Crystal Reports XI R2 SP 6 - Issue with setting Data Source Location

Hello,
After some initial difficulty instally CR XI R2 with SP 6 on a windows XP machine (see thread Error on installation of CR XI R2 SP6), the Crystal Reports environment seemed fine, however, when I tried resetting the datasource location on an ODBC datasource between a development and production server, I get the message 'Some Tables could not be replaced as no match was found....' The tables in the two databases are identical so that isn't the issue.
Here is some additional information
The issue seems related only to DSN's that point to a progress database. I am able to reset datasource locations for DSN's that use the SQL server driver and also for those that use the XML CR ODBC XML Driver 5.0. I am not able to reset the datasource locations on the DSN's that use a Progress Open Edge 10.1 DB driver.
I can create a new report using the DSN for the Progress Driver and add tables, but the table names are coming up as an alias - i.e. if I add a table called PM_Plant, the table added to the report is PM_Plant1.
I also found I can go into existing reports, rename the tables in the database expert to be an alias (appending 1 to the end of the table name), then I am able to repoint them using the datasource location screen.
So it looks like there is a potential work around to the situation, but I didn't run across any information that we should need to do that.
Any recommendations how to fix the issue?
Thanks,

Hi Don,
The reports were created with CR XI R1 on my PC initially and the progress drivers have not changed since. The reports were deployed to a server and I pulled them back to my PC to test out any changes after the CR XI R2 SP 6 upgrade. (so there is really only one machine involved, the one that had the upgrade).
I did look at the settings for verifying and tried playing around with those and also with verifying the database but that didn't make any difference.
I wasn't quite sure which registry keys to look at or what the values should be so wasn't able to pursue that option.
All the tables in the progress database use underscores as part of the table name (i.e. PM_Plant, PM_Company), do you think the upgrade to SP6 means that the underscore is now a reserved character and that is why the tables are getting aliased? If so, do you know how to change the alias settings or the list of characters that are reserved?
Just an FYI, I had to downgrade back to CR XI R1 at this point to get work done. If time allows, I'll retry the upgrade in about 5-7 weeks. I discussed the issue with a system admininstrator and we willl try removing the progress drivers and DSN's prior to trying an upgrade again to see if that makes a difference. I'll also make sure to keep track of all Report Options and Options and also registry keys to see what changes.
Thanks

Similar Messages

Issue with 2LIS_02_SCL Data source

Hi Everybody,
I am facing the below 2 issues with 2lis_02_scl data source,
1) This is fetching only the records ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
Can anybody help me on this,
Regards,
Gopinath

Hi Gopinath:
Have you already applied any SAP Note to solve this problem?
Please check if the SAP Note below is applicable to your system.
668177 - "LIS BW: wrong quantity for documents with invoice plan"
Regards,
Francisco Milán.

Crystal Reports Server 2011 and BW 7 as a data source for uploaded reports.

Hello,
I am hoping someone can provide me with a clear answer for this.
Lets assume..
1. We are running crystal reports server 2011 and BW 7
2. We want to publish a report in the BI Launch pad so users can view it
3. Can we create a crystal report in the report designer with the data source as BW 7 then upload it to the reports server and have it run on-demand and Run over night?
Can anyone shed some light in this area?
kind regards
david

Hi,
Crystal Reports Server is not supporting the SAP Integration Kit. You will need BusinessObjects Edge or BusinessObjects Enterprise
regards
Ingo Hilgefort

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Performance issue with Oracle data source

Hi all,
I've a rather strange problem that I'm stuck on need some assistance on.
I have a rules file which drags data in via an SQL data source thats an Oracle server. If I cut/paste the 3 sections of "select" "from" and "where" into SQL-Developer and run the query, it takes less than 1 second to complete. When I run the "load data" with this rule file or even use the "Retrieve" with the rules file edit, it takes up to an hour to complete/retrieve the data.
The table in question being used has millions of rows and I'm using one of the indexed fields to retrieve the data. It's as if the Essbase/Rule file is ognoring the index, or I have a config issue with the ODBC settings on the server that is causing the problem.
ODBC.INI file entry for the Oracle server as follows (changed any sensitive info to xxx or 999).
[XXX]
Driver=/opt/data01/hyperion/common/ODBC-64/Merant/5.2/lib/ARora22.so
Description=DataDirect 5.2 Oracle Wire Protocol
AlternateServers=
ApplicationUsingThreads=1
ArraySize=60000
CachedCursorLimit=32
CachedDescLimit=0
CatalogIncludesSynonyms=1
CatalogOptions=0
ConnectionRetryCount=0
ConnectionRetryDelay=3
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
HostName=999.999.999.999
LoadBalancing=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=xxx
Password=xxx
PortNumber=1521
ProcedureRetResults=0
ReportCodePageConversionErrors=0
ServiceType=0
ServiceName=xxx
SID=
TimeEscapeMapping=0
UseCurrentSchema=1
Can anyone please advise on this lack of performance.
Thanks in advance
Bagpuss

One other thing that I've seen is that if your Oracle data source and Essbase server are in different geographic locations, you can get some delay when it retrieves data over the WAN. I guess there is some handshaking going on when passing the data from Oracle to Essbase (either by record or groups of records) that is slowed WAY down over the WAN.
Our solution to this was remove teh query out of the load rule, run it via SQL+ on a command line at the geographic location where the Oracle database is, then ftp the resulting file to where the Essbase server is.
With upwards of 6 million records being retrieved, it took around 4 hours in the load rule, but running the query via command line took 10 minutes, then the ftp took less than 5.

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Issue with Treasury Data Source - 0CFM_DELTA_POSITIONS

Hi all,
I'm trying to use data sources 0CFM_INIT_POSITIONS & 0CFM_DELTA_POSITIONS to load treasury data.
Through INIT data source the data has been initialized and loaded the history data to BW from R/3. I'm able to see the entry in time stamp table for the INIT data source. Also the initialization has been done for DELTA_POSITIONS. But I couldn't see any entry in time stamp tabe, whereas queue has been created in RSA7.
After that we made few transactions in R/3 and trying to take those data through DELTA_POSITIONS. I checked in RSA3, system fetches more than 5000 records (which was not made after initialization) and beyond that it gives dump saying termination point has been set in the program.
Can some one please explain me the logic on which these data source works? Any other setting needs to be done?
With regards,
Muthu.

Hi Pooja,
1) It might be Database table space issue in the backround, Please checkit out with BASIS
Regards,
Marasa.

Issue with 0SRM_TD_IV data source delta

Hi experts,
I have an issue with the invoices numbers not updated correctly when one of invoice item is deleted in SRM.
For example:
In SRM:
Invoice number: 50001168
Invoice item : 1, quantity: 30 - deleted ( deletion indicator - x)
Invoice item : 2, quantity: 4
Invoice item : 3, quantity: 7
In standard extractor (0SRM_TD_IV) RSA3 : exactly same as SRM data.
In standard DSO (0SRIV_D3) : only invoice number and invoice item one is present, which suppose to be deleted in BI.
Invoice number: 50001168
Invoice item : 1, quantity: 30
When I did the full repair for this invoice number from SRM. I got all the 3 invoice items. It did not overwrite invoice item 1, which is deleted in SRM. the way it works in SRM is, it didn't delete the invoice item but flaged with the deletion indicator x.
Know every thing look good up to extractor RSA3. what should I do know to fix this issue? I see that we don't have tranformation rules in BI 7.0 insted we are using trnasfer rules and update rule. Please let me know.
Thanks,
Chandra

Hi Chandu,
The way I understand your issue is that,
when you do a full upload, you get the information correctly in RSA3 and DSO.
when you run a delta, you are not getting all the line items.
1) Please check whether there are any relevant SAP notes for this extractor to fix this delta issue.
2) Please check whether there is any code in the update rule or transfer rule that deletes the missing line item
Thanks,
Krishnan

Master data load issue with flexible data source

Hi All,
1CL_OLIS001have this data source for loading configuration data. the changed records are not updating into this DS regularly.
I have delta load on this every day. It loads correct data for one month and suddently it will start loading 0 records every day with out failing. If I reset the delta, it will work fine for month or two and then will corrupt again.
Is any one have this kind of issue before Please suggest to resolve this issue permanently?
Thanks and Regards,
Pooja

Hi Pooja,
1) It might be Database table space issue in the backround, Please checkit out with BASIS
Regards,
Marasa.

After installing Crystal Reports XI on Windows 2003 server with one error..

After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error. I had to regsvr it manually. Crystal still didn't run. Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services. Thanks.

Thank you for sharing your finding. Very much appreciated.
The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
Ludek

Crystal Reports 2008 and BOXI3.1 issue

Hi,
Can somebody please help me finding a solution ?
Here is the Problem:
Environment Details DEV:
BOXI 3.1product version 12.1.0.882
Crystal Reports 2008
DB2 database.
Environment Details UAT BOX
BOXI 3.1product version 12.2.0.290
Crystal Reports 2008
DB2 database.
ISSUE Desc:
1. I have designed a crystal reports in whih I have two parameters of type string.
2. We are using this field to take inpuit from the user as a date field i.e. stardate and enddate in dd/mm/yyyy format (because Crystal default format is mm/dd/yyyy)
3. converting this string in crystal to date type using Date() function.
4. We are retrieving the records between startdate and enddate.
5. This reports works as per our expectation in Crystal Report and on our DEV BOXI. i.e viewing and scheduling from CMC works fine.
But doesnt on our UAT BOX.
1. Report viewing from CMC works but when we are scheduling the reports for same date the instance success but they show report without data. There is no error while scheduling.
2. Now, If I open the instance and try to reenter the startdate and enddate again having same date, then the instance show me the data.
the dd/mm/yyyy format is working while viewing on UAT but mm/dd/yyyy format is working for scheduling.
I am not able to understand why this is happening.
Can any SAP member help me out please.
Regards,
Jon

similiar problem here
Incorrect date format in Crystal Report XI

Salesforce and Crystal Reports XI Release 2 Full build with Service Pack 2

Hi
I need to install 'Crystal Reports XI Release 2 Full build with Service Pack 2' (CR XI R2 SP2) on a new computer but can't find the exe/zip file used previously to do that.
The reason I need that particular version is because (as I understand it) its the version needed to interface with our Salesforce application.
I have the CRXI original disks and keycode but as I understand it no manner of patching with SPs will get me to CR XI R2 SP2.
I've tried various searches and frustratingly come up with only dead links (old BO forums and SAP forums).
Is there a live link somewhere that I can use, or will a later version do the job?
For example, alternatively, will I be able to use the CR XI R2 SP4 file instead?
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
Thanks for your help.

Post Author: ejthunder
CA Forum: Deployment
Hello,
Crystal Reports XI and XI R2 are not supported on 64 bit machines. I have not heard of any plans to change this. As you've discovered - the only version of Crystal Reports that is supported on a 64 bit machine is CR.NET 2005 (v10.2), the version that ships with VS2005.
Your options are to downgrade your application to use bundled CR.NET 2005 or to deploy your CR XI R2 .NET application to a 32 bit machine.
EJ

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

11i EBS XML Publisher Report with Multiple Data Source

I need to create XML Publisher report in 11i EBS pulling data from another 10.7 EBS Instance as well as 11i EBS in single report.
I am not allowed to create extract or use db links.
My problem is how to create Data Source Connection using Java Concurrent Program.
The approach I am trying is
1. create Java concurrent program to establish connection to 10.7 instance.
2. Will write the SQL queries in Data Tempalete with 2 Data Source 1 for 11i EBS and 2 for 10.7 EBS
3. Template will show the data from both query in 1 report..
Is there any other way to proceed using datasource API...
thanks

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

Crystal Reports XI R2 SP 6 - Issue with setting Data Source Location

Similar Messages

Maybe you are looking for