Crystal Reports Utilization for Last 90 Days

I am trying to use Query Builder to determine which crystal reports have been runned within the last 90 days. Is this possible? If yes how?

Hi Garet,
As Manikandan Elumalai mentioned, this information can be fetched if you have Auditing enabled and configured to capture events specific to accessing reports.
If you are on BO 4.0 platform, you can check in CMC whether auditing is enabled or not. If it is enabled, you can deploy the auditing universe and reports from here.
Cheers
Mohan

Similar Messages

Average for last 7 days

I am trying to calculate Deviation Measure for the Reports and the formula to calculate is –
(average(last 7 days count ) – today’s count/100 )*10
Problem here is to calculate average for last 7 days .
I am using moving average but if I apply a filter , Moving average is calculated for the number of rows displayed whereas I want it for the number of days.
Formula for Moving average is - MAVG(Row Count,n) where n is number of rows displayed and not number of days. Is there any possible way to do it.

(average(last 7 days count ) – today’s count/100 )*10
Filter( avg(col1) using date > current_date-7)) --Average for last 7 days
Filter(count(col) using date = current_date) - today's value

Calculate sales for last 60 days

hello
want to make key figure or formula, which calculate sales for last 60 days, but also i need to add week group in report, so for each week i need sum sales for last 60 days before this ...
is any solution to that?
thank you.

Alex,
I'm not very clear on what you are asking.
If you use your time parameters in selections you can use caldays and weeks with your key figures.
ie. Selection 1 has your key figure and calday restricted t the last 60 days.
Selection 2 has your key figure and Fiscal Week but I am not clear on the range required for fiscal week.
Regards
Gill

Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

Hi Experts,
do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
For example
Sales Register
Purchase Register
Journal Register
Sales Analysis - Crystal Report
Purchase Analysis - Crystal Report
Check Register - Crystal Report
Production register
Pending Sales Order
Outstanding Receivable
Outstanding Payable
BankBook
CashBook
General Ledger
BP Ledger (Customer / Supplier)
Trial Balance
Balance Sheet
Profit & Loss Statment
Cash Flow statment
Excise reports
   RG 23 A Part I
   RG 23 A Part II
   RG 23 C Part I
   RG 23 C Part II
   Daily Stock Account
   RG 1
   ER 1
   etc....
Documets Layout
   Incoming Payment
   Outgoing Payment
   Journal Entry
   Transaction Journal Report - Crystal Report
   Sales Quotation
   Sales Order
   Sales Delivery
   Sales Return
   Sales Invoice (A/R Invoice)
   Purchase Order
   Goods Receipt PO
   Purchase Goods Return
   Purchase Invoice (A/P Invoice)
Inventory Transfer
Inventory - Goods Receipt
Inventory - Goods Issue
Best Regards,
Samir Gandhi

Hi Neetu,
Do you wish that at all customer site all concern involved in implemtation do the same work ?
I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
Best Regards,
Samir Gandhi

Switch from OINV to ODRF in Crystal Report layout for print the Invoice?

Hi,
I have imported in Sap Business One some standard report developed by Sap with Crystal Report (like Sales Invoice).
I have try to print my Invoices and all is OK, then I have try to print a Draft Invoice and, even in this case, is all ok. Then I have open the Crystal Report designer for this print module, and the entry point is the OINV table. How can he print succesful the Draft Invoice (that is in the ODRF table ObjType = 13)? Formula Field? I don't understand!!
Thank for the help!!
Marco

Hi Marco,
You only need a single Crystal report for this. Base it on a stored procedure which has two INT type parameters @DocKey and @ObjectId. Within your SQL create IF blocks to handle different @ObjectId values:
IF @ObjectId = 13 then use the invoices tables OINV/INV1 etc.
IF @ObjectId = 112 then use the draft tables ODRF/DRF1 etc.
Don't forget to put the @ symbol at the end of the parameter in the report itself. That is all that is needed to create a single report that works for both added invoices and draft invoices. You could extend the SQL to handle other @ObjectId values like 14 for AR Credit Notes and so on.
Regards,
Andrew.

An error in Crystal Reports Basic for Visual Studio 2008

Greetings from Peru,
We have a problem with one of the Crystal Reports products weu2019d like you to help us with. We work with Crystal Reports Basic for Visual Studio 2008.
The error weu2019ve detected is in one of our systemu2019s reports; this report shows data inside frames. When the content to show is larger (in height) than the space left in the page, the container object of the report makes a line break keeping the title and the frame empty at the end of that page, but the information is shown in the next page. What we need is that not empty frame is displayed.
Weu2019ve tried to solve this problem by adjusting the report in different ways (by programming coding), but unfortunately this problem is related to how much data is displayed, because if this data fit in the space left in the page, the line break would not occurs and the data is shown at the end of the same page.
We hope you can help us with this issue. I look forward to your comments.

All I can think of is trying CR 2008 (v.12.x). You can obtain an eval copy from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

Download a free app and try again, you can delete the free app afterward.

My app status is "inreview" for last 4 days.

I have uploaded my app using itunes connect after 7 days my app got reviewd but they rejected my app and displayed the status like metadata rejected. According to resoltion centre i have given specific info for review and resubmitted without adding new binary.Within hour my app status changed to "In review " but my app not reviewd yet now.It's in same status for last four days.What i need to do now? Is any way to get the reason of delay from apple?

Hi, LTKS.
Thank you for visiting Apple Support Communities.
Try removing the preference to sync calendar events in iCloud preferences. Once this is down enable the preference again and see if this resolves the issue.
Turn iCloud Calendars off and back on:
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences, then select iCloud.
Deselect the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and select iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue is resolved.
Restart your computer. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
If the issue persists, try all remaining steps in the article below.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
Regards,
Jason H.

HT5137 Unable to download more than 8 per cent of telegraph app for last 4 days since they upgraded it can you suggest anything to make it work

Have been unable to download telegraph subscription for last 4 days since they up graded the ap. can you tell me how to restore it please?

You're the second person in two days having trouble with the Telegraph update. Step one is a reset. Press and hold both the home and power buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.

Dynamic command execution fails in Crystal report viewer for parameters

We are using the Crystal Report Viewer for the .Net Application on the client side.The reports are designed using Crystal Report XI R2.
The issues that we are currently encountering is that, we are unable to load the combo-boxes in the pop-up for the parameters.
All the reports have multiple commands and the variables are of 'dynamic' type.
When the dialog box for requesting the pop-up comes up, It comes up empty even though they are linked to the respective commands.
Also,For reports having multiple parameters we are unable to give a single dialog box to get in all the parameters.It appears as a series of prompts.
Both,these issues are not encountered when the reports are launched via the Crystal reports developer tool.

Hello Varun,
I recommend to post this questionin the [dedicated NET forum|SAP Crystal Reports, version for Visual Studio;.
This forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Falk

Installing Crystal Report AddOn for 8.8

Dear All,
Please let me know how to install Crystal Report AddOn for 8.8 B one ? After installing the Addon When I am starting the Add On I am getting as error as External Connection to the database failed. SAP Crystal AddOn may not function properly. Please rerun the account setup with superuser login.
And when I click on Administration>>Crystal Reports Administration>> Account Setup screen to setup the account, I am getting error as Item- Could not commit action because the item is currently in focus [66000-23].
Regards,
Noor

Dear Noor,
You may check this thread:
Crystal reports for Business One 8.8
Thanks,
Gordon

Enrollment pending for last 4 days

I tried enrolling to IOS Developer program on 1st Sept 2014. However, till date, I have not got any response, it still says, 'enrollment pending' for last 4 days. Please help. My credit card was successfully charged. Can anyone please provide me the support help desk number?
We've received your order request.
Dear xxxx,
This is a summary of your order request, which will be
processed within 2 business days.
Product:
iOS Developer Program
Payment:
99.00 USD
Best regards,
Apple Developer Program Support

It's an epidemic everywhere. I now feel it's to get people to move to FIOS. They are too cheap to upgrade their equipment for DSL service. We need to bond together and fight back.

My phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.

What's ObjectId in Crystal Report 2008 for SAP B1 8.8

Hi all!
I am using Crystal Report 2008 for SAP B1 8.8, i don't know ObjectID use for what. In some report temlate of Crystal Report 2008 for SAP B1 8.8, i saw they aways use this.
Please explain for me.!!
Thanks!

There is a very usefull document, HowTo_Work_withCR_88.pdf.
This should have been in you 8.8 upgrade package.
This document explains quite a bit about how to create crystal reports and how to import into 8.8 as reports, or layouts.
Your question is not specific enough for me to answer, but if you re-phrase it, I'll see if I can help.
Rob

List of long running Conc Requests required for last 6 days

Hi All,
I need List of long running Conc Requests required for last 6 days.But somewhat my query is not working and giving me the output.
Could anyone please let me know what is wrong in the query which gives me the output for 60 mins but not for the last 6 days as required.
Query:
set echo off
set feedback off
set linesize 97
set verify off
col request_id format 9999999999 heading "Request ID"
col exec_time format 999999999 heading "Exec Time|(Minutes)"
col start_date format a10 heading "Start Date"
col conc_prog format a20 heading "Conc Program Name"
col user_conc_prog format a40 trunc heading "User Program Name"
spool long_running_cr.lst
SELECT
fcr.request_id request_id,
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/24))*60) exec_time,
fcr.actual_start_date start_date,
fcp.concurrent_program_name conc_prog,
fcpt.user_concurrent_program_name user_conc_prog
FROM
fnd_concurrent_programs fcp,
fnd_concurrent_programs_tl fcpt,
fnd_concurrent_requests fcr
WHERE
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/24))*60) > NVL('&min',45)
and
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/30))*6) > NVL('&days',5)
and
fcr.concurrent_program_id = fcp.concurrent_program_id
and
fcr.program_application_id = fcp.application_id
and
fcr.concurrent_program_id = fcpt.concurrent_program_id
and
fcr.program_application_id = fcpt.application_id
and
fcpt.language = USERENV('Lang')
ORDER BY
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/24))*60) desc,
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/30))*6) desc;
spool off
Thanks for your time!
Regards,

Hi,
I suggest that you look at this line in particular:
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/30))*6) > NVL('&days',5)and consider whether it is asking the question that you want it to ask.
Furthermore, it looks like you are expecting to get time in minute from the following line, and this definitely does not return minutes:
TRUNC(((fcr.actual_completion_date-fcr.actual_start_date)/(1/24))*60) I recommend finding one or two IDs for concurrent requests that you know are running for a long time, comparing the start and end times, testing that information against the output of the above functions, and adjusting your query accordingly.
Regards,
John P.
http://only4left.jpiwowar.com

Crystal Reports Utilization for Last 90 Days

Similar Messages

Maybe you are looking for