Crystal Viewer not working with Parameterized file

When I run a classic ASP file without parameter collections, I can see Crystal Viewer with data from the db. This works fine.
If, however, I run an ASP file with parameter collections, I get static text only.
The viewer is not displaying records from the DB.
I have done researches online but can't seem to get this to work.
Any working sample of parameterized asp files will be greatly appreciated.
This is the only thing stumping me now.
Many thanks in advance for your assistance.
If you need code snips, please let me know.

Hello Simflex,
as you refer to the legacy technology VB6 I recommend to post this query to the [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs; forum.
This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, VCL, and Crystal Reports Print Engine (CRPE).
It is monitored by qualified technicians and you will get a faster response there.
Also, all Legacy Application Development SDKs queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Similar Messages

DW9 (CS3) split view not work with ASP files?

I just installed and ran DW CS3 (ver 9.0 bulid 3481) -- I use
"coder" view for the screen layout. I like the split-view style
since I code inline HTML with my ASP and ASPX code. However, the
new version has the split-screen view button grayed out. How do I
enable split view when I edit files that are not just ending in
"htm" or "html" extensions? If the Adobe programmers made an
ASSumption then they need to issue a patch and remove it pronto. I
do not want someone else making decisions on how I do my work...I
get enough of that from Microsoft already, I do not need it from my
tools also. Please forward this to the developers if there is no
way to change my preferences, otherwise please tell me how to edit
a config file or hex-edit the executable to get this funtionality
back. TIA!

I still can't figure out why the split view or design view is
grayed out and not accessible when editing files with an .asp or
.aspx extension and it is driving me crazy! I called the support
line and got someone in India who didn't understand my problem. 30
minutes later I finally got her to agree to transfer me to
secondary support but they were busy and she promised me they would
call the next day. That was over a week ago. I didn't even get a
voicemail, even though I stayed by my phone the whole day. I see
that support for DW under Adobe is no better than it was under
Macromedia...how sad. Microsoft Expression Web is looking better
and better every day....... :(

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

Same problem here...

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Crystal Report not works in JAR File

I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

Crystal Report not working in JAR File

I am using Eclipse All in one, which includes the Crystal Report... I Finished every thing and the Crystal Report is working in Eclipse.. But its not working in JAR files.. Anybody suggest me WHICH FILES SHOULD BE SET AS CLASSPATHS FOR CREATING THIS JAR FILE...
Thanks in advance

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

Validation Event Handler Not working with Flat File GTC Trusted Recon

We are created Event Handler for checking special characters in Telephone field.Its working fine when the user is created through Admin Console.but the event handler is not triggering while doing GTC Flat File Trusted recon.
Version: OIM 11.1.1.5.0
Can someone please help me out with this.
Thanks
Edited by: 790561 on 17-Feb-2013 09:01
Edited by: 790561 on Feb 17, 2013 9:35 PM
Edited by: 790561 on Feb 18, 2013 12:38 AM

Validation Event handlers will not work with your trusted recon. You can use the GTC Validation provider, it is nothing but the plugins which you can insert with in your source field in GTC. I think you can easily get the steps for how to create a custom GTC Providers.
Edited by: iam37 on Feb 16, 2013 4:09 PM

Response.Redirect not working with parameters

Response.Redirect("http://myurl/php/test.php?username=" + LoginHelper.userName + "&password=" + LoginHelper.password);
Hi All,
I am trying to redirect the user to different website with username and password. I am using the code above and passing user name and password as parameters.
This works fine on IE when i run the code on my local machine.
But when I push the code live this does not work, and user is not able to login.
It is working fine on other browsers.
Can someone please help, i am trying to wrap my head around this.
Any help would be much appreciated. Thanks in advance.

Hi SA260884,
Do you use Response.Redirect function in a asp web application? If yes, please check this sample:
https://support.microsoft.com/en-us/kb/307903?wa=wsignin1.0
If not, please make a sample html for reproducing this issue.
Best regards,
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Full-Text search is not working with PDF files - SQL Server 2012 64 bit

Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2           2014-06-04 10:11:41.393            test.docx docx
NULL   [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel Thavasi

Hello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Design View not working with skins

Hey,
Excuses, I posted this question earlier in the "general
discussion" topic.
I'm using Adobe Flex 2. I have a pretty big project. If I
open it, design view works. If I close Flex and open the same
project again, design view wont work. There aren't any
error-messages or warnings given. I have been able to track te
problem down to graphical skins in a CSS declaration. I have to
erase them, to make Design View work. Then, I paste the code back
again. This is very inconvienent. Is this a normal problem,
inherent to how Flex works. Is there an other, easier way around?
Thanks in advance!
Knut Nidelven
Here is the code that does the damage...:
.topBar {
fontFamily: Arial;
font-style: none;
fontWeight: normal;
font-size: 12px;
upSkin: Embed('assets/button_top_up.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
overSkin: Embed('assets/button_top_over.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
downSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
selectedOverSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
selectedDownSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");
selectedUpSkin: Embed('assets/button_top_selectedUp.png',
scaleGridLeft="4",scaleGridTop="4",scaleGridRight="12",scaleGridBottom="12");

VIEW | Style Rendering > Display Styles?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ganda1f" <[email protected]> wrote in
message
news:f11lt2$sv9$[email protected]..
> Hi All,
>
> Design view does not render ( just plain text, no
formating ! ) in CS3.
> So I
> loaded the same file in DW8 ( installed on same machine
) & it works fine
> !
>
> Anyone have any ideas why ?
>
> html doc is lnked via this:
>
> regards, Dave P
>
>
> <style type="text/css">
> 
> </style>
>

Project Views not working with some Workspaces

i have the effect that the project views on some workspaces are not working.
i can enable/disable >Show Categories< as usual.
when i enable it the structure of the project looks like:
myproject.jpr
|
+---Sources
| |
| +----Miscellaneous Files
| |
| +------- all my files not structured
|
+---Business Components
It does not matter what kind of Categories i choose it remains the same.
In other workspaces on the same System Tab in the same System-Navigator everything works fine.
any suggestion

restart jdev didnt help but i
removed workspace from ide and added the workspace again,
now working again

Flash Preloader Not Working with Local Files?

Hello all,
I have created a digital resumé using a Flash
presentation. The presentation links to several SWF files that are
rather large. I have designed and implemented preloaders for the
files.
My intent is to burn the whole product to CD for
distribution. The problem I am having is that my Flash preloaders
work perfectly in FireFox; I click the button in the main
presentation and the preloader comes up in the target screen,
followed by the SWF.
However, the preloaders do not work at all in IE, which
leaves a black pane with nothing in it and causes the user to click
the button several times trying to figure out why nothing is
happening.
The Flash presentation that is being displayed is embedded in
a HTML document. The user clicks a button to load a SWF to a
separate screen; the preloader runs until the file is loaded.
Any help you could provide is appreciated.

I have attached the actionscript for the data connection. The
odd thing about this issue is some of the data is being displayed
from the webservice call and then some is not. The drop down list
is not being populated but I am getting some text in a textarea
that is on the form. My datasource is a SQL Server database and in
ColdFusion administrator, I used the actual machine name to point
to the datasource because it is directly linked to my web server.
This configuration is the one giving me problems. If I change the
datasource to my test SQL Server (server.somewhere.com) it works
fine. Does this help any?

Mail conversation view not working with Listserv

Hello,
For the most part the conversation view in Apple Mail works great. The one place it does not work is for a listserv I am part of. I get a lot of emails form this group, they all come from the same address, so it is the same address in the To: field, the From: field is different for each message. I expected all the messages to be grouped by the same subject line but they are not. Other emails that I get that are NOT from a listserv group perfectly, so I feel it has to be something specific to getting emails from a listserv.

Update......Somehow Mail sent 1/46 pending messages.....weird.

Strobe Media Playback, basic code not working with FLV file?

I am trying to use the following code with Strobe Media Playback swf 1.5:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title> </title>
    <script type="text/javascript" src="scripts/swfobject.js"></script>
    <script type="text/javascript">
            var flashvars = {};
                flashvars.src = "song.flv";
                flashvars.poster = "preview.jpg";
            var params = {};
                params.movie = "StrobeMediaPlayback.swf";
                params.allowfullscreen = "false";
                params.allowscriptaccess = "always";
            var attributes = {};
            // Embed the player SWF:
            swfobject.embedSWF
                ( "StrobeMediaPlayback.swf" //swf file name
                , "videoDiv" // targeted div
                , "652", "366" // width, height
                , "10.1.0" // Flash version
                , "scripts/expressInstall.swf" //location of expressinstall script
                , flashvars
                , params
                , attributes
     </script></head>
<body>
    <div id="videoDiv">
        <video controls="controls" poster="preview.jpg" width="652" height="366">
            <source src="song.flv" type="video/flv" />
            <source src="song.ogg" type="video/ogg" />
        </video>
    </div>
</body>
</html>
However, the page is saying:
We are having problems with playback. We apologize for the inconvenience.
My links do not appear to be broken, I have checked them with Firebug / View Source. Has the javascript changed for Strobe 1.5?

Okay, I think I have it *partly* figured out. If I use the link from the example it works:
http://players.edgesuite.net/videos/big_buck_bunny/bbb_448x252.mp4
Does the video have to be online for it to work?

Crystal 2008 not working with outlook 2010 mapi when exporting

I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report. I have a new issue. - sort of???
Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with mapi not populating the addresses field from outlook.
To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is fix for this issue?
Fyi - this has nothing to do with the design of my report. The problem lies with how Crystal is communicating with mapi when trying to allowi a 2nd report to be exported. I am not using any outside programs, only crystal 2008 version and trying to export my report through mapi (outlook 2010 (in PDF format). As stated above with the above fixpack - I was able to restore exporting but now I can only export 1 report at a time.
When I select a 2nd report to export (after just sending out my 1st) the mapi function will not allow me to select addresses. So while the fix pack (from the website) restored some functionality it only allows 1 report at a time.

Hi Max,
It works for me. I get the Allow for 1 minute box and then I export again and same thing.... works...
I'm using Windows 7 64 bit at home. It just installed SP 1 so that may be the difference also but I don't recall this being a problem before.
I also don't see this being a CR problem, if it works once then something else is blocking the MAPI permission box. Check your anti-virus logs, could be it things a trojan is taking over your address book and blocking the second attempt. The AV logs should show you if something was blocked. Or disconnect from your network/disable network cards and disable your AV and test again.
Do you have any other tool that allows you to export? If you install Winzip or WinRAR it adds a feature that allows you to right click on any file, save the PDF to disk and then test using the zip tool to see if that works for you. If not it's definitely your AV or possibly Firewall software blocking the pop up.
Thanks again
Don

Crystal Viewer not working with Parameterized file

Similar Messages

Maybe you are looking for