CS 2 Problem with getting it to update plugin for Camera Raw

Hi,
I am feeling a little stupid today as I have to go back and use cs2 because my iMac is broken and I only have cs2 installed on my old powerbook, but as all will know cs2 does not support Nikon D300 raw files and I have tried dragging the update 3.1 into the plugin folders as well as update 3.7 but nothing is helping so I need someone else's help. So help please.
Don

Hi,
Thanks for the link I am hopeful it is going to help but my problem now is that when I bought CS2 a few years ago I upgraded from PS7 to CS2 and would you believe it when I try to reinstall CS2 it now wants this serial number for PS7 and after so many years I am not sure that I still have this program so now I am stuck between a rock and a hard place. When I purchased the upgrade I did register it with Adobe so perhaps someone out there has a suggestion of how to proceed next. It is a blue Monday indeed.
Don

Similar Messages

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas Dijokas

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

Having trouble updating the plugin for camera raw on photoshop CS2

I am having trouble updating the plugin for the camera raw on photo shop CS2. I downloaded the plugin and put it where the instructions told me but I still couldnt open raw photos. any help would be great

Use the DNG converter for the latest camera support in CS2:
Why doesn’t my version of Photoshop or Lightroom support my camera?: http://adobe.ly/ACRandDNG

Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved.

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Problem with latest OS X update. 10.10.2. Grey screen. .??

Problem with 10.10.2 update. Getting grey screen. Have tried safe boot but got same result.

Mac OS X- Gray screen appears during startup
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Facing network problem with iPhone 5s after updating it to iOS 7.1.2 .

Facing network problem with iPhone 5s after updating it to iOS 7.1.2 , using Vodafone in india. if at one place network is full then after few minutes at same place i get no network ? what can be done ?

Hi srikka,
I'm sorry to hear about the issues you've been having with the iOS 8 upgrade on your iPhone 5s; I know how frustrating that can be, especially on a device you use every day like a smartphone. If you continue to have issues with your WiFi and cellular data connections, you may find the troubleshooting steps outlined in the following articles helpful:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
iPhone cellular data connection issues - Apple Support
Regards,
- Brenden

Looking for a site that shows problems with windows patches or updates.

Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestions

Hi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Problems with getting my Ipod Touch to work on my Sony Bravia or any TV

I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson

Check connection, if you have a case on your Ipod the connection may not be good enough.

Problem with getting resized image's bytes

I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
                              byte[] bytes = FileHandler.readFile (
                                      FileHandler.PHOTOS_PATH, fileName);
                              Image img2 = Image.createImage (bytes, 0, bytes.length);
                              img2 = ImageHandler.getInstance ().resize (img2);
                                                //#benchmark1
                              bytes = ImageUtils.imageToBytes (img2);
                              img2 = Image.createImage (bytes, 0, bytes.length);
                                                //#benchmark2my imageToBytes function is as follows:
     public static byte[] imageToBytes (Image img)
          int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
          byte[] imageData = null;
          try
               img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
                       img.getHeight ());
          catch (Exception e)
          ByteArrayOutputStream baos = new ByteArrayOutputStream ();
          DataOutputStream dos = new DataOutputStream (baos);
          try
               for (int i = 0; i < imgRgbData.length; i++)
                    dos.writeInt (imgRgbData);
               imageData = baos.toByteArray ();
               baos.close ();
               dos.close ();
          catch (Exception e)
          return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PM

Hey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
        return new byte[] {
                (byte)(value >>> 24),
                (byte)(value >>> 16),
                (byte)(value >>> 8),
                (byte)value
}Good Luck!
Daniel

Problem with getting iPod to work.

I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure it out. It's a 30 GB black iPod if that helps. When I plugged it in it showed the battery symbol. When I leave it for a while it shows the Apple symbol. Then it comes up with this: http://spirrwell.webatu.com/ipod.jpg If you can help thanks in advance!
Message was edited by: Spirrwell

I figured out that it was a hard drive problem so I'll find a fix if not I guess I'm screwed.

A problem with Nokia 5530 wirmware updating! Help!

Hi all,
I have meat the problem with Nokia 5530 firmware updating: updating allways finish with the message "Downloading of the variant package failed.Most probably there is non-commercial software in your device."
Is there any solution for that problem?
Thanks and regards,
Alexander

first its ok
then
translation:
For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
Nokia Software Updater has tried downloading the software, but this is failed 4 times.
Its posible that it can be caused by a bad, slow or instable internet connection.
This failure can also occur because we have maybe a problem with our servers.
try later again
i tried it on 2 PCs one with vista and one with XP plz help me
Message Edited by progunnl on 13-Mar-2009 02:50 PM

CS 2 Problem with getting it to update plugin for Camera Raw

Similar Messages

Maybe you are looking for