CS 4 Upgrade Setup fails
I am trying to upgrade CS4 Standard from CS3. The download seems to have worked fine. Once I run setup, It accepts my serial number and the install begins after about a minute it seems to stop. The install button is highlighted. Clicking the install button starts the install again but it stops. There is no error message it just stops.
I am using Windows XP Pro SP3.
I have uninstalled the program and reinstalled it. I uninstalled CS3 and tried re-installing CS$ same problem. I re-installed CS3 tried again...same problem.
The only other clue I can give you is that I previously installed a trial version of CS4 Dreamweaver. When I went to purchase it, I found I couldn't upgrade to Dreamweaver CS4 from CS3 (Preminum...go figure) So I uninstalled it. Then when Adobe came out with the special for Creative Suite 4 Web Standard, I figured Okay that's only $100 more than Dreamweaver.
I appologize if there is a solution to this somewhere else on the forum, but I haven't found it. I called for phone support. The guy sent me to some page that had nothing to do with my problem and close the case.
Someone Pleeezzze
Terry
Okay, I found the problem. Only took about 12 hours, fortunately very simple. CS4 Extension Manager had been uploaded at some point. I deleted that and the program finished installing. Now if I can figure out how to get a refund for Dreamweaver.
Terry
Similar Messages
-
PASSWORDLESS SSH SETUP fails during Grid installation
Hello,
OS and VM setup:
There are 2 base physical Oracle servers ( Model # Oracle SPARC T4-2 , Solaris 11.1 ). On both machine “Oracle VM for SPARC “ software is installed and logical domains are configured with Solaris 11.1. Oracle RAC 2 node cluster is being setup between the Logical Domain in each servers.
Objective:
We are planning to install and configure Oracle RAC 11g R2 (11.2.0.4) on two Oracle VM machines. Pre-installation check script (runcluvfy.sh) on RAC node is completed without errors/warning.
Issue:
During oracle grid infrastructure installation, SSH setup failing and on shell prompt is showing JVM CRASH AT LIB.....
I am not able to proceed with RAC setup due to this issue.
Your suggestions/assistance will be greatly appreciated.
Thanks.Hello,
Thanks for your reponse. Please find below OUI log:
-------------------------------------------------------- OUI Log ---------------------------------------------------------
Using paramFile: /u01/Stage/grid/install/oraparam.ini
Checking Temp space: must be greater than 180 MB. Actual 190266 MB Passed
Checking swap space: must be greater than 150 MB. Actual 196682 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute /usr/bin/xdpyinfo
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,Continue? (y/n) [n]
>>> Ignoring required pre-requisite failures. Continuing...
The commandline for unzip:
/u01/Stage/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.51.10/1/DataFiles/\*.jar -d /tmp/OraInstall2013-10-30_10-00-46AM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2013-10-30_10-00-46AM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2013-10-30_10-00-46AM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2013-10-30_10-00-46AM/oui/lib/solaris
-Doracle.installer.oui_loc=/tmp/OraInstall2013-10-30_10-00-46AM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/u01/Stage/grid/install
-Doracle.installer.jre_loc=/tmp/OraInstall2013-10-30_10-00-46AM/jdk/jre
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=5.11
-Doracle.install.setup.workDir=/u01/Stage/grid
-Dawt.toolkit=sun.awt.X11.XToolkit
-d64
-mx150m
-cp
/tmp/OraInstall2013-10-30_10-00-46AM::/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/remoteinterfaces.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/instcommon.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/instcrs.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/ssh.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/cvu.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/OraPrereq.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/jsch.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/ojdbc5.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/OraPrereqChecks.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/prov_fixup.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/orai18n-mapping.jar:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/orai18n-utility.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/oneclick.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/share.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/emCfg.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/emocmutl.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/jsch.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ssh.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/remoteinterfaces.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/http_client.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraSuiteInstaller.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatch.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatchactions.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatchprereq.jar:../stage/Components/oracle.swd.opatch/11.2.0.4.0/1/DataFiles/jlib/opatchutil.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/OraCheckPoint.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstImages.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/help4.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/help4-nls.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ewt3.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/swingaccess.jar::/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/jewt4.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/ojmisc.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/xml.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/srvm.jar:/tmp/OraInstall2013-10-30_10-00-46AM/oui/jlib/srvmasm.jar
oracle.install.ivw.crs.driver.CRSInstaller
-scratchPath
/tmp/OraInstall2013-10-30_10-00-46AM
-sourceLoc
/u01/Stage/grid/install/../stage/products.xml
-sourceType
network
-timestamp
2013-10-30_10-00-46AM
-formCluster
INFO: Loading data from: jar:file:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/tmp/OraInstall2013-10-30_10-00-46AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:config-data]
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:configcmds in the bean:configcmdmappings
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Loading condition class oracle.install.commons.flow.condition.SystemPropertyCondition
INFO: Building the flow graph
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state finishupdates
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state autoupdatesDecider
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state supportedOSCheck
INFO: Loaded state ClusterInfoUI
INFO: Loaded state InstallOptionsUI
INFO: Loaded state ChecklistUI
INFO: Loaded state InstallTypeUI
INFO: Loaded state QuickInstallUI
INFO: Loaded state productLanguage
INFO: Loaded state flowDecider
INFO: Loaded state CRSNodeSelectionUI
INFO: Loaded state SCANInformationUI
INFO: Loaded state getASMSNMPPassword
INFO: Loaded state GridPlugPlayInfoUI
INFO: Loaded state CRSNodeInformationUI
INFO: Loaded state getSubnetInformation
INFO: Loaded state ConfigWizard
INFO: Loaded state NetworkInterfaceUI
INFO: Loaded state StorageOptionUI
INFO: Loaded state ASMDiskGroupOption
INFO: Loaded state CreateASMDiskGroup
INFO: Loaded state ASMInstanceCredentialsGUI
INFO: Loaded state OCRStorageUI
INFO: Loaded state VDSKStorageUI
INFO: Loaded state FailureIsolationUI
INFO: Loaded state getPrivilegedOSGroups
INFO: Loaded state preInstallLocation
INFO: Loaded state InstallLocationUI
INFO: Loaded state CRSInstallLocationUI
INFO: Loaded state inventory
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state performChecks
INFO: Loaded state showSummary
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[ASMDiskGroupOption]: route=createdg; to=CreateASMDiskGroup
INFO: State[ASMDiskGroupOption]: route=nocreatedg; to=ASMInstanceCredentialsGUI
INFO: Condition of state[ASMDiskGroupOption]: route=mismatched; to=CreateASMDiskGroup
INFO: State[ASMInstanceCredentialsGUI]: route=FRESH_HA_INSTALL; to=getPrivilegedOSGroups
INFO: State[ASMInstanceCredentialsGUI]: route=IPMI_SUPPORTED; to=FailureIsolationUI
INFO: State[ASMInstanceCredentialsGUI]: route=IPMI_UNSUPPORTED; to=getPrivilegedOSGroups
INFO: Condition of state[ASMInstanceCredentialsGUI]: route=inventory; to=inventory
INFO: Condition of state[ASMInstanceCredentialsGUI]: route=prereq; to=prereqExecutionDecider
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=supportedOSCheck
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[CRSInstallLocationUI]: route=INVENTORY_ABSENT; to=inventory
INFO: State[CRSInstallLocationUI]: route=success; to=prereqExecutionDecider
INFO: Condition of state[CRSInstallLocationUI]: route=matched; to=prereqExecutionDecider
INFO: State[CRSNodeInformationUI]: route=success; to=getSubnetInformation
INFO: State[CRSNodeSelectionUI]: route=GI_HOME_UPGRADE; to=getPrivilegedOSGroups
INFO: State[CRSNodeSelectionUI]: route=NON_GI_HOME_UPGRADE; to=SCANInformationUI
INFO: State[CRSNodeSelectionUI]: route=wizard; to=ConfigWizard
INFO: State[ChecklistUI]: route=success; to=InstallTypeUI
INFO: State[ClusterInfoUI]: route=success; to=QuickInstallUI
INFO: State[ConfigWizard]: route=config; to=NetworkInterfaceUI
INFO: State[ConfigWizard]: route=giupgrade; to=prereqExecutionDecider
INFO: State[ConfigWizard]: route=upgrade; to=SCANInformationUI
INFO: State[CreateASMDiskGroup]: route=success; to=ASMInstanceCredentialsGUI
INFO: State[FailureIsolationUI]: route=success; to=getPrivilegedOSGroups
INFO: State[GridPlugPlayInfoUI]: route=success; to=CRSNodeInformationUI
INFO: State[InstallLocationUI]: route=INVENTORY_ABSENT; to=inventory
INFO: State[InstallLocationUI]: route=success; to=prereqExecutionDecider
INFO: State[InstallOptionsUI]: route=crs; to=InstallTypeUI
INFO: State[InstallOptionsUI]: route=success; to=productLanguage
INFO: State[InstallTypeUI]: route=advanced; to=productLanguage
INFO: State[InstallTypeUI]: route=typical; to=ClusterInfoUI
INFO: Condition of state[InstallTypeUI]: route=matched; to=productLanguage
INFO: State[NetworkInterfaceUI]: route=success; to=StorageOptionUI
INFO: State[OCRStorageUI]: route=success; to=VDSKStorageUI
INFO: State[QuickInstallUI]: route=ASM; to=CreateASMDiskGroup
INFO: State[QuickInstallUI]: route=inventory; to=inventory
INFO: State[QuickInstallUI]: route=prereq; to=prereqExecutionDecider
INFO: State[SCANInformationUI]: route=noupgradeASM; to=getPrivilegedOSGroups
INFO: State[SCANInformationUI]: route=upgradeASM; to=getASMSNMPPassword
INFO: State[StorageOptionUI]: route=ASM; to=ASMDiskGroupOption
INFO: State[StorageOptionUI]: route=SHARED_FILE_SYSTEM; to=OCRStorageUI
INFO: State[UpdatesListUI]: route=success; to=supportedOSCheck
INFO: State[VDSKStorageUI]: route=IPMI_SUPPORTED; to=FailureIsolationUI
INFO: State[VDSKStorageUI]: route=IPMI_UNSUPPORTED; to=getPrivilegedOSGroups
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_DISABLE; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_STATE_SKIP; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=success; to=AutoUpdatesOptionsUI
INFO: Condition of state[autoupdatesDecider]: route=matched; to=InstallOptionsUI
INFO: State[flowDecider]: route=FRESH_CRS_INSTALL; to=GridPlugPlayInfoUI
INFO: State[flowDecider]: route=FRESH_HA_INSTALL; to=CreateASMDiskGroup
INFO: State[flowDecider]: route=SWONLY_INSTALL; to=getPrivilegedOSGroups
INFO: State[flowDecider]: route=UPGRADE_CRS; to=CRSNodeSelectionUI
INFO: State[flowDecider]: route=UPGRADE_HA; to=getASMSNMPPassword
INFO: State[flowDecider]: route=UPGRADE_HA_NO_ASM_PASS; to=getPrivilegedOSGroups
INFO: State[getASMSNMPPassword]: route=success; to=getPrivilegedOSGroups
INFO: State[getPrivilegedOSGroups]: route=success; to=preInstallLocation
INFO: Condition of state[getPrivilegedOSGroups]: route=matched; to=preInstallLocation
INFO: State[getSubnetInformation]: route=success; to=NetworkInterfaceUI
INFO: State[getSubnetInformation]: route=wizard; to=ConfigWizard
INFO: State[init]: route=DOWNLOAD_UPDATES_ONLY; to=AutoUpdatesOptionsUI
INFO: State[init]: route=success; to=autoupdatesDecider
INFO: State[inventory]: route=success; to=prereqExecutionDecider
INFO: State[performChecks]: route=success; to=showSummary
INFO: State[preInstallLocation]: route=CRS_NO; to=InstallLocationUI
INFO: State[preInstallLocation]: route=CRS_YES; to=CRSInstallLocationUI
INFO: Condition of state[preInstallLocation]: route=matched; to=CRSInstallLocationUI
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=performChecks
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=showSummary
INFO: State[productLanguage]: route=productlanguage_yes; to=flowDecider
INFO: Condition of state[productLanguage]: route=matched; to=flowDecider
INFO: State[setup]: route=success; to=finish
INFO: State[showSummary]: route=success; to=setup
INFO: State[supportedOSCheck]: route=success; to=InstallOptionsUI
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=finishupdates
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[UpdatesListUI]: route=DOWNLOAD_UPDATES_FINISHED; to=finishupdates
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Loading flow data beans
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_crs_ClusterNodeList in the bean:CRSInstallSettings
INFO: Setting value for the property:ORACLE_HOME in the bean:CRSInstallSettings
INFO: Setting value for the property:ORACLE_BASE in the bean:CRSInstallSettings
INFO: Setting value for the property:CRSInstallSettings in the bean:CRSSetupBean
INFO: Setting value for the property:oracle_install_asm_DiskGroup in the bean:ASMSettings
INFO: Setting value for the property:ASMSettings in the bean:CRSSetupBean
INFO: Setting value for the property:ORACLE_HOME in the bean:HAInstallSettings
INFO: Setting value for the property:ORACLE_BASE in the bean:HAInstallSettings
INFO: Setting value for the property:HAInstallSettings in the bean:CRSSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:CRSSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:CRSSetupBean
INFO: Setting value for the property:OCMSettings in the bean:CRSSetupBean
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_crs_ClusterNodeList in the bean:CRSInstallSettings
INFO: Setting value for the property:oracle_install_crs_SCANPortNumber in the bean:CRSInstallSettings
INFO: Setting value for the property:oracle_install_crs_VotingDiskRedundancy in the bean:CRSInstallSettings
INFO: Setting value for the property:oracle_install_crs_OCRRedundancy in the bean:CRSInstallSettings
INFO: Setting value for the property:ORACLE_HOME in the bean:CRSInstallSettings
INFO: Setting value for the property:ORACLE_BASE in the bean:CRSInstallSettings
INFO: Setting value for the property:CRSInstallSettings in the bean:CRSSetupBean
INFO: Setting value for the property:oracle_install_asm_DiskGroupAUSize in the bean:oracle_install_asm_DiskGroup
INFO: Setting value for the property:oracle_install_asm_DiskGroup in the bean:ASMSettings
INFO: Setting value for the property:ASMSettings in the bean:CRSSetupBean
INFO: Setting value for the property:ORACLE_HOME in the bean:HAInstallSettings
INFO: Setting value for the property:ORACLE_BASE in the bean:HAInstallSettings
INFO: Setting value for the property:HAInstallSettings in the bean:CRSSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:CRSSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:CRSSetupBean
INFO: Set value for bean CRSSetupBean
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:ORACLE_HOME in the bean:HAInstallSettings
INFO: Setting value for the property:ORACLE_BASE in the bean:HAInstallSettings
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_crs_ClusterNodeList in the bean:CRSInstallSettings
INFO: Setting value for the property:ORACLE_HOME in the bean:CRSInstallSettings
INFO: Setting value for the property:ORACLE_BASE in the bean:CRSInstallSettings
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ChecklistGUI viewId: ChecklistUI uiType: null]
INFO: oracle.install.ivw.crs.view.ChecklistGUI added to View Type Registry with the key as [ChecklistUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.InstallTypeGUI viewId: InstallTypeUI uiType: null]
INFO: oracle.install.ivw.crs.view.InstallTypeGUI added to View Type Registry with the key as [InstallTypeUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.QuickInstallGUI viewId: QuickInstallUI uiType: null]
INFO: oracle.install.ivw.crs.view.QuickInstallGUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.CRSInstallLocationGUI viewId: CRSInstallLocationUI uiType: null]
INFO: oracle.install.ivw.crs.view.CRSInstallLocationGUI added to View Type Registry with the key as [CRSInstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.GridPlugPlayInfoUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.GridPlugPlayInfoUI added to View Type Registry with the key as [GridPlugPlayInfoUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ClusterConfigGUI viewId: ClusterConfigUI uiType: null]
INFO: oracle.install.ivw.crs.view.ClusterConfigGUI added to View Type Registry with the key as [ClusterConfigUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.NetworkInterfaceUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.NetworkInterfaceUI added to View Type Registry with the key as [NetworkInterfaceUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.StorageOptionUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.StorageOptionUI added to View Type Registry with the key as [StorageOptionUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ASMDiskGroupCreationGUI viewId: ASMDiskGroupCreationUI uiType: null]
INFO: oracle.install.ivw.crs.view.ASMDiskGroupCreationGUI added to View Type Registry with the key as [ASMDiskGroupCreationUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.OCRStorageUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.OCRStorageUI added to View Type Registry with the key as [OCRStorageUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.VDSKStorageUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.VDSKStorageUI added to View Type Registry with the key as [VDSKStorageUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.FailureIsolationUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.FailureIsolationUI added to View Type Registry with the key as [FailureIsolationUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ASMInstanceCredentialsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.ASMInstanceCredentialsGUI added to View Type Registry with the key as [ASMInstanceCredentialsGUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.CRSNodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.CRSNodeSelectionUI added to View Type Registry with the key as [CRSNodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.SCANInformationUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.SCANInformationUI added to View Type Registry with the key as [SCANInformationUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ClusterInfoUI viewId: ClusterInfoUI uiType: null]
INFO: oracle.install.ivw.crs.view.ClusterInfoUI added to View Type Registry with the key as [ClusterInfoUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ASMSNMPPasswordGUI viewId: ASMSNMPPasswordGUI uiType: null]
INFO: oracle.install.ivw.crs.view.ASMSNMPPasswordGUI added to View Type Registry with the key as [ASMSNMPPasswordGUI]
INFO: Adding View[type: oracle.install.ivw.common.view.AutoUpdatesOptionsUI viewId: AutoUpdatesOptionsUI uiType: null]
INFO: oracle.install.ivw.common.view.AutoUpdatesOptionsUI added to View Type Registry with the key as [AutoUpdatesOptionsUI]
INFO: Adding View[type: oracle.install.ivw.common.view.UpdatesListUI viewId: UpdatesListUI uiType: null]
INFO: oracle.install.ivw.common.view.UpdatesListUI added to View Type Registry with the key as [UpdatesListUI]
INFO: Adding View[type: oracle.install.ivw.common.view.FinishUpdatesUI viewId: FinishUpdatesUI uiType: null]
INFO: oracle.install.ivw.common.view.FinishUpdatesUI added to View Type Registry with the key as [FinishUpdatesUI]
INFO: Adding View[type: oracle.install.ivw.crs.view.ASMDiskGroupOptionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.crs.view.ASMDiskGroupOptionGUI added to View Type Registry with the key as [ASMDiskGroupOptionUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
ASMSettings oracle.install.asm.bean.ASMSettings@6124e9
35
AutoUpdatesInstallSettings oracle.install.ivw.common.bean.AutoUpdates
InstallSettings@3c03dfcb
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
CRSInstallSettings oracle.install.ivw.crs.bean.CRSInstallSett
ings@1fbbc779
CentralInventorySettings oracle.install.ivw.common.bean.CentralInve
ntorySettings@3435ec9
ClusterNodes {}
ClusterwareType UNKNOWN
DECLINE_SECURITY_UPDATES false
FROM_LOCATION /u01/Stage/grid/install/../stage/products.
xml
HAInstallSettings oracle.install.ivw.ha.bean.HAInstallSettin
gs@1faac07d
MYORACLESUPPORT_PASSWORD *Protected value, not to be logged*
MYORACLESUPPORT_USERNAME
OCMSettings oracle.install.ivw.common.bean.OCMSettings
@411b1d80
ORACLE_BASE /u01/app/oracle/product/11.2.0.4/base
ORACLE_HOME /u01/app/oracle/product/11.2.0.4/grid
ORACLE_HOSTNAME oradbracvm1.mrmwr.gov.om
PROXY_HOST
PROXY_PORT
PROXY_PWD *Protected value, not to be logged*
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
oracle_install_WindowsSystemDirectory
oracle_install_asm_DiskGroup oracle.install.asm.bean.DiskGroupSettings@
3e4ac866
oracle_install_asm_DiskGroupAUSize 1
oracle_install_asm_MigrateASM false
oracle_install_asm_UseExistingDG false
oracle_install_autoupdates_httpProxyPort 0
oracle_install_autoupdates_httpProxySettings oracle.install.ivw.common.bean.HttpProxySe
ttings@2bf09a31
oracle_install_autoupdates_myOracleSupportCredentials oracle.install.ivw.common.bean.MyOracleSup
portSettings@2259a735
oracle_install_autoupdates_selected false
oracle_install_crs_AdvancedInstall false
oracle_install_crs_AutoConfig false
oracle_install_crs_ClusterName
oracle_install_crs_ClusterNodeList
oracle_install_crs_ConfigureGNS true
oracle_install_crs_LaunchASMCA false
oracle_install_crs_LaunchCRSInst false
oracle_install_crs_LaunchCRSUpgrd false
oracle_install_crs_LaunchCluvfy false
oracle_install_crs_LaunchRootBat false
oracle_install_crs_LaunchUpdateNodeList false
oracle_install_crs_OCRLocations {}
oracle_install_crs_OCRRedundancy 2
oracle_install_crs_SCANName
oracle_install_crs_SCANPortNumber 0
oracle_install_crs_StorageOption 0
oracle_install_crs_UseIPMI false
oracle_install_crs_VotingDiskLocations {}
oracle_install_crs_VotingDiskRedundancy 2
oracle_install_crs_isConfigWizard false
oracle_install_crs_isRolling true
INFO: Launching Oracle Grid Infrastructure
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Checking condition at state <autoupdatesDecider>
INFO: Successfully checked condition at state <autoupdatesDecider>
INFO: Checking condition at state <InstallTypeUI>
INFO: Successfully checked condition at state <InstallTypeUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state autoupdatesDecider
INFO: Completed executing action at state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <autoupdatesDecider>
INFO: Completed validating view at state <autoupdatesDecider>
INFO: Validating state <autoupdatesDecider>
WARNING: Validation disabled for the state autoupdatesDecider
INFO: Completed validating state <autoupdatesDecider>
INFO: Reading shiphome metadata from /u01/Stage/grid/install/../stage/shiphomeproperties.xml
INFO: Loading beanstore from file:/u01/Stage/grid/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/u01/Stage/grid/install/../stage/shiphomeproperties.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:shiphome-metadata]
INFO: Setting value for the property:properties in the bean:shiphome-metadata
INFO: Verifying route success
INFO: Get view named [AutoUpdatesOptionsUI]
INFO: View for [AutoUpdatesOptionsUI] is oracle.install.ivw.common.view.AutoUpdatesOptionsUI[,0,0,0x0,invalid,layout=java.awt.FlowLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
INFO: Initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state AutoUpdatesOptionsUI
INFO: Completed executing action at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <AutoUpdatesOptionsUI>
INFO: Completed validating view at state <AutoUpdatesOptionsUI>
INFO: Validating state <AutoUpdatesOptionsUI>
INFO: Completed validating state <AutoUpdatesOptionsUI>
INFO: No updates will be downloaded or applied
INFO: Checking condition at state <InstallTypeUI>
INFO: Successfully checked condition at state <InstallTypeUI>
INFO: Verifying route NO_AUTO_UPDATES
INFO: Checking condition at state <InstallTypeUI>
INFO: Successfully checked condition at state <InstallTypeUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state supportedOSCheck
INFO: Completed executing action at state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <supportedOSCheck>
INFO: Completed validating view at state <supportedOSCheck>
INFO: Validating state <supportedOSCheck>
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Verifying setup for installer validations
INFO: Completed validating state <supportedOSCheck>
INFO: Verifying route success
INFO: Checking condition at state <InstallTypeUI>
INFO: Successfully checked condition at state <InstallTypeUI>
INFO: Get view named [InstallOptionsUI]
INFO: View for [InstallOptionsUI] is oracle.install.ivw.crs.view.InstallOptionsUI@144683c2
INFO: Initializing view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Is CRS Installed false
INFO: Completed initializing view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Displaying view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Completed displaying view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Loading view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Completed loading view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Localizing view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Completed localizing view <InstallOptionsUI> at state <InstallOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state InstallOptionsUI
INFO: InstallOption Action Entering and Exiting execute
INFO: Completed executing action at state <InstallOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <InstallOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: CRS config selected
INFO: Validating view at state <InstallOptionsUI>
INFO: Completed validating view at state <InstallOptionsUI>
INFO: Validating state <InstallOptionsUI>
INFO: getInstallOption: CRS_CONFIG
INFO: Is CRS Installed false
INFO: isCRSInstalled: false
INFO: isHAInstalled: false
INFO: isCRSConfigured: false
INFO: isHAConfigured: false
INFO: isLocalCSSConfigured: false
INFO: existingCRSOrLocalCSSVersion: null
INFO: Completed validating state <InstallOptionsUI>
INFO: Detecting system information
INFO: InstallOptionsAction Actions.transition called
INFO: Verifying route crs
INFO: Checking condition at state <InstallTypeUI>
INFO: Successfully checked condition at state <InstallTypeUI>
INFO: Get view named [InstallTypeUI]
INFO: View for [InstallTypeUI] is oracle.install.ivw.crs.view.InstallTypeGUI[,0,0,0x0,invalid,layout=java.awt.GridBagLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
INFO: Initializing view <InstallTypeUI> at state <InstallTypeUI>
INFO: Completed initializing view <InstallTypeUI> at state <InstallTypeUI>
INFO: Displaying view <InstallTypeUI> at state <InstallTypeUI>
INFO: Completed displaying view <InstallTypeUI> at state <InstallTypeUI>
INFO: checking for 92 RAC existence
INFO: Loading view <InstallTypeUI> at state <InstallTypeUI>
INFO: Completed loading view <InstallTypeUI> at state <InstallTypeUI>
INFO: Localizing view <InstallTypeUI> at state <InstallTypeUI>
INFO: Gathering system details...
INFO: Completed localizing view <InstallTypeUI> at state <InstallTypeUI>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state InstallTypeUI
INFO: Waiting for completion all forked tasks at state InstallTypeUI
INFO: All forked task are completed at state InstallTypeUI
INFO: Completed background operations
INFO: Executing action at state InstallTypeUI
INFO: Completed executing action at state <InstallTypeUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <InstallTypeUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <InstallTypeUI>
INFO: Completed validating view at state <InstallTypeUI>
INFO: Validating state <InstallTypeUI>
INFO: Completed validating state <InstallTypeUI>
INFO: Verifying route advanced
INFO: Checking condition at state <productLanguage>
INFO: Successfully checked condition at state <productLanguage>
INFO: Checking condition at state <getPrivilegedOSGroups>
INFO: Successfully checked condition at state <getPrivilegedOSGroups>
INFO: Checking condition at state <preInstallLocation>
INFO: Successfully checked condition at state <preInstallLocation>
INFO: Checking condition at state <CRSInstallLocationUI>
INFO: Successfully checked condition at state <CRSInstallLocationUI>
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@3ff5d699
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [ar, en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Checking condition at state <getPrivilegedOSGroups>
INFO: Successfully checked condition at state <getPrivilegedOSGroups>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state flowDecider
INFO: Completed executing action at state <flowDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <flowDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <flowDecider>
INFO: Completed validating view at state <flowDecider>
INFO: Validating state <flowDecider>
WARNING: Validation disabled for the state flowDecider
INFO: Completed validating state <flowDecider>
INFO: Verifying route FRESH_CRS_INSTALL
INFO: Checking condition at state <getPrivilegedOSGroups>
INFO: Successfully checked condition at state <getPrivilegedOSGroups>
INFO: Checking condition at state <preInstallLocation>
INFO: Successfully checked condition at state <preInstallLocation>
INFO: Checking condition at state <CRSInstallLocationUI>
INFO: Successfully checked condition at state <CRSInstallLocationUI>
INFO: Get view named [GridPlugPlayInfoUI]
INFO: View for [GridPlugPlayInfoUI] is oracle.install.ivw.crs.view.GridPlugPlayInfoUI@42293b53
INFO: Initializing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: GridPlugPlayInfoUI entering onEvent
INFO: Gathering system details...
INFO: Gathering system details...
INFO: Gathering system details...
INFO: Gathering system details...
INFO: Gathering system details...
INFO: checking for 92 RAC existence
INFO: Gathering system details...
INFO: Completed initializing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: Displaying view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: Completed displaying view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: Loading view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: GridPlugPlayInfoUI entering onEvent
INFO: Completed loading view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: Localizing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: Completed localizing view <GridPlugPlayInfoUI> at state <GridPlugPlayInfoUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state GridPlugPlayInfoUI
INFO: Completed executing action at state <GridPlugPlayInfoUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <GridPlugPlayInfoUI>
INFO: Bad Chars Found :_
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: GridPlugPlayInfoUI entering processInput
INFO: Validating view at state <GridPlugPlayInfoUI>
INFO: Completed validating view at state <GridPlugPlayInfoUI>
INFO: Validating state <GridPlugPlayInfoUI>
INFO: Validating Cluster Name
INFO: Validating SCAN Information
INFO: validating SCAN name for emptiness and bad chars
INFO: validating SCAN port for emptiness
INFO: validating SCAN port for bad characters
INFO: checking for 92 RAC existence
INFO: Gathering system details...
INFO: Environment variable SKIP_ALL_SCAN_VIP_VALIDATION is not set.
INFO: Validating SCAN VIP
INFO: Completed validating state <GridPlugPlayInfoUI>
INFO: Verifying route success
INFO: GridPlugPlayInfoUI entering onEvent
INFO: Get view named [ClusterConfigUI]
INFO: View for [ClusterConfigUI] is oracle.install.ivw.crs.view.ClusterConfigGUI@2a134eca
INFO: Initializing view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Completed initializing view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Displaying view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Completed displaying view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Loading view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Completed loading view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Localizing view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Completed localizing view <ClusterConfigUI> at state <CRSNodeInformationUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state CRSNodeInformationUI
INFO: Checking cluster configuration details
INFO: checking for 92 RAC existence
INFO: Gathering system details...
INFO: Gathering system details...
INFO: Completed executing action at state <CRSNodeInformationUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <CRSNodeInformationUI>
INFO: SSH Support Manager logs will be written to /tmp/OraInstall2013-10-30_10-00-46AM/sshsetup1_2013-10-30_10-00-46AM.log
INFO: Establishing SSH connectivity between the selected nodes. This may take several minutes. Please wait...
INFO: SSH Setup policy used: BIDIRECTIONAL
------------------------------------------------------------ End OUI Logs -----------------------------------------------------------------------------------
Thanks. -
Satellite Pro A200 - Supervisor Password Utility Setup fails
Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
BIOS version is now 2.20-WIN32
After the successful installation of the operating system, I started installing the various drivers and utilities downloading them from the Toshiba site.
When I try to install the "Supervisor Password Utility" the setup fails showing a message box which says "The serial number is invalid".
Same problem with another setup: "Flash Cards Support Utility"
Does anybody know how to solve this problem and which serial number is invalid?
Thanx in advance,
mme000Hi,
You are having the same trouble as other people on these forums.
If you want to fix it yourself, you would need to look at the disk image on the disk that came with your toshiba, figure out which version of the application was included on that, you might be able to find that version on the website for a different model and different country (for instance, on the canadian website, for a totally different computer than my UK computer, i found a version of the flashcards support utility that works with mine.) But i don't think its possible to see what's on the restore disk without instaling it, i.e. wiping everything off your harddrive in the process.
It really is extremely disappointing and frustrating. If anyone knows a way to communicate directly with toshiba about this problem without having to pay some sort of support fee, I would be very interested to hear about it. It seems noone from toshiba actually reads anything from these forum. It seems like a real wasted resource to me....
Message was edited by: ADMIN -
Office 365 Pro Plus - Setup Failed Error - Network Deployment Share Method
Hello,
We recently deployed Office 365 Pro Plus utilizing the network share method. The issue we are experiencing is occuring after uninstalling Office 365. When we try to reinstall 365 on the same PC, the setup states "Setup Failed - A newer version
of Setup is required to install this product"
Here is our currentl XML script:
<Configuration>
<Add SourcePath=\\WDS.contoso.com\O365Deployment OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" UpdatePath=\\WDS.contoso.com\O365Deployment />
<Display Level="FULL" AcceptEULA="TRUE" />
<!--Logging Path="\\WDS.contoso.com\O365Deployment\LOGS" Name=%computername%.txt-->
<!--Property Name="AUTOACTIVATE" Value="1" /-->
</Configuration>
Any help would be greatly appreciated!Hi,
Would you like to give me the whole error message? Please see the "Troubleshoot specific errors in Office 365 ProPlus",we can find the resolution of
Internet Connection Required.
Since you want to install or deploy the Office 365 pro plus, please read the following articles and check they are helpful.
http://technet.microsoft.com/en-us/library/gg715562(v=office.15).aspx
http://blogs.technet.com/b/office_resource_kit/archive/2013/08/08/how-to-deploy-office-365-proplus-from-an-on-premises-web-portal.aspx
http://www.microsoftvirtualacademy.com/training-courses/office-365-deployment-for-it-pros
http://community.office365.com/en-us/w/upgrade/installing-office-365-proplus-with-the-office-deployment-tool.aspx
Regards,
George Zhao
TechNet Community Support -
Trying to upgrade server 2012 with RDS role on it, to server 2012 R2.
It stays for a while on step "Collecting files, settings, and applications 0%"
and then returns the error:
Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest update
Installed all the latest updates, rebooted, also tried to to run setup with local admin, still the same.
Setup logs contain user profile related errors:
[0x08039d] MIG Cannot add mapping for user profile C:/Users/Administrator.001. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class
UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]2014-08-17 03:30:13, Error [0x080801] MIG User profile loading error. Aborting
due to external request.[gle=0x000000cb]I was able to get past "Collecting files, settings, and applications 0%" by disabling user profile disks, but then on reboot I got another error:
Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
Setuperr.log
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:11:43, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:15:12, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2014-08-17 04:15:23, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2014-08-17 04:15:23, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2014-08-17 08:52:44, Error Mig::CUpgradeTransportPlatform::SetUserContext: Offline platform failed to set the user context
USER00000000[gle=0x000000cb]
2014-08-17 08:52:44, Error MIG Mig::CKnowledgeManager::BeginProcessingContext: Source platform failed to set the user context USER00000000[gle=0x000000cb]
2014-08-17 08:52:44, Error MigApply caught exception: Win32Exception: Can't switch to requested user context: USER00000000.:
A device attached to the system is not functioning. [0x0000001F] int __cdecl Mig::CKnowledgeManager::Apply(class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CUserMappingList *,class UnBCL::Hashtable<class UnBCL::String *,class
UnBCL::String *> *,class Mig::CAgentManager *,struct IMigExecuteProgress *)[gle=0x000000cb]
2014-08-17 08:52:44, Error MIG pDoOnlineApply: Apply operation failed. Error: 0x00000004[gle=0x000000cb]
2014-08-17 08:52:44, Error [0x0802f5] MIG CMediaManager::Close: m_pSelectedTransport->Close(1) failed with Exception Win32Exception: Device was open with readonly access.: Access is denied. [0x00000005] void
__cdecl Mig::CMediaManager::CloseTransport(int)
void __cdecl Mig::CUNCTransport::Close(int).[gle=0x000000cb]
2014-08-17 08:52:44, Error MigCloseCurrentStore caught exception: Win32Exception: Device was open with readonly access.:
Access is denied. [0x00000005] void __cdecl Mig::CMediaManager::CloseTransport(int)
void __cdecl Mig::CUNCTransport::Close(int)[gle=0x000000cb]
2014-08-17 08:52:47, Error MIG Callback_ApplyNewSysMachineSpecific: Migration phase failed. -
Upgrade are failed!; WRT54G_v2
130228_1900est
hello,
just troed to update FIRMWARE re our WRT54G_v2
current FIRMWARE
Firmware Version: v3.37.7
downloaded and tried to run
130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg'
Upgrade are failed!;
WHAT'S WRONG?
Thanks,
Steveg722
USA_RI_02917
Solved!
Go to Solution.130301_0242est
@jlbjlb
seems the link you put is simply the procedure to upgrade the ROUTER FIRMWARE
I am following steps to do what CISCO calls a MANUAL UPGRADE (downloaded the .bin file for WRT54G_v2; Open ROUTER Setup; Go to FIRMWARE UPGRADE; browsed to the .bin file; hit UPGRADE)
THIS TIME, reset then powered down then up the ROUTER
tried to to run the upgrade again but AGAIN, Upgrade are failed!
Does anybody know what the problem is her and how I can get the FIRMWARE updated?
Hope so. -
How to recover mbrd_e1t1_vic_connect: setup failed on cisco 2811 routers
Dear All Experts
I have three cisco 2811 routers, Router A has both 4 FXS & 4FXO port , Router B & Router C have 4 FXS port. connect with Alcatel PABX.
Now, the problem is ph lines are down after 3 days or more. Whenever down, i try to refresh voice port , with " shut & no shut " on each routers.Now i face the problem that is whenever i make shut & no shut on Router B site, ph line is ok there. But in Router C site , ph line is down. So i refresh @ Router C site,ph line is ok but in the router B site , ph line is down again.
I try several ways for shut & no shut. i have no idea. i checked log file on Router A , here is
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0pt 5.4pt 0pt 5.4pt;
mso-para-margin:0pt;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Aug 18 16:03:55.306 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:03:55.306 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/0), dsp_channel(/0
/0/0)
Aug 18 16:12:56.331 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:12:56.331 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/0), dsp_channel(/0
/0/0)
Aug 18 16:12:56.335 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:12:56.335 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/0), dsp_channel(/0
/0/0)
Aug 18 16:14:37.405 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:14:37.405 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/2), dsp_channel(/0
/0/0)
Aug 18 16:19:40.278 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:19:40.278 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/0), dsp_channel(/0
/0/0)
Aug 18 16:22:34.597 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:22:34.597 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/2), dsp_channel(/0
/0/0)
Aug 18 16:36:37.065 UTC: mbrd_e1t1_vic_connect: setup failed
Aug 18 16:36:37.065 UTC: flex_dsprm_tdm_xconn: voice-port(0/3/0), dsp_channel(/0
/0/0)
So give me advise & guide to recover this problem . I have really big problem now. help me!
thanks a lotHere it's sh ver .All three routers are same version , flash, model except RouterB & C has only 4 FXS voice interface.
RouterA#sh ver
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(8), RE
EASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 15-May-06 14:54 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
RouterA uptime is 12 weeks, 1 day, 23 hours, 11 minutes
System returned to ROM by reload at 08:59:03 UTC Wed May 26 2010
System restarted at 09:01:16 UTC Wed May 26 2010
System image file is "flash:c2800nm-spservicesk9-mz.124-8.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2811 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FHK0949F1W9
2 FastEthernet interfaces
4 Serial(sync/async) interfaces
4 Voice FXO interfaces
4 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
RouterA#sh flash
-#- --length-- -----date/time------ path
1 26725176 Dec 2 2005 09:30:24 +06:30 c2800nm-spservicesk9-mz.123-11.T8.bin
2 1646 Dec 2 2005 09:39:00 +06:30 sdmconfig-2811.cfg
3 4052480 Dec 2 2005 09:39:22 +06:30 sdm.tar
4 812032 Dec 2 2005 09:39:38 +06:30 es.tar
5 1007616 Dec 2 2005 09:39:52 +06:30 common.tar
6 1038 Dec 2 2005 09:40:06 +06:30 home.shtml
7 113152 Dec 2 2005 09:40:18 +06:30 home.tar
8 511939 Dec 2 2005 09:40:32 +06:30 128MB.sdf
9 28532876 Jul 5 2006 05:12:32 +06:30 c2800nm-spservicesk9-mz.124-8.bin
10 10829 Aug 9 2010 14:03:44 +06:30 tftp
2228224 bytes available (61788160 bytes used)
it seems to be upgrade IOS version 123--11.T8 to 124-8 . I'm not exactly know the history of these routers. -
Java 2 runtime Environment setup failed with a return code of -1
Hi!
I have tried to install sdk 1_3_1_01 on Windows 2000 with ServicePack 2 and the error "Java 2 runtime Environment setup failed with a return code of -1" occured. As I saw, a lot of people has the problem but couldn't find a solution on this page!
Please help !
MeI've installed 1.3.1_01 on both W2K Workstation and Server, no problem. There's a bug report, but no workaround or solution.
http://developer.java.sun.com/developer/bugParade/bugs/4412291.html
and it's supposedly 'fixed' in 1.4.0 beta.
http://java.sun.com/j2se/1.4/fixedbugs/fixedbugs-beta2.html
You might try installing the beta version
http://java.sun.com/j2se/ -
Windows 8 Upgrade Assistant failed on Satellite P775
I tried running the Windows 8 Upgrade Assistant on my Satellite P775.
It started by displaying
Checking Components; download Windows 8 Components data.
Reading Components.
Got component TOSHIBA Wireless LAN Indicator
... etc ...
Got Component TOSHIBA Contrasena de supervisor
Reading Windows Components.
then displayed a Message Box
"Failed to read Target (Windows 8) INI file."
How can I solve this?
ThanksThanks for the reply.
Yes I followed that procedure.
My model is Satellite P775-112 PSBY3E and is listed as being compatible
After installing Windows 8, I noticed that the DVD drive was no longer accessible, as described in the following thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68222&tstart=0
So I disabled the Windows Service "Toshiba Optical Disc Drive Service" (TODDSrv.exe 1.0.0.8), and the DVD drive is now visible. However Toshiba Video Player still does not work (says it has compatibility issues) and I can not view DVD videos.
I then ran the Windows 8 Upgrade Assistant, which failed immediately with the error "Failed to read Target (Windows 8) INI file".
I found some posts on the forum with a similar error with the Windows 7 Upgrade Assistant (Failed to read Target (Windows 7) INI file. None of the posts has a clear description of what this error means but I've tried all of the suggestions.
Here's a list of what I've tried:
- Rebooted
- Upgraded BIOS to latest version (2.10)
- Run Upgrade Assistant as Administrator
- Run Upgrade Assistant with "Toshiba Optical DIsc Drive Service TODDSrv.exe 1.0.0.8 started or stopped.
My main problems at the moment are:
- Toshiba Optical DIsc Drive Service causes DVD drive to disappear
- Toshiba Video Player won't run
- No way to view DVDs
I'd be happy to install the drivers and applications individually if the Upgrade Assistant doesn't work - is there anywhere I can download them? -
I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!
Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems. -
E-Mail Setup fails to launch on Nokia X6
Hello folks,
On my Nokia X6, when I try to configure an email account using Nokia Messaging, Email setup fails to launch.
I tried configuring from "Messaging" and here after configuring, when I click on "Connect", it doesn't connect.
If I select Settings for an already created mailbox, from "Messaging" --> Options --> Email Setup --> Mailbox --> Google --> Settings, I get the following message "Messaging: Feature not supported".
Please help. Any advice would be appreciated.
Thanks
Solved!
Go to Solution.I myself found the resolution found on other discussion threads,
Do one of the following ( 2nd Option worked for me, Remember to take backup before going with the 2nd option as it erases all contacts)
Try resetting the phone here is codes back up data
start from top and work down
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for all operations listed here is 12345
2. *#7370# - Reformat your phone
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) -
When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
VS Community With Update 4: Uninstall/Repair: "Setup Failed"
So, I may have goofed up this time. So let's start from the beginning. I installed VS Community W/ Update 4 about a month or two ago. (I installed portions on my external because I want to save space on my SSD). I uninstalled it because I didn't think I
would need it again. When uninstalling VS it wouldn't fully uninstall (I think I uninstalled some components in the incorrect order). Now when I try to repair it or uninstall VS, I get this message: "Setup Failed! install cannot continue because required
components failed".
I am trying to re-install VS so I can use it for another project. I checked a few sources online, but nothing seems to make any sense or simply is not ineffective. Can some one help make sense of this?Hi ntnguyen.victory,
According to the name of the installer "vs2013.4.exe", I think what you download is the update 4 for VS2013 instead of VS2013 with update 4.
You can check the update 4 download page:https://www.microsoft.com/en-us/download/details.aspx?id=44921
and the VS2013 with update 4 download page:http://www.visualstudio.com/downloads/download-visual-studio-vs
So when you right clicked file vs2013.4.exe in that folder, cliked Run as Administrator, it didn't work because you didn't install VS2013.
Please download VS2013 with update 4 with the link I paste.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
What hardware is required to setup Fail over cluster using windows 2003 enterprise edition.
I want to setup fail over cluster...i have already installed HP 350 G6 server in my environment. now i want to know which hardware i may require to setup failover cluster for statefull application. and secondly, does my existing server can be utilized .
AN Update:
The Oracle Universal Installer shows the following in the screen before the error appears:
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
\MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
m
toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
.................................................Val: 0
. 79% Done.
Copy successful
Setup in progress (Wed Mar 02 16:26:05 IST 2011)
.....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
opmnctl: opmn started
Please help me.
Thanks and regards,
Adm
Maybe you are looking for
-
Adding a new tab to CrystalReportViewer and loading a new rpt into it
Hi, I've been struggling with the following problem for a few days now and I would really appreciate any help you can offer. I need to add a new tab to an existing instance of CrystalReportViewer and load a new crystal report (RPT) into it. I wasn't
-
Pictures load on all other browsers but not safari
Hi, For some reason when I view my virtual tour webpages on safari the thumbnails on the bottom bar don't load first time. I need to refresh the page (but this doesn't work every time) or re enter the web address to get the thumbnails to appear. I do
-
How to convert String date to java sql date
I have an html form for entering the Date on retreving that value in a java servlet i get it as a string i want to convert that date to SQL date format so that i could use setDate() method of the java.sql.Date class to update the date value in the da
-
Windows Vista RC1 x64 and Audi
Anyone gotten their Audigy2 to work under this version? If so, please share what you did to get it to a state where you have sound. I've been installing/uninstalling and reinstalling for two days now, but I have NO sound. Oddly enough... the game por
-
Process=Multi Approval without hollidays
Good Afternoon! I have IDM 8.1 and I want implement in a workflow the process "Multi Approval", but in the argument "timeout" only I can put the numbers in minutes in that the proccess is active, I want to know how I can only include the days without