Crystal Rpts XI runtime error

When trying to open the calendar to enter a date range in a custom report I get a runtime error: objected expected in line:78.
I installed the monthly hotfix 12 version 11.0.0.2182 but it didn't help.
I would refresh the report >> prompt for new parameters >> click calendar and receive the error.
I have a screenshot and would be more than happy to send it.

You may need to replace the pronpting folder which is present under the C:\Program Files\Business Objects\common\3.5\crystalreportviewer115 path.
This is a known issue and you should rename the existing folder as prompting_old and put the new one from a set-up(present on a machine) where this issue is not occuring.
Last option is to un-install and install the application again.
Thanks !

Similar Messages

Crystal Reports 2008 runtime error while running on Windows Server X64

I have a .NET web application compiled as X86 in Visual Studio 2008 invoking Crystal Reports 2008 SP2 that's running fine at a number of sites running Windows Server 2003 X86.

When deploying this app to Windows Server 2008 X64 I get the error message below. 

I'm aware that there is an unanswered question similar to this already in the forum but my application is compiled for X86 and I've tryed installing a variety of run times including "crruntime_12_2_mlb.msi" and "crredist2008_x86.msi".

What combination of compile and run time is needed to get around this issue?

Thanks.


ERROR MESSAGE **.

An error has occurred while attempting to load the Crystal Reports run time..

Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..

Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. .

Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..

Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..

Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required. Please go to http://www.businessobjects.com/support for more information..

Source Error: .

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. .

Stack Trace: .

[LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..

Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..

Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required. Please go to http://www.businessobjects.com/support for more information.]
 CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime() +399.
 CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +218.

[TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.].
 CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0.
 ChartsEnterprise.UI.GenReport.CreateReport(String reportname) +42.
 System.EventHandler.Invoke(Object sender, EventArgs e) +0.
 System.Web.UI.Control.OnLoad(EventArgs e) +132.
 System.Web.UI.Control.LoadRecursive() +66.
 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean .includeStagesAfterAsyncPoint) +2428.
Edited by: PSernz on Mar 25, 2010 3:58 AM

What combination of compile and run time is needed to get around this issue?
See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki. I think I may not have that wiki updated up to FP2.5, so the FP2.5 msm is here:
https://smpdl.sap-ag.de/~sapidp/012002523100002975182010E/cr2008fp25_mm.zip
msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100002975312010E/cr2008fp25_redist.zip
Check the version of the CR assemblies referenced in your project. The use the wiki above to deploy the correct runtime.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Runtime Error loading Crystal Reports 2008

Hi there
I have recently purchased online in the sap site the bundled product that includes SAP Crystal Reports and SAP Crystal Dashboard Design on the sap website. For those I received only one key code
I downloaded both products and manage to installed and load SAP Crystal Dashboard Design. I have installed SAP Crystal Reports (CR2008LPs_02142011.exe) everything goes well. When I start the program it loads for a second and then I get the following error:
u201C Runtime Error!
Program: c:\Program Files\Businessu2026
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application support team for more information.u201D
My OS is Windows 7 Enterprise 32-bit
I have tried the following:
u2022     Uninstalling and reinstalling again
u2022     Downloading the file again from the sap site in case the file was corrupted
u2022     I have uninstalled CR and download the SAP Crystal Reports trial version from SAP site
u2022     Trying to navigate to the registry to clear the registry for recent files (as I have seen in this thread Crystal Reports 2008 Runtime Error) . I get the following error message when I click on u201CHKEY_CURRENT_USER/Software/Business Objects/Suite 12.0/Crystal Reports/Recent Filesu201D. Error:
"Error opening Hey:
Crystal Reports cannot be opened
An error is preventing this key from being opened
Details: Access is denied"
I have been unsuccessful with all the above.
I would appreciate if someone could help.
Thanks in advance and regards,
Santiago

Hi Santiago,
That error suggests you are not a local PC administrator. CR installs require you use an account that can update registry keys etc.
Talk to your IT guys to give you full access to your PC or log on as the local PC Administrator and install it again.
Thank you
Don

CRYSTAL REPORT RUNTIME ERROR

HI All,
We have completed major upgrade VC++ to MSVS2010 MFC Application and Seagate CR 6.0 to CRVS2010,
I have used CR Viewer 13.0 and i have written code in C#.
when i assign & load Report using CR Viewer , i am getting runtime error, below mentioned error message,
i have installed CRVS2010 & CR .NET Frame work 4.0 ,installed in development machine. same codeing i have written in sample application ,that is working fine but my main application i have inculded my dll file then i getting in this error.
I given references below mentioned three dll files.
CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.Shared.dll
CrystalDecisions.Windows.Forms.dll
Please any one look at that message and give me solution for in this issue.
" AN Unhandled exception of type 'SYSTEM.IO.FileloadException' occurred in gpsmg32.dll
Additional information : Could not load file or assembly 'Crystaldecisions.CrystalReports.Engine, Version 13.0.200.0,Culture=neitral, Publickey Token=692fbea5521e1304' or one of its dependencies. Provider DLL failed to initialize correctly.(Exception from HRESULT : 0x8009001D)
Thanks & Regards,
Esha Abdullah M
Edited by: Esha Abdullah on Sep 21, 2011 7:44 PM

Hi Ludek,
Thank you your positive reply...
I have using Development machine, as per you suggested sample application link, i have downloaded you mentioned project (vbnet_win_SimplePreviewReport) and run the project its working fine.
i don' t know where is there problem, i have used same dll files & same coding method, but since i got error,
i think when i call that project , that time also showing error, i have installed Crystal Reports for .NET Framework 4.0 .
Please look at the below i mentioned calling menthod & code, PLEASE PROVIDE ME A SOLUTION FOR IN THIS ISSUE.
GpsMg32::REPORTVIEWER ^dlg = gcnew REPORTVIEWER(sReportPath,1,sWindowTitle,1,2);
dlg->Show();
Reportviewer. h file
REPORTVIEWER(CString sReportName,
                                      const int& nOutputTo,
                               CString sWindowTitle /=""/,
                                      short nCopies /=1/,
                               const int& nOrientation /= DMORIENT_LANDSCAPE/);
Reportviewer.cpp file
   CrystalDecisions::CrystalReports::Engine::ReportDocument^ reportDocument = gcnew CrystalDecisions::CrystalReports::Engine::ReportDocument();
                            reportDocument->Load("C:
Crystal
CRNET
vbnet_win_SimplePreviewReport
vbnet_win_SimplePreviewReport
World Sales Report.rpt");
                            crystalReportViewer1->ReportSource = reportDocument;
                            Application::DoEvents();
THANKS IN ADVANCE

Crystal report runtime error on print preview

Hi everybody
I've built a CR report based on a 'SAP B1' connection type
I pick my tables from the DBO menu and not from the B1 tables menu (not the one which is organized like the SAP main menu)
I open CR application and the report
I click on the print preview button
I enter the parameter
I enter the Company user password in the "Enter connection details below' window
After this step, I've often have a C++ runtime error
     Detail of the error message :
     TITLE : MS Visual C++ Runtime library
     Runtime error !
     Prgram : C:\Program files (x86) \business...
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     crw32.exe
Application Version:     12.2.0.290
Application Timestamp:     4a365bb5
Fault Module Name:     MSVCR80.dll
Fault Module Version:     8.0.50727.3053
Fault Module Timestamp:     4889d619
Exception Code:     40000015
Exception Offset:     000046b4
OS Version:     6.0.6001.2.1.0.16.7
Locale ID:     1033
Additional Information 1:     fbca
Additional Information 2:     4dd03cfc2bbb8ba75251d9b6c3496254
Additional Information 3:     81d9
Additional Information 4:     759284bec319ee7a483715cbc8f2c898
this erreor does not appear every time
I do not understand what makes tihs error to appear or not.
The only solution I've found so far :
Re open the report
Go to DATABASE Manue / Set Datasource location
I change the location of all the table to a new connection source.
environnement : win XP SP3 and CR 12.2.0.290 or Win 2008 serv and CR 12.2.0.290
Have you met the same problem in your editions ? Have you found any solutions ?
Thks for all answers
Edited by: Antoine TESSIER on Apr 19, 2010 11:58 AM

I am having the same problem, reloaded Crystal, tried changing database, still getting error message. I am running in Windows 7 Professional.
Description
Faulting Application Path:     C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
Problem signature
Problem Event Name:     APPCRASH
Application Name:     crw32.exe
Application Version:     12.1.3.1028
Application Timestamp:     4991a897
Fault Module Name:     MSVCR80.dll
Fault Module Version:     8.0.50727.4927
Fault Module Timestamp:     4a2752ff
Exception Code:     40000015
Exception Offset:     000046b4
OS Version:     6.1.7600.2.0.0.256.48
Locale ID:     1033
Additional Information 1:     cd41
Additional Information 2:     cd416236504bbf90e1e977a0426bc2fe
Additional Information 3:     671e
Additional Information 4:     671eefc7db4b2a40792acc9f378ae3f4

Crystal Report Runtime Error 9.0.Could not open the report

Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.N

Hi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan

Crystal Report Viewer Microsoft JScript runtime error

When I use the crystal viewer control to render a report on the screen I receive the following error message:
Microsoft JScript runtime error: Object doesn't support property or method 'isObject' ... and the following line is hilighted:
if(!bobj.isObject(json)).
Here is the markup for the test page I'm using
{<body>
<form id="form1" runat="server">
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" ReportSourceID="crSource" />
<CR:CrystalReportSource ID="crSource" runat="server">
</CR:CrystalReportSource>
</form>}
I believe I set all info on crSource correctly (report path etc ...) because If I remove the Crystal reports viewer from the page and just use the crsource (i.e crptSource.ReportDocument.ExportToHttpResponse ...) I can export the report OK. Its only when I have the crViewer on the page Is when I recieve this error.
Web Config
<assemblies>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<controls>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web" tagPrefix="CR" />
<http handlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
appsettings
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
I am using crystal reports 2008, visual studio 2008, windows 7 pro, MS Sql Server 2005, IE9
I uninstalled crystal reports, and reinstalled crystal reports 2008 sp3 (Full build) - No help
When I goto help about visual studio it says crystal reports 2008 (No specific version info)
Assembly cache on the machine has
12.0.2000.0 and 12.0.1100.00 as the vast majority ... a few (Design and Engine) have older 10.5.3700 and so forth (There are so many)
I found this problem on the web with different solutions involving frame work folder or not having IIS setup to server the crystal reports viewer ... this is happening to me on my local development machine using the ASP.Net Develepoment server included with VS2008 ..
Any help you could give me would greatly be appreciated
Thanks in advance
Kevin

Hi Kevin,
Take a look at below SAP Note.
[1531003 - Error: bobj undefined - javascript error |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333331333033303333%7D.do]
I got this result just by searching 'bobj is undefined javascript' in the top right search box.
Thanks,
Bhushan.

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

Error in Crystal Reports 2008 Runtime Version = 12.2.3.467

Dear Support Team
 
 
I am making the setup for our application using InstallShield 2010.
 
 
I recently updated the crystal reports 2008 runtime to version = 12.2.3.467.
 
 
Based on this article
 
 
 
 
Topic of the week (October 15, 2009)
 
Date time field is blank when using ADO .NET dataset and Crystal Reports 2008, Service Pack 2.0
 
This is a new issue, very specific to CR 2008 and SP 2. Date time fields are stripped out of a report (or not
 
visible), if a report is consuming a .NET dataset which contains a date time field. A technical escalation has been
 
submitted and a work-around is detailed in note number 1392258
 
 
 
Since DateTime Column was not getting displayed in the deployment machine when running the report.
 
 
So I downloaded the Crystal Report 2008 FP2.3 and merge module for the same and installed on my development machine
 
 
where I am making the Setup.
 
 
I am able to make the setup successfully without errors, but when I try to install the setup on the deployment machine I am getting
 
the errors as
 
 
Error 1904.Module C:\Program Files\BusinessObjects\BusinessObjects Enterprise 12.0\win32_x86\CEReportSource.dll
 
failed to register
 
Same message pops up for N number of Crystal Dlls with message failed to register.
 
Even though as per article in your forums I am doing everything right.
 
I have correct Dll for VC++ 2005
 u2022
 
Microsoft_VC80_ATL_x86.msm; version 8.0.50727.762
 
 
u2022 Microsoft_VC80_CRT_x86.msm version 8.0.50727.762
 
 
u2022 Microsoft_VC80_MFCLOC_x86.msm; version 8.0.50727.762
 
 
u2022 Microsoft_VC80_MFC_x86.msm; version 8.0.50727.762
 
 
u2022 Microsoft_VC80_OpenMP_x86.msm; version 8.0.50727.762
 
 
With exactly same versions as mentioned in the article.
 
 
I followed the article in your forum
 
Building a deployment project with Crystal Reports 2008 (12.1.0.892) SP1
 
Posted on Mar. 09, 2009 08:22 AM in Business Objects
 
The same sort of errors is coming but I am doing everything right as per that article.
 
 
To Inform you further before updating crystal reports 2008 runtime to version = 12.2.3.467.
 
 
Everything was working fine, only problem was that Date Time column was not displaying at runtime on the deployment
 
 
machine.
 
 
With Regards
 
Arshad
Edited by: arshhb on Dec 29, 2009 7:11 AM

Dear Mr. Williams
I dont think this is the issue related to MS Installer. Still based on your suggestion I downloaded the latest MS Installer from Microsoft Website and Installed on my setup machine and made the new setup with zero errors and warning.
The deployment machine is having full rights and so there is no security issues related to installation even though to clear the confusion I installed the setup on three other xp machines the result was same even after installing the latest MS installer on those machines as well.
I wanrt to remind it again since I was facing the DATE TIME column Issue problem in reports on deployment machines so I updated the Crystal Reports TO CRFP 2.3 EXE AND MSM as mentioned in your forums regarding this known bug that if datetime column is getting from dataset then that column was not getting displayed.
From that time onwards I am unable to install the setup on the deployment machines and I am getting errors unable to register errors crystal reports dlls.
Apart from that I downloaded Crystal Reports 2008 Fix Pack 2.3 - Redist Install (cr2008_fp23_redist.zip) from the download page but i can't open it I am gettinig the error message doesnt appear to be a valid archive.
Please help me and provide me some solution regardeing the issue I am stuck with.
With Regards
Arshad

Crystal 2008 Runtime error on Windows Server 2008

I have a simple ASP.Net web applications that is using reports developed in Crystal 2008. My server OS is Windows Server 2008 and has the Crystal 2008 SP1 runtime controls installed. When I run the application it works fine until I actually try to run the report. As the paremeter screen is attempting to load I am getting several script errors on the page.
_de is undefined, object not specified, bobj is undefinded are the major messages. I have researched for several hours and have had no success. I have come to the conclusion that the web page does not know where to find the .js and .css crystal files or does not have the correct permissions to access the files.
One thing that I found online and tried was to add a line of code in the HTML that specified the script as java and the location of the JS file for the viewer. This helped but still had errors.
BTW....This application runs fine on a Windows Server 2003 SP2 OS.
Anyone had the same issue? Any help is greatly appreciated!
Forgot to mention my development environment is VS 2008.
Edited by: Bobby on Mar 13, 2009 11:02 AM

See [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Also, [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note will be of help - possibly mode that the above note.
Also, make sure you are using the latest merge modules / MSI to do your deployment. See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] wiki.
Finally, the below Articles are worth having:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a
Ludek

Runtime Errors SYSTEM_RUDI_INVALID main program /CRYSTAL/PUBLISHER

Hello,
we try to publish reports with transaction /CRYSTAL/RPTADMIN.
If we publish only one report in dialog we don't have problem. Also if we publish a few report in background.
But if we try to publish more than one report in dialog (publish (F8) or overwrite (F6) we get a runtime error SYSTEM_RUDI_INVALID.
Extraction from the error:
Short text
Invalid addressig handle "RUDI_NULL".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLSH3A" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
Invalid runtime object addressed.
How to correct the error
The internal system error cannot be fixed by ABAP means only.
You may be able to find a solution in the SAP note system. If you have
access to the SAP note system, try searching for the following terms:
"SYSTEM_RUDI_INVALID" " "
"SAPLSH3A" or "LSH3AU06"
"LOGONDATA_GET_A"
Information on where terminated
Termination occurred in the ABAP program "SAPLSH3A" - in "LOGONDATA_GET_A".
The main program was "/CRYSTAL/PUBLISH_WORKER ".
In the source code you have the termination point in line 1
of the (Include) program "LSH3AU06".
We've got a Netweaver 7.02 BW system with Kernel 7.20 PL 86
We found several notes with the error SYSTEM_RUDI_INVALID, which all are related to kernel patches. But nothing which match to our problem.
Any ideas?
Best regards
Petra Wöritz

Hi,
I would suggest you open a message with support so that they can take a look at the system.
Ingo

Runtime errors "Raise_Exception" occur when running crystal report

Dear all expert,
I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
Thank You.

Hi Ingo,
I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
The readme for my transport file are as below:
There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
The dump "raise_exception" occur when in the Crystal Report Designer.
Thank You.

Crystal Reports 2008 Trial Version Runtime Error

Hello
Yesterday I've downloaded Crystal Reports 2008 (Trial Version). The installation was successful. I've got no error.
Anyway, I'm unable to start Crystal Reports. I get the following error:
Microsoft Visual C++ Runtime LIbrary
Runtime Error!
Program: ...ects\BusinessObjects Enterprise 12.0\win32x86\crw32.exe
Abnormal Program Termination
I've already tried all "solutions" mentioned in Re: Crystal Reports 2008 trial version ERROR (DEP, HW acceleration, etc.) but without success (I'm running Windows XP with SP2). I've also updated Microsoft Visual C++ 2005 resp. 2008 redistributables...
Can someone help me?
Thank you!

Hi Patrick,
Nothing Strange about it. You need local Admin rights to access registry and other parts and CR needs the same.
Check anti-virus or possibly firewall settings. When you installed did the installer ask you to allow All users to run CR?
You may want to check with your IT guys, they may have modified your local user group to not allow some rights.
Bottom kine is your PC security is blocking access that CR needs under your local user account.
When you do try to run it does UAC pop up a message to allow you to run CR Designer? If not then it may be you have customer settings for that also.
Search Microsofts site on more info on user rights.
Thanks
Don

Getting a 'Runtime Error' while launching Crystal Reports

Hello
I have Crystal Report XI R2 installed on an XP machine. However, while launching it, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program ...am Fils\Business Objects\Crystal Reports 11.5\crw32.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Any help would be appreciated.
Thanks,
Alok.

Hi Alok
Are you logged in as Administrator?
If not try logging in as Administrator,is still the issue persists then you need to manually uninstall Crystal Reports and reinstall it again.
This issue happens because the installation of Crystal Reports has not been successful, despite a message stating that it has been successfully installed.
Manual Uninstalling Process:
Symptom
Crystal Reports XI is installed on your computer. You need to manually uninstall Crystal Reports XI for one of the following reasons:
u2022 To verify that all Crystal Reports XI components have been completely removed prior to installing a later version of Crystal Reports.
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the 'Add/Remove Programs' command (Start > Settings > Control Panel).
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the Setup.exe file from Crystal Reports XI installation CD.
How do you manually uninstall Crystal Reports XI?
Resolution
Before getting started, uninstall Crystal Reports XI by launching the Setup.exe file from the installation CD or by using the 'Add/Remove Programs' command. If either of these methods fails to remove all Crystal Reports directories, files and registry keys, then continue with the resolution of this article.
==========
WARNING:
This resolution can be applied if Crystal Reports XI is the only software installed on the computer that uses the Business Objects directories, files and registry keys.
For example, Crystal Analysis, Crystal Enterprise and BusinessObjects Enterprise XI are applications that may share the same directories, files and registry keys.
Removing these directories, files and registry keys may cause other software to function incorrectly.
==========
1. To manually uninstall Crystal Reports XI, delete the following directories:
u2022 C:\Program Files\Common Files\Business Objects\3.0
u2022 C:\Program Files\Business Objects
====================
NOTE:
Do not remove the directory C:\Program Files\Common Files\Business Objects\3.0 if you have BusinessObjects Enterprise XI or Crystal Reports Server XI installed. These files are shared by both applications and removal of these files will cause Business ObjectsEnterprise XI and Crystal Reports Server XI to function incorrectly.
====================
2. Delete the following registry keys:
====================
WARNING:
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk.
HELP:
For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
RECOMMENDATION:
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
====================
u2022 HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\
u2022 HKEY_CURRENT_USER\Software\Business Objects\Suite 11.0\Crystal Reports
u2022 HKEY_USERS\S-#-#-##-...-####\Software\Business Objects\Suite 11.0\Crystal Reports
(The number signs (#) represent a series of numbers that are different on each computer.)
====================
NOTE:
After making changes to the registry, restart the affected service or application as required.
====================
Hope this Helps,
Shraddha

CREATE a crystal report (rpt) at RUNTIME programmatically

Hi,
I want to CREATE a crystal report (rpt) at RUNTIME programmatically, using only the code C#.
1- Is this possible?
2- What's the best way to do this?
Can some one help me please?

1- Is this possible?
Yes.
2- What's the best way to do this?
Using Crystal Reports InProc RAS .NET SDK.
Here is the complete sample code.
http://search.sap.com/notes?id=0001300982&boj=/sap/bc/bsp/spn/scn_bosap/notes.do?access=69765F6D6F64653D3939382669765F7361706E6F7465735F6E756D6265723D30303031333030393832
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Crystal Rpts XI runtime error

Similar Messages

Maybe you are looking for