Crystal XI - No Printer option shifts report to the right

Post Author: yishion
CA Forum: General
Hi all, I have encountered a problem which shifts the entire report to the right whenever I check the 'No Printer (optimize for screen display)' option in page setup. Has anyone encountered this problem and is there a working solution to this problem? Thanks in advance.

Solved my problem. I had to tweak the ODBC drivers on the server.

Similar Messages

Print Options "OK" inaccessible, off the screen.

When at my Bank I chose to print a check and when I select the print option on the checks screen the print options screen appears in the lower right hand corner and the "OK" button is not accessible.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to print out multilingual reports from the main report using Xliff temp

Hi all,
How to print out multilingual reports from the main report using Xliff temp?
When I want main report call subtemplate and finish xliff tranlation
<?for-each@section:INVOICE?><?end for-each?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if trx_number = 142 call Finnish translation and if trx_number =144,
call English translation.
<?for-each@section:INVOICE?><?end for-each?>
<?if:TRX_NUMBER=’142’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
<?if: TRX_NUMBER=’144’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Does anybody know what could be wrong?
BR
Kari

Thanks Amit,
I have two layout, main-layout and sub-layout
Main layout call subtemplate
I have registered layout and xliff-file
Main template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_MAIN.rtf      English
SUB template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_SUB.rtf      English
Translatable Template
File Name           Language      Territory
XXNS_INVOICE_SUB.rtf      English      United States
Available Translations
Language Territory Progress
English Finland Complete
If main report call subtemplate and finish xliff tranlation
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
.....end if;
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
.....end if;
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Do you it's set up problem or program problem
BR
Kari

Fonts when sending Reports via Printer Option (10g Reports / Redhat 5)

When I send a Oracle 10g report to the printer, which PPD file is it using? The printer you install on the server or the one in ORACLE_HOME/guicommon/tk/admin/PPD directory?
I installed a printer on the Linux Server and copied the file to the ORACLE_HOME/guicommon/tk/admin/PPD directory. I added some new fonts in the PPD so that the report would pick some Windows fonts that didn't exist originally on the Linux. I installed the fonts on the server and am able to see them in PDF Output options on the server.
When I send the report with the same parameters to the printer directly, it doesn't see those fonts. I only modified the PPD for that printer on ORACLE_HOME/guicommon/tk/admin/PPD directory. So I was wondering if I have to do it on the installed server file as well or not.
Any help is appreciated.
Chris

This was a response that I received from Oracle Support. Basocally, I'd have to install the font in the internal printer memory to get this to work.
Is there a way to send a Report to PDF in Oracle Forms and then at the same time once that PDF is generated, send it to the printer (without user interaction). That would take care of my problem. That would take care of my printing issue. I know PDF's work and I know I can print them displaying the fonts just fine.
Support Response:
Fonts need to be present in the PPD file as well as the internal printer memory .
Reason is as follows.
1)Based on PPD file , Font metrics will be used to create thye PS file with the correct font names.
2)When the PS file is sent to the the printer, actual fonts are not sent . Note that this is a limitation of Oracle Reports PS driver on unix and . Hence, it is required to have a printer that has the fonts installed in its memory/system.
Currently there is an internal pending enhancement request to upgrade the Postscript driver of Oracle Reports
Reference
4149510 UNIX POSTSCRIPT PRINTING ENHANCEMENTS

Print Option for Reports

Dear all,
Can any one please Mention the Steps to Set up the Print Option in the Reports
of the Apex Applications,
using Apex 3.1,Oracle 10g DB Rel2,Server 2000 OS.
Thanks in Advance
Edited by: khaja on Jan 18, 2009 12:46 PM

Hi Zameer,
Are you talking about an interactive report or a normal classic report and enabling printing on that?
You may want to have a look here: http://dgielis.blogspot.com/2007/06/testing-oracle-bi-publisher-with-apex.html
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/

Can I print 2 different reports for the same execution?

Hello all,
I currently have a test sequence that branches off into several subsequences, which branch off, etc. Currently, I have the report options filter out to only report 'pass' or 'fail' results. Even with this, my report is 90-100 pages. This is a good, very detailed report.
However(you knew there would be a 'however'), some people want a condensed version of this report, where it only lists whether the sequence itself failed, and not the individual steps within.
My question is, can I run my test and have both the detailed and compact reports run for that execution? Either that, or simply list if each sequence passes, and if it fails, then display the individual steps?
Either way would work for
me.
Thanks in advance for your help!
Dave Neumann
[email protected]

Hi,
As far as I know, TestStand does not include a built in feature to do what your are looking for. However this doesn't mean you can not do what your are looking for.
Like Zvezdana mentioned, you can either use the dll or sequence files to generate reports and you have to modify either of them to achieve what you want.
The dll generates de report faster that the sequences, however, the sequences are easier to modify. You can select the option you want from the Report Options.
If you select to use the sequences, there are two sequence files that would be called depending on the format you choose for your report. reportgen_txt.seq or reportgen_html.seq
They are located under ...\testStand\components\ni\models\testStand models\ Coy this to the
user directory (same path as above but user instead of ni) and make the changes that you need.
For your second option (only printing the details when a step fails) you can start with AddSequenceResultToReport sequence. This sequence has the code that inserts the begin and end sequence markers. You can getrid of them and this will make your report smaller. You can replace that with code that includes if your sequence passed or failed. Look under parameters for the result property. In this sequence there is a call to a subsequence that adds all the results of all the steps within the sequence. You can add a precondition to this step to execute only if the sequence failed.
There are many more things that you could do, but I hope this helps you get started. If you have specific questions once you start doing this, let me know.
I hope this helps,
Marcela.

Query to print Which Shift based on the time

Need to sort and sum data based on the shifts in our department....
First shift runs from 4:50 am to 2:45 pm, second shift runs from 3:00 pm to 1:00 am and any time in between is the break time.
I cannot get the data to print first shift , break time and second shift correctly
Sample Data :
DROP TABLE TIME_SHIFT CASCADE CONSTRAINTS;
-- TIME_SHIFT (Table)
CREATE TABLE TIME_SHIFT ( TRX_DATE DATE ) ;
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/03/2011 10:30:23', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('12/30/2011 11:40:02', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('12/30/2011 23:55:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('12/30/2011 16:54:15', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/03/2011 10:26:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/04/2011 00:30:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/04/2011 02:47:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/12/2011 15:30:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/04/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('10/04/2011 12:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into TIME_SHIFT (TRX_DATE) Values (TO_DATE('11/22/2011 03:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT TO_CHAR (trx_date, 'MM/DD/YYYY') ,TO_CHAR (trx_date, 'HH:MI:SSAM')
-- (case
-- when TO_CHAR(trx_date,'HH24:MI:SS') between '04:50:00' and '14:45:00'
-- then 'FIRST SHIFT'
-- when TO_CHAR(trx_date,'HH24:MI:SS') between '15:00:00' and '01:00:00'
-- then 'SECOND SHIFT'
-- else 'BREAK TIME'
-- end
-- ) WHICH_SHIFT
FROM TIME_SHIFT ;
Expected result :
10/03/2011        10:30:23AM     FirstShift
12/30/2011        11:40:02AM     FirstShift
12/30/2011        11:55:10PM     SecondShift
12/30/2011        04:54:15PM     SecondShift
10/03/2011        10:26:10AM     FirstShift
10/04/2011        12:30:08AM     FirstShift
10/04/2011        02:47:08AM     BreakTime
10/12/2011        03:30:08PM     SecondShift
10/04/2011        12:00:00AM     SecondShift
10/04/2011        12:00:00PM     FirstShift
11/22/2011        03:00:00AM             BreakTimeThanks for the help in advance.

Hi,
In everyday speech, when we hear "Between 3:00 PM and 1:00 AM", we understand that it means one range of 10 consecutive hours. That's not how the SQL BETWEEN operator works, however. "x BETWEEN y AND z" in SQL is exactly equivalent to "x >= y AND x <= z". If y < z, it never be TRUE.
Here's one way to do what you want:
SELECT     TO_CHAR (trx_date, 'MM/DD/YYYY')
,     TO_CHAR (trx_date, 'HH:MI:SSAM')
,     CASE
         WHEN TO_CHAR (trx_date, 'HH24:MI:SS') BETWEEN '04:50:00'
                                              AND         '14:45:00'
         THEN 'FIRST SHIFT'
         WHEN TO_CHAR (trx_date, 'HH24:MI:SS') BETWEEN '01:00:01'
                                              AND         '14:59:59'
         THEN 'BREAK TIME'
         ELSE 'SECOND SHIFT'
     END               AS which_SHIFT
FROM      time_shift
; This is close to what you tried, which was
(1) see if it's First Shift
(2) if not (1), see if it's Second Shift
(3) if not (1) or (2), it must be Break time
The problem with that is that, as far as SQL is concerned, going just by HH24:MI:SS, the Second shiift is two disjoint periods, and you have to test for each one separately. The query above reverses the last two tests:
(1) see if it's First Shift
(2) if not (1), see if it's Break Time
(3) if not (1) or (2), it must be Second Shift
It would be a little more coding, but perhaps clearer, to do it this way
,     CASE
         WHEN TO_CHAR (trx_date, 'HH24:MI:SS') BETWEEN '04:50:00'
                                              AND         '14:45:00'
         THEN 'FIRST SHIFT'
         WHEN TO_CHAR (trx_date, 'HH24:MI:SS') BETWEEN '15:00:00'
                                              AND         '24:00:00' -- or '23:59:59', if you prefer
           OR TO_CHAR (trx_date, 'HH24:MI:SS') BETWEEN '00:00:00'
                                              AND         '01:00:00
         THEN 'SECOND SHIFT'
         ELSE 'BREAK TIME'
     END               AS which_SHIFT I wish we could mark questions as "Correct" or "Helpful". You provided a good set of sample data in a useable form (you even included DROP TABLE and COMMIT statements), you gave a clear explanation of the problem with the desirred results, and you showed what you had already tried. Lots of people who have used this forum for years haven't learned to do that yet. Keep up the good work!
Don't forget to mention which version of Oracle you're using. In this example, it may not matter. (The query above will work in Oracle 8.1 or higher.) But it never hursts o say something like "I'm using Oracle 10.2.0.3.0".
Edited by: Frank Kulash on Dec 1, 2011 12:23 PM

Not printing line in report if the field is empty

How can I avoid printing a blank line in my report if the field is blank. eg in an address you do not want blank lines.
Thank you
Michael

You need to configure the elasticty of the field and the repeating frame.
Set both to variable and the field should "collapse" if it is blank and the repeating frame will do so as well

Reader 9 - "Print" and "Open with Adobe Reader..." options are missing from the right-click menus.

Since upgrading from Reader 8 to Reader 9, Windows XP users are no longer able to right-click 1 or more PDF files from Windows Explorer and choose either "Print" or "Open with Adobe Reader...". Those options are no longer listed in the right-click menu. We have experienced this on several computers. I downgraded a PC to Reader 8, and these options re-appeared, then disappeared again when I upgraded back to Reader 9.

Could you tell me which version of Reader 9 you are installing?
Please give the exact version it is showing you from Help | About Adobe Reader.

New to Crystal, seeing duplicate records in my report of the same field

Post Author: trillium
CA Forum: General
I am new to Crystal Reports 10.   I am having to use it with Rational ClearQuest and I am seeing the same problem over and over again and I am hoping someone can help!
Some reports I have created the records in clearquest are displaying only once.   I have started a new report in crystal and for some reason when I perform the report query in rational one record is displaying 2 to three and sometimes four times even though in the database there is only one record. I have seen this in other reports I have created but I attributed it to multiple values in one field.
Any help on fixing this would be greatly appreciated, I have tried the Suppress Duplicates but it doesn't seem to help except hiding something I need.

Post Author: GraemeG
CA Forum: General
I agree with SKodidine - check your joins and selections to make sure that all variations are taken care of. Here's a simplified version of one that I messed around with for ages when I started on CR:
Table 1 - TRANSACTIONS, Item, date, warehouse, qtyITEMA   AUCKLAND          01/01/07    15ITEMA   AUCKLAND          20/01/07    10ITEMA   CHRISTCHURCH 31/01/07    25ITEMA   OTAGO                15/01/07     5
Table 2 - ITEM MASTER, Item, descriptionITEMA   WINDOW FRAME
Table 3 - ITEM/WAREHOUSE MASTER, Item, warehouse, ABC Class, unit costITEMA   AUCKLAND         MEDIUM USAGE $5.00ITEMA   CHRISTCHURCH HIGH USAGE       $5.05ITEMA   OTAGO LOW      USAGE                $5.00
The report was to show:Item, description, date, qty, movement cost
My joins were:Table 1 - Table 2 on itemTable 1 - Table 3 on item
What I got out was:ITEMA   WINDOW FRAME   01/01/07   15   $75.00ITEMA   WINDOW FRAME   01/01/07   15   $75.75ITEMA   WINDOW FRAME   01/01/07   15   $75.00ITEMA   WINDOW FRAME   20/01/07   10   $50.00ITEMA   WINDOW FRAME   20/01/07   10   $50.50ITEMA   WINDOW FRAME   20/01/07   10   $50.00ITEMA   WINDOW FRAME   31/01/07   25   $125.00ITEMA   WINDOW FRAME   31/01/07   25   $126.50ITEMA   WINDOW FRAME   31/01/07   25   $125.00ITEMA   WINDOW FRAME   15/01/07    5    $25.00ITEMA   WINDOW FRAME   15/01/07    5    $25.25ITEMA   WINDOW FRAME   15/01/07    5    $25.00
Because I didn't make the warehouse part of my Table 1 - Table 3 join, I got a report line for every warehouse in the Table 3 file.
So I changed my joins to:Table 1 - Table 2 on itemTable 1 - Table 3 on item and warehouse
What I got out was:ITEMA   WINDOW FRAME   01/01/07   AUCKLAND          15    $75.00ITEMA   WINDOW FRAME   20/01/07   AUCKLAND          10    $50.00ITEMA   WINDOW FRAME   31/01/07   CHRISTCHURCH   25   $126.50ITEMA   WINDOW FRAME   15/01/07   OTAGO                  5   $25.00
Hope the example helps.

Hp Color LaserJet CP2025n printing a yellow band down the right hand side,

I have a Hp Color LaserJet CP2025n running on a Desk top computer OS win 7 64bit, printer Serial Number [edited Serial Number by Moderator] and another number on the label CB494A, The printer has started printing a yellow band 1.5 cm wide all the way down the right hand side of the page, any ideas or suggestions much appriciated.

@T4011
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Color Laserjet 2600n cant print on Win8 even with the right driver installed!

I configured the HP Color Laserjet 2600n from TCP/IP port and dit the windows update on drives, installed my printer but it won't even print the test page. it says error printing on the print queue. I cheked the network and sharing. I checked the printer works perfectly on Win 7 but not on my hp Win8.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Question - How to Revise a Javascript for Printing a Dynamic Date in the Right Corner of the Page

Hi Everyone,
I am using Adobe Professional 8.0.
How do I revise the JavaScript (not created by me) below in order to execute the two (2) following changes:
1) Dynamic Print Date - 1.0 inch Up and 1.0 inch Over from the Right Corner of the Page.
2) Dynamic Print Date - 0.5 inch Up and 1.0 inch Over from the Right Corner of the Page.
The JavaScript I want to revise is the following:
/* Put script title here */
// Add field to each page of form
var inch = 72;
for (var p = 0; p < this.numPages; p++) {
// create rectangle quads for field
var aRect = this.getPageBox( {nPage: p} );
aRect[1] = 1.0*inch;
aRect[3] = aRect[1] - 72; // and 24 points high
// now construct text field to fill with date information
var f = this.addField("PrintField", "text", p, aRect )
f.delay = true;
f.textSize = 10;
f.textFont="Arial,Bold";
f.textColor = color.black;
f.alignment = "right";
f.readonly = true;
f.print = true;
f.hidden = true;
f.delay = false;
var myWillPrintScript = 'var f = this.getField("PrintField"); \r'
+ 'f.hidden = false; \r'
+ 'var d = new Date(); \r'
+ 'var year = d.getYear()+1900; \r'
+ 'f.value = "Print Out Date:" + (d.getMonth()+1) + "/" + d.getDate() + "/" + year; \r';
var myDidPrintScript = 'var f = this.getField("PrintField"); \r'
+ 'f.value = ""; \r'
+ 'f.hidden = true; \r';
this.setAction("WillPrint", myWillPrintScript);
this.setAction("DidPrint", myDidPrintScript);
Thank you for your help!
Tracy

this.addWatermarkFromText({
cText: util.printd("mmmm dd, yyyy", new Date()),
nTextAlign: app.constants.align.right,
nHorizAlign: app.constants.align.right,
nVertAlign: app.constants.align.bottom,
nHorizValue: -72, nVertValue: 72
Will insert the current Monday/Day/Year as a text watermark at the bottom of every page of a document, 1 inch up and 1 inch in from the right corner.

Any page I open does so with the screen shifting 25% to the right meaning I can't see all the page - how do I sort this?

When I open firefox and go to any webpage (including right now as I write this) the screen has shifted to the right and runs off screen - I'm left with a huge blank gap on the left handside of the page.
I have uninstalled and reinstalled firefox, but it hs done the same thing - although mysteriously my homepage was kept?

The Babylon Toolbar 1.1.8 extension is known to cause something like that. Disable or uninstall that add-on until the developer fixes the cause of that problem.

My 6x4 picture that I print has a margin on the right side. I have a 4500 H.P. 550 Printer

I cannot get the margin off the right side of a 4"x6" picture.

AngelJL
You may be using 4X6 tabbed photo paper.
4X6 tabbed photo paper is actually about 4X6.5 inches .
Peer closely at the paper and look for a slightly indented line across the short end. This is the "tab". It is itended as a "tab" with which you hold the paper or write on the tab.
It is a "feature" of tabbed photo paper.
It doesn't "come off" unless you cut off the end of the paper.
Reference:
Print Photos – Three Methods: Photos Creations, Windows Photo Viewer, Word
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Crystal XI - No Printer option shifts report to the right

Similar Messages

Maybe you are looking for