CS 4 OS Window sizing won't hold after I create a document

I just got CS 4 for one of the computers. When I create a new document, the window goes the whole size of the screen including behind my (page, colors, character, paragraph, etc. windows on the right which take up about 1.5" of the screen to the right and I want open to work with at all times).
In CS 3, when I save the document, it saves to my new window size that I make so that my widows are just the open area of the screen and not the whole screen behind my widows I keep open to work with at all times.
Now with CS 4... it won't hold even though I save the document. The document opens every time to behind my working windows.
How can I get my document to open to just the area I want it open to and I try to keep saving to and not go behind my working windows? Thanks.

I had the same problem. I'm running 10.5 but on a Motorola chip. The Firefox download page is not clear on OS and machine requirements. To fix the problem, trash the newly installed Firefox 4. Download Firefox 3.6.16 and reinstall. All of your preferences and bookmarks will still be there as they are contained in a different place. Hope this helps.

Similar Messages

  • [SOLVED] Arch won't boot after I created a separate /var parition

    Arch won't boot after I created a separate /var parition on an existing installation.And let me confess: it was maybe stupid trying to do it on an existing install.
    I edited the fstab correctly, copied the files using rsync preserving permissions. Then I kept a backup of /var using tar. Then went on to delete everything under /var, ie /var/*, the /var folder is still there. All this I did from a live CD. After that I booted into my arch linux. Here I get messages about systemd successfully finishing fsck on each of my partitions, then the screen starts blinking. And there is no more output. Pressing Ctrl+Alt+Delete causes systemd to stop its services and reboot.
    Having realized I had borked my system, I removed the /var line from fstab and restored /var from the tar file I made earlier. Again I did this from a live cd. Rebooted into my arch system, and again similar issues, namely that after fsck and messages informing a few services had started, the screen keeps blinking.
    The live cd I used for reorganizing my partitions was elementary OS freya. They have GParted in there. I also have an arch install iso lying aroung from May 2013. If necessary, I can download the latest version. I am currently typing from a Windows installation I dual boot from.
    I don't know how to extract any boot logs as I am locked out of the system. Here is my fstab in any case:
    # Filesystem information
    # /dev/sda5 LABEL=fs_root
    UUID=b9d739cf-fd8c-46dd-a919-bd827dc47c66 / ext4 rw,noatime,data=ordered 0 1
    # /dev/sda9 LABEL=fs_var
    UUID=ec0f7a49-dccd-43ab-8651-9aa3fdb41cc7 /var ext4 rw,noatime,data=ordered 0 2
    # /dev/sda2 LABEL=fs_boot
    UUID=0e8ab31a-3bda-4b85-a901-a36f21b1583d /boot ext2 rw,noatime 0 2
    # /dev/sda6 LABEL=fs_home
    UUID=d9e63c47-274e-447f-ad01-0d97afe0fd34 /home ext4 rw,noatime,data=ordered 0 2
    # /dev/sda7 LABEL=fs_swap
    UUID=7301227c-e9f3-41b8-9d0f-4cf3c159491c none swap defaults 0 0
    # /dev/sda3 LABEL=fs_win
    UUID=12B639D1B639B5D7 /fs_win ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,nofail,noauto,x-systemd.automount 0 0
    # /dev/sda3 LABEL=fs_share
    UUID=D272269772268079 /fs_share ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,noauto,nofail,x-systemd.automount 0 0
    I would greatly appreciate any help.
    Last edited by richcocoa (2015-05-03 18:04:44)

    Have you moved everything from /var to /new_var (i named it for learning purpose)? You shoud copy content from /var but not on the fly but booting from arch iso cd, and than you shoud mount your / into arch-chroot environement, mount all of your mount points and than copy content from default /var to new /var. The copying should be done with this
    cp -rax
    and you can add -v switch to verbose output. I have my own /var moved the same way.
    The simples way is:
    -boot the arch iso cd
    -mount all of your mount point (i created here in this step /new_var to move /var to a new place, and this /new_var i put in /etc/fstab as /var later)
    -copy /var to /new_var with -rax or -vrax (recursive, archive, this filesystem or verbose, recursive, archive, this filesystem switches)
    -umount all of it
    -reboot.
    Last edited by firekage (2015-05-02 07:49:20)

  • Windows 7 won't boot after hard shut down

    Earlier today while in Windows and using Steam, Windows locked up. I gave it about 30 minutes to see if it would unlock, but when it wouldn't I decided to do a hard shut off. Now when I try to boot to Windows, I'm able to select the windows disk, get to the blinking cursor that is usually right before the Windows 7 loading screen, but after the cursor the screen just stays black forever.
    I'm wondering if there is any way to try to fix this without having to reformat. Also, if reformatting is the only option, have people found that their original Windows 7 keys are reusable? I know that they key gets locked to a machine, but I don't know if it being a Mac machine has any effect on that.
    Thank you for the help.
    Also I didn't see an appropriate forum category for this. If one is more fitting than this one, I apologize.
    Message was edited by: Rweir

    “Troubleshooting Windows 7 Inside Out” Coming October from Microsoft Press by Windows 7 News Editor
    Restoring Windows from system image (requires you made a backup image first)
    http://www.winsupersite.com/win7/totw/repair.asp
    Windows Recovery Environment and Startup Repair
    http://www.winsupersite.com/win7/ff_winre.asp
    Retail version is not locked to one machine, and can be reinstalled multiple times.
    Your first thing would be to boot from Windows 7 DVD and let it attempt a repair. Not that different from Mac OS. There is also Safe Boot, chkdsk, uninstall programs and drivers, and of course you might want to install CCleaner and use that to keep temp files to a minimum and your system running smoothly.
    But instituting a backup strategy should be one of the first things to do after getting it installed and updated.

  • Windows 7 Won't Boot After Nvidia Driver Installed, MSI Gaming N770

    Hi I just bought the MSI Gaming N770 2gb and after installing the nvidia drivers, Windows 7 will not boot after my motherboard POSTs. 
    I bought this to replace an AMD card.  I uninstalled all the AMD drivers before putting in the MSI card.  I've also run the Display Driver Uninstaller in Safe Mode and everything.
    After a few hours of research, I finally came across a thread about flashing a vbios, and something about these cards not working with motherboards with UEFI bios. 
    I'm using a P8Z77-I Deluxe mini-itx board, with a Rosewill 630W psu. 
    I have both 6+2 PCI pins plugged into the two 8pin power ports on the GPU.
    Is this an issue that can be fixed with turning off secure boot? or by flashing a vbios onto the card? Or is the card a dud? Or do I have to re-install Windows. 
    If the vbios is required, are there instructions on how to flash it? I have no idea how to flash a BIOS.  Thank you!!

    Had to update BIOS. All fixed!!!! 

  • Windows xp won't boot after cloning hard drive to a bigger drive

    I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??

    wsev1955 wrote:
    I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??
    Hi,
    Can you see the new hdd in the BIOS?
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Windows 7 won't start after installing graphic driver

    hi guys
    i have a probook 4530s (i5) laptop and recently i encountered a problem with graphics.
    after installing a fresh copy of windows 7 x64, i installed lates  driver for graphics (sp55947) but after a reset, windows won't pass the first "starting windows" page unless i go to bios setting and uncheck "switchable graphics" option,
    but after that i dont have the radeon 6490m in my device manager anymore. i also tried the latest update for bios but no success with the problem..
    i hope you can help me..

    @M3is4M 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Digital Editions for Windows (.exe) won't open after download?

    I downloaded Digital Editions for Windows on my XP, but the .exe-file won't open.
    Help?

    Current versions of ADE do not support Win XP anymore.
    Mylenium

  • Windows 2000 won't boot after QuickTime 7.03 installation!!!

    Thank your VERY much Apple for messing a company computer!
    An Interactive Tuturial we bought used QuickTime, and the sound sounded like the instructor was underwater.
    I then went to this website and downloaded QuickTime 7.03, the version you PUSH with ITunes as I at first did not see your snugged away link to the stand-alone download.
    Anyways after the download, I went through the installation, which at the end prompted me to reboot.
    Well thanks Apple, now the Windows 2000 sp4, system won't boot at all!!!
    Not even in safe mode!!! Hangs during or after loading fltmgr.sys
    Not even after having bootet to the Windows 2000 installation CD-ROM and done an emergency repair!!!
    Thank your VERY much!!!
    Not only have your installation program caused a working computer to become unoperational for half a day, now it seems we have to reinstall Windows 2000, and ALL programs and their settings which were used on it, causing another half a day or more of loss work!!!
    Edited by an Apple Host

    Due the this recent catastrophic issue and other, with the official Apple Quicktime player, our company have deciced to uninstall all versions of Quicktime, mostly version 6, on our 158 PC's, and install the QuickTime Alternative instead.
    http://www.codecguide.com/about_qt.htm

  • Windows Vista won't connect after security change

    I have an AirPort Extreme base station, to which we connect using an iMac, PowerBook G4 and a Windows Vista laptop. I used to have it set to WEP, but changed it to WPA for the increased security. After the change, my PowerBook and iMac are connecting just fine, but my wife's Vista machine has been nothing but headaches. It will sometimes connect, after a bit of fighting with it, but not reliably or quickly. At the moment, it says that it is connected with local and internet access, but I can't actually access anything on the internet, and diagnosing the problem in Vista reports that a wireless network cannot be found (despite the fact that it simultaneously reports that it is connected to one).
    I know squat about Windows -- I'm a Mac guy. Anybody know how to help me fix this?
    Thanks in advance!

    No answers, but the problem seems to have disappeared. Man, I'm starting to realize how fortunate I am to have been using Macs for the last 23 years. I think Vista is going to be a very good thing for Apple! There's nothing like actually using Vista to make one want to flee screaming and never look back...

  • Windows 7 won't load after installing new Hard Drive and Recovery software

    HP G72 Notebook PC
    xz218UAR
    I guess a virus crashed my hard drive so I bought a new one.  I installed the new drive and loaded the recovery disks that I also bought from HP.  Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS.  I've tried starting over from Disk 1 but it's not doing anything different to fix it.  
    I removed the new hard drive and reinstalled it but it's still doing the same thing.  
    What am I doing wrong and HOW DO I FIX IT?

    Hi,
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
    If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Windows 7 won't boot after adding a third partition with gparted

    I needed extra space on my bootcamp partition so I :
    1. resized macintosh hd partition with disk utility
    2.booted with gparted live disk and "growed" the bootcamp partition
    Now Windows doesn't boot. Any suggestions?

    Hi,
    your Topic says '...adding a third partition' whereas in your message you don't mention this third partition...
    So what is the right one ?
    Nonetheless you might have a look at EasyBCD http://neosmart.net/dl.php?id=1 to repair the Windows 7 bootloader.
    Regards
    Stefan

  • Windows- bootcamp won't start after installing OSX Yosemite

    Hi Loner T,
    Like many people with the yosemite update, my boot camp no longer works.
    I cannot find the drive when I'm booting up.
    Startup Disk under system preferences only shows the Mac system and does not show any other option.
    I've been trying to go through what you've posted to help other people but I've never even worked with terminal application before and everything is very confusing.
    First of all here are the
    "diskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo fdisk /dev/disk0"
    commands:
    henry-tjoes-MacBook-Pro:~ henrytjoe$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            419.5 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                79.8 GB    disk0s4
    henry-tjoes-MacBook-Pro:~ henrytjoe$ diskutil cs list
    No CoreStorage logical volume groups found
    henry-tjoes-MacBook-Pro:~ henrytjoe$ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 976773167
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  819306680      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      819716320    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      820985856  155787264      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      976773120         15        
      976773135         32         Sec GPT table
      976773167          1         Sec GPT header
    henry-tjoes-MacBook-Pro:~ henrytjoe$ sudo fdisk /dev/disk0
    Disk: /dev/disk0    geometry: 60801/255/63 [976773168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  819306680] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [ 819716320 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [ 820985856 -  155787264] HPFS/QNX/AUX
    henry-tjoes-MacBook-Pro:~ henrytjoe$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
    00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
    00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 40 ef 30  |[email protected]|
    00000020  00 00 00 00 80 00 80 00  ff 1f 49 09 00 00 00 00  |..........I.....|
    00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
    00000040  f6 00 00 00 01 00 00 00  ab 11 45 ce 48 45 ce 66  |..........E.HE.f|
    00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
    00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
    00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
    00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
    00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
    000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
    000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
    000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
    000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
    000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
    000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
    00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
    00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
    00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
    00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
    00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
    00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
    00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
    00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
    00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
    00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
    000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
    000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
    000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
    000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
    000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
    000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
    00000200
    Hope you can help me, Thank You.

    The NTFS header is intact and the GPT and MBR match.
    1. What happens if you power cycle and hold the Alt key?
    2. Do you have any third-party NTFS software (Tuxera, Paragon, MacDrive, NTFS-3g, NTFSFree...)?

  • Windows 2000 won't start after iTunes 7.3 upgrade

    Yesterday I upgraded to iTunes 7.3 and after the required reboot, windows 2000 hangs on its startup screen. I can boot from the windows 2000 CD and login to the win2k installation on the hard disk using the admin password, but I don't know how to uninstall iTunes from the recovery console. Any ideas?
    Dell Dimension 4100   Windows 2000  

    Was not able to uninstall easyCD creator, but did get windows to start again by following the directions below from the website listed below. Lots of work still ahead to get it back to normal, but at least I didn't lose all my data.
    http://forums.techguy.org/windows-nt-2000-xp/127361-help-inaccessiblebootdevice-stop-0x0000007b-blue.html
    Method 1: Use a Backup Registry System Hive to Edit the Registry
    Use the Windows 2000 CD-ROM to start the computer.
    If you need a third-party hard disk controller, press S to specify an additional device, and then insert the floppy disk that contains the correct driver for the hard disk controller.
    Press R to repair a Windows 2000 installation.
    Press C to use the recovery console.
    Log on to the Windows installation that you want and type the Administrator password.
    Change to the %windir%\System32\Config\ directory. To do this, type the following command at the C:\Winnt prompt (where C: is the drive and Winnt is the directory where Windows 2000 is installed), and then press ENTER:
    chdir system32\config
    Type ren system system.old, and then press ENTER.
    Type copy C:\winnt\repair\system, and then press ENTER. The following information appears:
    1 file(s) copied.
    Type exit, and then press ENTER to quit the recovery console and restart Windows.

  • Windows 7 won't boot after I installed GRUB

    Hello,
    I just installed Arch Linux on my laptop with Windows 7. I followed the Beginners Guide. However, when I did "grub-install --target=i386-pc --recheck /dev/sda" it said something along the lines of:
    warning, no BIOS boot partition, embedding is not possible
    warning, embedding is not possible, need to use blocklists
    error, will not proceed with blocklists.
    Now, I think this was my mistake. I decided to use the --force option. Now grub works, and boots to linux, but when I try to boot to windows, windows says Windows failed to boot.
    Please help, and if I have missed any information then just ask me.
    Grub version is 2.02 beta 2-4.
    Grub is booting Windows, but Windows displays this:
    Windows failed to start. A recent hardware or software change might be the cause.
    Thanks a lot!
    Last edited by 097 (2014-07-10 22:20:23)

    Actually, there already is an entry for Windows 7. It just doesn't work. Here it is:
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-AC66E08666E0529E' {
            insmod part_gpt
            insmod ntfs
            set root='hd0,gpt1'
            if [ x$feature_platform_search_hint = xy ]; then
              search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  AC66E08666E0529E
            else
              search --no-floppy --fs-uuid --set=root AC66E08666E0529E
            fi
            chainloader +1
    ### END /etc/grub.d/30_os-prober ###
    Also, when I ran gdisk, it says this: Found valid GPT with protective MBR; using GPT.
    Can I just ignore that?
    Thank you for your help!

  • Windows- bootcamp won't start after installing OSX Yosemite - Ameriguayo

    Like so many others, I installed OSX Yosemite this morning and now Boot Camp no longer works.
    After I updated to Yosemite I restarted my computer, held down  alt, and was presented nothing but a Macintosh HD. I followed “Loner T’s” instructions. Here's my info...
    MiMac:~ Mike$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *750.2 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         351.0 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data                         397.7 GB   disk0s4
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *350.6 GB   disk1
                                     Logical Volume on disk0s2
                                     8FA5E92E-AD22-4963-A728-00057E6BEB99
                                     Unencrypted
    MiMac:~ Mike$ diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group BACE3EFD-026C-4E8C-A749-2F22BE55CD85
        =========================================================
        Name:         Macintosh HD
        Status:       Online
        Size:         350971142144 B (351.0 GB)
        Free Space:   18915328 B (18.9 MB)
        |
        +-< Physical Volume B5CB58D7-8B4E-4E8F-B676-4A3A08C4C10C
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     350971142144 B (351.0 GB)
        |
        +-> Logical Volume Family 22A44CAD-28FC-42EE-9017-FA335F527AF8
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume 8FA5E92E-AD22-4963-A728-00057E6BEB99
                Disk:                  disk1
                Status:                Online
                Size (Total):          350599905280 B (350.6 GB)
                Conversion Progress:   -none-
                Revertible:            Yes (no decryption required)
                LV Name:               Macintosh HD
                Volume Name:           Macintosh HD
                Content Hint:          Apple_HFS
    MiMac:~ Mike$ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 1465149167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640   685490512      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
       685900152     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
       687169688   776709904      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1463879592     1269543        
      1465149135          32         Sec GPT table
      1465149167           1         Sec GPT header
    MiMac:~ Mike$ sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE    0   0   2 -   25 127  14 [         1 -     409639] <Unknown ID>
    2: AC 1023 254  63 - 1023 254  63 [    409640 -  685490512] <Unknown ID>
    3: AB 1023 254  63 - 1023 254  63 [ 685900152 -    1269536] Darwin Boot
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    MiMac:~ Mike$

    Your case may be simpler to resolve. You do not have the MBR entry for Windows.
    Do you a NTFS header "R.NTFS" when you run the following command in Terminal?
    sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C

Maybe you are looking for