Crystal Reports XI to Crystal Reports XI Release 2

Is there an SR update to go from Crystal Reports XI to Release 2?  Or is it essentially a whole other version of the software and must be purchased seperately?
Can Crystal Reports XI Release 2, save files back to Crystal Reports XI version?
I'm supporting two applications that utilize Crystal Reports as its reporting engine.  Problem is that one uses Crystal Reports XI and the other Release 2.

Hi Wenin,
We can upgrade from Crystal XI to Crystal XI R2.
We need to have the set up  or download of  Cr Xi R2 enter the key and run the Cr Xi r2 application.
If we have requirement to run multiple applications one single machine then we can install.
Else it is recommended to have one version of crystal on client machine.
Bcoz both versions  will have same registry keys and .dll files .
So, be aware and can run the 2 crystal applications easily.
Thanks,
Naveen.

Similar Messages

  • Crystal reports 2008 Fix Pack 2.4 Release Notes

    It seems to be impossible to find any release notes for any of the fix packs. Can anyone point me to them?
    Also if it's anyone from SAP reading this why are release notes not distributed in the downloads section or a link to them. It's a ridiculous situation not being able to find them, how are we meant to know if issues are fixed we raise or about fixes we should be installing and are not even aware of.

    Filtering by Crystal Reports | Crystal Reports 2008, I see the items listed below.  I cannot find any release notes.
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.4 - Click Once
    ZIP
    50.372
    Windows
    English
    22.01.2010
    Crystal Reports 2008
    Hot Fix
    Crystal Reports 2008 SP2 - Fix Pack 2.4
    ZIP
    254.688
    Windows
    English
    22.01.2010
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.4 - Redist Install
    ZIP
    84.228
    Windows
    English
    22.01.2010
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.4 - Merge Modules
    ZIP
    117.236
    Windows
    English
    22.01.2010
    Crystal Reports 2008
    Other
    Crystal Reports 2008 SP1 - Hungarian Language Pack
    ZIP
    13.008
    Windows
    English
    04.01.2010
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.3 - Redist Install
    ZIP
    84.136
    Windows
    English
    30.12.2009
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.3 - Click Once
    ZIP
    50.292
    Windows
    English
    21.12.2009
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.3 - Merge Modules
    ZIP
    117.024
    Windows
    English
    21.12.2009
    Crystal Reports 2008
    Hot Fix
    Crystal Reports 2008 SP2 - Fix Pack 2.3
    EXE
    175.176
    Windows
    English
    18.12.2009
    Crystal Reports 2008
    Utility
    Crystal Reports 2008 Fix Pack 2.2 - Merge Modules
    ZIP
    114.168
    Windows
    English
    03.12.2009

  • Standard Report layouts in Crystal 2008 for SBO 2007A

    It has been 2 years since SBO adopted Crystal Reports to become part of the standard product, I refer back to the initial links which promised links to Standard Reports, however 2 years later these links appear to be exactly the same, no updates.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88#section12 [original link is broken]
    For SBO 8.8 there appears to be a pack of Reports available for Sales Orders, Purchase Orders etc
    I would like to know if there a pack of standard Crystal reports for SBO 2007A and if so where would we be able to find them?
    Many thanks
    Kevin West

    I found the following link
    https://websmp101.sap-ag.de/~sapidb/011000358700001094082009
    It has the following - Crystal Reports Layout - IT Invoice Layout for Release 2007 A
    An invoice layout for Italy...well done 2 years and we now have an Italian invoice

  • Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

    difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
    I think Crystl Reprt 2011 has more function, is it right?

    Hi,
    I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
    Here are few extracts from that which probably shows some light to you:
    SAP Crystal Reports 2011
    1. UI and associated processing servers remain the same as CR 2008
    2. Incremental update to CR 2008 with a few new features*
    3. Continue to provide current CR 2008 functionality as-is for existing customers
    SAP Crystal Reports for Enterprise 4.0
    1. Major update & redesign of the Crystal Reports Designer and associated processing servers
    2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
    3. Provide the foundation for all future releases of Crystal Reports
    Differences between these two releases:
    Data Source & Usage Type                                       General Recommendation
    1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
    OLAP Universe (UNX)
    2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
    3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
    4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
    SAP Strategy Management
    SAP Budget, Planning and Consolidation
    SAP Extended Analytics
    5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
    6. Business Views                                                           SAP Crystal Reports 2011
    7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
        SAP ERP/ Live Office Content/
        Enterprise search content
    Regards
    Gowtham

  • Need to copy reports from Crystal Enterprise 9 to Crystal Enterprise 11

    Please let me know to use the same crystal report 9 repository database for reports in crystal report XI version? We are having more than 700 reports in CE 9.
    As per my understanding, CE 9 stores the reports in APS_InfoObjects2 table and CE11 stores the reports in CMS_InfoObjects5 table. (The structures and the data storage machanism of these tables are not same). 
    Also let me know - How can we have the both Crytsal Report 9 and Crystal Report 11 (Release 2) designer tool on the same system?
    I was having Crystal Report 9 designer tool and after installing the Crystal Report 11 Release 2 designer tool, Crystal Report 9 has been replaced by Crystal Report 11. If I am installing the Crystal Report 9 then it display the error message like "Install cannot proceed because Crystal Report 9 9.2.25705 has been detected."
    Please help on these two issues !!

    Hi
    You can use Import Wizard  for migration of your reports.
    Please refer to Import Wizard Guide. You can download it from [here|http://help.sap.com/].
    For your second issue:  You  can use CR9 and CRXI both on the same machine however for this you need to first install CR9 and then do a separate installation of CR XI preferably on a different drive.
    Also for the error message
    - Did you do a fresh installation of CE XI or it was a upgrade installation?
    -For both the cases, open registry editor and delete the registry keys of CR9. Don't forget to take a back up of the registries before making any changes.
    Hope this helps!!!
    Regards
    Sourashree

  • Upgrade from crystal report 4 to crystal report 11

    hi,i have an old application developed use vb5.0 and crystal report 4,
    now i want to upgrade it to vb6.0 and cystall report 11, does the cystal report 4 and 11 are compatiable?

    Hello,
    Crystal Report 4.6 reports are pretty old.  There have been 3 or 4 major code rewrites to Crystal Reports between CR 4.6 to CR XI.  I think your CR 4.6 reports will run from CR XI but I can't be sure.  I haven't seen CR 4.6 in quite a few years and have never tested it.  You will probably want to update the old reports to CR XI.  To update the reports open them in CR XI and save them in the CR XI format.  Please be sure to keep back up copies of the original CR 4.6 reports.
    Your VB application will have to be migrated to a different component.  The Crystal OCX (crystl32.ocx) that was available in CR 4.6 was retired after CR8.5. In order to run your CR XI reports you'll need to migrate your VB6 application to the Report Designer Component (RDC) object model.
    There are a number of documents that will help you with the code migration.  Here are some links:
    [Migrating to the RDC in CR9|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/105181db-cb1d-2b10-38a4-b0a30e268e40] - applies to CR 9/10/11/11.5
    Upgrading from CR4.6 to CR9/10/11/11.5 is essentially the same. The above document was written for CR9 specifically; however it will work for CR10/11/11.5. You will have to make minor adjustments to account for DLL file name changes (e.g. crviewer9.dll in CR9 vs. crviewer.dll in CR10/11/11.5).
    You will also want to review the changes to [database connectivity|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0003c6cc-891e-2b10-678e-8b1a2dd96556] at runtime from earlier versions of Crystal Reports compared to CR XI.
    Here's the link to the [Online SDK Library|https://boc.sdn.sap.com/developer/library] - this includes the RDC SDK.
    [RDC 10 Sample Applications|https://smpdl.sap-ag.de/~sapidp/012002523100006012702008E/rdc10_smpl.exe].
    Please note that the RDC has been retired with the release of Crystal Reports 2008. Crystal Reports XI Release 2 (v11.5) is the last version of Crystal Reports that is shipping with the RDC. While you can migrate your application to the RDC for CR XI or CR XI R2 you may want to start planning for future releases of your application since the RDC will no longer be available. The upgrade path for the RDC is to move to the CR .NET object model.  Here is the [RDC Statement of Direction|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bd35e5-c71d-2b10-4593-d09907d95289].
    I hope this help.
    Sincerely,
    Dan Kelleher

  • Report works in Crystal Reports, but not when scheduled in Crystal Server

    Hi,
    I have a pretty simple report designed in Crystal Reports 2008. Basically it shows a list of call notes (memo field) from customer activities in our CRM system. The report works fine in Crystal reports, but when run or scheduled in Crystal Server 2008 the output is always blank. Furthermore, the page format etc. is "lost" in crystal server, so that the output is PDF of a quadratic blank sheet (not my standard A4 format)... Exporting to other formats - excel, Word etc. all gives the same result.
    I have tried to strip out various formulas, formatting etc from the report, but nothing helps. Which leads me to thinking that the real problem is that the report contains a memo field? Anyone else had this problem?
    wkr
    Claus
    Edited by: Claus Poulsen on Nov 9, 2010 3:34 PM

    Hi Claus,
    I've had issues between what Crystal does and what the Report Server does.  To resolve this, we found out Crystal Reports 2008 latest service pack has some things that will fix Server 2008 and they aren't in the latest Server update. 
    We updated Crystal Reports 2008 on our machines.  Installed the latest update for Crystal Server and then installed Crystal 2008 on the Report Server and installed the Crystal Reports 2008 update.  A lot of our compatibility issues went away after that. 
    Good luck,
    Brian

  • Views on CF Report Builder and Crystal Report

    Dear all,
    I would like to get your opinions on CF Report Builder and
    Crystal Report.
    As we all know, CF Report Builder is a new reporting tool.
    But I find it very difficult to design a complex report maybe due
    to limitation in its functionalities. Sometimes the tool shutdowns
    by itself without any warning and reason. But the output is nicely
    presented on a flash paper / pdf and it can be run on non-MS
    platforms.
    On the other hand, Crystal Report is a more matured product
    but runs only on MS platform. It is very easy to use and very
    powerful. I have been using it for almost 10 years. But the output
    is not nicely presented on the web browser unless if we purchase
    Crystal Report Enterprise to generate the report which is very
    costly.
    Can you all share your views? I need to make decision which
    tool(s) to use. Really appreciate it.
    Cheers,
    Keiko

    Hi Keiko,
    Yes, CF Report builder is new and initially there was few
    issues with this. But I guess now it's good after hotfixes.
    Well, I am using CF Report Builder. It's good for me. You can
    also design and develop complex reports, that depends upon the
    query you are writing. You can also add subreports to your main
    reports.
    Mainly CF Report is platform independent and you can also
    generate reports in PDF, EXCEL and FlashPaper.
    Crystal Report is no doubt is very good, and it's there for
    long years. I agree you can create complex reports with this, but
    you also can do the same in CF also. You are using this for last 10
    years, so I guess you should try something new and that is CF
    Report Builder and you can judge then.
    I am sure you will have fun with CF.
    Thanks
    Sankalan
    (www.mindfiresolutions.com)

  • Crystal Report Hyperlink to Sub-report or other report

    Hi,
    I would like to create a report on which the first part will show project summary page. The second part will have all project detail pages and third part with all project financial informations.
    The report should work in such a way whenever user clicks on any project at first summary page this has to jump to corresponding detail page of projects.
    I have the following question regarding design of this report.
    1. Do I need to create a saparate report as a sub report and then merge with main report in a footer section? Or is it ok to create sub-report within main report through sub-report wizard option?
    2. How can I establish hyperlink between the pages i.e. summary to detail pages?
    3. back hyperlink to first pages.
    I am expecting more information about hyperlink options within Crystal report.
    Thanks
    -Sunil Prasad

    Hi Sunil
    - For your first question: . Do I need to create a saparate report as a sub report and then merge with main report in a footer section? Or is it ok to create sub-report within main report through sub-report wizard option?
    You can create a separate report and then insert it as a subreport in the main report or create it with sub report wizard.
    Once you click on Insert -> Subreport, you can see there are two options, one is to point to an existing report and another is to create it through wizard.
    - 2. How can I establish hyperlink between the pages i.e. summary to detail pages?
    You can use the hyperlink between report objects.  Also you can apply a customized formula for this.
    Check the below SAP Notes:
    [1. 1207011 - How to create an OpenDocument link in Crystal Reports XI/XIR2 |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes]
    [2. 1212849 - How to pass a parameter value through a hyperlink from one report to another |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    For detailed information on Hyperlink Click on Crystal Reports Help Help -> Search for the keyword Hyperlink.
    You can also refer to the Crystal Reports User guide for the respective version that you are using.
    Hope this helps!!
    Regards
    Sourashree

  • Crystal Report and Dash Board Report templates

    Hi All,
    I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
    This in order to give demo to customers.
    Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
    Regards,
    Aditya

    Hi Adit,
    For CR demo, you can use this youtube CR demo:
    http://www.youtube.com/watch?v=bKLtTDNpQMM
    For the CR sample templates donwload, you can check this link:
    http://scn.sap.com/thread/1239521
    If  you want to create the template by your self, you can check this link:
    http://scn.sap.com/thread/1627677
    For dashboard sample, you can download from this link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
    JimM

  • Stock valuation Report problem in crystal

    Hello
    I have created Stock Valuation report on crystal & give parameter For Selection 'from Date' To 'To DATE'
    I maintain 'On Hand' field for quantity available in between selected period
    But Suppose I have Item code 'X01' having actual balnce qty 67 between 1 Jully 2011 To 31 jully 2011 when i run the
    report by same date it display 67 qty it right but the Item 'X01' Sold out 5 Qty on date 2 Augst and i again run the report
    between date 1 Jully 2011 and 31 jully 2011 it Show 62 qty but upto 31st Jully i have 67 Qty remaining but it show 62 this is wrong
    so how i brought 67 qty upto 31 Jully in Crystal Report  
    In Inventory audit Report it show perfect qty on date selection  but i want right value in my crystal report

    Hi,
    The on hand balance is dynamic. You can not get it from any table for historical balance.
    You have to create a temporary table to calculate from day one of inventory transaction for the item.
    Thanks,
    Gordon

  • Is it possible to programmatically replace a Sub Report in a crystal report

    We create crystal reports via the crystal report designer (not in any IDE) , and attach the reports directly to the database via stored procedures. Each report contains a page header and a page footer with patient demographic data. We distribute these reports to our customers and they may edit the templates and alter the page header and page footers specific to their needs.
    We are looking at using sub reports to build a "model" page header and page footer that would be inserted into each template at design time. What we would like to do is allow the customers to create their own sup reports to contain their custom page header / page footer and then programmatically replace the " model" sub reports with the custom sub reports. Please note that these sub reports would not contain any data access and would not be linked to the main report, rather the main report would assign the data that is displayed in the page header/page footer data to shared variables,  and the sub reports would use the shared variables as their data source to display the data.
    Is it possible to programmatically replace 1 sub report with another ? If so are there any code snippets to review -

    Yes it is. Submit your post to which ever SDK you are using into the Developer forums. But search the posts first and look in our samples. This is relatively easy to do.
    Thank you
    Don

  • Crystal 6.0 : How to hide the Page footer and Page Header of the Main Report on the Sub report.

    Post Author: pranay
    CA Forum: Crystal Reports
    Hi ,
    I have a Main report and a Sub report .  When a subreport spans across multiple pages , the page header and page footer of the main report gets displayed along with it . I want to hide the Page Footer and Page Header of the main report when a sub report is displayed . Is there any way it could be acheived in Crystal Report 6.0.

    I am assuming you are talking about the JSControl dropdown menu navigation. The easiest way to hide Community pages is to disable the Below Banner View for that navigation scheme, although it also disables the Subcommunties, Related Communities and Go up to Parent Community links. If you still want these in below the banner menu you could not display Community Pages in the "In this Community" tab and only leave the "Community Members and Knowledge Directly" link in there.
    You would think that it would be better to remove the "In this Community" tab althogether but it is tricky to remove it due to the fact that there needs to be a default horizontal menu displayed all the time. Not all Communities will have a Subcommunities or Related Communities tab so these communities would not display any below banner menus at all if there is no "In this Community" tab, which could be confusing.

  • Migrating reports from MS SQL reporting services to BO(Crystal reports)

    Hi Folks,
    I am looking to migrate my existing reporting application to BOXI and crystal reportsXI. The current reports application is build on Microsoft SQL reporting services platform. I have thousands of reports in the application and am looking for a solution to migrate all these existing reports into BO compatible format, i.e., .rpt format.
    Anyone with previous experience of this kind of migration/conversion for suggestions on the quickest and most cost effective solution.
    I do not want to be developing all the reports again on BO.
    Appreciate any kind of assistance on this.
    Thanks,
    Shetty.

    Hi Tim,
    Thanks for the reply.
    I searched the forum and found the link to [url|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/URLreporting_new.html] which specifies the process to use URL Reporting for Crystal Reports . But to implement this we have to change the architecture of our existing application as presently we are directly accessing the report in URL to run the report. I was not able to found any solution that implements this architecture.
    Does Business Object Enterprise 11.5 still supports this architecture?
    If we use the architecture specified in the above URL for URL Reporting for Crystal Reports  then how we can migrate all our reports to BOE 11.5? We have to use the Publish Wizard for that, to get the ids for our reports?
    There was a parameter APSTOKEN how can we get a token. Can it be a static token that can be used by all the users to access the reports?
    Thanks!

  • Migrating  from Crystal Reports 9 to Crystal Reports XI

    Hi,
    I have a java web project that uses Crystal Reports 9 to generate reports. I need to make my project compatible with Crystal Reports XI.
    I researched and found that Crystal reports XI does not use a report Application server however it can use tomcat, the server I am using for my project.
    I tried changing in the code as I found in the Crystal Reports XI for J2EE startup Guide from the business object website.
    However, I am getting the error: "Unable to connect to the server - Connection refused: connect-- Error code:-2147217387 Error code name:connectServer"
    Also, I want to know how to configure my database to be used in Crystal Reports and the java application.
    For Microsoft SQL 2000, I am using net.sourceforge.jtds.jdbc.Driver
    For Oracle, I am using oracle.jdbc.OracleDriver
    Thank you for your help.

    Hi,
    -I assume that you have already created an report based on JDBC connectivity and now you want to run that report from Tomcat.
    Please follow following steps to run your report from Tomcat :
    -Go to the webapps directory inside Tomcat and create a folder say 'Test'.This will your main folder from your application point of view.
    -Go to the path : C:\Program Files\Common Files\Business Objects\3.0 and copy crystalreportviewers11 folder.
    -Paste selected folder inside Test folder.Create another folder besides crystalreportviewers11 folder and name it as WEB-INF
    -Inside WEB-INF , create two more folders and name them as classes and lib.
    -Again go to the path :C:\Program Files\Common Files\Business Objects\3.0 \java and copy CRConfig.xml file and log4j.properties file.
    -Paste this file inside classes folder.
    -Copy all the JAR files from the location :C:\Program Files\Common Files\Business Objects\3.0 \java\lib and paste them inside lib folder of your application.
    -Go inside the Test folder and paste your JSP and rpt files.
    -Copy the JAR files required for JDBC (i.e ojdbc14.jar for oracle)and paste inside lib folder of your application.
    -Give the path of this file in CRConfig.xml file of your application.
    -Now you are ready to run your application.
    -Run your application using : http://localhost:8080/Test/.jsp
    Thanks,
    Chinmay

  • Report containing 15 sub reports crashing - Crystal Reports 2008

    I am using Crystal report 2008 with all latest service packs applied. I have more then 20 different reports wich work absolutely fine and never crash. One of my report contains 15 sub reports since its bringing data from 15 different queries. This consistently keeps crashing everytime I try to run it. Not sure what could be the root cause.
    We are using Postgres database and connected to it with  ODBC connection using Microsoft DSN.
    - All Subreport data is being displayed on Report Footer
    - All subreports are included in the Main report  page header section. (I have also tried doing it on report footer section but it still crashes)
    I have tried searching through the forum and did not find similar issue resolutions. Did someone face similar problems before?
    The crash message is:
    "crw32.exe has encountered a problem and needs to close. We are sorry of the inconvenience."
    Error report contains this data:
    AppName: crw32.exe      AppVer: 12.2.0.290      ModName: psqlodbc35w.dll
    ModVer: 9.0.2.0      Offset: 0004c538
    I am using Windows XP
    Crystal Report Version Details:
    CR Developer Version 12.2.0.290
    Product Type: Full
    Let me know how can I debug this issue? Any help is appreciated.

    @Don - We performed extensive testing for this crash issue and found that now this crash is not happening only in one scenario. So we have partially fixed this.
    Now the report crashes if I get disconnected from database and reconnect. This is what happens
    1. open the report in crystal report 2008
    2. try to run the report when db is connected- it works fine.
    3. Now disconnect the database (we are using ssh tunnel to connect to db so we just close the tunnel)
    4. now try to refresh the report - it fails to retrieve data.
    5. Now close the report without saving it.
    6. Now Close Crystal Report.
    7. Now Connect the DB using ssh tunnel so crystal report can connect.
    8. Now open Crystal Report
    9. Launch the target report.
    10 Preview the report - it works for first time.
    11. Now do a refresh keeping same parameters - Report crashes here.
    - I tried these steps with some of my other reports and they do not crash.
    - Now I have only one report which contains a Postgres Query with date range,order by and a union join.
    - No subreports now - I am trying to run this one subreport as a standalone report which I created from scratch(using blank report wizard) and just copied the query.
    Any more pointers would help.

Maybe you are looking for

  • HR Upgrade 4.6c to ECC 6.0

    Hi, I encounter this problems during a technical upgrade for HR from 4.6c to ECC6.0. There are some tables which were being prompted as obsolete: PB0004 PB0017 PB0019 PB0021 PB0081 PB0179 PB0374 PB0486 PB0186 Question: 1. Are these tables to be creat

  • My iphone could not be activated because the activation server is temporary unvailable

    Iphone5  ios7.1.2 my iphone could not be activated because the activation server is temporary unvailable

  • Mountain Lion probs with iPhone and Camera

    I made an update from Snow Leopard to Mountain Lion and now my laptop does not see my Canon Camera, "no camera found"  wich is not to bad, cause i can still reach it with the canon software. But when i connect my iPhone 4 is does say "no camera found

  • Exchange Services Battery Life Drain

    I have had my Samsung Galaxy Nexus for several months now.  In the last few days Exchange Srevices is eating my battery life.  I have searched on the internet for a soulution to this problem.  I have read several suggestoins, but nothing seems to be

  • Printing graphics in Adobe forms

    Hi, I have a requirement in adobe forms where I need to print graphics stored as standard text (SO10) or on document server (SE78) by calling them inside a long text. The client was doing this in legacy with SAP script and it was working fine but ado