CS 4 Master, Any way to capture Desktop to Streaming Video

I just purchased and downloaded Master Collection, is there any way to capture real time streaming Desktop to video format from within the collection? Or do I have to purchase Captivate 3. Any chance that there might be a plug-in for Premiere or any of the other collection software?
I hope that say's what I need to know.                       Thank You for any Help,  Ken

No official way to do this.
AppleTV 2/3 are configured for services Apple and their commercial partners have allowed.
Best you could do would be to find an app on iOS for one of those services and Airplay to AppleTV (or from a modern Mac running Mountain Lion), however many streaming services seem to limit video Airplay to audio only.  Not sure about those you listed.
AC

Similar Messages

  • Any way to capture DOMAIN in system variable?

    Any way to capture the DOMAIN in a system variable that can be used in WebI or Universe?

    Hi. This really is an irritation. The @VARIABLE('USERDOMAIN') works fine in DeskI, but in WebI, one is prompted for the user's domain.
    Why is this? Is there a fix for this?
    The use of the USERDOMAIN is quite important to us in solving some security issues. The BOUSER and BOPASS seems to work OK
    Please can someone advise?
    Thank you in advance
    Edited by: Rob Stephenson on Nov 17, 2009 1:04 PM

  • Is there any way to capture maximized event of a Internal frame

    Is there any way top capture maximized and restore event of the Internal Frane ...
    Thanks in advancde
    Ravi

    Yes,
    Check the InternalFrameListener
    There are methods such as
    internalFrameActivated( InternalFrameEvent ife )
    internalFrameDeiconified( InternalFrameEvent ife )
    internalFrameIconified( InternalFrameEvent ife )
    etc.
    Jean-Francois Gilbert

  • Is there any way to save stills pulled from video to iphoto?

    Is there any way to save stills pulled from video to iphoto?

    Have a look at:  https://discussions.apple.com/docs/DOC-3231
    Geoff.

  • Is there any way to capture a list of the steps in editing a particular photo in a text file?

    I have just edited some photos for a friend who was short on time, and now she would like a list of the steps I took in editing.  Is there any way of listing those steps in a text file I could send her?

    Not so far as I know, into a text file. The History is not included in the metadata you can write out to XMP, so it cannot be extracted from there.  The History is embedded in a Catalog only.
    But it would be possible to Export as Catalog one sample image - or, a group of the images concerned. Your friend could open this very small catalog, and view the full History of what has been done to the selection of images it contains.
    Note: the History panel is only available in the Develop module, and you can only get into Develop when the image is not "offline". So your friend would need to get the right picture file(s) referenced into this small Catalog you supply. That can be done by re-browsing the location of the containing folder - so, it is not necessary for the images to be physically  living at the same path in both computers..
    More simply, by writing the final metadata out to the file, and sending the file along with its metadata, at least the finished adjustments can be looked at directly. You only need the Catalog with the History in order to see the sequence - and any changes of mind or explorations that have happened along the way.
    The sequence in which you set nondestructive adjustments does not technically matter; the Catalog method would mainly be of interest, to see an example of your working approach. The nice part about that, is that your friend could click through the History states and see how the image changes on screen - while also watching the sliders, tone curve etc moving around with each new step.

  • Any way to capture a screen shot on iPad?

    Anyone know if there's a way to capture a screen shot on iPad?
    Like the Print Screen button on a PC.

    Try this
    http://www.simplehelp.net/2010/04/03/how-to-take-a-screenshot-of-your-ipad/

  • HT4864 Is there any way to get my photos and videos from my old android phone to my iCloud? I'm going to but an iPhone in two weeks and desperately need to download all the info I already have... Please help!!

    Is there any way that I would be able to download my pictures and videos from my old android to my iCloud?? I'm desperate to make this happen. It is the pics of my baby girl. I have just received the iPhone so I hope to never have this problem again but I need a solution currently.... Thanks!!

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • Any way to use iPhone as a (Video) media server?

    Okay, we have an Apple TV in the living room and love it, however was wondering if there is any way to stream video to our iPhones? For watching TV other places in the house, etc. I'm not looking for HTTP streaming, unless setting that up and then connecting to the local IP works well enough.
    Seems like since iTunes is more than happy to share with the Apple TV it's running a server, and the movies/audio are already iPhone compatible it should work. I'm sure there won't be a official solution unless it's a paid app as w/a Composite AV Cable this would pretty much replace (Aside from lower resolution.) the Apple TV, but are there any apps/workarounds for this?

    Yay! Figured it out, is via a HTTP server, but it works MUCH BETTER than I anticipated.
    http://code.google.com/p/telekinesis/

  • Any way to run AGP and onboard video? k7n2g

    I wanna use my GF3-Ti500 and the IGP!!! Any way??
    Thanks!

    Quote
    backwoodz wrote: AGP Accelerated Graphics Port..........1 agp per north bridge........either external or internal......but only 1 per north bridge
    The latest AGP spec (3.0) supports multiple AGPs as an option.  Unfortunately, you don't seem to hear about this nearly as much as you hear about 8x transfer rate.  
    The bigger problem of course, is that no manufacturers seem to be taking advantage of this capability.
    nforce2 400 is the next "chipset" version, which should start showing up within a couple of months, but most likely won't have this feature either.
    With any luck, maybe we'll see dual (integrated + add-on) AGP when nforce3 (or whatever they decide to call it) hits the scene.  I wouldn't hold your breath, though.
    nvidia?  anyone listening?  Here's a great way to sell integrated graphics on enthusiast boards!  
    P.S. - throw in DVI adapter capability while you're at it  8)

  • Is there any way to save data(pictures and videos) on a iPhone 3GS with no backup and the battery needs replaced?

    I have an iPhone 3GS, the battery is dead and needs replaced. Is there any way to have the battery replaced and save all the photos and videos that are very important of family and friends that are irreplaceable on it? There has been no back up done on the phone that I know of. Thanks for any help you can give me.

    I have to think you have tried operating the iPhone with the charging cable plugged into a charger and outlet or USB.  It is likely you have tried this and it failed to operate.  Have you tried a Reset on the iPhone to see if that will cause the battery to function ling enough to do an iCloud backup or iTunes backup?

  • Iphone4 video recording......I recorded about 10 short videos.  Is there any way to combine them into one video? I might want to post on facebook, but don't want to post 10 separate videos.

    iphone4 video recording...........I recorded about 10 short video.  Is there any way to combine them into just one video?
    Thanks

    You need an app for that. Apple's iMovie app (for iPhone and iPad) does that just fine, but there may be others.

  • Any way to standardize desktop (dock, Aliases) between several Macs?

    I use 5 different Macs, and would like to make all the desktops look exactly the same. The apps are mostly the same, but I can't just use a clone of the disk because the data (and disk size) are all different. All I want is for my dock (with the folders containing aliases to apps) and other aliases to apps on the desktop to be the same on all so that everything is where I expect to find it no matter which machine I'm sitting at. Is there any such convenient solution? Other than cloning the whole disk, surely someone who manages a lab of 100 Macs for students or something like this has a clever way of deploying the same experience for multiple computers?

    I do that by syncing my laptop iCal with my iPod, and then moving my iPod to my desktop and importing the calendars. The way this works is kind of clumsy, maybe because I don't know better. But what I have to do is delete the calendars from my desktop computer that I want to update, and then import the new ones from the iPod. Then I have to reset the colors on the calendars I just imported. It's not a perfect solution, but it works well enough.

  • Is there any way to capture the output of a trnsaction

    Hi EXPERTS,
    i TRIED TO CAPTURE O/P OF TRANSACTION IW3M USING SUBMIT,
    IT WASNT SUCCESSFUL
    pLEASE SUGGEST ME SOME OTHER WAY TO DO.

    Hi,
    Did you check  spool requests -> SP02.Could you elaborate on how you came to the conclusion that it wasnt sucessfull?

  • Any way to capture a still frame as an image in Imovie HD? "Create Still Frame" just gives me short MOV files

    I'm trying to export a still from a project I'm working on so I can add some things to it in photoshop before importing it back in to the imovie project.
    It's from the end of a clip I have. I know I could just use grab and take a screen capture but the quality would be awful.
    Imovie HD has this feature, "Create Still Frame" and when I google this problem all the answers tell me to use that.
    HOWEVER: When I do use Create Still Frame, instead of giving me a JPG I can use or another image format, it creates a short 5 second .mov clip of the still. If I wanted it in movie format I'd just use the original clip, what I need is an image format!
    There doesn't seem to be an option anywhere to change what type of still frame format it uses. There must be a way to do this however, all the answers I've found say it should be JPG and I should be able to locate it then in the project package - what am I doing wrong?

    The shortest way to accomplish this is to download a copy of MPEG Streamclip as relayed by longtime iMovie Discussion Group participant AppleMan1958
    https://discussions.apple.com/message/15808352#15808352
    First, get an app called MPEG Streamclip, which is free. (google MPEG Streamclip from Squared 5)
    Open MPEG Streamclip.
    In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
    Drag this clip into MPEG Streamclip
    In MPEG Streamclip, move the playhead to the frame you want.
    In MPEG Streamclip, click FILE/EXPORT FRAME.
    Choose JPEG, TIFF, or PNG and give it a name.

  • Any way to capture scrolling marquee text and boxes that are automatically populated?

    Using Captivate 5.5 on Windows XP.
    I'm trying to record a demo that has a marquee at the top of the window that scrolls to the left (sort of like that marquee in Times Square).  Is there any setting that would capture that scrolling action?
    Also, we have screens that are completed by the system based on a user's selections on a previous page. The system completes those fields quickly, but one at a time.  Is there a setting that would show each of those fields being completed?
    Thanks in advance for your help.
    Mary

    Only using FMV full motion capture would capture your scrolling marquee.
    If the fields are being completed so quickly by the system that neither the automated Captivate capture picks them up and you cannot capture them manually, then use FMV for that as well.  Just set your preferences to 32bit FMV.  The 16 bit video capture almost always looks wrong.

Maybe you are looking for

  • Excel Services 2010 Error - "The workbook cannot be opened."

    I enabled Excel Services and added a Excel Web Access viewer to my page. It's just a simple spreadsheet (which incidentally works fine on my standalone development server) that displays the error "The workbook cannot be opened." when the page loads.

  • LACK OF CUSTOMER SERVICE by iTunes/Apple

    I have just about had it with all the problems everyone apparently is having about not being able to have iTunes connect with Music Store. Is no one from Apple or iTunes reading these? I have been up for three solid evenings trying to figure out what

  • What is the use of "Sequence"

    What is the use of "Sequence" in SAP B 1

  • Mark up files

    I used to be able to add text, comments and high light text within my files, but now when I click on the page, no edit bar comes up. Please help! I use this app for my college classes and don't want to find a new one.

  • ITunes seeks phantom files

    upgraded this AM to 9.0.2, and now iTunes is telling me it can't find 8 items to sync to my phone: "some of the items in the itunes library, including "SampleTitle", were not copied to the iPhone "iPhoneName" because they could not be found." They're