVs to Universe

Hi Gurus,
We have around 500 + Crystal Reports developed on top of Business Views, Stored Procedures, Command Objects and some directly connected to the tables. No Universes are there in our current environment and all reports undergo frequent changes.
We are planning to replace Business Views with Universe and use them as data provider for existing Crystal Reports and also planning to do some ad-hoc reporting using Web-Intelligence. I have expertise in developing both Crystal Reports and Web Intelligence reports. But I never designed any complex Crystal Reports against Universe / Business Views. I heard that there are several issues with Crystal against Universe (e.g.: Cascading Prompts, LOVs, Row Level Security etc...) Most of our Crystal Reports have several sub-reports and some dynamic cascading parameters.
We currently have not finalized any tool. Some are advising not to disturb the current environment and some say migrating to Universe is a good option because Business View manager tool is going to be trashed in few years. My personal view is to used both Crystal and Web-I and replace Business Views with Universe because we can use it for both Crystal and Web-I.
Can you please post your views on this?
Also, please post the issues (& solutions) you got with Crystal Reports against Universe. Also advantages and disadvantages of using Universe over Business Views.
Environment: Business Objects XI R2 and Crystal Reports XI R2
Any help is greatly appreciated!
Many thanks,
Shamanth.

Hello,
you can find an article about Crystal Reports on Universe here:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/20984c2b-17f1-2b10-1091-d18977f7cd8f
As you said, an important item to consider is reusability: if you want to reuse your work between Crystal and WebI then you have to go with Universes. If you are ok in keeping the two in separate worlds then Business Views can still bring a lot of value to CR. Business views will stay in the market still for a long time (in mainteinance, so don't expect new features).
Looking at the future, we expect that In the long term, business views will be replaced by universes. Keeping this in mind, a migration of a report from an 'older' version of a universe to a new one will probably go smoother than a migration from a business view to a universe.
Hope that it helps
PPaolo
Edited by: Pierpaolo Vezzosi on Jan 5, 2010 11:35 AM

Similar Messages

How to Convert Crystal Enterprise v10.0 Business Views to BOE XI?

Hi,
It took a long time, but my company FINALLY upgraded from Crystal Enterpise and Crystal Reports v10.0. We just purchased BusinessObjects Edge XI and Crystal Reports 2011. I went to the training class a few months ago, but due to the delay in our actually getting the applications, I feel as though I've forgotten most of what I was taught!
With the old version, we built all our reports off Business Views (using Business View Manager - which was an add-on component of Crystal Enterprise) that are sourced from an Oracle database. I have over 420 report files that are built against these business views.
I have tried to open a report in Crystal Reports 2011, and I'm prompted to log in to BusinessObjects Enterprise to load the business view. When I enter the credentials for the NEW system that I just installed (a brand new install on a new server), I get an error "Access Denied: You cannot log into an older version of the CMS." So obviously the stored business views that are trying to load have the old system information associated with them. Understandable.
I cannot find Business View Manager in the new BOE XI. Is it an add-on? Where can I get it? Can I even convert my old business views? If not, am I going to have to rebuild all my data sources?
I don't know what a "Universe" is - and I've never used them - but is that similar to a Business View?
The problem I get is that if I try to associate a new data source (I tried direct Oracle connection), all the fields in my report disappear when the old (unloadable) business view is removed. Essentially this would require me to rebuild all my reports!
I'm not sure what to do here. I have 420+ reports to convert so we can load them on this new server, and I have only about 2 weeks to do it. If I have to rebuild them all, there is no way I can complete this in time for our cutover.
ANY HELP WOULD BE GREATLY APPRECIATED!! (I'm new to this "forum" thing, too - so if I'm not doing this right or if there is some other place I should be putting this, please let me know)
Thanks,
Amber Smith

Hi Amber,
Thank you for the reply.
Well if you can logon to Business Objects Server then you can see the Business View Manager from Start menu-> All Programs-> Business Objects Enterprise XI 3.1-> Business View Manager
or else you can look for business view manager executable file in c:\program files\business objects\business objects enterprise 12.0\win32_x86\CrystalBVM.exe
When you open Crystal reports, there is an option to change the datasource of an existing report to any other datasource. The only condition that should be met is that the structure of new datasource should be similar to the existing one.
I have not changed the business view datasource to universe, but i will try it and let you know.
Thanks,
Kuldeep G

Error while 'Crystal Report for Sap Business One' addon started

Hi,
I have try to install Crystal Report for Sap Business One (Addon Versione number 2.0.0.7).
The installatione finish succesfully, but when I started the addOn i retrieve this errore message: External Connection to the dataBase failed. Sap Crystal Addon may not function properly. Please re-run the account setup with superuser login.
I'm logged in Sap with manager (super user), so maybe I have forgot some step in the installation?
I have see the Demo in the Channel Partner Portal, I have note that I have to isntall the CR_Runtime_12_0, but I don't find it, I don't know where I can download this file. I have just installed SapCrystalSetup.exe and registered the Addon like a normal Sap B1 addon.
Where is the error??
Regards
Marco

You must configure in each cliente Pc the connection with the DATABASE.
You must Know the Database Super User (In SQL Server usually sa, and its password, the standard form SAP Business One is SAPB1Admin)
In Administration > Crystal Reports Administration > Account Setup
The CR_Runtime_12_0 is only necesary to view reports, but isn't necesary to start de addon.

Crystal Reports published on Business Objects Enterprise Server

Hi all,
I am having a few difficulties after i save my crystal report to the Business Objects Enterprise Server XI 3.1.
1) for the reports with static parameters the "Crystal Reports Print Control" doesbnot work. It gets stuck and i guess cannot load the print function. Don't know what exactly causes it but i made two similar one field reports and saved them to the server. One with a dynamic parameter and the other with a static parameter.
The report with static parameter could not be printed.
This happens when i use the HTML viewer for crystal reports. I cannot use the activeX or Java viewers as they mess up the formatting of my Arabic reports.
2) For some reports i get one type of parameter screen (like we get while running through the designer) while for other reports i get a different type of Parameter Entry Screen. Sometimes when i view the report first time i get the former type of parameter screen and when i refresh the report i get the later screen.
3) Also my dynamic parameters are not showing all the values when the reports are saved to the above mentioned server. On my desktop i made the LOV registry tweak and it works fine. I did the same tweak on server registry but it is not working.
Thanks a lot even if u read it

Moved to BOE forum

Crystal report 11 and IIS

Post Author: lijolawrance
CA Forum: Exporting
Hi to all
We are using crystal report 8.5 for my application till now. The reports are viewed online using IIS and report viewer. Due to some technical infeasibility, we have planned to switch to crystal report 11. Can anyone tell me that how can i migrate to this using the IIS. I want to open my report online like (http:
localhost:8099\report.rpt user earlier)./can anyone help me in that

Post Author: iamtgo3
CA Forum: Data Connectivity and SQL
I just purchased Crystal Reports 2008 and it still does not seem to recognize access 2007 *.accdb files. So I have same answer as above will there be a patch or upgrade of some sort to make Crystal Reports recognize Access 2007 *.accdb files.

Crystal report for sap business one problem

Hi experts,
I am facing problem while dealing with crystal report 2011.
I installed sap b1 8.8 pl 10, then upgraded to pl 20. Now again upgraded to 9.0 pl08. Then i installed SAP Crystal Report for SAP Business One 2011.
I seems that it is not integrated to SAP Business One, because i am not able to save my crystal layouts in sap business one.
How can i resolve this issue, please let me know if anyone faced same kind of problem and got solution for that.
Thanks

Hi
1758302 - Error while connecting to Crystal
1397692 - Error when starting Crystal Reports software
Thanks
Mohammad Imran

Error while importing external Crystal report in SAP Business One

Hi Experts,
while importing External crystal report in SAP Business one i was unable to import the report and it is not displaying any error message or success Message but after completion if i click on the report i am getting an Error as
No Matching Records Found 'Queries' (OUQR) (ODBC-2028) Message[131-183]

Hi,
Please refer SAP note:
1532509 - Cannot import Crystal Report template into SAP Business One
Thanks & Regards,
Nagarajan

Problem while importing a Crystal Report in SAP Business One

Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul Singh

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

Converting crystal reports 10 to Business Objects XI reports

Hi All I am very new to Business Objects XI R2, I have two doubts if any one knows please give reply to me so that it will be helpful for me.First is :Now I am working for a project called Converting Reports which was created by Crystal Reports 10 TO Business Objects XI reports.Is there any specific way for converting .rpt(Crystal Reports) to .rep (Business Objects) or I have to recreate in Business Objects XI. and Second is: Is it possible, Scheduling BO XI report in java based interface, I heard that it is possible but I don't know how?Please give me, How it is possible? Waiting for replyThanks in Advance 

you will need access to the CMS DB and FRS from CE10 in order to migrate to XI 3.x, typically this is accomplished via network. If you can restore them to the same computer a side by side (install CE10 and XI 3.x on the same server) may work as well.
Regards,
Tim

Unable to save reports to enterprise from Crystal Reports 2013 and Crystal Reports for Enterprise

Dear Expert,
when we tried to save report to enterprise, error happened:
"Failed to find a Report Application Server."
We closed BO server firewall.
We could check report from PC by browser.
But when we save report from CR 2013, then error happened.
Then we install CR enterprise and save report is ok from same PC.
We launch latest patches too.
Anyone see this before? Please kindly help~
Environment:
SAP Crystal Reports 2013
SAP Business Intelligence 4.0
Regards,
April.

April, since you have CR4E, you also have BI and thus free phone support included. My suggestion would be to create a phone incident and work with an SAP engineer on the issue. Only saying because it looks like you're somewhat anxious to get this going(?).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Not able to install crystal reporter in SAP Business One PL 42

Hi All,
I had been using the evaluation version of crystal reports. Now when the free licensed version was launched I uninstalled the version and tried to instal the new one which I have downloaded from the portal. I have uninstalled the crystal reports runtime and the SAP crystal reports from the control panel. Now in the same process as mentioned I am installing the crystal reports again. In the ADD-ON istallation part when I am click on start the system shows the following error-
"An earlier version of crystal reports is found. Please ensure that the current installation is a higher version."
Inspite of the fact that my system showed no instance of crystal reports installed after the uninstall run by me.
Please guide me.
Edited by: debraj bhattacharyya on Nov 3, 2008 6:05 AM

The following is the Instructions Extract from "SAP_CRYSTAL_InstallInstructions.pdf":
Un-installation of previous version:
If a previous version of the Add-on exists , it is highly recommended the previous add-on be fully uninstalled before installing the new version. To uninstall the add-on, follow the 3 simple steps below.
1. Using SAP Business One Administration | Add-Ons | Add-On Administration: remove and un-register the add-on.
2. Log off SAP and Log back in for the un-installers to run.
3. Using Windows Control Panel | Add-Remove programs: uninstall the u201CSAP Business One Crystal Reportsu201D ( Do not un-install Crystal Run time )
Installation of New Version:
1.The Add-On runs using the compatibility licence of SAP Business One.
2.Copy the installation files to a suitable location.
3.The installation disk or folder will contain a file called SAPCrystalSetup.exe.
4.Log on to the target PC as an administrator or admin type user (windows).
5.Copy the SAPCrystalSetup.exe to a convenient location on the target PC and run SAPCrystalSetup.exe (confirm all overwrites - you may keep the CrystalDesignerPath.txt intact if the path specified is different to the defaults).
6.SAPCrystalSetup.exe will install the add-on components on the local PC. It is recommended that you keep the path selected by the installer. The default installation path for the Add-on files are C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR.
7.Locate the folder u201CDotNetFramework_3.5u201D , make sure the PC is connected to the internet and run the u201CdotNetFx35setup.exe u201C. An automatic download will occur, to get the suitable files for .Net Framework 3.5. This will take several minutes depending on the bandwidth. The installation of the .Net Framework will happen once the download finishes.
8.Locate the folder u201CCrystal_2008_Runtime_exeu201D and run the u201CCRRuntime_12_0_mlb.exeu201D. if a product ID is requested, leave the Text Box blank and proceed with install. This installs the Crystal Reports Runtime for Version 2008 on the local PC.
9.Once the setup.exe has completed, log on to SAP as manager or any other superuser.
10.Using Administration | Addons | Add-On Administration, register the Crystal Add-On, set the desired settings and restart SAP.
11.Log on to SAP, as a super user.
12.Run Account setup from Administration | Crystal Reports Administration | Account setup
13.Type in the sa password for the SQL server that holds SAP databases, and click Update. ( this process needs to be performed for each new PC, Once. )
14.Click the Create Ext tables button. Add-on will now create the additional tables (this process must be performed for each new SAP company once u2013 and can be performed from ANY PC). This creates the External SQL tables needed for the add-on.
15.THE TASKS 5, 6, 7, 8, 9, 12, 17 WILL NEED TO BE RUN ON ALL PCS THAT NEEDS THE CRSYTAL ADD-ON.
16.Crystal add-on is ready to use. A help file is provided and you may test the add-on with the sample reports found in u2026\ SAP_CR\SampleReports. The help file can be found in u2026\SAP_CR\Documents\UserHelpFile
17.If the Crystal Designer has been installed on the local PC, the following file needs to be edited ( or checked to be correct). The file gives the path to the Crystal Reports Designer exe. The add-on will read this file to launch Crystal Designer.
C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR\Resources\CrystalDesignerPath.txt

Crystal Reports 11 and 8.5 Compatibility

Post Author: mcneillb
CA Forum: Deployment
Can an application running Crystal Reports 11 and a legacy application running Crystal Reports 8.5 co-exist on the same system? The legacy application is a vb6 app and just uses the crystal report viewer. If they canu2019t what needs to be fixed or otherwise changed?
It appears if the legacy app is installed last, then the Crystal Reports 11 application is broken (its report viewer doesnu2019t work).
ThanksBlake

Hello Javier,
There isn't going to be much, if any, DLL files that are compatable with both. When version 9 was made it was redesigned from the ground up to be Unicode compliant. When this was done all DLL files that worked with the old versions would not work with the new versions.
-Sean

Oracle8i with Crystal Report 8 and ASP

Hai there
am new to Oracle8i.
am using Crystal Report 8 and 8.5, Windows NT, IIS, Oracle8i.
i created a simple query report in Crystal report 8 and coded a
asp todisplay at client browser but i cant view the report.
the CRviewer controle is displayed but no report
error:
Server has not yet been opened.
please help me
thanking you
raj

CR was released well before .NET framework 3.5. Mo test would have been done. Only option is to not install 3.5 or upgrade to CR 2008 which supports 3.5 framework. Also will require you to update your app to ASP.NET.

Crystal Reports 9 and SQL Server 2005 default parameter values

We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
For example, if you have a stored procedure that begins like this:
ALTER Procedure [dbo].[StoredProcedure]
@Param1 VarChar(200) = '',
@Param2 VarChar(200) = ''
AS ...
both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
This was never a problem with SQL 2000.
Very perplexing. Anyone else every experience this?
Thank you.

Please ignore my earlier post -- answered my own question.
NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

Query Engine report error with Crystal Report 9 And MS SQL SErver 2000

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...
Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
select ''
--or
select 0
--or
select null
Regards, RSingh

Crystal Reports-Universe and Business Views. Pros & cons. BVs to Universe

Similar Messages

Maybe you are looking for