CS-3 Image Viewer - works in Development system - some (not all) site failure

I've looked at a number of discussion topics on the CS-3 Image View slide-show not working on the Website. I have the AC_RunActiveContent.js file located in my Scripts folder on the Web-site.
I have correctly opperating slide-shows working on the site - one correct page is - http://www.billyandgracetea.com/Contact1.html.
One kinda flaky page is - http://www.billyandgracetea.com/Photo1.html.
And the page that totally fails is - http://www.billyandgracetea.com/Summer2010-Pics.html.
The page that totally fails - works correctly in my Development System - but fails on the Web-site. It works correctly with the Play button and also when I compile the page with the Function Key 12 (although I am asked if I want to allow the running of Active X).
The flakey page - doesn't always run through all 18 sides - sometimes running 1 thru 7, then starting back at 1, etc.
The file system for ALL html files is the same on the Web-site.
How can I fix the page that totally fails ? Is having 18 sides in the Flaky page - too many sides ?

On http://www.billyandgracetea.com/Summer2010-Pics.html
Is this path correct?
<param name="movie" value="Pictures/flashslide-3AA.swf" />
which points to
http://www.billyandgracetea.com/Pictures/flashslide-3AA.swf
File Not Found

Similar Messages

Some (not all) sites will not load properly, (such as 'Outlook', MSN, Flicker) they look as if in a ''safe'' mode'' and can't be viewed properly.

Hello! If anyone can help me, I would be very grateful!
I am unable to properly view a number of, but not all, web pages/sites.
I have tried all the recommendations I have found thus far; however, nothing resolved the issue.
I have tried: clearing catch, clearing cookies. Checked ‘’load images automatically’’. Enabled JavaScrip. Adblock is disabled. Flashblock is disabled. Everything I have is up-to-date.
Examples of, but not limited to, sites unable to view properly are: Firefox Support, MSN, Flicker, Outlook email, Yahoo.
They work fine using Explorer.
Further detail/explanation of images not showing where a image/picture should be: What I see is an opaque thin red box and in that box is a small opaque red flag.
THIS IS MOST PERPLEXING!!!

Try, as cor-el said, the extensions one by one, disable one, then enable it if the problem is not there, and disable the next extension.
(your extensions we can see in "system details")
thank you

IPhoto/viewing issues with size on some, not all, photos.

HELP!
When creating an iPhoto slideshow, I have found certain photos appear too large when "played". The photo is seen as a part and cut short to the viewer. So far my unsuccessful attempts have been:
Cropped (slide is cut down but returns to original dimensions and becomes blurry).
Exported to apps. PhotoShop and Preview and "Resized". Remains in the original dimensions with a smaller version in the middle with a large border of white.
Imported as a different size.
Reduced printing size.
The problem is how do I reduce the size of the photo without loosing the quality and is viewed in its' entirety?Mac Pro, Mac OS X (10.6.8)

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Changes in development system are not excluded

Anyone had this issue in CHARM before ?
we have SLFN - SDCR - SDMJ open for a change.
Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
Business now wants to stop this change and close SLFN.
How can I close/cancel SDMJ ?
When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
Is there a way to force close SDMJ ?
Thank you
Elena

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

After i empty trash (the secure empty doesn't work either), the system does not reclaim the free space.

After i empty trash (the secure empty doesn't work either), the system does not reclaim the free space.
I need to run the erase free space option from the disk utility every time...which is really annoying and time consuming.
Any ideas how to solve this?
Thanks in advance =)

There is a thing in iPhoto whereby the first time you delete a photo it asks if you want to delete or just remove from the album, something like that. Unfortunately it is one of these things with a "don't ask me again" checkbox. Now, "deleting" photos only removes them from the album they are in. To actually trash them I must then go to "all photos" and find them, to send them to the trash. To help find them, what I do is rename them zzz or something, so sorting them will get them to the bottom of my collection. Just maybe your photos are still lurking around?

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Flash image viewer works in preview but not online

Hi
I followed an online demo on how to get an image slideshow on my webpage using flash. It was using insert media image viewer. It all worked fine, looked great in the preview but when I put everything online I can't see it. Just an empty space were it should be. This is the site where it is
http://www.idoityourself.com.au/ if tried moving the image to different areas in case it didn't like being in a folder within a folder etc but still didnt work. Any ideas??
thanks

http://www.idoityourself.com.au/Scripts/AC_RunActiveContent.js File not found.
You have not uploaded the Scripts folder to your server which DW generated automatically for you when you inserted the Flash.

FTP to fieldpoint works in development environment but not in deployed app?

I have developed a VI which employs FTP to upload data files created by another application
embedded on a FieldPoint, not altogether unlike the "Redundant Datalogger" example VI found
in the NI Developer Zone. Unlike that example, I am not employing DataSockets, Citadel
database functionality or any other DSC functionality which I know or suspect does not work
in a deployed application without the DSC Run-Time Engine.
This VI works fine when I run it in the LabVIEW Development System (Full + RT + DSC), but
when I deploy the VI as a standalone application FTP (at least) appears to quit working.
I don't have the specific error code -- my VI re-interprets FTP errors to a novice-
friendly "check the LAN connection and/or FieldPoint power" warning and I will have to
modify the code to extract better diagnostics. I will also not be able to probe further
until I can get back to the fieldpoint, which is happily running its little app in a little
one-room water plant in the mountains. Meanwhile, is there something more fundamental (and
obvious to the veterans) which I am overlooking?
This application employs DSC security features and I have deployed it bundled with the
associated DSC files per the DSC manual instructions. All of that is apparently working fine;
the stand-alone just won't FTP to the fieldpoint while the development copy will.
Bob Miller
P.S. This VI also employs TCP to continuously communicate control and status info with the
fieldpoint, but the VI gives up on the link when FTP fails and never tries to open the TCP
path.

I will answer my own query for any casual readers. I dragged my
notebook and my carcass up into the mountains last night to attempt
to diagnose the problem. One word answer:
Firewall.
The Symantec firewall on the PC had been configured to allow Labview
to access the network via TCP (which FTP is built on), but not an
application named "Water Plant Watchdog". Reconfiguring the firewall
(a two-minute job) fixed the problem.
NI embeds a lot of "Disable Windows firewall" messages in the LabVIEW
installer and/or documentation. This is an issue for a standalone PC
connected to a fieldpoint and a dial-up ISP. So the firewall (and the
LabVIEW application) must be managed to allow each other to do their
job. Fortunately Symantec (Norton)'s firewall seems flexible enough.
Bob

Why does Build Application vi work in development environment but not in executable; error 1025

Hello,
I have an application ("A") that I am trying to build using another application ("BuildA").
I can create an application for A manually from its project using the Build Specification, and it works fine (A.exe).
Also, when I run BuildA.vi in the development environment it calls the "Build.vi" correctly and again builds application A.exe just fine.
Then, when I make BuildA an application (manually) and run BuildA.exe, I would expect it to also create A.exe just like BuildA.vi did in the development environment.
However, it fails with the error:
Code: 1025
Open VI Reference in NI_App_Builder_API.lvlib:Build (path).vi->BuildA.vi<APPEND>
VI Path: <b>C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi</b>
I noticed this thread , which looks like a similar problem, but no conclusion was reached.
Why does BuildA.vi work fine in the LabVIEW environment, but the application BuildA.exe does not work? All paths are hard-coded, so it shouldn't be a path issue.
Thanks,
-john
Solved!
Go to Solution.
Attachments:
AppBuild.zip ‏175 KB

Interesting code. I'm curious how you came to decide 324ms in your while loop, and 58 in the other, and then 5136ms at the end. In any case I suspect this has to do with this line of text in the help of the Build.vi.
If you plan to run a build specification on the LabVIEW Run-Time Engine, do not include the Build VI in any of the VIs for the build specification.
I don't fully know what this means but it might be why it isn't working.
The Build.vi opens all Context (application instances) and then looks for the one named "NI.LV.MxLvProvider". This I assume is a application instance NI uses to build applications. It then uses this and opens some other VIs in this instance for the building. The error you are getting is "Application Reference is invalid" meaning it couldn't find the NI.LV.MxLvProvider instance it needs to build. Again I believe this maybe because you are in a run-time environment and that instance doesn't exist there.
At the end of the day I'm guessing since Application Builder is not free, NI probably doesn't include it in the Run-Time engine, which is free. So you can't build the way you want. You could have and EXE running in the run-time open an instance in the development, then run your VI from there if you must make this an EXE. It maybe easier to just edit the BuildA.vi to have a "Run When Opened" so that you double click the VI and it runs which behaves like an EXE sorta.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

JQuery Cycle 2 Image Slideshow (Works (cycles) in Explorer, but not in Safari or Chrome??

I am novice designer. I copied code for Cycle2 into my head (declaration or initializer?) and body (image source) of HTML document. The slider cycles through pictures in Explorer, but not in Safari or Crome. Any help, suggestions, alternatives would be appreciated. Thank you.
I have tried
Spry Content Slideshow- trouble being responsive when resized.
FlexSlider2.2- trouble with image height/viewport sizing to big (kinda had workaround), but had trouble with getting HTML text and image together on one slide.
WOWSlider- could not get rid of the gutter/margins surrounding the slider.
Cycle2-won't work in all browsers (for me)
Here is my code (on otherwise empty HTML and CSS pages) for Cycle 2
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>HTML5 document with Cycle2</title>

<script src="http://code.jquery.com/jquery-latest.min.js">
</script>

<script src="http://cdnjs.cloudflare.com/ajax/libs/jquery.cycle2/20130409/jquery.cycle2.min.js"></script>
<style>
.cycle-slideshow, .cycle-slideshow * {
-webkit-box-sizing:border-box;
-moz-box-sizing: border-box;
box-sizing: border-box;
margin:0 auto;
width:45%; /**adjust width as required**/
.cycle-slideshow img {width: 100%;}
</style>
<title>Untitled Document</title>
<link href="css/boilerplate.css" rel="stylesheet" type="text/css">
<link href="css/stylesheet.css" rel="stylesheet" type="text/css">


<script src="css/respond.min.js"></script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="LayoutDiv1">Use Insert Panel for additional Fluid Grid Layout Div tags. Note: All Layout Div tags must be inserted directly inside the "gridContainer" div tag. Nested Layout Div tags are not currently supported. </div>
<div id="top">This is the content for Layout Div Tag "top"</div>
<div id="header">This is the content for Layout Div Tag "header"</div>
<div id="navigation">This is the content for Layout Div Tag "navigation"</div>
<div id="slider"><h1><a href="http://www.malsup.com/jquery/cycle2/">jQuery Cycle 2</a> Responsive Slideshow</h1>

<div class="cycle-slideshow"
    data-cycle-pause-on-hover="true"
    data-cycle-speed="700"
>

<img src="http://malsup.github.com/images/beach1.jpg" data-cycle-title="beach1">
<img src="http://malsup.github.com/images/beach2.jpg" data-cycle-title="beach2">
<img src="http://malsup.github.com/images/beach3.jpg" data-cycle-title="beach3">
<img src="http://malsup.github.com/images/beach4.jpg" data-cycle-title="beach4">
<img src="http://malsup.github.com/images/beach9.jpg" data-cycle-title="beach9">

</div></div>
<div id="content1">This is the content for Layout Div Tag "content1"</div>
</div>
</body>
</html>

Resize/re-scale & optimize all images for the web in your graphics editor before you insert them into your web pages. Saves bandwidth and reduces page load.
Cycle2 is a responsive slideshow. If you want all images to remain 400px and not responsive to layout, you'll need to modify the CSS code a little.
Details on using Previous & Next links are in the documentation.
http://jquery.malsup.com/cycle2/demo/prevnext.php
Nancy O.

Imported object in development system is not changeable

Hi experts,
I just transported a RFC from sandbox to development via file transfer. Once imported, the RFC is not modifiable in the development system. Why is that so? The object which are created in developement is changeable but the one transported is not.
Please guide me here.
Thanks.
Regards,
Thava

Hi,
Please make sure that the Object properties "Objects are original objects" , "Objects are modifiable" in SWCV are checked.
-Rahul

Can't open some (not all) photos in Develop

Hey all,
I'm running Lightroom 1.1 on my Powerbook G4 (1.67ghz, 2 gigs of ram).
Recently had a data base corruption problem, reverted to my backup, everything seemed fixed and working fine. However, it turns out that some files (not all) can no longer be opened in the Develop module: when I'm trying to open one of these files in develop, the preview shows but the panels remain disabled. This happens to both JPEG files from a Canon EOS 350D and to DNG files from a Leica M8. If I select another affected file in the filmstrip while this is happening, the image in the navigator changes to the preview of the newly selected file, but the image in the main viewer remains that of the first affected file selected. If I select a unaffected file from the film strip, the develop module loads properly.
I've checked the catalog's integrity, and even optimized it, but nothing helped.
The affected files are present on disk and open in Photoshop just fine, so they're not corrupted.
Any ideas on what's going on?
Thanks :)

I am having the same Problem but I have many folders in Lightroom....many are in Red type and they say File Cannot Be Opened. I went to import and imported one from external drive to the same external drive folder and it came in fine and the images now open fine in the Develop module...will I have to do that to all my folders ....Whew!!!! Will I lose all my edits? Whew!!!! Is there a better way.....Gerald

Some, not all, links not working on certain website. Links work in other browser. Any help out there?

I cannot get the login links (either of them) or a couple of other links to work in firefox 3.6.13. Other links on this page work fine and all links work fine using chrome. This is the only page I am having this issue with, any help?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Report works on development machine, but not on distributed machines

New to CR, I use VS2005 and have added a crystal report that works fine on the development computer. I use the one click deployment to distribute my application with the report on a form. When I try to populate the report, I get the following error:
System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.ReportAppServer.CommLayer, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' at CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor()
Etcu2026..
Hope someone can help.

I am looking into the merge modual from the link, hope thier are some install instructions. I am using the version of CR that is bundeled with VS2005. I did not see a serperate version for CR, Microsoft Visual here is the data from the VS2005 Help:
Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727 SP2
Installed Edition: Professional
Microsoft Visual Basic 2005   77626-009-0401054-41481
Microsoft Visual Basic 2005
Microsoft Visual C# 2005   77626-009-0401054-41481
Microsoft Visual C# 2005
Microsoft Visual C++ 2005   77626-009-0401054-41481
Microsoft Visual C++ 2005
Microsoft Visual J# 2005   77626-009-0401054-41481
Microsoft Visual J# 2005
Microsoft Visual Studio 2005 Tools for Applications   77626-009-0401054-41481
Microsoft Visual Studio 2005 Tools for Applications
Microsoft Visual Web Developer 2005   77626-009-0401054-41481
Microsoft Visual Web Developer 2005
Microsoft Web Application Projects 2005   77626-009-0401054-41481
Microsoft Web Application Projects 2005
Version 8.0.50727.762
Crystal Reports    XXXXX-XXXXXXX-XXXXXXX
Crystal Reports for Visual Studio 2005
Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)
This service pack is for Microsoft Visual Studio 2005 Professional Edition - ENU.
If you later install a more recent service pack, this service pack will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/926601
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB937061)
This Security Update is for Microsoft Visual Studio 2005 Professional Edition - ENU.
If you later install a more recent service pack, this Security Update will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/937061
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB947738)
This Security Update is for Microsoft Visual Studio 2005 Professional Edition - ENU.
If you later install a more recent service pack, this Security Update will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/947738
Edited by: Jonathan Parminter on Mar 12, 2009 1:37 PM

FM CRM_PRIDOC_READ_OW works in source system but not when executed from BW

Hello All,
I have extended an extractor in the source system by adding additional fields.
One of the FM I've used is CRM_PRIDOC_READ_OW. When I run an extraction test in the source system eveything works and data does populates into the new fields.But when I run the infopackage from the BW side, I get an error message which saids the transaction has been terminated. I've been able to trace and pinpoint the possible cause of the error. When I do not call this FM, the infopackage finishes but I do not get data for the new fields and when I do call this FM, I get the error.
Has anyone experiance this issue before?
Your assistance will be much appreciated. Here is a portion of the code I wrote:
loop at I_TABLE into l_s_ZASCRM_OPPT_I.
    lv_guid = l_s_ZASCRM_OPPT_I-GUID.
    lv_item_guid = l_s_ZASCRM_OPPT_I-ITEM_GUID.
    call function 'CRM_PRIDOC_READ_OW'
      exporting
      iv_header_guid = lv_guid
      importing
      ES_PRIDOC = ls_pridoc.
    loop at ls_pridoc-PRIC_COND into ls_pric_cond.
      if ls_pric_cond-kposn = lv_item_guid.
        case ls_pric_cond-STUNR.
          when '40'.
            l_s_ZASCRM_OPPT_I-zz_gpm_ttl_i = ls_pric_cond-kwert.
          when '55'.
            l_s_ZASCRM_OPPT_I-zz_gpd_ttl_i = ls_pric_cond-kwert.
          when '60'.
            l_s_ZASCRM_OPPT_I-zzfy_sp_i = ls_pric_cond-kwert.
          when '70'.
            l_s_ZASCRM_OPPT_I-zzfy_gpm_i = ls_pric_cond-kwert.
          when '80'.
            l_s_ZASCRM_OPPT_I-zzfy_gpd_i = ls_pric_cond-kwert.
        endcase.
      endif.
    endloop.
    append l_s_ZASCRM_OPPT_I to l_s_ZASCRM_OPPT_Itab.
    clear l_s_ZASCRM_OPPT_I.
endloop
Thanks,
Jeff

Hello Geo!
Thank you for your question. I think we mapped all the systems you show. Always the same error. Concerning your systems my transport log would say:
Source system R3DEV does not exist
We mapped this.
Any ideas? Is there maybe something in customizing to do what could be forgetten? The system is newly connected and there have never been a transport compounded to this source system before.
Best regards,
Peter

CS-3 Image Viewer - works in Development system - some (not all) site failure

Similar Messages

Maybe you are looking for