CS-15 and mac

I'm using my CS-15 with a macbook (Os-X 10.6.2). When I'm at my cottage the connection is quite weak and the modem wants to use gprs-connection, not the 3g. But sometimes (50%) it uses 3g and everything is ok, speed of the connection is even more than what is promised (with external antenna and Poynting "adapter").
The problem is, that the software for mac does not allow me to choose what type of connection is used (windows software has this option...). If I use a pc and force the modem to 3g it works.But I don't have a pc laptop and please don't say bootcamp...
The "Nokia" sofware seems to be Wellphone, but from 2005 (!!!). Latest version of Wellphone has this option (downloaded a demo) but I don't want to spend 30,-€ for it because Nokia shoud provide the update!
Any other solutions?

It looks as if the WellPhone product does not support Snow Leopard yet.  The Nokia Modem app, which appears to be based on a old Tiger based WellPhone product also does not support 10.6.  Nokia only seem interested in the low margin Windows business.

Similar Messages

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

    Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
    I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
    Any help is much appreciated.
    Thanks,
    Alex

    Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

    Airplay mirroring.
    Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
    Firewall set correctly (allow incoming...)
    When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
    Any help appreciated.

    Hi!
    I figured it out! It was a firewall issue.
    I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
    So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
    I hope that I can help some people with this info to fix the problem.

  • Flash (is it for me?), Wacom Cintiq 22HD, and Mac Mini

    I have Flash as part of the CS6 Master Suite, which I purchased primarily for InDesign, Photoshop and Premiere, but as yet I haven't opened Flash. I'm hoping someone here can save me time by advising me whether Flash is suitable for my purposes. I'm not a professional, just a keen amateur, but I do want to use quality software and equipment to do the finest job I can.
    Answers to a previous post in the Illustrator forum (Re: Animation – is Illustrator what I should be using?) suggested that I try Flash.
    Background
    I'll be using Premiere for converting my audio-visuals to HD format. Back in the 1980s I was right into three-screen slide shows. As part of the transforming, I'll be introducing a small number of video clips (hence my need for Premiere) and also short animation sequences, probably 10 seconds at most. The animation will be done by an artist friend who is keen to extend his talents into computer art. If I buy the computer (some sort of Mac), a Cintiq, load the appropriate software, and then loan it all to Steve and show him how to use it, he'll happily spend as much time as required for the animation. We're bartering: he gets to use a computer and tablet for as long as he wants, I get animation.
    A typical animation might involve Steve drawing outlines at appropriate intervals, over a background, then having the software generate the in-betweens. Watercolour-style shading (i.e. not fill-type, monotone colour) would be added, probably manually for each frame, unless the tweening can competently handle watercolour-style shading. For some of Steve's doodlings on his iPad (simplified versions of what we're aiming for), check out http://www.mediafire.com/download/sj731c17co55g5w/Steve's_iPad_Work.zip
    We're both new to this and recently spent an afternoon together looking at videos on Flash and the Cintiq. The combination looks like it will work for us, but I have a few questions which I'm hoping some of the experts on this forum can answer. A simple yes or no may save me hours of reading documentation only to find out that something won't work as I want. I'll also include some questions about the Cintiq and Mac Mini in case someone who uses them with Flash can provide answers. I live in a place where I have no access to these devices before I buy. I have to buy 'cold'. Thus my wariness.
    Please note: I'm not an artist and Steve isn't computer literate. So some of these questions might appear pretty dumb to an experienced user of Flash/Cintiq.
    Ques 1
    Is Synfig Studio (as suggested at the end of my Illustrator thread) something I should consider? Or is Flash a better bet?
    Ques 2
    Does Flash have vector tools that mimic a watercolour paintbrush like in Photoshop? Or is that not possible as a vector, and such effects have to be done outside Flash and then imported as background (or other method)?
    Ques 3
    When a Flash animation is finished, how is it exported, for example, to Premier? Do you export as h.264?
    Ques 4
    It is not clear to Steve and I after viewing three Cintiq videos, how the Cintiq interfaces to Flash. Does the Cintiq know about Flash, and appropriates certain drawing tools automatically? Or do you have to tell Flash (or the Cintiq) that this button on the Cintiq now operates this tool in Flash?
    Ques 5
    Do Flash and Cintiq work well together – and easily?
    Ques 6
    Do I need a monitor to be able to use Flash with the Cintiq? Or would a Mac Mini be a suitable computer – with the Cintiq acting as monitor? Steve won't ever be using this setup as a computer. He'll be treating the Cintiq as a canvas on which to draw and paint.
    Thanks in advance for any replies.

    Hi Guy,
    I thought I was the only one around who was old enough to have worked on wide screen multi-image slide shows!
    Flash may be the right product for you and Steve. I use Flash with an Intuos 4 tablet and it works fine. What you want to do is to search the Flash forums for references to Cintiq. There may be some problems that interfere with your intended use, or it may work exactly as you want. The important element for working with any Wacom product is to be sure that you are using the latest drivers for the Wacom product.
    If you choose to use a mac mini, get a new one, one that can use a lot of memory, you'll need it.
    You can export Flash files to video in most any file type and compression is installed on the computer. So, if you're going to use a Mac, install Quicktime Pro and you should have everything that you need.
    I have never heard of or used Synfig Studio, so I can't comment on that.
    Flash's paint tools are different from Photoshop and more similar to Illustrator's. You will have all of the flexibility of the Cintiq to control painting effects, it will take some practice, but you should be able to get the effect that you're describing.
    Hope this helps with your decision.

  • How to connect a 23" Cinema display and mac mini to an AV Receiver?

    I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end.  The AV receiver has upscaling capability so I thought I'd try again.  I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound.  The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal.  Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
    I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work?  I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
    Many thanks

    The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

  • Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

    I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

    You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
    If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
    http://rfwilmut.net/missing3

  • Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2

    I'm trying to encode an x264 codec Quicktime using AME 6.0.2.81 and Mac OS 10.8.2. I also tried it with two versions of the x264 encoder which I downloaded from here: http://www.macupdate.com/app/mac/24173/x264encoder
    This encoder works 100% fine and better than the h264 encoder when using Apple Compressor and Apple QT Pro V7. I've been however trying to transition all of my video encodes to AME due to a number of reasons: dynamic link to AE, Premiere and the interface to name a few.
    Everytime I start an encode it gives me an error and I hear that blasted sheep. lol. This is what the log displays, which is frankly probably no help to anyone.
    - Encoding Time: 00:00:00
    01/13/2013 04:48:10 PM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    I've also tried to specify the bitrate and have had no luck. Whether I specify the bitrate or not, I still get the error. The source video has been PNG sequences and ProRes movies at 1920x1080, 29.97fps. Both result in the same unknown error.
    Any suggestions? Thanks!

    I know this is pretty old now, but I thought I'd add a reply for those who are having this issue. I just had AME CC 2014 fail on me today, and this is the FIRST thing I've ever tried to render with it. I'm using a TGA sequence and exporting to an X264 codec Quicktime MOV file at 720p. I restarted a few times, repaired permissions etc. and nothing worked except for the following.
    I went to:
    Library/Preferences/Adobe/Adobe Media Encoder/8.0/
    I deleted the entire 8.0 folder (or you could delete whatever version you are having problems with). I then restarted AME and the preferences were recreated and I could successfully use the x264 codec again. Hope this helps someone.

  • Multi coloured spinning cursor and mac air keeps freezing?

    multi coloured spinning cursor and mac air keeps freezing?

    Force Quit .
    Press command + option + esc keys together at the same time for 3 seconds.  Wait.
    When Force Quit window appears, select the application if not already.
    Press Force Quit button at the bottom of the window.       Wait.
    Application will quit.
    http://support.apple.com/kb/HT3411
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US

  • Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

    We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
    For AIR : I tried the thread Re: AIR and PDF showing/silent printing

    Hey CodeMonkey & Ross,
    Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
    Thanks guys,
    Lox

  • I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

    I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

    How did you try to install ACR 8.8.  The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
    There are two charts supplied by Adobe that explain your RAW dilemma.  This one tells you what your camera needs:  http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html   This one tells you what version of software you need:  http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6.  (Congratulations on buying a new camera!)
    To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13.   Adobe caps ACR updates on version 12 at 8.5.
    The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter.  Download and install it from here for FREE:  http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890  Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use.  That includes old versions of Photoshop, Elements and Lightroom.  DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless.  There is no risk of any image quality degradation or RAW functionality.

  • Downloading of emails via webmail, iPhone and Mac Mail

    I currently access emails from my ISP via three avenues. I use webmail when I'm in the office, iPhone on the go and Mac Mail at home. However, I will end up seeing the same emails three times. Even after deleting unwanted emails from my webmail, they will still appear in iPhone and Mac Mail when I access emails and vice versa. Has this anything to do with the POP or IMAP settings? I have set my ISP email on iPhone and Mac Mail under POP. I have ever tried to change the POP to IMAP with same results.
    Any advice? Thanks.

    I am having the same issue.

  • Socket problem after upgrading to Xcode 4.2 and Mac OS 10.7.2

    Hi,
    I am writing a client app to connect to a java server using the method explained in http://developer.apple.com/library/ios/#qa/qa1652/_index.html
    Everything was working fine until I upgraded to Xcode 4.2 and Mac OS 10.7.2 yesterday.
    The server cannot read data written by the client. Attempting to read returns -1 which means end of stream.
    Any idea why this has happened?
    Thanks.

    Please ignore this post. It was a problem in my code.

  • How to share an airport disc between PC and Mac

    I am planning to buy a airport station and connect my existing USB hard disc for sharing the data wirelessly among my PC and Mac book.
    My existing USB hard disc was partitioned into two parts to cater for different formats for PC and Mac book. One of the partition is used solely for Mac for backing up by time machine. The other is for sharing.
    Please advise if this can function the same by connecting to the airport station for using wirelessly.

    My existing USB hard disc was partitioned into two parts to cater for different formats for PC and Mac book.
    If one of the partitions is formatted for NTFS, the AirPort Base Station will NOT be able to read it or share it out to network clients. The AirPort works best with drives formatted for HPS+ and will share these drives out to Macs (using AFP) and PCs (using SMB).
    One of the partition is used solely for Mac for backing up by time machine. The other is for sharing.
    Unfortunately Apple does not support Time Machine backups to AirPort Disks (USB HDDs attached to the AirPort Extreme). ref: Time Machine doesn't back up to AirPort Disks

  • I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your mac using account ***

    I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
    Does anybody have suggestions as to why this is the case?

    Understanding Home Sharing - Support - Apple
    Hope this helps.

Maybe you are looking for