CrystalReportsViewer not in toolbox for Visual Studio

First, the bad news:
I am working in Visual Studio 2002 and Crystal Reports 9.
I upgraded my server to Windows Server 2003, and CR9 just does not want to work correctly in this (it does not put the dll's into the assembly).
So I have the demo version of CR12 (CR2008) and that does put the dll's into the assembly. But now I cannot find the CrystalReportsViewer control in any toolbox. I have also tried adding it into the toolbox, but it is not listed in either the COM tab or the .NET Framwork Components tab (whereas the CR9 version is listed in the framework tab).
How can I get the CrystalReportsViewer for CR12 (CR2008) into my project?

Hi Jagdip,
CR 2008 is not supported in .NET 2002. You'll have to upgrade to .NET 2005.You'll also run into problems with the version of the framework. .NET 2002 was originally using 1.0 framework so you may run into problems there.
I suggest if you are going to upgrade to CR 2008 then you should also upgrade .NET to 2005 or 2008.
From the [Platforms Doc|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0d494c2-696b-2b10-e8b5-e7083c7be019]:
Development Platforms
This section refers to the Visual Studio components that are included in Crystal Reports.
u2022
Visual Studio 2003
u2022
Visual Studio 2005
u2022
Visual Studio 2008
Thank you
Don

Similar Messages

Crystal Report not listed Add New Item for Visual Studio 2010

I just finished installing cryestal report for visual studio 2010.
During the installation a visual studio error dialog popped up "Operation cannot be completed. Access Denied", the crystal report installation continued and was informed that the installation was successful.
But on opening my visual studio project to add new item, crystal report item is not listed there.
Is there anything that needs to be done to get it listed in the Add New Item dialog for visual studio?

I wonder what file you ran to install CRVS2010? Was it the MSI as opposed to the actual install file?
The link to the correct install is here:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_13_0_2.exe
Is that the file you ran to install CRVS2010? E.g. as opposed to:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_2.zip
- Ludek

The Application Data folder for Visual Studio could not be created

Hi! My laptop was working fine but someone recently installed Malware Bytes to my laptop and supposedly found 4 problems and "fixed" them afterwards Visual Studio Professional 2013 and Chrome stopped launching. When I realized this happened I uninstalled
Malwarebytes but it was too late. Every time I tried launching Visual Studio I would get a message that said something like: "Two or more components could not be found. Please reinstall". I did a "fix" on Visual Studio but this solved nothing
only changed the message, the new message was "The Application Data folder for Visual Studio could not be created" so I uninstalled the program and all the extras I found on my Control Panel. Downloaded Visual Studio Community 2013 I'm trying to
install it but I got the same exact message again. Why is this happening? What does it mean? Before I uninstalled Visual Studio Professional 2013 I looked for ways others solved it but nothing seemed to work. Please help. Thanks!

Hello Danny,
The Malware Bytes may have already modified some files/registry values/environment variable which is used by Visual Studio and may be the setup cannot create it for you again.
Please try the workaround here in this blog:http://tutewall.com/application-data-folder-for-visual-studio-could-not-be-created/ and remember to backup your
registry key before you do any actions to the registry table.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Blend for Visual Studio's HTML/CSS WYSIWYG editor only usable for Windows 8 apps, NOT for web apps?

Hi there,
In the process of learning Visual Studio (VS) and ASP.NET, I initially thought that I could use Blend for VS's seemingly great HTML/CSS WYSIWYG editor to visually design the HTML pages and CSS for a web app developped with VS, whether it be with ASP.NET MVC
or Django (using Python Tools for Visual Studio).
But now it dawned on me that Blend for VS seems to only be meant to design HTML/CSS for native Windows
8 apps, and not
web apps.
Can someone confirm that this is indeed the case?
Thanks a lot in advance for clarifying this point for me.
PS: Maybe this a dumb newbie question, but from the outside, it seems rather counter-intuitive to offer a top-notch tool for web
standards (HTML/CSS) edition (Blend for VS), all integrated with a top-notch tool for web development (VS) but prohibiting the web developer community to leverage the productivity gains of both
the former and the integration. This is especially puzzling given that the latest components of the ASP framework (MVC, SPA projects):
- Pushes for reliance on HTML elements and CSS instead of ASP elements and Skin files;
- VS apparently also does not provide a visual design page view for ASP.MVC projects, which is sure to make many development teams wary of migrating from web forms to MVC.

I believe this the case, but I'm not familiar with asp.net development. As you point out: html is html so you can edit and copy the code. That said, the Windows Store apps forums are specifically about writing Windows Store apps. For discussion
of writing ASp.net apps and the best tools to use for that please post in the asp.net development forums on
http://asp.net.
--Rob

Not able to properly install "Tools for Apache Cordova for Visual Studio 2013"

Hi,
I am using visual studio 2013 ultimate running on a 64-bit windows 7 home premium.
When I tried to install the "Tools for Apache Cordova for Visual Studio 2013", the installation completed but showed the following error in the end. This is what the error says:
" Joyent Node.js
Invalid command line argument. Consult the Windows Installer SDK for detailed command line help. "
I thought maybe windows phone SDK 8 is not installed on my pc.( as mentioned in the requirements here: https://msdn.microsoft.com/en-in/library/dn757054.aspx). I tried to install the SDK, by choosing modify from the control panel (as
mentioned in the same link above), but it didn't show "Windows Phone SDK" on the list. And Microsoft says that you cannot install the SDK v8.0 on windows 7. Please help me with this.

OK...
1) So, how do I write JavaScript code? There is only one option when I select JavaScript form the "New Project" window and that says "Blank App (Apache Cordova)". when I try to create one it shows all these errors:
" We've detected issues with your system's environment configuration
Apple iTunes - software is missing from your computer.
WebSocket4Net - software is missing from you computer. You may also have to configure it after installation."
2) I don't have iTunes on my computer. So, Is there a way to do it without installing iTunes?
3) And I've already installed the "WebSocket4Net", using both the "vs2013_mda0.3" setup and manually. But nothing worked. So what to do about it.?

Excel Importer for Visual Studio LightSwitch 2013

Has anyone managed to get the 'Excel Importer for Visual Studio LightSwitch' extension working with Visual Studio 2013?

Hi Kevin,
I assume you mean this extension here -
http://code.msdn.microsoft.com/silverlight/Excel-Importer-for-Visual-61dd4a90
From what I can tell that does not yet support VS 2013. The source code is of course available, so you could attempt to fix it up yourself and tell us the result.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

Crystal Reports for Visual Studio 2008 - dbf

Hello,
I use both Visual Studio 2005 and 2008 on same PC. I can not work with dbf files (format foxpro2x, dbase IV) in VS 2005 and VS 2008.
Q1. Work Crystal Reports for Visual Studio 2008 with database files - dbf (version foxpro2x, dbaseIV)? I get error -
Crystal Reports ActiveX Designer
Failed to load database information
or with dbf files work only Full version of Crystal Reports?
Q2. How re-install Crystal Reports for Visual Studio 2008. In setup Add/Remove features not exist Crystal Reports check box. I only Repair/reinstall all Visual Studio but after reinstall same error
Crystal Reports ActiveX Designer
Failed to load database information
3. When I can open sample project with Crystal Reports which use Crystal Reports (dbf file) this error is displayed:
Crystal Report Viever
Failed to load database information
Details: The database DLL "crdb_p2bxbse.dlll" could not be loaded.
4. I reinstal Crystal Report in Visual Studio 2005 - same error
5. I apply hotfix Crystal Reports for .NET 2005 - SP 1 - same error
Thank You
Ludek

Hi Ludek,
1-For dbase file to work you need have permission on database files for IIS as well as user accessing the database.
2-For re-install you need to insert the CD of visual studio setup then do custom install and then try to choose crystal reports for re-installing
3-The old viewer might cause the problem. In this case can you try connecting to a blank dbase file.
and for such issues we have a special forum [here|SAP Crystal Reports, version for Visual Studio;
Thanks,
Hitesh Mangtani

Crystal report for visual studio 2005 dblogin problem

Dear Sir,
I am using Visual Studio 2005 and crystal reports for visual studio 2005 and sql server 2000.
When I am running the project from my pc where it was developed and a local server with server authentication, report is opening but from client machine there is a new screen come before opening the report asking for login issue. my reports has subreports
also.
I am using dsn file to connect with server from crystal reports where dsn file contains as follows:
[ODBC]
DRIVER=SQL Server
UID=sa
PWD=sa
DATABASE=HRISDB
WSID=S-AGD-PAY01\HRSERVER
APP=Microsoft Data Access Components
SERVER=S-AGD-PAY01\HRSERVER
so it is dynamic bcoz i need change server name sometimes. my question is when same report want show user from their pc then below screen appears:
database login
server Name: C:\program files\HRIS\HRISDB.dsn
Databse: HRISDB
user id:
PassworD:
Integrated Security: it is checked and a finish button.
(i am sorry bcoz screenshort is not attaching so I write above what in the diagloag box for you)
then i need to uncheck the use integrated security and click finish then the reports come. THis is very annoying for my clients.
Please help me how can I overcome it.
It is mentionable that I didn't use any dblogin method in my code to like setdbloginforReport(). I think there is no problem bcoz the report show correctly. Just want to know how to overcome this screen.

You know, this forum is for controls, apis, components for the user interface Windows Forms.
Unlucky enough, Microsoft does not support Crystal reports anymore for many years.
Try the Crystal reports forum for .Net
http://scn.sap.com/community/crystal-reports-for-visual-studio
Success
Cor

An error in Crystal Reports Basic for Visual Studio 2008

Greetings from Peru,
We have a problem with one of the Crystal Reports products weu2019d like you to help us with. We work with Crystal Reports Basic for Visual Studio 2008.
The error weu2019ve detected is in one of our systemu2019s reports; this report shows data inside frames. When the content to show is larger (in height) than the space left in the page, the container object of the report makes a line break keeping the title and the frame empty at the end of that page, but the information is shown in the next page. What we need is that not empty frame is displayed.
Weu2019ve tried to solve this problem by adjusting the report in different ways (by programming coding), but unfortunately this problem is related to how much data is displayed, because if this data fit in the space left in the page, the line break would not occurs and the data is shown at the end of the same page.
We hope you can help us with this issue. I look forward to your comments.

All I can think of is trying CR 2008 (v.12.x). You can obtain an eval copy from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

What are the requirements in terms of system drive for visual studio 2013

According to this thread "visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2120283-allow-users-to-install-entirely-to-another-hard-dr" it is not possible to install visual studio fully on another drive rather that
the system drive. This link "visualstudio.com/products/visual-studio-professional-with-msdn-vs#Fragment_SystemRequirements" states the system requirement for visual studio pro 2013. However can somebody clarify what is needed in terms of system drive
requirement e.g. out of the 20 gb, how much is needed on the system drive.
Thanks

Hi,
Exact space required will vary widely based on installation components chosen and what you may have already installed on your system.
And When you install your VS in another Drive and run the VS installer, you can see system requirement in installation screen.
Because my work computer only have C Drive, I test the VS2012 professional installation in my home computer E drive. The Screen below:
I think the system requirement can also display when you install VS 2013.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Crystal Reports for Visual Studio and (Wcf) Web Services

I´m evaluating Crystal reports for Visual Studio 2010. I want to read data from a (Wcf) Webservice into the predefined Reports and deliver them to the Users in an ASP.NET Application. As far as I see reading Webservices via the XML/Webservice datasource works good in the Crystal Reports 2011 Applications - But I have Problems with the Integration of the XML/Webservice datasource in the CRVS2010 Environment.
I read your Article on sdn: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13732
which helped us to enable the XML Datasource in the CRVS2010 environment on a Machine where Crystal Reports 2011 and VS2010 is installed, but this required copying DLL´s and installing the JRE.
But I´m not able to run the XML/Webservices datasource on a webserver in a ASP.NET Application where Crystal Reports 2011 is not installed (only the runtime) - the above post doesn´t help because the path structure is completely different on my machine. Is there a manual, which helps me to enable the XML datasoucre and the CRVS2010 runtime ?
I´m not sure if reading XML is the best practice for a new Project, especially after reading your article at http://forums.sdn.sap.com/thread.jspa?threadID=1952093
I´m now evaluating ADO.NET XML as mentioned in your article, but I´m not sure if this is the right decision.
Is there a a new version for Visual Studio 2010 of the u2022csharp_web_adonet.zip example ?
BTW: All examples in the Sample Code for Crystal reports for Visual Studio 2010 reference Assemblies in Version 14, which are not present on my machine. I had to find/replave 14 through 13, before they are compilable. Did I made a mistake during installation ?

Hi Henrik,
First of all you didn't make any mistake installing CRVS2010. It has assemblies with version 13.x
Now as far as patches are concerned ensure that you are on SP2. You can get runtime and patch from following:
http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support?rid=/webcontent/uuid/d01fdad8-44e5-2d10-61ad-9d2d4158f3a8
You can opt for AD.NET as one of the datasource but what is the error/ warning you get when you use Web Serive as datasource?
You can find the latest samples created for CR2008 here
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0bf8496-2a81-2b10-95ac-b1f48d5b63f5
- Saurabh

Crystal Reports for Visual Studio 2010 runtime LICENCE

I want to welcome everyone. It's my first post on this forum.
I want to provide my Windows Form application to a client. This application was written in VS 2010 and it uses SAP Crystal Reports for generating simple report.
I've read [Crystal Reports Licensing Explained|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10cd9e15-120d-2c10-3fb5-be299000b6b7&utm_source=crvs2010&utm_medium=lp&utm_campaign=licensing_explained] pdf and I've learnt that in my case redistribution of software that embeds the Crystal Reports runtime engine is free.
My question is:
Is there something else I must include in my application package for instance a licence file? Or maybe I just have to include SAP CR runtime or ask user to download it from the SAP web site and that's it?
Marcin

Hello Marcin,
Welcome.
Please note that whenever you distribute your application (which uses Crystal reports) to others who may not have Crystal designer product, you need to provide the runtimes along with the application. The runtimes provide the necessary dlls in the machine for running Crystal inside the app.
You can use an exe to install the CR runtimes and then deploy your app. OR you can include the msm files and create a deployment package.
You will get the runtimes for CR4VS2010 [here|/people/coy.yonce/blog/2010/11/12/crystal-reports-for-visual-studio-2010-production-release-now-availableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529].
You might want to check [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333833323336%7D.do] link for details.
Forgot to mention:
we have dependency on C++ runtimes. Please look at [this|Visual studio setup project with merge modules - C++ problem; thread for details or do a quick search, in this forum.
Hope it helps.
Thanks.
Edited by: A G on Dec 2, 2010 6:03 PM

Need help in creating table in crystal report for visual studio 2010

Since there is no table support in crystal report,how can I create a table in crystal report for visual studio 2010?
I have a datatable and I need to show that in crystal report in table structure.
I have tried using lines and boxes to generate the table but it is not working perfectly.
How can I export the report in excel format in read/write mode saving all the formatting in the report

Hi,
Check sample codes from following:
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
You can download the [Developer's Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm] & [API Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_apiRef_12_en.chm]
Thanks,
Saurabh

Disabling copy feature in Crystal Reports for Visual Studio 2010 SP2

Hi ,
When I tried Crystal Reports for Visual Studio 2010 SP2 , I saw a new feature which allows user to copy content of the report after selecting it. I am using .net 4.0 winform application. I want to suppress this feature. I want the selection of objects in report to work as earlier version. I could hide the copy icon in toolbar . But that doesn't change the way selections happens in the report . Please tell me how to suppress the copy feature completely when we use SP2 ?

Hi Jijo Paul,
We found a hidden method to disable the copy as it used to be. It is hidden meaning it's not supported so if you run into any problems using it or if it gets removed there is nothing we can do for you but give this a try:
// this hides the button and disables the CTRL C command
crystalReportViewer1.ShowCopyButton = false;
crystalReportViewer1.SelectionMode = CrystalDecisions.Windows.Forms.SelectionMode.None;
Thanks again
Don

CrystalReportsViewer not in toolbox for Visual Studio

Similar Messages

Maybe you are looking for