Crystal Reports Versus Sharepoint Issue

Hi,
We recently purchased Crystal Reports Server 2008 for our company, we've installed it successfully onto our reporting hardware but when we come to install the portal integration kit on our sharepoint server it throws an error indicating that the business objects XI v3.1 . NET SDK must be installed before the process can proceed. Where can I get this SDK from?
Regards,
Charles

You need to make sure you are installing CR Server 2008 V1 as it has the .NET SDK, V0 does not.
If it is V1 and you are installing onto a seperate web server you can install the Client tools for CR Server 2008 and that will install the .NET SDK.
Jason

Similar Messages

Display latest instance of Crystal Reports in SharePoint 2010

Dear Sirs,
I have BO 4.0 and SharePoint 2010 and Integration Option.
I need to display latest instance of Crystal Reports in SharePoint webpart.
I'd like to add "IOMS-Crystal Report Viewer" Web Part and display latest instance.
But in Settings (in SAPBusinessObjects tab) I need to type only CUID.
Is it possible to display latest instance of Crystal report in SharePoint Web Part?
Best regards,
Emmo

Dear Sirs,
I have BO 4.0 and SharePoint 2010 and Integration Option.
I need to display latest instance of Crystal Reports in SharePoint webpart.
I'd like to add "IOMS-Crystal Report Viewer" Web Part and display latest instance.
But in Settings (in SAPBusinessObjects tab) I need to type only CUID.
Is it possible to display latest instance of Crystal report in SharePoint Web Part?
Best regards,
Emmo

Crystal report layout printing issue

Hi Experts
I have a bit of an urgent issue which I can't seem to solve.
I have created a print spec using crystal reports 2008 sp3. I am trying to print it using an epsom dot matrix printer which is brand new. When I print from crystal reports itself, I have managed to get it printing perfectly. However, as soon as I run it through SAP, the orientation either goes out or it only prints 3/4 of the width of the page and to much as far as the being goes...
There are other print specs which have been created using pld which print fine.
Does anyone know the solution to this issue?

Hi,
To print Crystal report correctly on dot matrix printer is really a challenge for B1. You have to try everything possible to make it happen. Try search the forum first. There are quite a few discussions about it. However, solution is rare.
Thanks,
Gordon

Crystal Reports for Eclipse issues running under Oracle Jdeveloper.

I am having issues trying to get a small application that I developed in eclipse that uses Crystal Reports to work with Oracle's JDeveloper OC4J embedded server. I can run the application fine and when I try to view a report I get a partial report rendering and then get the following exception: 2006-10-03 06:55:38.778 NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.IllegalStateException: Writer already retrieved at com.evermind.server.http.EvermindHttpServletResponse.getOutputStream(EvermindHttpServletResponse.java:882) at com.evermind.server.http.EvermindHttpServletResponse.getJspOutputStream(EvermindHttpServletResponse.java:877) at com.evermind.server.http.EvermindJSPWriter.initServletOut(EvermindJSPWriter.java:480) at com.evermind.server.http.EvermindJSPWriter.writeOut(EvermindJSPWriter.java:492) at com.evermind.server.http.EvermindJSPWriter.jspflush(EvermindJSPWriter.java:391) at com.evermind.server.http.EvermindJSPWriter.close(EvermindJSPWriter.java:361) at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1574) at sample20_reports._MartyRpt_2d_viewer._jspService(_MartyRpt_2d_viewer.java:143) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) Does anyone have any idea of what is causing this? I really need help fixing this issue. Any help would be much appreciated.Marty 

I agree with Rob that it is likely the OutputStream object throwing the error. Another option is to try the following code for your viewer code: // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** { // Create the CrystalReportViewer object CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer(); // set the reportsource property of the viewer IReportSource reportSource = clientDoc.getReportSource(); crystalReportPageViewer.setReportSource(reportSource); // set viewer attributes crystalReportPageViewer.setOwnPage(true); crystalReportPageViewer.setOwnForm(true); // Apply the viewer preference attributes // Process the report String output = crystalReportPageViewer.getHtmlContent(request, response, application); out.print(output); } // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** Regards, Sean Johnson (CR4E Product Manager)

Crystal Reports for Eclipse issues running under Oracle Jdeveloper(10g)

Hi All,
I am having issues trying to get a small application that I developed in eclipse (CR4E)that uses Crystal Reports to work with Oracle's JDeveloper OC4J embedded server. I can run the application fine and when I try to view a report I get a partial report rendering and then get the following Exception:
Also while inserting on the page Showing error on the page
java.lang.IllegalStateException: Writer already retrieved at com.evermind.server.http.EvermindHttpServletResponse.getOutputStream(EvermindHttpServletResponse.java:880) at com.evermind.server.http.EvermindHttpServletResponse.getJspOutputStream(EvermindHttpServletResponse.java:875) at com.evermind.server.http.EvermindJSPWriter.initServletOut(EvermindJSPWriter.java:525) at com.evermind.server.http.EvermindJSPWriter.writeOut(EvermindJSPWriter.java:537) at com.evermind.server.http.EvermindJSPWriter.jspflush(EvermindJSPWriter.java:436) at com.evermind.server.http.EvermindJSPWriter.close(EvermindJSPWriter.java:406) at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1689) at NEWPROJECTR.jspService(_NEWPROJECTR.java:89) [/NEWPROJECTR.jsp] at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:598) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:522) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Can any boby tell me another way to integate Crystal report with Jdeveloper
Sincerely,
Amol

Something is writing out to both the JSP Response Writer and OutputStream. Writer is for text and OutputStream is for binaries.
This typically happens, especially on WebSphere and Oracle OC4J, when exporting a Crystal Report in the viewer. The DHTML view is HTML text, but the exports are binaries.
I'd recommend putting Crystal Report Viewer object in a Servlet - there you'd have full control over what goes in Writer and OutputStream. Once in the Servlet, ensure you don't write anything out yourself, but let the viewer have full control over what goes out.
Sincerely,
Ted Ueda

Crystal Report dialog box issues

I am very new at .NET, and this is my second post to this forum.
I've created a Crystal Report within a project using Visual Studio 2005 Professional Edition, on a Windows XP machine.
The report is handled by a CrystalReportViewer, which has its ReportSource set to the report.
Via a dialog box, the report asks for a signon and password for a SQL Server database. Then, via a second dialog box, it prompts for a parameter required by the report.
All of this works ok, but I have two issues:
1) I would like to set the database signon and password so that the user doesn't have to enter them each time he runs the report.
2) If the Cancel button is clicked on any of the dialog boxes, it renders the report unusable until I shut down the application and reopen it.
I have looked online for two days, but have not been able to find a solution to these above problems. It is probably simple, but I'm not seeing it.
I am attaching the relevant code for the button that runs the report.
    Private Sub cmdChecks_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdChecks.Click
            CrystalReportViewer2.DisplayToolbar = True
            CrystalReportViewer2.Visible = True
            CrystalReportViewer2.Height = 600
            CrystalReportViewer2.Width = 1000
            CrystalReportViewer2.Left = 10
    End Sub
Can anybody help me with this?
Thank you!

Hi,
I would like you to know the code of the logon based on the object models-
If you are using the ConnectionInfo then use the below code:-
//For web application
ConnectionInfo crConnection = new ConnectionInfo();
// Connection Information
crConnection.ServerName="D-2818-W2K";
crConnection.DatabaseName="Northwind";
crConnection.UserID="sa";
crConnection.Password="sa";
crReport.Load(Server.MapPath("CrystalReport1.rpt"));
Tables crTables=crReport.Database.Tables;
foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
          TableLogOnInfo crTLOI = crTable.LogOnInfo;
          crTLOI.ConnectionInfo=crConnection;
          crTable.ApplyLogOnInfo(crTLOI);
          crTable.Location=crTable.Location;// for multiple table selection
CrystalReportViewer1.ReportSource=crReport;
====================================================================================
//For desktop application
ConnectionInfo crConnection = new ConnectionInfo();
// Connection Information
crConnection.ServerName="D-2818-W2K";
crConnection.DatabaseName="Northwind";
crConnection.UserID="sa";
crConnection.Password="sa";
crReport.Load(Application.StartupPath + "//CrystalReport1.rpt");
Tables crTables=crReport.Database.Tables;
foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
          TableLogOnInfo crTLOI = crTable.LogOnInfo;
          crTLOI.ConnectionInfo=crConnection;
          crTable.ApplyLogOnInfo(crTLOI);
          crTable.Location=crTable.Location;// for multiple table selection
CrystalReportViewer1.ReportSource=crReport;
=====================================================================================
If using ReportDocument object model
//For web application
ReportDocument crReport= new ReportDocument();
crReport.Load(Server.MapPath("CrystalReport1.rpt"));
crReport.SetDatabaseLogon("sa","sa");
CrystalReportViewer1.ReportSource =crReport;
=====================================================================================
//For desktop application
ReportDocument crReport= new ReportDocument();
crReport.Load(Application.StartupPath + "//CrystalReport1.rpt");
crReport.SetDatabaseLogon("sa","sa");
CrystalReportViewer1.ReportSource =crReport;
To download sample code click [here|https://boc.sdn.sap.com/codesamples].
You can also take help from [Dev library|https://www.sdn.sap.com/irj/boc/sdklibrary]
Hope this helps!!
Regards
Amit

Crystal report 9 Viewer issue

Post Author: rikleo2001
CA Forum: Crystal Reports
First I need to know.1. My Crystal Report 9 Developer edition purchased seperately. Developed an .rpt and Includes in .NET 2003 as Web Service. Will this be consider as (Crystal report 9 ) or (Crystal Report .NET) ? 2. Which Patch/service pack I will apply on Web Server? CR9 or CR.NET?3. If I apply patch/Service Pack for CR9 it says "failed to create backup - 110" this means I won't be able to restore back to old Service pack?4. Service packs and Hotfix meant to be installed on Web Servers where actually web site is hosted? or do I need to install them on my Development machine too?Here is one more question
I am using Crytal report 9 developer edition within VS 2003.At run time my reports displays fine with Navigation tool on top, this report is using 2 different subreports.Here are my question.1. on Main report when I click on GO TO Next page button, it take me to page 2, then I want to go to third page, but it won't let me, it refresh Page 2 again, so in nutshell I can't go above page 2. Then I putting Custom page,and it worked fine. How can I use Navigation button to walk through between pages?2. UP button is disabled, how do I enable it? for example if I go to any of sub report, I have to select Backspace to go back to main report, and sometime it takes me to some differant location on main page. Using UP navigation will help to resolve this issue?
I checked another report with more than 3 pages without any sub report, and navigation next button works fine and walk me through multiple page.{cur_Fieldresult.Rdate}>= #2007/09/12# and {cur_Fieldresult.RDate}<= #2007/09/12#
I then applied time filter including date and time, and there it is dieing.{cur_Fieldresult.Rtime}>= #2007/Sep/12 06:13:55# and {cur_Fieldresult.Rtime}<= #2007/Sep/12 08:13:55# I am getting perfect data based on time filter, but why can't I navigate through? Any help guys??
Thanks in advance

what you can do is is select the export to xls
select options
and uncheck the export page header page footer.
then it wont export the header at all
if you can figure out a way to conditionally supress an addtional report header you can place what you want to export in there and it only displays when it is exported.
not sure how its can be done.

Crystal Report 9 performance issue wehn we move old DB to new DB server

We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
, Now we have issue with the performance, if the we call the reports from web application, it is talking long to retrieve the report at least 1 min.. , if we manually update the report data source pointing to new server and the reports are pulling in 1 second, Is there any easy solution to update all the report pointing to new server, we have 3000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
Thanks!
Ram

The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

Crystal Reports Excel Export Issue - page footer not being displayed

We recently converted all Crystal Reports from Visual Studio 2003 to Visual Studio 2005 sp1, .NET 2.0, Crystal Reports for .NET. I have the latest merge modules from business objects. All reports & footers worked fine in VS2003 ... but now when I export to PortableDocumentFormat (PDF) or WordForWindows (DOC) the page footers appear correctly. But, when I export to Excel (XLS) like the code below, the page footers do not appear. We need to place a disclaimer at the bottom of every page of an exported excel document. I checked the print preview, and I tested printing the document ... the the footer is not being utilized properly by the Crystal Reports export.
System.IO.MemoryStream oStream = new System.IO.MemoryStream() ;
oStream = (System.IO.MemoryStream) report.ExportToStream(CrystalDecisions.Shared.ExportFormatType.Excel) ;
Response.Clear() ;
Response.Buffer = true ;
Response.ContentType = "application/vnd.ms-excel" ;
Response.BinaryWrite(oStream.ToArray()) ;
Response.End();
I have asked the question in msdn forum
http://forums.msdn.microsoft.com/en-US/vsreportcontrols/thread/0ead9e34-bc45-4062-90dd-17f8f8ebf062

fyi - if i hadn't mentioned it, problem occurs in all our environments (developer workstation, development server, testing server, production server, etc.)
on my development workstation i found the file 3 times
c:\program files\common files\business objects\1.0\bin\crxf_xls.dll
has file version 9.1.1.557
c:\program files\common files\business objects\2.7\bin\crxf_xls.dll
has file version 10.2.0.1093
c:\program files\common files\business objects\3.0\bin\crxf_xls.dll
has file version 11.0.0.1937
on my development server (and our other environment servers too)
c:\program files\common files\business objects\2.7\bin\crxf_xls.dll
has file version 10.2.0.1210
so just from that i notice that the file versions in the 2.7 bin are different from my developer workstation to my development server ... but the issue still occurs in both places.

Crystal Reports Server 2008 (Linux) - Crystal Reports/MySQL/ODBC Issue

Hello,
I have successfully installed CRS '08 on a Red Hat Enterprise Linux 4 server. All services run fine.
In the CMC, I have uploaded a Crystal Report that connect to a remote MySQL server.
I have installed the My SQL ODBC 3.51.11 and .12 Drivers as a System DSN.
I have proven that the reports run fine in Crystal Reports 2008 directly against the remote MySQL DB server.
(in Windows but with the same 3.51 ODBC Drivers)
I have also proven that the database connection works okay from the CRS '08 Red Hat server to the remote MySQL DB server, when also creating a system DSN (using bash ./ODBCConfig)
The problem is that when I log into the CMC or InfoView, and when I run the Crystal Reports from there, I get an error message:
"Error in File <MyCrystalReport>: Failed to load database information"
Is there something wrong with my specific Crystal Reports' Database Configuration? (Right click- Database Configuration)
I see the driver was registered correctly in the /etc/odbc.ini file
Am I supposed to set any other ODBC environment variables?
Is there are firewall issue (port 3306 is already open)?
In summary, the install was successful, and Crystal Reports can be uploaded and viewed via CMC or InfoView, but I cannot run the Crystal Reports against the database.
Please advise, Thanks!

Hi, I'm facing a similar problem. My ODBC DSN never works with CRS. Here are the details: 
(1) I installed the CRS 2008 in /opt/crystalreportsserver_2008_v1/ on a Linux platform. The CRS works well. I created a report with Crystal Reports 2008. This report directly connects to a MySQL server. After I published the report and manually modify its database configuration, I can browse it from InfoView. I'm sure that CRS, MySQL, and a report connecting to MySQL are all good. 
(2) Then, I created an ODBC DSN on a Windows platform. This DSN connects to a MySQL server. I created another report with Crystal Reports using this DSN. The report can show the data within Crystal Reports. 
(3) Then, I published the second report to CRS, but when I try to browse it, I always get such a message: Failed to open the connection. 
I have configured the ODBC for CRS on the Linux server and I think the configuration is correct. This is how I do that: I edited the /opt/crystalreportsserver_2008_v1/bobje/odbc.ini file. In the file I added a data source called ods_telstar. Following is the content of the file: 
[ODBC Data Sources] <
CRSQLServerWP=DataDirect 5.3 SQLServer Wire Protocol Driver 
CRSybaseWP=DataDirect 5.3 Sybase Wire Protocol Driver 
CRText=DataDirect 5.3 Text Driver 
%SYBASEDSN%=DataDirect 5.3 Sybase Wire Protocol Driver 
ods_telstar = MySQL 
 
... 
 
[ods_telstar] 
Description = ODS on telstar 
Trace = Off 
TraceFile = stderr 
Driver = /opt/crystalreportsserver_2008_v1/bobje/enterprise120/linux_x86/odbc/lib/libmyodbc5.so 
SERVER = xxx 
USER = xxx 
PASSWORD = xxx 
PORT = 3306 
DATABASE = ods 
 
In the middle I removed some data source definitions that are by default in the file. Note that I use "xxx" to replace the server name, user, and password. Such information is for internal use and I'm sure the original information is correct. The MySQL ODBC driver file has been put in the correct location. Correct access permissions has been assigned to the file. 
I've tried to restart the CRS server, but still the report using ODBC DSN cannot be viewed. 
The reason that we want to user ODBC DSN is that we may have many reports to publish. When we design the reports, we specify that they get data through an ODBC DSN such as ods_telstar. If we configure the same DSN on CRS, then we don't need manually modify each report's configuration after we publish them. If these reports are directly connecting to MySQL, then we have to manually modify each one's database configuration after we publish them. 
I've no idea what's wrong with all the setup. Any suggestions and comments are appreciated!

Crystal Reports - ECC - SSO Issue

Team,
System Details.
1. BOE XI 3.1 SP3
2. Crystal Reports 2008
3. SAP ECC 6.0
4. SAP NW 7.x
Scenario: Crystal reports running against ECC system. SSO configured on Crystal Report database configuration option, report is accessed through SAP NW portal (which in turn is configured to BO Info View using KM IVIEW option). Report fails with "The database login information is either incomplete or incorrect" error message.
BUT the same user id (as the user id ) when hard coded ("Use same database logon as when report is run") in Crystal Reports database configuration static option ("Use original database logon information from the report") works fine.
Please let me know your thoughts regarding how to debug this issue?

Hi,
if you want to have SSO for the report you need to :
- have the SAP Authentication configured and the SAP Roles imported
- the SAP Roles need to have the necessary rights on the BOE Server
and in your case because of the portal part :
- all machines need to be in the same domain
- all URLS need to be fully qualified
- trust between ECC and Portal needs to be configured
- your ECC system needs to accept portal token
ingo

Crystal Reports 11g Performance Issue

We just upgraded our database to Oracle 11g from Oracle 10g and we are having significant performance issues with Crystal Reports.
Our DEV and TEST environments are on 11g and are very slow to connect to the database and attach to specific tables. It is unusable. Our PROD environment is still 10g and works fine.
We have tested with both the lastest version - Crystal Reports 2008 V1 and Crystal Reports XI R2 SP6. We have also tested on several different machines.
We are using Oracle 10g ODBC drivers.
Does anyone have any recommendations?

You could also try our Data direct drivers we have available on our WEB site using this [link|https://smpdl.sap-ag.de/~sapidp/012002523100008666562008E/cr_datadirect53_win32.zip].
Those drivers are the most recent and do support 11g. It also has a wired driver that doesn't require the client to be installed.
Also, highly recommended that when you do update the Oracle client to uninstall 10 first. There have been issues with CR and Oracle mixing the Oracle dependencies and causing problems.
Thank you
Don

Crystal reports free license issue...

One of our customers receives the following error when using our software in a Citrix environment.
"A crystal reports job failed because a free license could not be obtained in the time allocated. More licenses can be purchased from Crystal decisions."
Does anyone know how to resolve this issue? or where to purchase more licenses?
The software comprises Winforms dotNET Famework 1.1 application using Crystaldecisions dotNET library to load and run reports created with Crystal 8.5
Thankyou for any help you can provide.

Hi,
Check this:
https://boc.sdn.sap.com/
https://boc.sdn.sap.com/node/19937
https://boc.sdn.sap.com/developer/gettingstarted
https://www.sdn.sap.com/irj/sdn/forums
Free trials:
http://www.businessobjects.com/product/freetrials.asp
Hope this helps...........
Rgs,
Ravikanth.Indurthi

Crystal Reports and JobBoss issues?

Iu2019m hoping someone can help find a solution to a problem we are having with Crystal Reports when using the program with JobBoss.
We are using JobBoss version 11.3.8 along with the trial version of Crystal Reports XI. Our PC uses Windows XP. We had a Consultant develop a custom report and he uses Crystal Reports 9.
Our problem is when we tried running the report we get an error that says: Crystal Reports ActiveX Designer: File not found
Can someone suggest a route for us to take to resolve this issue? Is it a Crystal Reports issue or a JobBoss issue or something completely different?
Thanks

Hello,
Moved your post to the legacy forum.
Likely what is happening is the application is specifically looking for the file craxddrt.dll version 9. CR XI puts that file in a new location.
Likely the only way to fix this upgrade issue is to have the consultant look over the code or if you have the source code then find the updated dll and redirect your app to use it rather than the old one.
Don

Crystal Reports and Sharepoint Access Services Connectivity

How do I establish a connection between Crystal Reports and an access database hosted on a Sharepoint Access Services site? I've searched the forums but can't find any guidance.
Thanks in advance,
Angela

Hi Angela,
Through an ODBC connection is about the only way, how to configure it would be up to Share Points help file to describe if it supports it.
Don

Crystal Reports Versus Sharepoint Issue

Similar Messages

Maybe you are looking for