Crystal Reports XI R2 and Window Server 2008 Hyper-V environment

Hello,
Is there any known issue that Crystal Reports XI R2 running on Window Server 2008 Hyper-V enviroment?
I tested on Development Server which is Window Server 2008 and it is working fine but when tested with another servers which are in Hyper-V enviroment and ASP.NET program keep crushing.
I got the below error on my event log:
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x03976ce8, process id 0x%9, application start time 0x%10.
Thanks,
Yin

Hi Yin,
Hyper-V I assume is the Hyper threading Intel and others enabled correct? Should not make a difference other than performance. You are still using 1 CPU so the cycles are being split between multiple programs. Not really an advantage.
Try using ProcessMonitor and search on access denied to see what is having the problem.
Other issue is CR XI R2 is not supported on windows 2008, or at least you should be running Service Pack 6 to at least get Windows 7 and Vista support, which is about the same as Windows 2008.
Go to our download page and install SP 4 full build and then SP 6. ( assuming you don't have any SP's installed ) or look in the download area and download all of the patches from SP 4 as well as the distribution files for how ever you are deploying your application.
Thank you
Don

Similar Messages

  • Regarding crystal report runninv problem in windows server 2008

    My name raja gupta.i want to clarify my issue.I used crystal reports 2005(10.0 version).I am accesing that reports in windows server 2008(64 bit) operating system.But i am unable to see the reports,reports was not working and not opened.Give me reply asap.
    Thanks & Regards,
    Raja.

    I would advise to check if windows server 2008(64 bit) is listed as a supported platform.
    If you need urgent support, you can always contact Customer Interaction Center (CIC) and purchase a Single Support Case.
    The CIC contact information you can find in the following SAP note:  
    Note 560499 - Global Support Customer Interaction: Telephone/fax/e-mail
    u2026.
    Business Objects customers:
    Contact information for Business Objects # new support telephone numbers, all numbers available 24 hours 7 days a week
    If the toll-free telephone number listed below is not available for your Customer Interaction Center or Support Advisory Center, call the following emergency numbers:
    - EMEA Region:                                  +353 91 404395
    - North and Latin America Region:               +54 11 5129 3717
    - China, Hong Kong, Japan, South Korea
      Singapore, Taiwan:                              +86 411 3963 1129
    - Malaysia, Philippines, Thailand:               +91 80 4139 9216
    - Australia, New Zealand:                        +61 2 9935 4660
    America
    CIC & SAC Center     Contact information
    USA     T: 1 866 8907686 (toll-free)
         E: [email protected]
    Canada     T: 1,866 6603577 (toll-free)      
         E: [email protected]     
    APJ
    CIC & SAC Center     Contact information
    Australia     T: 1800 081 923 (toll-free)      
         E: [email protected]     
    China CNC     T: 10800 7490097 (toll-free)      
         E: [email protected]     
    China Telekom     T: 10800 4900088 (toll-free)      
         E: [email protected]     
    Hong Kong     T: 800 964 865(toll-free) or +852 25391948           
         E: [email protected]          
    India     T: + 91 80 4139 9217           
         E: [email protected]          
    u2026

  • Running Crystal Report 10.2 on windows server 2008

    Hello, Everyone,
    I am migrating my ASP.NET application from windows sever 2000 to windows server 2008.
    I have Crystal reports that was converted from version 9.1 to version 10.2, and application is using ASP.NET 2005.
    I have installed on the server .net framework 3.5 and 4.0. Also Installed CRRedist2005_x86.msi u2013 Crystal Report redistributable package for .net Framework 2.0. To my understanding i dont need to install .net framework 2.0 since i have 3.5 installed.
    Web app is running fine, but when i am running Cryastal Report I see the page that displays report, it is up for a second or two and when report is starting to generate page is closed. No errors.
    Does anyone experiencing the same problem running CR 10.2 on windows server 2008? Am i missing something?
    Can somebody help me?
    Thanks,
    Michael

    CR 10.2 is not supported on WIN 2008. See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki for more details.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Crystal Reports 10 Compatibility with Windows Server 2008 R2

    Hello I'm a developer and I'm in the process of migrating my ASP.NET application that uses crystal reports 10 from a win2k3 server to a win2k8 R2 server.
    First of all, is CR 10 compatible with windows server 2008 R2?
    The application is up and running on the new server, the only thing that fails is the reports. I get the following error message:
    Error in file ....c:\windows\temp\{TEMP_FILE_NAME}.rtp
    Failed to create the Crystal Query Engine.
    This occurs at report.load(..)
    I did already grant NETWORK SERVICE access to Temp and ran the CR redistribute msi that came with Visual Studio 2008 - CRRedist2008_x64.msi.
    Please help

    YESSSS!!!! IT WORKS!!
    Finally, after days of installing, uninstalling, setting permissions, crawling through process monitor output.. I finally have it working.
    For anyone with the same problem, here's what worked for me:
    I had to use the 32-bit runtime
    set application pool to 32-bit
    grant the following permissions based on the different errors listed below:
    Error in File UNKNOWN.RPT
    - Give NETWORK SERVICE list permission on C: Drive, run a report, then remove NETWORK SERVICE from the list (weird, but works, and I had to do this every single time I setup Crystal Reports on a new computer so far).
    - You might also have to set correct permission on 'Temp' if u get still get this error.
    Error in file ....c:\windows\temp.rtp
    Failed to create the Crystal Query Engine
    - Grant correct permission to C:\Program Files (x86)\Business Objects (your path may vary)
    (For me it was giving Users Modify permission to Business Objects folder)
    Unknown Query Engine ErrorError in File C:\Windows\TEMP\.rpt:
    Unknown Query Engine Error
    - Switch application pool to 32-bit.
    - Make sure Crystal Reports Runtime is 32-bit (CRRedist2008_x86.msi)
    Thank you guys so much for all your help and sticking through this with me.

  • Crystal Reports XI R2 on Windows Server 2008

    How can I deploy the CR runtime and run my reports made in CR XI R2 SP4 on Windows 2008 Server, given that the server is a 64 bit OS
    Some of my clients are planning to move my application on Windows 2008.
    MP

    Hi,
    Below are the Supported Operating Systems for Cystal Reports Server XIR2 SP2::
    [Windows Server 2008 is not supported with CR Server XIR2 SP2]
    Desktop Products :
    u2022 Windows 2000 SP4 Professional
    u2022 Windows XP SP1 Professional
    u2022 Windows XP SP2 Professional
    u2022 Windows Vista (All Editions)
    u2022 Windows 2000 SP4 Advanced Server
    u2022 Windows 2000 SP4 Datacenter Server
    u2022 Windows 2000 SP4 Server
    u2022 Windows Server 2003 Datacenter Edition
    u2022 Windows Server 2003 Enterprise Edition
    u2022 Windows Server 2003 Standard Edition
    u2022 Windows Server 2003 Web Edition
    u2022 Windows Server 2003 SP1 Datacenter Edition
    u2022 Windows Server 2003 SP1 Enterprise Edition
    u2022 Windows Server 2003 SP1 Standard Edition
    u2022 Windows Server 2003 SP1 Web Edition
    Server Products :
    u2022 Windows 2000 SP4 Advanced Server
    u2022 Windows 2000 SP4 Datacenter Server
    u2022 Windows 2000 SP4 Server
    u2022 Windows Server 2003 Datacenter Edition
    u2022 Windows Server 2003 Enterprise Edition
    u2022 Windows Server 2003 Standard Edition
    u2022 Windows Server 2003 Web Edition
    u2022 Windows Server 2003 SP1 Datacenter Edition
    u2022 Windows Server 2003 SP1 Enterprise Edition
    u2022 Windows Server 2003 SP1 Standard Edition
    u2022 Windows Server 2003 SP1 Web Edition
    Please revert in case of any further queries.
    Regards,
    Deepti Bajpai

  • Support for Crystal Report XI runtime on Windows Server 2008 R2

    Hi all,
    I was wondering if Crystal report XI runtime is supported on Windws Server 2008 R2.
    I've found this url http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e06b8953-a62b-2d10-38b9-ca71f747e2b1?QuickLink=index&overridelayout=true&59511066859035
    We are develping with .Net framework 2.0.
    Thanks in advance.
    Regards.
    Roberto.

    Hi Roberto,
    By 'Crystal report XI runtime' if you mean CR 11.0, then it is not supported with Windws Server 2008 R2.
    See the compatibility chart.
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=56787567
    The link you have referred is for Crystal Reprots for VS 2010 / 2012 / 2013 which is the lates version of CR which provides the SDK.
    http://scn.sap.com/docs/DOC-7824
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Save printer to layout in crystal reports XI R2 and windows vista ,7 , 2008

    Hi ,
    I have a problem with the crystal report design , I use CRXI R2 SP6 and with windows vista , windows 7 and windows server 2008 .
    The problem is that when I built the report and I go to set page from file , in the page setup form I don't have the printer select button and so I can't save the printer in the report.
    With SO earlier it's all ok.
    Thanks
    Mauro

    Hi Enrico,
    Can you let us know what is the format of the image you are using.
    Thanks,
    Naveen.

  • Lms 3.2 and window server 2008 r2 standard

    we have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used togetther
    Could we upgrade to lms 4.0.1 ? If so, how can we do ?
    thank you.
    Duyen.

    Correct, LMS 3.2 is not supported on Windows 2008 R2.  You can upgrade to LMS 4.0 (which is supported on R2), but that is not a free upgrade from LMS 3.x.  You can, however, download a free 90-day eval of LMS 4.0 from http://www.cisco.com/go/nmsevals .
    It sounds like you need to contact your reseller or account manager to see what they can do.  If you just purchased LMS 3.2, you may be able to get a free or discounted upgrade to 4.0.

  • Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

    LMS 3.2 and window server  2008 standard, get error when we try
    Khi truy nhập vào menu chức năng:
    License Server/Daemon Manager is down. Please check license.log for more information.
    access licensing:
    Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
    Lincense.txt is file log of LMS
    Must I have to active window server 2008 first ?
    thank you very much ?

    Hi ,
    --Add the Casuser to the Administrator Group
    and then reset the casuser password:
    1. Go to CSCOpx\setup\support> and run the following command:
    resetCasuser.exe
    2.     Restart the daemon manager:
    Net stop crmdmgtd
    Net start crmdmgtd
    Let me know how it works
    If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
    --also screen shot of the below directory :
    NMSROOT\etc\license
    Thanks
    Afroj

  • Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

    Hi,
         I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
    FQDN: active.test.com
    Domain Name : test.com
    User : ccasso
    2011-02-05 12:00:30.225 +0700 WARN  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server was not running ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server starting server ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Server is now running ...
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - SPN : [ccasso/[email protected]]
    2011-02-05 12:00:30.225 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - building kdc list for domain active.test.com
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - done building kdc list for domain active.test.com
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - KDC(s) :[10.0.240.100]
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - writeKrbFile: writing to file ../conf/krb.txt
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - creating login context ...
    2011-02-05 12:00:40.224 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - GSSServer - created login context ...javax.security.auth.login.LoginCon                                                                           
    text@5ad7b2
    2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer                                                                                           
    - Unable to start server ... KDC has no support for encryption type (14)
    2011-02-05 12:00:50.244 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - Notifying GSSServer status Stopped
    2011-02-05 12:00:50.244 +0700 INFO  com.perfigo.wlan.jmx.adsso.GSSServer                                                                                          
    - server is exiting .

    Hi,
    This error means that your DC does not support the encryption method the ACS wants to use.
    Usually this happens when you run 2008 Server with 2003 functionality...
    You will need to run ktpass.exe according to the DC you are running:
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
    For Windows 2008 Server at 2003 Server functional level:
    ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
    PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Is there a 32 Bit edition available for windows server 2012 and windows server 2008

    Dear All,
    Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
    Regards,
    Ahmed

    Hi,
    Quote：
    All editions of Windows Server 2008 R2 are 64-bit only.
    Reference link below(session Supported upgrade paths):
    https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
    And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Compatibility forms 6i and Windows Server 2008

    Hi,
    We want to change our Server from 2003 to Windows Server 2008 64bits.
    My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
    Will the migration be successfull, or will we have some bugs?
    Thks for your help.
    O.

    YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

  • T-500 and Windows Server 2008 R2 RTM

    My setup:
    T-500 dual booting via VHD - Windows 7 and Windows Server 2008 R2 (both 64-bit).
    My problem:
    I'm having a devil of a time with this one.  I get random BSOD'd in my Server 2008 R2 installation, but my Win7 install is rock solid.  Sometimes it's right away, sometimes after a few minutes, sometimes when trying to use WordPad.  I cannot get my wireless card (Intel 5100 AGN) to work along with video drivers for my ATI card, so I'm leaning towards a driver issue.  I'm trying to use the Win7 drivers for anything that's missing drivers at the moment, since they are the same under the hood, so to speak.
    Has anyone else experimented with this setup and/or run into similar problems?  Thanks!
    T500: T9400 (2.53GHz), 4GB RAM, 160GB 7200rpm, 15.4in 1680x1050 WSXGA+ LCD, 256MB ATI Radeon HD3650, DVDRW, Intel 802.11agn wireless, AT&T WWAN, Bluetooth, Modem, 1Gb Ethernet, 9c Li-Ion, Windows 7 Ultimate x64 RC (Build 7100)

    You shouldn't have any big issues, but there are a couple of gotchas that Server versions of Windows have (a notable one is the Bluetooth stack).  Those are somewhat detailed in the review, though (and that blog also details how to get other features of Server 2008 R2 running).

  • Error starting forms and reports manageed servers on windows server 2008

    Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
    [2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
    [] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
    [APP: em] Falta la configuración de registro o no es válida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
    any suggestions?
    weblogic 10.3.4
    forms 11.1.1.4
    windows server 2008 x64
    JDK :java 6u30 x64

    delete all, re-install all... ok

  • Crystal Report Export not working in Server 2008

    Hi
    Please Help..
    I am Using Crystal report Report 9 with VB 6 and SQL Server 2008. All my Client PC s (Windows XP SP3) are able to export the reports in any format but with my SERVER - (Windows Server 2008 (32 Bit)) it isn't possible. The Button is very much enabled
    but when I click on it, Nothing happens.. Please Help... 

    Hi,
    I would like to suggest you try to run SAP Crystal Reports under Compatibility Mode to check if it works.
    Run in compatibility mode with administrative privilege
    ================================
    1. Right-click the .exe file of the SAP Crystal Reports program and choose
    Properties.
    2. Switch to the
    Compatibility tab.
    3. Please check the
    Run this program in compatibility mode for and choose
    Windows XP (Service Pack 3).
    4. Check the
    Run this program as an administrator box under the
    Privilege Level.
    5. Click
    Apply, click OK.
    Note: If the option is unavailable when running this program as an administrator, it means that either the application is blocked from always
    running elevated, the application does not require administrative credentials to run, or you are not logged into the computer as an administrator.
    If it does not work, it is high recommended to contact your local SAP Support Engineers for further assistance. They are more familiar with their own
    product.
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Movie Purchases Question

    I am looking at purchasing an Apple TV. I like the idea of keeping my purchased movies on my Apple TV, rather than consuming HD space on my MBP. My single concern is whether I will be able to push those purchased movies from my Apple TV to my iPhone

  • Can't click drop-down lists in curves adjustment layer

    Odd behavior in released x64 version of CS6 for Windows: on my laptop (ASUS G73S with 1.5 gb nVidia GeForce video), when I crop an image, the drop-down menus in a curves adjustment layer become unclickable. But I can still access the RGB channels usi

  • Installing 10.1.2.0.2

    Hi Has anybody installed the 10.1.2.0.2 version of the app server with Forms, Reports and Discoverer. Did everything went ok? Any problems in the installation or configuration process?

  • How can i find the base UOM?

    Hi , I have created an rfc function module in our BW system.  I have to call this RFC from SAP R/3 . To call this RFC I have to pass MATERIAL NUMBER , Quantity Required and  UOM. Every thing is working good. As per the Spec , "if UOM is not there on

  • Table data  transfer question

    Hello, Hi, There are 2 tables accounts and rpt_accounts ( Notice that table names are different ) Accounts                     id name 1 vishal 2 gufran 3 mazil Rpt_accounts id name 1 vishal 2 ibrahim (Notice that id 2 has different name and there is